Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Material Forming Esaform 2012 Selected Peer Reviewed Papers From The 15th Conference Of The European Scientific Association On Material Forming Esaform 2012 March 14 16 2012 Erlangen Germany 2
Download Material Forming Esaform 2012 Selected Peer Reviewed Papers From The 15th Conference Of The European Scientific Association On Material Forming Esaform 2012 March 14 16 2012 Erlangen Germany 2 full books in PDF, epub, and Kindle. Read online Material Forming Esaform 2012 Selected Peer Reviewed Papers From The 15th Conference Of The European Scientific Association On Material Forming Esaform 2012 March 14 16 2012 Erlangen Germany 2 ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Material Forming ESAFORM 2012 by : Marion Merklein
Download or read book Material Forming ESAFORM 2012 written by Marion Merklein and published by Trans Tech Publications Ltd. This book was released on 2012-02-03 with total page 1426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 15th Conference of the European Scientific Association on Material Forming, (ESAFORM 2012), March 14-16, 2012, Erlangen, Germany
Book Synopsis Micro/Nano Manufacturing by : André Zimmermann
Download or read book Micro/Nano Manufacturing written by André Zimmermann and published by MDPI. This book was released on 2019-09-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro manufacturing involves dealing with the fabrication of structures in the size range of 0.1 to 1000 µm. The scope of nano manufacturing extends the size range of manufactured features to even smaller length scales—below 100 nm. A strict borderline between micro and nano manufacturing can hardly be drawn, such that both domains are treated as complementary and mutually beneficial within a closely interconnected scientific community. Both micro and nano manufacturing can be considered as important enablers for high-end products. This Special Issue of Applied Sciences is dedicated to recent advances in research and development within the field of micro and nano manufacturing. The included papers report recent findings and advances in manufacturing technologies for producing products with micro and nano scale features and structures as well as applications underpinned by the advances in these technologies.
Book Synopsis Integrative Production Technology by : Christian Brecher
Download or read book Integrative Production Technology written by Christian Brecher and published by Springer. This book was released on 2017-01-09 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students.
Book Synopsis Cold Micro Metal Forming by : Frank Vollertsen
Download or read book Cold Micro Metal Forming written by Frank Vollertsen and published by Springer Nature. This book was released on 2019-09-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.
Book Synopsis Material Forming ESAFORM 2015 by : Aldo Ofenheimer
Download or read book Material Forming ESAFORM 2015 written by Aldo Ofenheimer and published by Trans Tech Publications Ltd. This book was released on 2015-07-10 with total page 1660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), April 15-17, 2015, Graz, Austria
Book Synopsis Material Forming ESAFORM 2014 by : Jari Larkiola
Download or read book Material Forming ESAFORM 2014 written by Jari Larkiola and published by Trans Tech Publications Ltd. This book was released on 2014-05-23 with total page 1814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 17th Conference of the European Scientific Association on Material Forming (ESAFORM 2014), May 7-9, 2014, Espoo, Finland
Book Synopsis Sheet Metal Forming by : Taylan Altan
Download or read book Sheet Metal Forming written by Taylan Altan and published by ASM International. This book was released on 2012 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descripción del editor: "heet forming fundamentals are thoroughly addressed in this comprehensive reference for the practical and efficient use of sheet forming technologies. The principle variables of sheet forming-including the interactions between variables-are clearly explained, as a basic foundation for the most effective use of computer aided modeling in process and die design.Topics include stress analysis, formability criteria, tooling, and materials for sheet forming. The book also covers the latest developments in sheet metal forming technology, including servo-drive presses and their applications, and advanced cushion systems in mechanical and hydraulic presses." (ASM International).
Book Synopsis 60 Excellent Inventions in Metal Forming by : A. Erman Tekkaya
Download or read book 60 Excellent Inventions in Metal Forming written by A. Erman Tekkaya and published by Springer. This book was released on 2015-05-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: 60 novel approaches in metal forming are presented and explained in detail. Contributions from acknowledged international scientists representing the state-of-art in metal forming open a general view on recent results and a clear view on demands for new research initiatives.
