Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Low Temperature Characterization Of Foamed Warm Mix Asphalt
Download Low Temperature Characterization Of Foamed Warm Mix Asphalt full books in PDF, epub, and Kindle. Read online Low Temperature Characterization Of Foamed Warm Mix Asphalt ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Low Temperature Characterization of Foamed Warm Mix Asphalt by : Ahmad Alhasan
Download or read book Low Temperature Characterization of Foamed Warm Mix Asphalt written by Ahmad Alhasan and published by . This book was released on 2013 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, a group of technologies has been introduced in the United States that allows producing asphalt mixtures at temperatures 30 to 100oF lower than what is used in traditional hot mix asphalt (HMA). This group of technologies is commonly referred to as Warm Mix Asphalt (WMA). From among these technologies, foamed WMA produced by water injection has gained increased attention from the asphalt paving industry in Ohio since it does not require the use of costly additives. This study evaluated the low-temperature performance of foamed WMA and compared it to traditional HMA. Two asphalt binders (PG 70-22 and PG 64-28), two aggregate types (limestone and crushed gravel), and two aggregate gradations (12.5 mm NMAS and 19.0 mm NMAS) were used in this study. The low-temperature behavior of the asphalt mixtures was evaluated using the thermal stress restrained specimen test (TSRST). In addition, the low-temperature properties of the asphalt binders were measured using the bending beam rheometer (BBR). This allowed for comparing the fracture temperature obtained from the TSRST to the low-temperature performance grade obtained using the BBR test.In general, the foamed WMA mixtures exhibited warmer fracture temperatures and lower fracture stresses in the TSRST than the traditional HMA mixtures. This indicates that the HMA mixtures have better resistance to low-temperature cracking. It was found that the binder grade had the most significant effect on the fracture temperature followed by the mix type, while the aggregate type had the most significant effect on the fracture stress followed by the binder grade and the mix type. The fracture temperatures measured in the TSRST were also found to be consistent with the low-temperature performance grades obtained using the BBR test.
Book Synopsis Aging Characterization of Foamed Warm Mix Asphalt by : Mir Shahnewaz Arefin
Download or read book Aging Characterization of Foamed Warm Mix Asphalt written by Mir Shahnewaz Arefin and published by . This book was released on 2015 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study evaluated the aging characteristic of foamed warm mix asphalt (WMA) produced by water injection in comparison to traditional hot mix asphalt (HMA). Four types of asphalt binders (PG 64-22, PG 64-28, PG 70-22, PG 76-22) were used in the preparation of the foamed WMA and HMA mixtures. All mixtures were prepared using limestone aggregates with a nominal maximum aggregate size (NMAS) of 12.5 mm that met the Ohio Department of Transportation (ODOT) Construction and Material Specifications (C&MS) for Item 442 (Superpave Asphalt Concrete).The short-term and long-term aging of the asphalt binders were simulated using the rolling thin film oven (RTFO) and the pressure aging vessel (PAV), respectively, while the short-term and long-term aging of the laboratory-prepared asphalt mixtures were simulated according to AASHTO R 30 (Mixture Conditioning of Hot Mix Asphalt).The dynamic shear rheometer (DSR) was used to characterize the viscoelastic behavior of the unaged, RTFO-aged, and PAV-aged asphalt binders, while the dynamic modulus (lE*l) test was used to characterize the viscoelastic behavior of the short-term and long-term aged foamed WMA and HMA mixtures.In addition, the mechanistic-empirical pavement design guide (MEPDG) global aging model was used to predict the effect of aging on the dynamic modulus (lE*l) of foamed WMA and HMA mixtures, and the MEPDG global aging model predictions were compared to dynamic modulus (lE*l) test results obtained in the laboratory for both asphalt mixtures. By comparing the DSR test results following RTFO and PAV to those obtained for the unaged asphalt binders, it was observed that PG 64-22 was the least susceptible to aging followed by PG 70-22, PG 76-22, and PG 64-28. Similar trends were also observed from the dynamic modulus test, where little difference was noticed between the short-term and long-term aged specimens prepared using PG 64-22 for both foamed WMA and HMA mixtures.The dynamic modulus test results also revealed slightly lower lE*l values for foamed WMA mixtures in comparison to traditional HMA mixtures. This indicates that foamed WMA mixtures are slightly more susceptible to rutting than HMA mixtures. However, by comparing the dynamic modulus of the long-term aged specimens to the short-term aged specimens, it was observed that the increase in stiffness for the foamed WMA mixtures was less than that for the traditional HMA mixtures. This indicates that foamed WMA mixtures are less susceptible to aging and subsequently fatigue cracking than HMA mixtures.Finally, by the comparing the MEPDG global aging model predictions to the dynamic modulus test results for both foamed WMA and HMA mixtures, it was observed that the MEPDG global aging model provided more reasonable predictions, especially at higher frequencies, but overestimated or underestimated the dynamic modulus at lower frequencies. This was observed for both foamed WMA and HMA mixtures, which suggests that this model can be used for both types of mixtures.
