Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Metallic Glasses And Their Composites
Download Metallic Glasses And Their Composites full books in PDF, epub, and Kindle. Read online Metallic Glasses And Their Composites ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Metallic Glasses and Their Composites by : D.V. Louzguine
Download or read book Metallic Glasses and Their Composites written by D.V. Louzguine and published by Materials Research Forum LLC. This book was released on 2021-01-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic glasses and their crystal/glass composites find ever more applications in such fields as mini transformers, microelectromechanical devices, pressure sensors, precision surgical instruments, biological implants and sportive goods (springs, diaphragms, membranes, knife blades, electromagnetic wave shields, optical mirrors, power inductors, Coriolis flow meters, etc.). The book reviews recent research and suggests future developments, e.g. in the area of dual-phase composite/hybrid materials. Keywords: Metallic Glasses, Crystal/Glass Composites, Dual-phase Composite/Hybrid Materials, Supercooled Liquid, Devitrification, Magnetic Materials, Microelectromechanical Devices, Pressure Sensors, Orthopedic Screws, Precision Instruments, Biological Implants, Electromagnetic Wave Shields, Optical Mirrors, Power Inductors, Coriolis Flow Meters.
Book Synopsis Bulk Metallic Glasses and Their Composites by : Muhammad Musaddique Ali Rafique
Download or read book Bulk Metallic Glasses and Their Composites written by Muhammad Musaddique Ali Rafique and published by Momentum Press. This book was released on 2018-07-31 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive and holistic study of microstrucure evoution during solidification and additive manufacturin.g Bulk metallic glasses and their composites have attracted a lot of attention lately in the scientific community owing to their excellent mechanical properties (combination of hardness, strength, and high elastic strain limit). However, they still lack toughness and tensile ductility and exhibit catastrophic failure upon tension. This can be overcome by various means, of which in situ introduction of ductile crystalline precipitates/phases during solidification proved to be the best. Various studies have been carried out in the last two decades, which explain this phenomenon. However, there is a gap on how this can be achieved in modern additive manufacturing exploiting inherent nature of process. This book aims to bridge this gap. A comprehensive and holistic study is presented, documenting the step-by-step evolution of these materials since their inception till date, explaining the development of toughness in them by modeling and simulation of microstructure evolution during solidification and additive manufacturing.
Book Synopsis Metallic Glasses and Their Composites by : D.V. Louzguine
Download or read book Metallic Glasses and Their Composites written by D.V. Louzguine and published by Materials Research Forum LLC. This book was released on 2018-01-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The formation of metallic glasses and dual-phase composite/hybrid materials is reviewed, as well as the glass transition process and the resulting structural phenomena. These materials exhibit high strength, extreme hardness, good wear resistance and large elastic deformation. Due to their excellent structural, functional, magnetic, chemical and biological properties metallic glasses are suitable for a great many applications, including in such areas as microelectromechanical devices, pressure sensors, orthopaedic screws and precision surgical instruments. Metallic Glasses, Metallic Glass Composites, Crystal/Glass Transition, Nano-Crystallization, Phase Separations, Supercooled Liquids, Glassy Nanocomposites, Nanoscale Quasicrystals, Mechanical Properties, Nanoscale Wear Resistance, Bauschinger Effect, Cryogenic Temperature, Porous Glasses, Nanocomposite Alloys, Soft Magnetic Alloys, Hard Magnetic Alloys, Magnetocaloric Effect, Corrosion Resistant Alloys, Surface Oxides, Catalysts
Author :Muhammad Musaddique Ali Rafique Publisher :Walter de Gruyter GmbH & Co KG ISBN 13 :3110747235 Total Pages :203 pages Book Rating :4.1/5 (17 download)
Book Synopsis Bulk Metallic Glasses and Their Composites by : Muhammad Musaddique Ali Rafique
Download or read book Bulk Metallic Glasses and Their Composites written by Muhammad Musaddique Ali Rafique and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-09-20 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive state-of-the-art review on the topic of bulk metallic glass matrix composites and understanding of mechanisms of development of composite microstructure. It discusses mechanisms of formation and toughening both during conventional casting routes and additive manufacturing. The second edition encompasses new studies and highlights advancement in mechanical properties, characterization, processing and applications.
