Fault Diagnosis Applications

Download Fault Diagnosis Applications full books in PDF, epub, and Kindle. Read online Fault Diagnosis Applications ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Fault-Diagnosis Applications

Author : Rolf Isermann
Publisher : Springer Science & Business Media
ISBN 13 : 3642127673
Total Pages : 354 pages
Book Rating : 4.6/5 (421 download)

DOWNLOAD NOW!

Book Synopsis Fault-Diagnosis Applications by : Rolf Isermann

Download or read book Fault-Diagnosis Applications written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2011-04-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supervision, condition-monitoring, fault detection, fault diagnosis and fault management play an increasing role for technical processes and vehicles in order to improve reliability, availability, maintenance and lifetime. For safety-related processes fault-tolerant systems with redundancy are required in order to reach comprehensive system integrity. This book is a sequel of the book “Fault-Diagnosis Systems” published in 2006, where the basic methods were described. After a short introduction into fault-detection and fault-diagnosis methods the book shows how these methods can be applied for a selection of 20 real technical components and processes as examples, such as: Electrical drives (DC, AC) Electrical actuators Fluidic actuators (hydraulic, pneumatic) Centrifugal and reciprocating pumps Pipelines (leak detection) Industrial robots Machine tools (main and feed drive, drilling, milling, grinding) Heat exchangers Also realized fault-tolerant systems for electrical drives, actuators and sensors are presented. The book describes why and how the various signal-model-based and process-model-based methods were applied and which experimental results could be achieved. In several cases a combination of different methods was most successful. The book is dedicated to graduate students of electrical, mechanical, chemical engineering and computer science and for engineers.

Fault-Diagnosis Systems

Author : Rolf Isermann
Publisher : Springer Science & Business Media
ISBN 13 : 3540303685
Total Pages : 475 pages
Book Rating : 4.5/5 (43 download)

DOWNLOAD NOW!

Book Synopsis Fault-Diagnosis Systems by : Rolf Isermann

Download or read book Fault-Diagnosis Systems written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing demands for efficiency and product quality plus progress in the integration of automatic control systems in high-cost mechatronic and safety-critical processes, the field of supervision (or monitoring), fault detection and fault diagnosis plays an important role. The book gives an introduction into advanced methods of fault detection and diagnosis (FDD). After definitions of important terms, it considers the reliability, availability, safety and systems integrity of technical processes. Then fault-detection methods for single signals without models such as limit and trend checking and with harmonic and stochastic models, such as Fourier analysis, correlation and wavelets are treated. This is followed by fault detection with process models using the relationships between signals such as parameter estimation, parity equations, observers and principal component analysis. The treated fault-diagnosis methods include classification methods from Bayes classification to neural networks with decision trees and inference methods from approximate reasoning with fuzzy logic to hybrid fuzzy-neuro systems. Several practical examples for fault detection and diagnosis of DC motor drives, a centrifugal pump, automotive suspension and tire demonstrate applications.

Fault Diagnosis

Author : Józef Korbicz
Publisher : Springer Science & Business Media
ISBN 13 : 3642186157
Total Pages : 922 pages
Book Rating : 4.6/5 (421 download)

DOWNLOAD NOW!

Book Synopsis Fault Diagnosis by : Józef Korbicz

Download or read book Fault Diagnosis written by Józef Korbicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive work presents the status and likely development of fault diagnosis, an emerging discipline of modern control engineering. It covers fundamentals of model-based fault diagnosis in a wide context, providing a good introduction to the theoretical foundation and many basic approaches of fault detection.

Issues of Fault Diagnosis for Dynamic Systems

Author : Ron J. Patton
Publisher : Springer Science & Business Media
ISBN 13 : 1447136446
Total Pages : 612 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!