Book Synopsis Micro Metal Forming by : Frank Vollertsen
Download or read book Micro Metal Forming written by Frank Vollertsen and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given: tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro metal forming. The description comprises information from actual research and the young history of this technology branch to be used by students, scientists and engineers in industry who already have a background in metal forming and like to expand their knowledge towards miniaturization. tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro metal forming. The description comprises information from actual research and the young history of this technology branch to be used by students, scientists and engineers in industry who already have a background in metal forming and like to expand their knowledge towards miniaturization.
Book Synopsis Formability of Metallic Materials by : D. Banabic
Download or read book Formability of Metallic Materials written by D. Banabic and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction into crystal plasticity,the fun- damentals of crystallographic textures and plastic anisotro- py, a main topic of this book, are outlined. A large chapter is devoted to formability testing both for bulk metal and sheet metal forming. For the first time testing methods for plastic anisotropy of round bars and tubes are included. A profound survey is given of literature about yield criteria for anisotropic materials up to most recent developments and the calculation of forming limits of anisotropic sheet me- tal. Other chapters are concerned with properties of workpieces after metal forming as well as the fundamentals of the theory of plasticity and finite element simulation of metal forming processes. The book is completed by a collection of tables of international standards for formability testing and of flow curves of metals which are most commonly used in metal forming. It is addressed both to university and industrial readers.
Book Synopsis Manufacturing Processes 4 by : Fritz Klocke
Download or read book Manufacturing Processes 4 written by Fritz Klocke and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential information on metal forming, utilizing a practical distinction between bulk and sheet metal forming. In the field of bulk forming, it examines processes of cold, warm and hot bulk forming, as well as rolling and a new addition, the process of thixoforming. As for the field of sheet metal working, on the one hand it deals with sheet metal forming processes (deep drawing, flange forming, stretch drawing, metal spinning and bending). In terms of special processes, the chapters on internal high-pressure forming and high rate forming have been revised and refined. On the other, the book elucidates and presents the state of the art in sheet metal separation processes (shearing and fineblanking). Furthermore, joining by forming has been added to the new edition as a new chapter describing mechanical methods for joining sheet metals. The new chapter “Basic Principles” addresses both sheet metal and bulk forming, in addition to metal physics, plastomechanics and computational basics; these points are complemented by the newly added topics of metallography and analysis, materials and processes for testing, and tribology and lubrication techniques. The chapters are supplemented by an in-depth description of modern numeric methods such as the finite element method. All chapters have been updated and revised for the new edition, and many practical examples from modern manufacturing processes have been added.
Book Synopsis Additive Manufacturing of Titanium Alloys by : Bhaskar Dutta
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Book Synopsis Production at the Leading Edge of Technology by : Bernd-Arno Behrens
Download or read book Production at the Leading Edge of Technology written by Bernd-Arno Behrens and published by Springer Nature. This book was released on 2021-09-04 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: This congress proceedings provides recent research on leading-edge manufacturing processes. The aim of this scientific congress is to work out diverse individual solutions of "production at the leading edge of technology" and transferable methodological approaches. In addition, guest speakers with different backgrounds will give the congress participants food for thoughts, interpretations, views and suggestions. The manufacturing industry is currently undergoing a profound structural change, which on the one hand produces innovative solutions through the use of high-performance communication and information technology, and on the other hand is driven by new requirements for goods, especially in the mobility and energy sector. With the social discourse on how we should live and act primarily according to guidelines of sustainability, structural change is gaining increasing dynamic. It is essential to translate politically specified sustainability goals into socially accepted and marketable technical solutions. Production research is meeting this challenge and will make important contributions and provide innovative solutions from different perspectives.