Book Synopsis Advances in Materials and Pavement Prediction by : Eyad Masad
Download or read book Advances in Materials and Pavement Prediction written by Eyad Masad and published by CRC Press. This book was released on 2018-07-16 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Materials and Pavement Performance Prediction contains the papers presented at the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P, Doha, Qatar, 16- 18 April 2018). There has been an increasing emphasis internationally in the design and construction of sustainable pavement systems. Advances in Materials and Pavement Prediction reflects this development highlighting various approaches to predict pavement performance. The contributions discuss links and interactions between material characterization methods, empirical predictions, mechanistic modeling, and statistically-sound calibration and validation methods. There is also emphasis on comparisons between modeling results and observed performance. The topics of the book include (but are not limited to): • Experimental laboratory material characterization • Field measurements and in situ material characterization • Constitutive modeling and simulation • Innovative pavement materials and interface systems • Non-destructive measurement techniques • Surface characterization, tire-surface interaction, pavement noise • Pavement rehabilitation • Case studies Advances in Materials and Pavement Performance Prediction will be of interest to academics and engineers involved in pavement engineering.
Book Synopsis Multiscale Characterization of Advanced Pavement Materials by : Dawei Wang
Download or read book Multiscale Characterization of Advanced Pavement Materials written by Dawei Wang and published by Frontiers Media SA. This book was released on 2023-10-20 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Mix Design Practices for Warm Mix Asphalt by : Ramon Francis Bonaquist
Download or read book Mix Design Practices for Warm Mix Asphalt written by Ramon Francis Bonaquist and published by Transportation Research Board. This book was released on 2011 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 691: Mix Design Practices for Warm-Mix Asphalt explores a mix design method tailored to the unique material properties of warm mix asphalt technologies. Warm mix asphalt (WMA) refers to asphalt concrete mixtures that are produced at temperatures approximately 50°F (28°C) or more cooler than typically used in the production of hot mix asphalt (HMA). The goal of WMA is to produce mixtures with similar strength, durability, and performance characteristics as HMA using substantially reduced production temperatures. There are important environmental and health benefits associated with reduced production temperatures including lower greenhouse gas emissions, lower fuel consumption, and reduced exposure of workers to asphalt fumes. Lower production temperatures can also potentially improve pavement performance by reducing binder aging, providing added time for mixture compaction, and allowing improved compaction during cold weather paving. Appendices to NCHRP Report 691 include the following. Appendices A, B, and D are included in the printed and PDF version of the report. Appendices C and E are available only online.