Book Synopsis Issues of Fault Diagnosis for Dynamic Systems by : Ron J. Patton

Download or read book Issues of Fault Diagnosis for Dynamic Systems written by Ron J. Patton and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the time our first book Fault Diagnosis in Dynamic Systems: The ory and Applications was published in 1989 by Prentice Hall, there has been a surge in interest in research and applications into reliable methods for diag nosing faults in complex systems. The first book sold more than 1,200 copies and has become the main text in fault diagnosis for dynamic systems. This book will follow on this excellent record by focusing on some of the advances in this subject, by introducing new concepts in research and new application topics. The work cannot provide an exhaustive discussion of all the recent research in fault diagnosis for dynamic systems, but nevertheless serves to sample some of the major issues. It has been valuable once again to have the co-operation of experts throughout the world working in industry, gov emment establishments and academic institutions in writing the individual chapters. Sometimes dynamical systems have associated numerical models available in state space or in frequency domain format. When model infor mation is available, the quantitative model-based approach to fault diagnosis can be taken, using the mathematical model to generate analytically redun dant alternatives to the measured signals. When this approach is used, it becomes important to try to understand the limitations of the mathematical models i. e. , the extent to which model parameter variations occur and the effect of changing the systems point of operation.

Advanced methods for fault diagnosis and fault-tolerant control

Author : Steven X. Ding
Publisher : Springer Nature
ISBN 13 : 3662620049
Total Pages : 664 pages
Book Rating : 4.6/5 (626 download)

DOWNLOAD NOW!

Book Synopsis Advanced methods for fault diagnosis and fault-tolerant control by : Steven X. Ding

Download or read book Advanced methods for fault diagnosis and fault-tolerant control written by Steven X. Ding and published by Springer Nature. This book was released on 2020-11-24 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book is to introduce advanced design and (online) optimization methods for fault diagnosis and fault-tolerant control from different aspects. Under the aspect of system types, fault diagnosis and fault-tolerant issues are dealt with for linear time-invariant and time-varying systems as well as for nonlinear and distributed (including networked) systems. From the methodological point of view, both model-based and data-driven schemes are investigated.To allow for a self-contained study and enable an easy implementation in real applications, the necessary knowledge as well as tools in mathematics and control theory are included in this book. The main results with the fault diagnosis and fault-tolerant schemes are presented in form of algorithms and demonstrated by means of benchmark case studies. The intended audience of this book are process and control engineers, engineering students and researchers with control engineering background.

Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace Vehicles

Author : Ali Zolghadri
Publisher : Springer Science & Business Media
ISBN 13 : 1447153138
Total Pages : 216 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!

Book Synopsis Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace Vehicles by : Ali Zolghadri

Download or read book Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.

Fault-tolerant Control Systems

Author : Hassan Noura
Publisher : Springer Science & Business Media
ISBN 13 : 1848826532
Total Pages : 233 pages
Book Rating : 4.8/5 (488 download)

DOWNLOAD NOW!

Book Synopsis Fault-tolerant Control Systems by : Hassan Noura

Download or read book Fault-tolerant Control Systems written by Hassan Noura and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.

Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems

Author : Steven X. Ding
Publisher : Springer Science & Business Media
ISBN 13 : 1447164105
Total Pages : 306 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!

Book Synopsis Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems by : Steven X. Ding

Download or read book Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems written by Steven X. Ding and published by Springer Science & Business Media. This book was released on 2014-04-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems presents basic statistical process monitoring, fault diagnosis, and control methods and introduces advanced data-driven schemes for the design of fault diagnosis and fault-tolerant control systems catering to the needs of dynamic industrial processes. With ever increasing demands for reliability, availability and safety in technical processes and assets, process monitoring and fault-tolerance have become important issues surrounding the design of automatic control systems. This text shows the reader how, thanks to the rapid development of information technology, key techniques of data-driven and statistical process monitoring and control can now become widely used in industrial practice to address these issues. To allow for self-contained study and facilitate implementation in real applications, important mathematical and control theoretical knowledge and tools are included in this book. Major schemes are presented in algorithm form and demonstrated on industrial case systems. Data-driven Design of Fault Diagnosis and Fault-tolerant Control Systems will be of interest to process and control engineers, engineering students and researchers with a control engineering background.

Intelligent Fault Diagnosis and Accommodation Control

Author : Sunan Huang
Publisher : CRC Press
ISBN 13 : 0429554443
Total Pages : 275 pages
Book Rating : 4.4/5 (295 download)

DOWNLOAD NOW!

