Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
High Resolution Computational Algorithms For Simulating Offshore Wind Turbines And Farms
Download High Resolution Computational Algorithms For Simulating Offshore Wind Turbines And Farms full books in PDF, epub, and Kindle. Read online High Resolution Computational Algorithms For Simulating Offshore Wind Turbines And Farms ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis High-resolution Computational Algorithms for Simulating Offshore Wind Turbines and Farms by :
Download or read book High-resolution Computational Algorithms for Simulating Offshore Wind Turbines and Farms written by and published by . This book was released on 2015 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present project involves the development of modeling and analysis design tools for assessing offshore wind turbine technologies. The computational tools developed herein are able to resolve the effects of the coupled interaction of atmospheric turbulence and ocean waves on aerodynamic performance and structural stability and reliability of offshore wind turbines and farms. Laboratory scale experiments have been carried out to derive data sets for validating the computational models.
Book Synopsis Reliability-Based Optimization of Floating Wind Turbine Support Structures by : Mareike Leimeister
Download or read book Reliability-Based Optimization of Floating Wind Turbine Support Structures written by Mareike Leimeister and published by Springer Nature. This book was released on 2023-01-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pursues the ambitious goal of combining floating wind turbine design optimization and reliability assessment, which has in fact not been done before. The topic is organized into a series of very ambitious objectives, which start with an initial state-of-the-art review, followed by the development of high-fidelity frameworks for a disruptive way to design next generation floating offshore wind turbine (FOWT) support structures. The development of a verified aero-hydro-servo-elastic coupled numerical model of dynamics for FOWTs and a holistic framework for automated simulation and optimization of FOWT systems, which is later used for the coupling of design optimization with reliability assessment of FOWT systems in a computationally and time-efficient manner, has been an aim of many groups internationally towards implementing a performance-based/goal-setting approach in the design of complex engineering systems. The outcomes of this work quantify the benefits of an optimal design with a lower mass while fulfilling design constraints. Illustrating that comprehensive design methods can be combined with reliability analysis and optimization algorithms towards an integrated reliability-based design optimization (RBDO) can benefit not only the offshore wind energy industry but also other applications such as, among others, civil infrastructure, aerospace, and automotive engineering.
Book Synopsis Simulation of Offshore Wind Turbines by Computational Multi-physics by : Tarin Srisupattarawanit
Download or read book Simulation of Offshore Wind Turbines by Computational Multi-physics written by Tarin Srisupattarawanit and published by . This book was released on 2007 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CgWind written by and published by . This book was released on 2010 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: CgWind is a high-fidelity large eddy simulation (LES) tool designed to meet the modeling needs of wind turbine and wind park engineers. This tool combines several advanced computational technologies in order to model accurately the complex and dynamic nature of wind energy applications. The composite grid approach provides high-quality structured grids for the efficient implementation of high-order accurate discretizations of the incompressible Navier-Stokes equations. Composite grids also provide a natural mechanism for modeling bodies in relative motion and complex geometry. Advanced algorithms such as matrix-free multigrid, compact discretizations and approximate factorization will allow CgWind to perform highly resolved calculations efficiently on a wide class of computing resources. Also in development are nonlinear LES subgrid-scale models required to simulate the many interacting scales present in large wind turbine applications. This paper outlines our approach, the current status of CgWind and future development plans.
Book Synopsis CFD for Wind and Tidal Offshore Turbines by : Esteban Ferrer
Download or read book CFD for Wind and Tidal Offshore Turbines written by Esteban Ferrer and published by Springer. This book was released on 2015-06-09 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book encompasses novel CFD techniques to compute offshore wind and tidal applications. Computational fluid dynamics (CFD) techniques are regarded as the main design tool to explore the new engineering challenges presented by offshore wind and tidal turbines for energy generation. The difficulty and costs of undertaking experimental tests in offshore environments have increased the interest in the field of CFD which is used to design appropriate turbines and blades, understand fluid flow physical phenomena associated with offshore environments, predict power production or characterise offshore environments, amongst other topics.