Book Synopsis Laboratory Characterization of Asphalt Binders Containing a Chemical-Based Warm Mix Asphalt Additive by : Shivani Rani
Download or read book Laboratory Characterization of Asphalt Binders Containing a Chemical-Based Warm Mix Asphalt Additive written by Shivani Rani and published by . This book was released on 2020 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Different technologies, namely foamed asphalt, synthetic waxes, zeolites, and chemical additives, are used to produce warm mix asphalt (WMA). This study was undertaken to evaluate the effect of using different amounts of an amine-based chemical WMA additive on the rheology, performance grade (PG), and moisture-induced damage potential of an asphalt binder (PG 58-28). Superpave specifications were used to evaluate the rheological properties and PG of the asphalt binder. Also, a mechanistic approach-based on the surface free energy (SFE) method was used to evaluate the moisture-induced damage potential of the asphalt binder combined with commonly used aggregates in an asphalt mix. It was found that the dynamic viscosity of the asphalt binder was not significantly affected after blending it with the WMA additive. It was also observed that the Superpave high-temperature PG and the rutting factor did not reduce by an increase in the WMA additive content. However, the continuous low-temperature PG of the asphalt binder decreased with an increase in the amount of WMA additive. Furthermore, it was found that the fatigue resistance increased after blending the binder with the WMA additive. The SFE results of the asphalt binder revealed that the WMA additive used in this study reduced the moisture-induced damage potential of the asphalt mixes. However, the extent of this improvement was found to largely depend on the aggregate type. The outcomes of this study are expected to help better understand the influence of amine-based chemical WMA additives on rheological and long-term performance of asphalt mix.
Book Synopsis Special Mixture Design Considerations and Methods for Warm Mix Asphalt by :
Download or read book Special Mixture Design Considerations and Methods for Warm Mix Asphalt written by and published by Transportation Research Board. This book was released on 2012 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Report 714: Special Mixture Design Considerations and Methods for Warm-Mix Asphalt: A Supplement to NCHRP Report 673: A Manual for Design of Hot-Mix Asphalt with Commentary presents special mixture design considerations and methods used with warm-mix asphalt. NCHRP Report 714 is a supplement to NCHRP Report 673: A Manual for Design of Hot-Mix Asphalt. All references to chapters in NCHRP Report 714 refer to the corresponding chapters in NCHRP Report 673.
Book Synopsis Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) by : Ibrahim Karaman
Download or read book Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) written by Ibrahim Karaman and published by Springer. This book was released on 2016-12-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at The TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), a conference organized by The Minerals, Metals & Materials Society (TMS) and held in Doha, Qatar. The event focused on new materials research and development in applications of interest for Qatar and the entire Middle East and Mediterranean region. The papers in this collection are divided into five sections: (1) Sustainable Infrastructure Materials; (2) Computational Materials Design; (3) Materials for Energy Conversion and Storage; (4) Lightweight and High Performance Materials; and (5) Materials for Energy Extraction and Storage: Shape Memory Alloys.
Book Synopsis Long and Deep Tunnels by : Vittorio Guglielmetti
Download or read book Long and Deep Tunnels written by Vittorio Guglielmetti and published by CRC Press. This book was released on 2016-04-15 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and construction of “long and deep” tunnels, i.e. tunnels under mountains, characterised by either considerable length and/or overburden, represent a considerable challenge. The scope of this book is not to instruct how to design and construct such tunnels but to share a method to identify the potential hazards related to the process of designing and constructing long and deep tunnels, to produce a relevant comprehensive analysis and listing, to quantify the probability and consequences, and to design proper mitigation measures and countermeasures. The design, developed using probabilistic methods, is verified during execution by means of the so called Plan for Advance of the Tunnel (PAT) method, which allows adapting the design and control parameters of the future stretches of the tunnel to the results of the stretches already finished, using the monitoring data base. Numerous criteria are given to identify the key parameters, necessary for the PAT procedure. Best practices of excavation management with the help of real time monitoring and control are also provided. Furthermore cost and time evaluation systems are analysed. Finally, contractual aspects related to construction by contract are investigated, for best development and application of models more appropriate for tunnelling-construction contracts. The work will be of interest to practising engineers, designers, consultants and students in mining, underground, tunnelling, transportation and construction engineering, as well as to foundation and geological engineers, urban planners/developers and architects.
