Euromat 99, Microstructures, Mechanical Properties and Processes

Download Euromat 99, Microstructures, Mechanical Properties and Processes PDF Online Free

Author :
Publisher : John Wiley & Sons
ISBN 13 : 9783527301225
Total Pages : 440 pages
Book Rating : 4.3/5 (12 download)

DOWNLOAD NOW!


Book Synopsis Euromat 99, Microstructures, Mechanical Properties and Processes by : Yves Bréchet

Download or read book Euromat 99, Microstructures, Mechanical Properties and Processes written by Yves Bréchet and published by John Wiley & Sons. This book was released on 2000-07-13 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relation between microstructures and mechanical properties has always been a challenge for materials science. Modelling the formation, properties and long term stability of microstructures is one of the most impressive and promising advances of modern materials science. This book presents recent advances and challenges in this fast evolving cross disciplinary field. It addresses applications of classical physical metallurgy, and the need for new modelling approaches, both on the analytical viewpoint and on the simulation side.

Unit Manufacturing Processes

Download Unit Manufacturing Processes PDF Online Free

Author :
Publisher : National Academies Press
ISBN 13 : 0309176670
Total Pages : 228 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!


Book Synopsis Unit Manufacturing Processes by : National Research Council

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Nickel, Cobalt, and Their Alloys

Download Nickel, Cobalt, and Their Alloys PDF Online Free

Author :
Publisher : ASM International
ISBN 13 : 0871706857
Total Pages : 450 pages
Book Rating : 4.8/5 (717 download)

DOWNLOAD NOW!


Book Synopsis Nickel, Cobalt, and Their Alloys by : Joseph R. Davis

Download or read book Nickel, Cobalt, and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.

Microstructure, Property and Processing of Functional Ceramics

Download Microstructure, Property and Processing of Functional Ceramics PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 3642016944
Total Pages : 342 pages
Book Rating : 4.6/5 (42 download)

DOWNLOAD NOW!


Book Synopsis Microstructure, Property and Processing of Functional Ceramics by : Qingrui Yin

Download or read book Microstructure, Property and Processing of Functional Ceramics written by Qingrui Yin and published by Springer Science & Business Media. This book was released on 2010-06-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure, Property and Processing of Functional Ceramics describes the preparation, property and local structure microscopy of functional ceramics. It covers functional ceramic fabrication processing, grain boundary phenomena and micro-, nanoscale structures characterizations including scanning electron acoustic microscopy, scanning probe acoustic microscopy and piezoresponse force microscopy. This book is intended for advanced undergraduates, graduates and researchers in the field of materials science, microelectronics, optoelectronics and microscopy. Qingrui Yin and Binghe Zhu both are professors at the Shanghai Institute of Ceramics, Chinese Academy of Sciences; Dr. Huarong Zeng is an associate professor at the Shanghai Institute of Ceramics, Chinese Academy of Sciences.

Nanostructured Metals and Alloys

Download Nanostructured Metals and Alloys PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 0857091123
Total Pages : 840 pages
Book Rating : 4.8/5 (57 download)

DOWNLOAD NOW!


Book Synopsis Nanostructured Metals and Alloys by : S H Whang

Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties.One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying.With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.

Stainless Steel

Download Stainless Steel PDF Online Free

Author :
Publisher : Nova Science Pub Incorporated
ISBN 13 : 9781634820806
Total Pages : 241 pages
Book Rating : 4.8/5 (28 download)

DOWNLOAD NOW!


Book Synopsis Stainless Steel by : Animesh Kumar Basak

Download or read book Stainless Steel written by Animesh Kumar Basak and published by Nova Science Pub Incorporated. This book was released on 2015-04-01 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steel, termed as the "miracle metal" is all around us in numerous applications ranging from everyday household items to sophisticated biomedical applications. Stainless steel is one of the fastest growing segments in metal industries. New developments and a wide range of research on stainless steel is taking place all around the world in order to obtain superior quality stainless steel and expand its applications to meet growing demands. Taking those facts into account, this book is compiles recent developments in the properties, applications and further processing of stainless steel and recent research trends. The book includes high-tech characterisation techniques of stainless steel to address the decomposition behaviour; decomposition-induced transformation to the correlated property-microstructure; powder metallurgy to produce difficult-to-cast stainless steel components, depassivation / repassivation behaviour, various surface treatment processes as well as a wide range of machining techniques to address the need of machinability of stainless steel.

Microstructure And Properties Of Materials, Vol 2

Download Microstructure And Properties Of Materials, Vol 2 PDF Online Free

Author :
Publisher : World Scientific Publishing Company
ISBN 13 : 9813105658
Total Pages : 454 pages
Book Rating : 4.8/5 (131 download)

DOWNLOAD NOW!


Book Synopsis Microstructure And Properties Of Materials, Vol 2 by : James C M Li

Download or read book Microstructure And Properties Of Materials, Vol 2 written by James C M Li and published by World Scientific Publishing Company. This book was released on 2000-10-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials.There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials.Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.