Book Synopsis An Integrated Nonlinear Wind-Waves Model for Offshore Wind Turbines by : Enzo Marino
Download or read book An Integrated Nonlinear Wind-Waves Model for Offshore Wind Turbines written by Enzo Marino and published by Firenze University Press. This book was released on 2010 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a numerical model capable of simulating offshore wind turbines exposed to extreme loading conditions. External condition-based extreme responses are reproduced by coupling a fully nonlinear wave kinematic solver with a hydro-aero-elastic simulator. First, a two-dimensional fully nonlinear wave simulator is developed. The transient nonlinear free surface problem is formulated assuming the potential theory and a high-order boundary element method is implemented to discretize Laplace's equation. For temporal evolution a second-order Taylor series expansion is used. The code, after validation with experimental data, is successfully adopted to simulate overturning plunging breakers which give rise to dangerous impact loads when they break against wind turbine substructures. Emphasis is then placed on the random nature of the waves. Indeed, through a domain decomposition technique a global simulation framework embedding the numerical wave simulator into a more general stochastic environment is developed. The proposed model is meant as a contribution to meet the more and more pressing demand for research in the offshore wind energy sector as it permits taking into account dangerous effects on the structural response so as to increase the global structural safety level.
Book Synopsis Modeling and Simulation of Offshore Wind Farms for Smart Cities by : Cheng Siong Chin
Download or read book Modeling and Simulation of Offshore Wind Farms for Smart Cities written by Cheng Siong Chin and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind turbine models and simulations are widely available, but the simulation of a wind farm is scarce. This chapter presents a systematic approach to simulate an offshore wind farm for smart cities. The subsystems of several variable-pitch wind turbines, namely, rotor blades, drivetrain, and induction generator, are modeled to form a wind farm. The total output power of the wind farm by considering multiple wind turbines with the wake losses (using the Jensen wake model) can be simulated with any input wind speed. In order to validate the accuracy of the simulation, a case study was performed on a German offshore wind farm called NordseeOst. The simulation shows promising results with an average error of approximately 5% when compared with the real-time output of the wind farm. The results showed that the simulation of a wind farm that often impeded by the lack of exact information is feasible before any site implementation for smart cities.
Book Synopsis A comparison of methods for computation of wave forcing by : Olga Glöckner
Download or read book A comparison of methods for computation of wave forcing written by Olga Glöckner and published by GRIN Verlag. This book was released on 2018-05-17 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diploma Thesis from the year 2014 in the subject Engineering - Civil Engineering, grade: 1,0, University of Hannover (A&M University Texas, Ludwig-Franzius-Institut für Wasserbau, Ästuar- und Küsteningenieurwesen), language: English, abstract: Unlike fossil fuels (for example oil, coal and natural gas), wind energy is a renewable energy resource. Since winds at sea are stronger and more consistent than onshore winds, the demand for offshore wind turbines has increased over the last years. As energy can be produced more efficient in deeper water, several floating offshore wind turbine constructions, such as the OC3 Hywind spar-buoy, have been proposed. The design of floating wind turbines depends on the simulation of the system behavior caused by exciting forces. This thesis deals with the comparison between different methods for calculating wave forces and resulting platform motions of a floating offshore wind turbine. On the one hand, wave exciting loads computed with Morison’s equation are compared to the hydrodynamic forces simulated by the open source code FAST on the basis of the diffraction theory. On the other hand, response motions of the floating structure are simulated by the commercial offshore software SESAM in the frequency domain and compared with the motions calculated by FAST in the time domain.
Book Synopsis Recent Advances in CFD for Wind and Tidal Offshore Turbines by : Esteban Ferrer
Download or read book Recent Advances in CFD for Wind and Tidal Offshore Turbines written by Esteban Ferrer and published by Springer. This book was released on 2019-02-06 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents novel Computational Fluid Dynamics (CFD) techniques to compute offshore wind and tidal applications. The papers in this volume are based on a mini-symposium held at ECCOMAS 2018. Computational fluid dynamics (CFD) techniques are regarded as the main design tool to explore the new engineering challenges presented by offshore wind and tidal turbines for energy generation. The difficulty and costs of undertaking experimental tests in offshore environments have increased the interest in CFD which is used to design appropriate turbines and blades, understand fluid flow physical phenomena associated with offshore environments, predict power production or characterise offshore environments amongst other topics.
