Heat Transfer To A Full Coverage Film Cooled Surface With Compound Angle 30 And 45 Hole Injection

Author : Michael E. Crawford
Publisher :
ISBN 13 :
Total Pages : 256 pages
Book Rating : 4.F/5 ( download)

DOWNLOAD NOW!

Download or read book Heat transfer to a full-coverage film-cooled surface with 30 ̊slant-hole injection written by Michael E. Crawford and published by . This book was released on 1976 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat transfer behavior was studied in a turbulent boundary layer with full coverage film cooling through an array of discrete holes and with injection 30 deg to the wall surface in the downstream direction. Stanton numbers were measured for a staggered hole pattern with pitch-to-diameter ratios of 5 and 10, an injection mass flux ratio range of 0.1 to 1.3, and a range of Reynolds number Re sub x of 150,000 to 5 million. Air was used as the working fluid, and the mainstream velocity varied from 9.8 to 34.2 m/sec (32 to 112 ft/sec). The data were taken for secondary injection temperature equal to the wall temperature and also equal to the mainstream temperature. The data may be used to obtain Stanton number as a continuous function of the injectant temperature by use of linear superposition theory. The heat transfer coefficient is defined on the basis of a mainstream-to-wall temperature difference. This definition permits direct comparison of performance between film cooling and transpiration cooling. A differential prediction method was developed to predict the film cooling data base. The method utilizes a two-dimensional boundary layer program with routines to model the injection process and turbulence augmentation. The program marches in the streamwise direction, and when a row of holes is encountered, it stops and injects fluid into the boundary layer. The turbulence level is modeled by algebraically augmenting the mixing length, with the augmentation keyed to a penetration distance for the injected fluid.--(NTRL site)