Book Synopsis An Introduction to Synchrotron Radiation by : Philip Willmott, PhD
Download or read book An Introduction to Synchrotron Radiation written by Philip Willmott, PhD and published by John Wiley & Sons. This book was released on 2011-06-15 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to the basic concepts of the generation and manipulation of synchrotron light, its interaction with matter, and the application of synchrotron light in the “classical” techniques, while including some of the most modern technological developments. As much as possible, complicated mathematical derivations and formulas are avoided. A more heuristic approach is adopted, whereby the general physical reasoning behind the equations is highlighted. Key features: A general introduction to synchrotron radiation and experimental techniques using synchrotron radiation Contains many detailed “worked examples” from the literature Of interest for a broad audience - synchrotrons are possibly one of the best examples of multidisciplinary research Four-colour presentation throughout
Book Synopsis Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) by : Paul Mason
Download or read book Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) written by Paul Mason and published by Springer. This book was released on 2017-04-27 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of papers presented at the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017), a specialty conference organized by The Minerals, Metals & Materials Society (TMS). The contributions offer topics relevant to the global advancement of ICME as an engineering discipline. Topics covered include the following:ICME Success Stories and ApplicationsVerification, Validation, Uncertainty Quantification Issues and Gap AnalysisIntegration Framework and UsageAdditive ManufacturingPhase Field ModelingMicrostructure EvolutionICME Design Tools and ApplicationMechanical Performance Using Multi-Scale Modeling
Book Synopsis Composite Sheet Forming by : D. Bhattacharyya
Download or read book Composite Sheet Forming written by D. Bhattacharyya and published by Elsevier. This book was released on 1997-06-18 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet forming is the most common process used in metal forming and is therefore constantly being adapted or modified to suit the needs of forming composite sheets. Due to the increasing availability of various types of fibre reinforced polymeric sheets, especially with thermoplastic matrices, the scope of use of such materials is rapidly expanding in the automobile, building, sports and other manufacturing industries beyond the traditional areas of aerospace and aircraft applications. This book contains twelve chapters and attempts to cover different aspects of sheet forming including both thermoplastic and thermosetting materials. In view of the expanded role of fibre reinforced composite sheets in the industry, the book also describes some non-traditional applications, processes and analytical techniques involving such materials.The first chapter is a brief introduction to the principles of sheet metal forming. The next two chapters introduce the various forms of materials, manufacturing techniques and the fundamentals of computer simulation. Chapter 4 describes the different aspects of thermoforming of continuous fibre reinforced thermoplastics and the following chapter studies the shear and frictional behaviour of composite sheets during forming. Chapter 6 explores the possibility of applying the grid strain analysis method in continuous fibre reinforced polymeric sheets. The next two chapters address fundamental concepts and recent developments in finite element modelling and rheology. Chapter 9 introduces the theory of bending of thermoplastic composite sheets and shows a novel way of determining both longitudinal and transverse viscosities through vee-bend tests. A significant expansion in the usage of composite materials is taking place in biomedical areas. Chapter 10 discusses the thermoforming of knitted fabric reinforced thermoplastics for load bearing and anisotropic bio-implants. The final chapter introduces roll forming, a commonly used rapid manufacturing process for sheet metals, and discusses the possibility of applying it economically for continuous reinforced thermoplastic sheets.
Book Synopsis Future Trends in Production Engineering by : Günther Schuh
Download or read book Future Trends in Production Engineering written by Günther Schuh and published by Springer Science & Business Media. This book was released on 2012-08-15 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: To meet and adapt to the current and future trends and issues in technology and society, the science committee of The German Academic Society for Production Engineering (WGP) continues to define future topics for production technology. These themes represent not only the key focus for the scientific work of the WGP, but also the central themes of the first annual conference in June 2011, whose paper is publically available in this volume. Such themes, including electric mobility, medical technology, lightweight construction, and resource efficiency, as well as mass production ability have all been identified as future, large-scale, and long-term drivers of change. Future trends influence changes sustainably and fundamentally; they permeate society, technology, economics, and value systems and have an effect in virtually all areas of life. The WGP has, as part of its research, established for itself the goal of not only observing these emerging changes, but also of supervising and influencing their development in order to ensure steady progress, secure sustainability, and shape the future.