Book Synopsis Low-computational-cost Parabolic RANS Solver for Simulating and Optimizing Wind Turbine Columns by : Vignesh Santhanagopalan
Download or read book Low-computational-cost Parabolic RANS Solver for Simulating and Optimizing Wind Turbine Columns written by Vignesh Santhanagopalan and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A computational fluid dynamics tool for prediction of wakes and their interactions within a wind turbine column is presented. A Reynolds-averaged Navier-Stokes (RANS) solver is developed for axisymmetric wake flows using parabolic and boundary-layer approximations, in order to achieve a good trade-off between computational cost and accuracy, with the aim of application in optimization problems of wind farms. Boussinesq hypothesis and a length scale varying as a function of the streamwise location, calibrated from higher accuracy large eddy simulation (LES) dataset, are modeled through a mixing length model and a parabolic transport equation of the turbulent kinetic energy. The novelty of this work consists in modeling the mixing length to accurately predict time-averaged velocity field in the presence of wake interactions as well as varying incoming free-stream turbulence. The actuator disc model is implemented in the parabolic scheme for simulating turbine effects and estimating power production. The RANS simulations have a good agreement with the LES dataset in comparing the wake field, time-averaged turbulence statistics and power production, for cases designed to test effects of tip speed ratio, spacing between turbines and free-stream turbulence. Furthermore, the RANS solver is also assessed with good agreement with wind tunnel experiments of a turbine model. The tool is then leveraged in optimization problems considering different algorithms and objective functions. The proposed Parabolic RANS (P-RANS) solver is a great alternative for analytical and engineering wake models in obtaining more accurate predictions while requiring two orders of magnitude lesser computation than LES.
Book Synopsis Technical-economic Analysis, Modeling and Optimization of Floating Offshore Wind Farms by : Markus Lerch
Download or read book Technical-economic Analysis, Modeling and Optimization of Floating Offshore Wind Farms written by Markus Lerch and published by . This book was released on 2020 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The offshore wind sector has grown significantly during the last decades driven by the increasing demand for clean energy and to reach defined energy targets based on renewable energies. As the wind speeds tend to be faster and steadier offshore, wind farms at sea can reach higher capacity factors compared to their onshore counterparts. Furthermore, fewer restrictions regarding land use, visual impact, and noise favors the application of this technology. However, most of today's offshore wind farms use bottom-fixed foundations that limit their feasible application to shallow water depths.Floating substructures for offshore wind turbines are a suitable solution to harness the full potential of offshore wind as they have less constraints to water depths and soil conditions and can be applied from shallow to deep waters. As several floating offshore wind turbine (FOWT) concepts have been successfully tested in wave tanks and prototypes have been proven in open seas, floating offshore wind is now moving towards the commercial phase with the first floating offshore wind farm (FOWF) commissioned in 2017 and several more are projected to be constructed in 2020. This transition increases the need for comprehensive tools that allow to model the complete system and to predict its behavior as well as to assess the performance for different locations. The aim of this thesis is to analyze from a technical and economic perspective commercial scale FOWFs. This includes the modeling of FOWTs and the study of their dynamic behavior as well as the economic assessment of different FOWT concepts. The optimization of the electrical layout is also addressed in this thesis.The first model developed is applied to analyze the performance of a Spar type FOWT. The model is tested with different load cases and compared to a reference model. The results of both models show an overall good agreement. Afterwards, the developed model is applied to study the behavior of the FOWT with respect to three different offshore sites. Even at the site with the harshest conditions and largest motions, no significant loss in energy generation is measured, which demonstrates the good performance of this concept. The second model is used to perform a technical-economic assessment of commercial scale FOWFs. It includes a comprehensive LCOE methodology based on a life cycle cost estimation as well as the computation of the energy yield. The model is applied to three FOWT concepts located at three different sites and considering a 500MW wind farm configuration. The findings indicate that FOWTs are a high competitive solution and energy can be produced at an equal or lower LCOE compared to bottom-fixed offshore wind or ocean energy technologies. Furthermore, a sensitivity analysis is performed to identify the key parameters that have a significant influence on the LCOE and which can be essential for further cost reductions.The last model is aimed to optimize the electrical layout of FOWFs based on the particle swarm optimization theory. The model is validated against a reference model at first and is then used to optimize the inter-array cable routing of a 500MW FOWF. The obtained electrical layout results in a reduction of the power cable costs and a decrease of the energy losses. Finally, the use of different power cable configurations is studied and it is shown that the use of solely dynamic power cables in comparison to combined dynamic and static cables results in decreased acquisition and installation costs due to the avoidance of cost-intensive submarine joints and additional installation activities.