Book Synopsis Warm Mix Asphalt by : Paula Cristina Arroyo-Martínez
Download or read book Warm Mix Asphalt written by Paula Cristina Arroyo-Martínez and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Warm mix asphalt (WMA) is a technology that emerges to achieve environmental challenges of reducing greenhouse gas emissions. There are several technologies that allow diminishing the mixing and compaction temperature of the asphalt mixtures while improving workability. The benefits of using warm mix asphalt are not just environmental but also include better working conditions and the capability of introducing greater percentages of recycled materials into the mixture. Foamed asphalt is the most used technology to obtained warm mix asphalt in the United States of America (USA), and the performance of the resultant mixtures could be increased by controlling and improving the characteristics of the foam.
Book Synopsis Advancements on Sustainable Civil Infrastructures by : Don Chen
Download or read book Advancements on Sustainable Civil Infrastructures written by Don Chen and published by Springer. This book was released on 2018-07-16 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the field of geomaterial and waste management. With high urbanization rates, advancement in technologies, and changes in consumer behavior, wastes generated through the daily activities of individuals and organizations pose many challenges in terms of their management. The studies presented in this book highlight attempts on the part of researchers and practitioners to address contemporary issues in geoenvironmental engineering such as the characterization of dredged sediments, geomaterials and waste, valorization of waste, sustainability in waste management, and various other geoenvironmental issues that are becoming increasingly relevant in today’s world. The studies were selected from papers presented at the 5th GeoChina International Conference, Civil Infrastructures Confronting Severe Weathers and Climate Changes: From Failure to Sustainability, held in Hangzhou, China on July 23–25, 2018.
Book Synopsis 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials by : Francesco Canestrari
Download or read book 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials written by Francesco Canestrari and published by Springer. This book was released on 2015-09-24 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).
Book Synopsis Warm-mix Asphalt Study by : David John Jones
Download or read book Warm-mix Asphalt Study written by David John Jones and published by . This book was released on 2013 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Superpave Mix Design by : Asphalt Institute
Download or read book Superpave Mix Design written by Asphalt Institute and published by . This book was released on 2001-01-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis An Acoustic Emission-based Test to Evaluate Low Temperature Behavior of Asphalt Materials by :
Download or read book An Acoustic Emission-based Test to Evaluate Low Temperature Behavior of Asphalt Materials written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems by : Manfred N. Partl
Download or read book Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems written by Manfred N. Partl and published by Springer. This book was released on 2018-02-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the detailed results of five task groups of the RILEM technical committee TC 237-SIB on Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems. It concentrates on specific new topics in asphalt binder and mixture testing, dealing with new developments in asphalt testing, in particular also in view of new innovative bituminous materials, such as hot and cold recycled mixtures, grid reinforced pavements and recycled Reclaimed Asphalt Pavements (RAP), where test methods developed for traditional asphalt concrete are not a priori applicable. The main objective is providing a basis for pre-standardization by comparing different test methods and showing ways for fundamental improvements. Thus, the book also points the way for a further advanced chemo-physical understanding of materials and their role in pavement systems relying on fundamental material properties and suitable models for describing and predicting the intrinsic mechanisms that determine the material behavior.
Book Synopsis Introduction to Unmanned Aircraft Systems, Second Edition by : Douglas M. Marshall
Download or read book Introduction to Unmanned Aircraft Systems, Second Edition written by Douglas M. Marshall and published by CRC Press. This book was released on 2015-10-26 with total page 1944 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proliferation of technological capability, miniaturization, and demand for aerial intelligence is pushing unmanned aerial systems (UAS) into the realm of a multi-billion dollar industry. This book surveys the UAS landscape from history to future applications. It discusses commercial applications, integration into the national airspace system (NAS), System function, operational procedures, safety concerns, and a host of other relevant topics. The book is dynamic and well-illustrated with separate sections for terminology and web- based resources for further information.