Book Synopsis Intelligent Fault Diagnosis and Accommodation Control by : Sunan Huang

Download or read book Intelligent Fault Diagnosis and Accommodation Control written by Sunan Huang and published by CRC Press. This book was released on 2020-03-17 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems include many components, such as transducers, sensors, actuators and mechanical parts. These components are required to be operated under some specific conditions. However, due to prolonged operations or harsh operating environment, the properties of these devices may degrade to an unacceptable level, causing more regular fault occurrences. It is therefore necessary to diagnose faults and provide the fault-accommodation control which compensates for the fault of the component by substituting a configuration of redundant elements so that the system continues to operate satisfactorily. In this book, we present a result of several years of work in the area of fault diagnosis and fault-accommodation control. It aims at information estimate methods when faults occur. The book uses the model built from the plant or process, to detect and isolate failures, in contrast to traditional hardware or statistical technologies dealing with failures. It presents model-based learning and design technologies for fault detection, isolation and identification as well as fault-tolerant control. These models are also used to analyse the fault detectability and isolability conditions and discuss the stability of the closed-loop system. It is intended to report new technologies in the area of fault diagnosis, covering fault analysis and control strategies of design for various applications. The book addresses four main schemes: modelling of actuator or sensor faults; fault detection and isolation; fault identification, and fault reconfiguration (accommodation) control. It also covers application issues in the monitoring control of actuators, providing several interesting case studies for more application-oriented readers.

Diagnosis and Fault-Tolerant Control

Author : Mogens Blanke
Publisher : Springer Science & Business Media
ISBN 13 : 3662053446
Total Pages : 583 pages
Book Rating : 4.6/5 (62 download)

DOWNLOAD NOW!

Book Synopsis Diagnosis and Fault-Tolerant Control by : Mogens Blanke

Download or read book Diagnosis and Fault-Tolerant Control written by Mogens Blanke and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, test fault detectability and reveal redundancies that can be used to ensure fault tolerance. Case studies demonstrate the methods presented. The second edition includes new material on reconfigurable control, diagnosis of nonlinear systems, and remote diagnosis, plus new examples and updated bibliography.

Fault Detection and Diagnosis in Industrial Systems

Author : L.H. Chiang
Publisher : Springer Science & Business Media
ISBN 13 : 1447103475
Total Pages : 281 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!

Book Synopsis Fault Detection and Diagnosis in Industrial Systems by : L.H. Chiang

Download or read book Fault Detection and Diagnosis in Industrial Systems written by L.H. Chiang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early and accurate fault detection and diagnosis for modern chemical plants can minimize downtime, increase the safety of plant operations, and reduce manufacturing costs. This book presents the theoretical background and practical techniques for data-driven process monitoring. It demonstrates the application of all the data-driven process monitoring techniques to the Tennessee Eastman plant simulator, and looks at the strengths and weaknesses of each approach in detail. A plant simulator and problems allow readers to apply process monitoring techniques.

Computational Intelligence in Fault Diagnosis

Author : Vasile Palade
Publisher : Springer Science & Business Media
ISBN 13 : 184628631X
Total Pages : 374 pages
Book Rating : 4.8/5 (462 download)

DOWNLOAD NOW!

Book Synopsis Computational Intelligence in Fault Diagnosis by : Vasile Palade

Download or read book Computational Intelligence in Fault Diagnosis written by Vasile Palade and published by Springer Science & Business Media. This book was released on 2006-12-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent concerns and research results in industrial fault diagnosis using intelligent techniques. It focuses on computational intelligence applications to fault diagnosis with real-world applications used in different chapters to validate the different diagnosis methods. The book includes one chapter dealing with a novel coherent fault diagnosis distributed methodology for complex systems.

Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques

Author : Silvio Simani
Publisher : Springer Science & Business Media
ISBN 13 : 1447138295
Total Pages : 294 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!

Book Synopsis Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques by : Silvio Simani

Download or read book Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques written by Silvio Simani and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in industrial process and production plants is a concern of rising importance but because the control devices which are now exploited to improve the performance of industrial processes include both sophisticated digital system design techniques and complex hardware, there is a higher probability of failure. Control systems must include automatic supervision of closed-loop operation to detect and isolate malfunctions quickly. A promising method for solving this problem is "analytical redundancy", in which residual signals are obtained and an accurate model of the system mimics real process behaviour. If a fault occurs, the residual signal is used to diagnose and isolate the malfunction. This book focuses on model identification oriented to the analytical approach of fault diagnosis and identification covering: choice of model structure; parameter identification; residual generation; and fault diagnosis and isolation. Sample case studies are used to demonstrate the application of these techniques.

Fault-Tolerant Process Control

Author : Prashant Mhaskar
Publisher : Springer Science & Business Media
ISBN 13 : 1447148088
Total Pages : 279 pages
Book Rating : 4.4/5 (471 download)

DOWNLOAD NOW!