Book Synopsis Metallic Glasses and Their Composites by : D.V. Louzguine
Download or read book Metallic Glasses and Their Composites written by D.V. Louzguine and published by Materials Research Forum LLC. This book was released on 2021-01-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic glasses and their crystal/glass composites find ever more applications in such fields as mini transformers, microelectromechanical devices, pressure sensors, precision surgical instruments, biological implants and sportive goods (springs, diaphragms, membranes, knife blades, electromagnetic wave shields, optical mirrors, power inductors, Coriolis flow meters, etc.). The book reviews recent research and suggests future developments, e.g. in the area of dual-phase composite/hybrid materials. Keywords: Metallic Glasses, Crystal/Glass Composites, Dual-phase Composite/Hybrid Materials, Supercooled Liquid, Devitrification, Magnetic Materials, Microelectromechanical Devices, Pressure Sensors, Orthopedic Screws, Precision Instruments, Biological Implants, Electromagnetic Wave Shields, Optical Mirrors, Power Inductors, Coriolis Flow Meters.
Book Synopsis Bulk Metallic Glasses by : C. Suryanarayana
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Book Synopsis Metallic Glass-Based Nanocomposites by : Sumit Sharma
Download or read book Metallic Glass-Based Nanocomposites written by Sumit Sharma and published by CRC Press. This book was released on 2019-09-23 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Glass-Based Nanocomposites: Molecular Dynamics Study of Properties provides readers with an overview of the most commonly used tools for MD simulation of metallic glass composites and provides all the basic steps necessary for simulating any material on Materials Studio. After reading this book, readers will be able to model their own problems on this tool for predicting the properties of metallic glass composites. This book provides an introduction to metallic glasses with definitions and classifications, provides detailed explanations of various types of composites, reinforcements and matrices, and explores the basic mechanisms of reinforcement-MG interaction during mechanical loading. It explains various models for calculating the thermal conductivity of metallic glass composites and provides examples of molecular dynamics simulations. Aimed at students and researchers, this book caters to the needs of those working in the field of molecular dynamics (MD) simulation of metallic glass composites.
Book Synopsis Bulk Metallic Glasses and Their Composites by : Hesham Ezzat Khalifa
Download or read book Bulk Metallic Glasses and Their Composites written by Hesham Ezzat Khalifa and published by . This book was released on 2009 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: A design protocol utilizing common elements for bulk metallic glass formation has been employed to develop novel, low cost Fe-, and Ti- based bulk metallic glasses. A critical obstacle that was successfully overcome in this work is the omission of beryllium in these alloys. Beryllium is of vital importance in many bulk metallic glass forming systems, but it is expensive and poses considerable health risks. Bulk metallic glasses in these novel Fe-, and Ti-based systems exhibit extremely high mechanical strength and excellent thermal stability. Devitrification and cooling rate experiments were used to identify crystalline phase formation and assess activation energy for crystallization, as well as to explore and develop ductile BMG composites. To better control microstructure in these BMG composites, a novel processing technique, called semi-solid forging was developed, wherein the alloy melt is heated to above the melt temperature of the glass, but below the melt temperature of the ductile crystalline phase. Such an approach permits the maintenance of a glassy, or nanocrystalline matrix phase, while simultaneously coarsening and homogenizing the ductile, secondary phase. This processing approach leads to enhanced ductility in the alloys, which, to this point, has not been observed using conventional casting methods. The combination of novel, low-cost, alloy compositions with semi-solid forging has been successfully utilized to develop new high strength structural materials with enhanced ductility and toughness. Microstrutural and mechanical properties of these novel, toughened, BMG composites are presented. A comprehensive analysis of the relationship between deformation mechanisms and microstructure reveals that enhanced ductility is predicated on matching fundamental mechanical and microstructural length scales in a Ti-Ni-Si-Mo BMG composite. Under optimized microstructural conditions, a maximum compressive strength exceeding 2400 MPa with ~ 30% total strain to failure was achieved. Furthermore, a 400% increase in fracture toughness over the monolithic glass, and tensile ductility of 3.5% were observed. The design of conventional, crystalline, high-performance structural materials is governed by optimizing combinations of mechanical properties such as strength, ductility, toughness, and elasticity. In general though, high strength comes at the expense of ductility. The development of ductile BMG composites represents the dawn of a new era in structural materials that couples ultra high strength with considerable ductility and enhanced fracture toughness.
Author :Muhammad Musaddique Ali Rafique Publisher :Walter de Gruyter GmbH & Co KG ISBN 13 :3110747413 Total Pages :257 pages Book Rating :4.1/5 (17 download)
Book Synopsis Bulk Metallic Glasses and Their Composites by : Muhammad Musaddique Ali Rafique
Download or read book Bulk Metallic Glasses and Their Composites written by Muhammad Musaddique Ali Rafique and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-09-20 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a comprehensive state-of-the-art review on the topic of bulk metallic glass matrix composites and understanding of mechanisms of development of composite microstructure. It discusses mechanisms of formation and toughening both during conventional casting routes and additive manufacturing. The second edition encompasses new studies and highlights advancement in mechanical properties, characterization, processing and applications.
