Finite Element Analysis Of Low Speed Compressible Flows Within Convectively Cooled Structures

Author : Mohammad Kouhi
Publisher :
ISBN 13 :
Total Pages : 111 pages
Book Rating : 4.:/5 (112 download)

DOWNLOAD NOW!

Download or read book A Contribution to the Finite Element Analysis of High-Speed Compressible Flows and Aerodynamics Shape Optimization written by Mohammad Kouhi and published by . This book was released on 2014 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work covers a contribution to two most interesting research elds in aerodynamics, the fi nite element analysis of high-speed compressible flows (Part I) and aerodynamic shape optimization (Part II). The fi rst part of this study aims at the development of a new stabilization formulation based on the Finite Increment Calculus (FIC) scheme for the Euler and Navier-Stokes equations in the context of the Galerkin nite element method (FEM). The FIC method is based on expressing the balance of fluxes in a spacetime domain of nite size. It is tried to prevent the creation of instabilities normally presented in the numerical solutions due to the high convective term and sharp gradients. In order to overcome the typical instabilities happening in the numerical solution of the high-speed compressible flows, two stabilization terms, called streamline term and transverse term, are added through the FIC formulation in space-time domain to the original conservative equations of mass, momentum and energy. Generally, the streamline term holding the direction of the velocity is responsible for stabilizing the spurious solutions produced from the convective term while the transverse term smooths the solution in the high gradient zones. An explicit fourth order Runge-Kutta scheme is implemented to advance the solution in time. In order to investigate the capability of the proposed formulation, some numerical test examples corresponding to subsonic, transonic and supersonic regimes for inviscid and viscous flows are presented. The behavior of the proposed stabilization technique in providing appropriate solutions has been studied especially near the zones where the solution has some complexities such as shock waves, boundary layer, stagnation point, etc. Although the derived methodology delivers precise results with a nearly coarse mesh, the mesh refinement technique is coupled in the solution to create a suitable mesh particularly in the high gradient zones. The comparison of the numerical results obtained from the FIC formulation with the reference ones demonstrates the robustness of the proposed method for stabilization of the Euler and Navier-Stokes equations. It is observed that the usual oscillations occur in the Galerkin FEM, especially near the high gradient zones, are cured by implementing the proposed stabilization terms. Furthermore, allowing the adaptation framework to modify the mesh, the quality of the results improves signi cantly. The second part of this thesis proposes a procedure for aerodynamic shape optimization combining Genetic Algorithm (GA) and mesh re nement technique. In particular, it is investigated the e ect of mesh re nement on the computational cost and solution accuracy during the process of aerodynamic shape optimization. Therefore, an adaptive remeshing technique is joined to the CFD solver for the analysis of each design candidate to guarantee the production of more realistic solutions during the optimum design process in the presence of shock waves. In this study, some practical transonic airfoil design problems using adap- tive mesh techniques coupled to Multi-Objective Genetic Algorithms (MOGAs) and Euler flow analyzer are addressed. The methodology is implemented to solve three practical design problems; the fi rst test case considers a reconstruction design optimization that minimizes the pressure error between a prede ned pressure curve and candidate pressure distribution. The second test considers the total drag minimization by designing airfoil shape operating at transonic speeds. For the final test case, a multi-objective design optimization is conducted to maximize both the lift to drag ratio (L/D) and lift coe cient (Cl). The solutions obtained with and without adaptive mesh re nement are compared in terms of solution accuracy and computational cost. These design problems under transonic speeds need to be solved with a ne mesh, particularly near the object, to capture the shock waves that will cost high computational time and require solution accuracy. By comparison of the the numerical results obtained with both optimization problems, the obtainment of direct bene ts in the reduction of the total computational cost through a better convergence to the final solution is evaluated. Indeed, the improvement of the solution quality when an adaptive remeshing technique is coupled with the optimum design strategy can be judged.