Powder Metallurgy Stainless Steels

Download Powder Metallurgy Stainless Steels PDF Online Free

Author :
Publisher : ASM International
ISBN 13 : 1615030522
Total Pages : 247 pages
Book Rating : 4.6/5 (15 download)

DOWNLOAD NOW!


Book Synopsis Powder Metallurgy Stainless Steels by : Erhard Klar

Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Aluminum-Lithium Alloys

Download Aluminum-Lithium Alloys PDF Online Free

Author :
Publisher : Butterworth-Heinemann
ISBN 13 : 0124016790
Total Pages : 596 pages
Book Rating : 4.1/5 (24 download)

DOWNLOAD NOW!


Book Synopsis Aluminum-Lithium Alloys by : N Eswara Prasad

Download or read book Aluminum-Lithium Alloys written by N Eswara Prasad and published by Butterworth-Heinemann. This book was released on 2013-09-20 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because lithium is the least dense elemental metal, materials scientists and engineers have been working for decades to develop a commercially viable aluminum-lithium (Al-Li) alloy that would be even lighter and stiffer than other aluminum alloys. The first two generations of Al-Li alloys tended to suffer from several problems, including poor ductility and fracture toughness; unreliable properties, fatigue and fracture resistance; and unreliable corrosion resistance. Now, new third generation Al-Li alloys with significantly reduced lithium content and other improvements are promising a revival for Al-Li applications in modern aircraft and aerospace vehicles. Over the last few years, these newer Al-Li alloys have attracted increasing global interest for widespread applications in the aerospace industry largely because of soaring fuel costs and the development of a new generation of civil and military aircraft. This contributed book, featuring many of the top researchers in the field, is the first up-to-date international reference for Al-Li material research, alloy development, structural design and aerospace systems engineering. - Provides a complete treatment of the new generation of low-density AL-Li alloys, including microstructure, mechanical behavoir, processing and applications - Covers the history of earlier generation AL-Li alloys, their basic problems, why they were never widely used, and why the new third generation Al-Li alloys could eventually replace not only traditional aluminum alloys but more expensive composite materials - Contains two full chapters devoted to applications in the aircraft and aerospace fields, where the lighter, stronger Al-Li alloys mean better performing, more fuel-efficient aircraft

Titanium Alloys

Download Titanium Alloys PDF Online Free

Author :
Publisher : BoD – Books on Demand
ISBN 13 : 9535111108
Total Pages : 160 pages
Book Rating : 4.5/5 (351 download)

DOWNLOAD NOW!


Book Synopsis Titanium Alloys by : Jan Sieniawski

Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.

Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017

Download Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017 PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3319668668
Total Pages : 363 pages
Book Rating : 4.3/5 (196 download)

DOWNLOAD NOW!


Book Synopsis Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017 by : Mirko Meboldt

Download or read book Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications - AMPA2017 written by Mirko Meboldt and published by Springer. This book was released on 2017-09-05 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings exchange ideas and knowledge among engineers, designers and managers on how to support real-world value chains by developing additive manufactured series products. The papers from the conference show a holistic, multidisciplinary view.

Random Heterogeneous Materials

Download Random Heterogeneous Materials PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 1475763557
Total Pages : 720 pages
Book Rating : 4.4/5 (757 download)

DOWNLOAD NOW!


Book Synopsis Random Heterogeneous Materials by : Salvatore Torquato

Download or read book Random Heterogeneous Materials written by Salvatore Torquato and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text presents a unified approach of treating the microstructure and effective properties of heterogeneous media. Part I deals with the quantitative characterization of the microstructure of heterogeneous via theoretical methods; Part II treats a wide variety of effective properties of heterogeneous materials and how they are linked to the microstructure, accomplished by using rigorous methods.

Additively Manufactured Inconel 718

Download Additively Manufactured Inconel 718 PDF Online Free

Author :
Publisher : Linköping University Electronic Press
ISBN 13 : 9176853837
Total Pages : 82 pages
Book Rating : 4.1/5 (768 download)

DOWNLOAD NOW!