Book Synopsis Development and Application of Incrementally Complex Tools for Wind Turbine Aerodynamics by : Christopher H. Gundling
Download or read book Development and Application of Incrementally Complex Tools for Wind Turbine Aerodynamics written by Christopher H. Gundling and published by . This book was released on 2013 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and availability of computational resources have made wind farm design using simulation tools a reality. Wind farms are battling two issues, affecting the cost of energy, that will make or break many future investments in wind energy. The most significant issue is the power reduction of downstream turbines operating in the wake of upstream turbines. The loss of energy from wind turbine wakes is difficult to predict and the underestimation of energy losses due to wakes has been a common problem throughout the industry. The second issue is a shorter lifetime of blades and past failures of gearboxes due to increased fluctuations in the unsteady loading of waked turbines. The overall goal of this research is to address these problems by developing a platform for a multi-fidelity wind turbine aerodynamic performance and wake prediction tool. Full-scale experiments in the field have dramatically helped researchers understand the unique issues inside a large wind farm, but experimental methods can only be used to a limited extent due to the cost of such field studies and the size of wind farms. The uncertainty of the inflow is another inherent drawback of field experiments. Therefore, computational fluid dynamics (CFD) predictions, strategically validated using carefully performed wind farm field campaigns, are becoming a more standard design practice. The developed CFD models include a blade element model (BEM) code with a free-vortex wake, an actuator disk or line based method with large eddy simulations (LES) and a fully resolved rotor based method with detached eddy simulations (DES) and adaptive mesh refinement (AMR). To create more realistic simulations, performance of a one-way coupling between different mesoscale atmospheric boundary layer (ABL) models and the three microscale CFD solvers is tested. These methods are validated using data from incrementally complex test cases that include the NREL Phase VI wind tunnel test, the Sexbierum wind farm and the Lillgrund offshore wind farm. By cross-comparing the lowest complexity free-vortex method with the higher complexity methods, a fast and accurate simulation tool has been generated that can perform wind farm simulations in a few hours.
Book Synopsis Analysis and Study of Floating Offshore Wind Turbines by : Mehran Ahmadi
Download or read book Analysis and Study of Floating Offshore Wind Turbines written by Mehran Ahmadi and published by . This book was released on 2013 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Floating wind turbines offer a means to vastly expand the number of possible sites for offshore wind energy plants. By using a floating support platform secured by mooring lines, a wind turbine can be installed in waters exceeding the 30m depth that limits installation of conventional bottom-fixed offshore wind turbines. However, to be economically viable advances in floating offshore wind turbine system design and deployment are necessary to significantly reduce the cost and improve the reliability of floating wind turbines. This thesis develops a model-based simulation of floating offshore wind turbines in the MATLAB/Simulink environment. When necessary, the National Renewable Energy Laboratory's FAST code is used to conduct wind turbine simulations. Methods to link FAST to Simulink are developed in this thesis to accomplish this task. Modeling the wind turbine in the Simulink environment enables an efficient system level view of the entire wind turbine system. A number of design approaches to reduce the cost of offshore turbines are proposed in this thesis and studied in this modeling environment. A doubly-fed induction generator (DFIG) is proposed for wind turbine application. The primary advantage of DFIGs for wind turbines is that they allow the amplitude and frequency of their output voltages to be maintained at a constant value, no matter the wind speed. Because of this feature, DFIGs can be directly connected to the AC power network and remain synchronized at all times with that power network. Another advantage is the ability to control the power factor while keeping the power electronic devices in the wind turbine at a moderate size. In order to link a Simulink DFIG model to FAST, the model must be expressed in time domain. This thesis develops the time-domain modeling and simulation of DFIGs. Floating offshore wind turbines encounter greatly increased loading, which decreases fatigue life. One method to reduce the cost and mitigate offshore wind turbine structural loads is the application of structural control techniques commonly used in skyscrapers and bridges. Tuned mass dampers have been used to reduce loads in simulations of offshore wind turbines. This thesis discusses expanding the structural control methods by developing a set of optimum passive and active tuned mass dampers for offshore wind turbine platforms. Additionally, a new, high-efficiency, DC/DC bidirectional converter for a power quality conditioner for floating offshore wind turbines is proposed and analyzed. The power quality conditioner is used to smooth the variable turbine power and the DC/DC bidirectional converter acts as an interface circuit between the DC bus and ultracapacitors to manage the power flow during charging and discharging modes. Simulation results and experimental results are presented to verify the operation of the converter.