Download or read book Metallic Glasses written by Hu Huang and published by BoD – Books on Demand. This book was released on 2018-09-19 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic glasses are very promising engineering and functional materials due to their unique mechanical, chemical, and physical properties, attracting increasing attention from both scientific and industrial communities. However, their practical applications are greatly hindered due to three main problems: dimensional limit, poor tension plasticity, and difficulty in machining and shaping. Therefore, further investigation of these issues is urgently required. This book provides readers with recent achievements and developments in the properties and processing of metallic glasses, including mainly thermoplastic forming of metallic glasses (Chapter 2), atomic-level simulation of mechanical deformation of metallic glasses (Chapter 3), metallic glass matrix composites (Chapter 4), and tribo-electrochemical applications of metallic glasses (Chapters 5 and 6).
Book Synopsis Bulk Metallic Glasses by : Michael Miller
Download or read book Bulk Metallic Glasses written by Michael Miller and published by Springer Science & Business Media. This book was released on 2007-09-26 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bulk metallic glasses are a new emerging field of materials with many desirable and unique properties. These amorphous materials have many diverse applications from structural applications to biomedical implants. This book provides a complete overview of bulk metallic glasses. It covers the principles of alloy design, glass formation, processing, atomistic modeling, computer simulations, mechanical properties and microstructures.
Book Synopsis The World of Bulk Metallic Glasses and Their Composites by : Cang Fan
Download or read book The World of Bulk Metallic Glasses and Their Composites written by Cang Fan and published by . This book was released on 2007-01-01 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Metallic Glasses by : Keith K.C. Chan
Download or read book Metallic Glasses written by Keith K.C. Chan and published by MDPI. This book was released on 2018-07-02 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Metallic Glasses" that was published in Metals
Download or read book Metallic Glasses written by Dragica Minić and published by BoD – Books on Demand. This book was released on 2020-02-05 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term "metallic glasses" is widely used to denote the amorphous alloys obtained by rapid quenching techniques. These materials are characterized by short range atom ordering without translational periodicity of the structure. Kinetic and thermodynamic metastability is one of the main characteristics generally related to metallic glasses, while their thermally induced microstructural transformations could result in deterioration or improvement of the functional properties. Due to their favorable magnetic, electrical, mechanical, and anti-corrosion properties, metallic glasses as new and attractive materials have found application in many areas of modern industries - electronics, construction industry, aerospace industry; as well as chemistry, biomedicine, and surgery.
Book Synopsis Bulk Metallic Glasses by : C. Suryanarayana
Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.
Book Synopsis Flow and Fracture of Bulk Metallic Glass Alloys and Their Composites by :
Download or read book Flow and Fracture of Bulk Metallic Glass Alloys and Their Composites written by and published by . This book was released on 2001 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fracture and plastic deformation mechanisms of a Zr-Ti-Ni-Cu-Be bulk metallic glass and a composite utilizing a crystalline reinforcement phase are reviewed. The relationship between stress state, free volume and shear band formation are discussed. Positron annihilation techniques were used to confirm the predicted increase in free volume after plastic straining. Strain localization and failure were examined for a wide range of stress states. Finally, methods for toughening metallic glasses are considered. Significant increases in toughness are demonstrated for a composite bulk metallic glass containing a ductile second phase which stabilizes shear band formation and distributes plastic deformation.
Book Synopsis Electrochemical and Corrosion Behavior of Metallic Glasses by : Vahid Hasannaeimi
Download or read book Electrochemical and Corrosion Behavior of Metallic Glasses written by Vahid Hasannaeimi and published by MDPI. This book was released on 2021-02-10 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic glasses are multi-component metallic alloys with disordered atomic distribution unlike their crystalline counterparts with long range periodicity in arrangement of atoms. Metallic glasses of different compositions are being commercially used in bulk form and as coatings because of their excellent corrosion resistance. This book was written with the objective of providing a comprehensive understanding of the electrochemical and corrosion behavior of metallic glasses for a wide range of compositions. Corrosion in structural materials leads to rapid deterioration in the performance of critical components and serious economic implications including property damage and loss in human life. Discovery and development of metallic alloys with enhanced corrosion resistance will have a sizable impact in a number of areas including manufacturing, aerospace, oil and gas, nuclear industry, and load-bearing bioimplants. The corrosion resistance of many metallic glass systems is superior compared to conventionally used alloys in different environments. In this book, we discuss in detail the role of chemistry, processing conditions, environment, and surface state on the corrosion behavior of metallic glasses and compare their performance with conventional alloys. Several of these alloy systems consist of all biocompatible and non-allergenic elements making them attractive for bioimplants, stents, and surgical tools. To that end, critical insights are provided on the bio-corrosion response of some metallic glasses in simulated physiological environment.