Book Synopsis Additively Manufactured Inconel 718 by : Dunyong Deng

Download or read book Additively Manufactured Inconel 718 written by Dunyong Deng and published by Linköping University Electronic Press. This book was released on 2018-01-24 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM), also known as 3D printing, has gained significant interest in aerospace, energy, automotive and medical industries due to its capabilities of manufacturing components that are either prohibitively costly or impossible to manufacture by conventional processes. Among the various additive manufacturing processes for metallic components, electron beam melting (EBM) and selective laser melting (SLM) are two of the most widely used powder bed based processes, and have shown great potential for manufacturing high-end critical components, such as turbine blades and customized medical implants. The futures of the EBM and SLM are doubtlessly promising, but to fully realize their potentials there are still many challenges to overcome. Inconel 718 (IN718) is a nickel-base superalloy and has impressive combination of good mechanical properties and low cost. Though IN718 is being mostly used as a turbine disk material now, the initial introduction of IN718 was to overcome the poor weldability of superalloys in 1960s, since sluggish precipitation of strengthening phases ?’/?’’ enables good resistance to strain-age cracking during welding or post weld heat treatment. Given the similarity between AM and welding processes, IN718 has been widely applied to the metallic AM field to facilitate the understandings of process-microstructure-property relationships. The work presented in this licentiate thesis aims to better understand microstructures and mechanical properties EBM and SLM IN718, which have not been systematically investigated. Microstructures of EBM and SLM IN718 have been characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and correlated with the process conditions. Monotonic mechanical properties (e.g., Vickers microhardness and tensile properties) have also been measured and rationalized with regards to the microstructure evolutions before and after heat treatments. For EBM IN718, the results show the microstructure is not homogeneous but dependant on the location in the components, and the anisotropic mechanical properties are probably attributed to alignment of porosities rather than texture. Post heat treatment can slightly increase the mechanical strength compared to the as-manufactured condition but does not alter the anisotropy. SLM IN718 shows significantly different microstructure and mechanical properties to EBM IN718. The as-manufactured SLM IN718 has very fine dendritic microstructure and Laves phases in the interdendrites, and is “work-hardened” by the residual strains and dislocations present in the material. Mechanical properties are different between horizontally and vertically built samples, and heat treatment can minimize this difference. Results from this licentiate thesis provide the basis for the further research on the cyclic mechanical properties of EBM and SLM IN718, which would be the focus of following phase of the Ph.D. research.

Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures

Download Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 9780792321958
Total Pages : 646 pages
Book Rating : 4.3/5 (219 download)

DOWNLOAD NOW!


Book Synopsis Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures by : Michael Anthony Nastasi

Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures written by Michael Anthony Nastasi and published by Springer Science & Business Media. This book was released on 1993 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the emerging class of new materials characterized by ultra-fine microstrucures. The NATO ASI which produced this book was the first international scientific meeting devoted to a discussion of the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Topics covered include superplasticity, tribology, and the supermodulus effect. Review chapters cover a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties. Much of the work is concerned with the issue of how far conventional techniques and concepts can be extended toward atomic scale probing. Another key issue concerns the structure of nanocrystalline materials, in particular, what is the structure and composition of the internal boundaries. These ultra-fine microstructures have proved to challenge even the finest probes that the materials science community has today.

Ceramic Fibers and Coatings

Download Ceramic Fibers and Coatings PDF Online Free

Author :
Publisher : National Academies Press
ISBN 13 : 0309569036
Total Pages : 112 pages
Book Rating : 4.3/5 (95 download)

DOWNLOAD NOW!


Book Synopsis Ceramic Fibers and Coatings by : Committee on Advanced Fibers for High-Temperature Ceramic Composites

Download or read book Ceramic Fibers and Coatings written by Committee on Advanced Fibers for High-Temperature Ceramic Composites and published by National Academies Press. This book was released on 1998-05-05 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature ceramic fibers are the key components of ceramic matrix composites (CMCs). Ceramic fiber properties (strength, temperature and creep resistance, for example)-along with the debonding characteristics of their coatings-determine the properties of CMCs. This report outlines the state of the art in high-temperature ceramic fibers and coatings, assesses fibers and coatings in terms of future needs, and recommends promising avenues of research. CMCs are also discussed in this report to provide a context for discussing high-temperature ceramic fibers and coatings.

Ceramic Microstructures

Download Ceramic Microstructures PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 9780412431401
Total Pages : 618 pages
Book Rating : 4.4/5 (314 download)

DOWNLOAD NOW!


Book Synopsis Ceramic Microstructures by : W.E. Lee

Download or read book Ceramic Microstructures written by W.E. Lee and published by Springer Science & Business Media. This book was released on 1994-10-31 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text deals with the effect of processing on the microstructure and properties of advanced structural and electroceramic materials. It fulfils the need for a well illustrated book explaining the relation between microstructure and properties in structural ceramics, featuring high quality micrographs and characterization techniques.

Statistical Analysis of Microstructures in Materials Science

Download Statistical Analysis of Microstructures in Materials Science PDF Online Free

Author :
Publisher : John Wiley & Sons
ISBN 13 : 0471974862
Total Pages : 420 pages
Book Rating : 4.4/5 (719 download)

DOWNLOAD NOW!


Book Synopsis Statistical Analysis of Microstructures in Materials Science by : Joachim Ohser

Download or read book Statistical Analysis of Microstructures in Materials Science written by Joachim Ohser and published by John Wiley & Sons. This book was released on 2000-12-19 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation of the origin and formation of microstructures and the effect that microstructure has on the properties of materials are important issues in materials science and technology. Geometrical analysis is often the key to understanding the formation of microstructures and the resulting material properties. The authors make use of mathematical morphology, spatial statistics, image processing, stereology and stochastic geometry to analyze microstructures arising in materials science. * Quantitative microstructure analysis is one of the most successful experimental techniques in materials science * Uses examples to demonstrate the techniques * Program code included enables the reader to apply the numerous algorithms * Accessible to material scientists with limited statistical knowledge Primarily aimed at applied materials scientists, the book will also appeal to those working and researching in earth sciences, material technology, mineralogy, petrography, image analysis, cytology and biology.