Book Synopsis High-fidelity Simulation and Analysis of a Floating Offshore Wind Turbine Under Extreme Wave and Wind Conditions by : Friedemann Borisade
Download or read book High-fidelity Simulation and Analysis of a Floating Offshore Wind Turbine Under Extreme Wave and Wind Conditions written by Friedemann Borisade and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Numerical Computation of Wind Turbine Flows and Fluid Problem by OpenFOAM and ANSYS by : Yi-Ching Wang
Download or read book Numerical Computation of Wind Turbine Flows and Fluid Problem by OpenFOAM and ANSYS written by Yi-Ching Wang and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy is the mainstream source of clean and renewable energy and it is also the fastest-growing source of sustainable energy in the world. In the Global Wind Energy Council's report in 2014, wind industry grew 44% worldwide. In order to optimize the efficiency of wind farms, it is important to observe wake interactions among wind turbines. Computational mathematics and mechanics provide fundamental methods and tools for simulating physical processes. Numerical computation can offer important insights and data that are either difficult or expensive to measure or to perform tests experimentally. In this dissertation, we use Computational Fluid Dynamics (CFD) software OpenFOAM and ANSYS FLUENT to simulate the wake effect of Horizontal Axis Wind Turbines (HAWT) and related problems. Numerical simulation can also help us comprehend and control man-made disasters. Air craft crashworthiness and human survivability are of utmost concerns in any emergency landing situation. Motivated by the air incidents lately, the disappearance of Malaysia Airlines Flight MH370 in March 2014 and Germanwings Flight 9525 crash in March 2015, we use Computational Structural Dynamics (CSD) software ANSYS Explicit Dynamics and LS-DYNA to try different numerical simulations of Airbus A320 crashing into a wall and compare the results to the reality. We calculate three CFD problems in this dissertation: lid-driven problems, one turbine wake problem, and two serial turbines wake problem. We simulate a lid-driven flow in both two- (2D) and three-dimension (3D) to compare the simulation capability of the three turbulence modelings, i.e., Direct Numerical Simulation (DNS), Large Eddy Simulation (LES), and Reynolds-Averaged Navier-Stokes Equations Simulation (RANS) by OpenFOAM. Among these three turbulence models, we can find that LES is capable of capturing more details of turbulence flow. We simulate the airflow effect of one wind turbine with both fixed angular velocity and wind-driven case, run benchmark tests based on NRELs reports, and compare the numerical results under the same condition by OpenFOAM and FLUENT. For the fixed angular velocity case, we use wind speed 8 m/s and angular velocity of the wind turbine 75 deg/s. For the wind-driven case, we use wind speed 8 m/s and 16 m/s and the angular velocity of the wind turbine calculated by FLUENT converges faster than OpenFOAM case. We simulate the interactions of wake flow for two serial wind turbines by FLUENT. We use wind speed 8 m/s and angular velocity of the wind turbine 75 deg/s. The wake of former turbine affects the rear one and the diffusion of flow caused by two turbines can be seen clearly. For both one and two serial turbines problems, the turbulence model RANS [lowercase kappa][lowercase epsilon] is used. We calculate and simulate Airbus A320 crashing into a wall by ANSYS Explicit Dynamics and LS-DYNA. For ANSYS Explicit Dynamics, we use the angle of approach 0°, 15°, and 30°. For LS-DYNA, we only test the pitch angles 0°. For all cases, we use the speed of aircarft 200 m/s. The deformation of both aircraft and wall can be seen clearly. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/155665
Book Synopsis Simulation of Wind Conditions for Offshore Wind Farms by : Kathryn Healey
Download or read book Simulation of Wind Conditions for Offshore Wind Farms written by Kathryn Healey and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Hybrid RANS-LES of the Atmospheric Boundary Layer for Wind Farm Simulations by : Christiane Adcock
Download or read book Hybrid RANS-LES of the Atmospheric Boundary Layer for Wind Farm Simulations written by Christiane Adcock and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