Book Synopsis Fault-Tolerant Process Control by : Prashant Mhaskar

Download or read book Fault-Tolerant Process Control written by Prashant Mhaskar and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault-Tolerant Process Control focuses on the development of general, yet practical, methods for the design of advanced fault-tolerant control systems; these ensure an efficient fault detection and a timely response to enhance fault recovery, prevent faults from propagating or developing into total failures, and reduce the risk of safety hazards. To this end, methods are presented for the design of advanced fault-tolerant control systems for chemical processes which explicitly deal with actuator/controller failures and sensor faults and data losses. Specifically, the book puts forward: · A framework for detection, isolation and diagnosis of actuator and sensor faults for nonlinear systems; · Controller reconfiguration and safe-parking-based fault-handling methodologies; · Integrated-data- and model-based fault-detection and isolation and fault-tolerant control methods; · Methods for handling sensor faults and data losses; and · Methods for monitoring the performance of low-level PID loops. The methodologies proposed employ nonlinear systems analysis, Lyapunov techniques, optimization, statistical methods and hybrid systems theory and are predicated upon the idea of integrating fault-detection, local feedback control, and supervisory control. The applicability and performance of the methods are demonstrated through a number of chemical process examples. Fault-Tolerant Process Control is a valuable resource for academic researchers, industrial practitioners as well as graduate students pursuing research in this area.

Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery

Author : Yaguo Lei
Publisher : Butterworth-Heinemann
ISBN 13 : 0128115351
Total Pages : 376 pages
Book Rating : 4.1/5 (281 download)

DOWNLOAD NOW!

Book Synopsis Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery by : Yaguo Lei

Download or read book Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery written by Yaguo Lei and published by Butterworth-Heinemann. This book was released on 2016-11-02 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Fault Diagnosis and Remaining Useful Life Prediction of Rotating Machinery provides a comprehensive introduction of intelligent fault diagnosis and RUL prediction based on the current achievements of the author's research group. The main contents include multi-domain signal processing and feature extraction, intelligent diagnosis models, clustering algorithms, hybrid intelligent diagnosis strategies, and RUL prediction approaches, etc. This book presents fundamental theories and advanced methods of identifying the occurrence, locations, and degrees of faults, and also includes information on how to predict the RUL of rotating machinery. Besides experimental demonstrations, many application cases are presented and illustrated to test the methods mentioned in the book. This valuable reference provides an essential guide on machinery fault diagnosis that helps readers understand basic concepts and fundamental theories. Academic researchers with mechanical engineering or computer science backgrounds, and engineers or practitioners who are in charge of machine safety, operation, and maintenance will find this book very useful. Provides a detailed background and roadmap of intelligent diagnosis and RUL prediction of rotating machinery, involving fault mechanisms, vibration characteristics, health indicators, and diagnosis and prognostics Presents basic theories, advanced methods, and the latest contributions in the field of intelligent fault diagnosis and RUL prediction Includes numerous application cases, and the methods, algorithms, and models introduced in the book are demonstrated by industrial experiences

Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems

Author : Hamid Reza Karimi
Publisher : Elsevier
ISBN 13 : 0128224738
Total Pages : 419 pages
Book Rating : 4.1/5 (282 download)

DOWNLOAD NOW!

Book Synopsis Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems by : Hamid Reza Karimi

Download or read book Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems written by Hamid Reza Karimi and published by Elsevier. This book was released on 2021-06-14 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Prognosis Techniques for Complex Engineering Systems gives a systematic description of the many facets of envisaging, designing, implementing, and experimentally exploring emerging trends in fault diagnosis and failure prognosis in mechanical, electrical, hydraulic and biomedical systems. The book is devoted to the development of mathematical methodologies for fault diagnosis and isolation, fault tolerant control, and failure prognosis problems of engineering systems. Sections present new techniques in reliability modeling, reliability analysis, reliability design, fault and failure detection, signal processing, and fault tolerant control of engineering systems. Sections focus on the development of mathematical methodologies for diagnosis and prognosis of faults or failures, providing a unified platform for understanding and applicability of advanced diagnosis and prognosis methodologies for improving reliability purposes in both theory and practice, such as vehicles, manufacturing systems, circuits, flights, biomedical systems. This book will be a valuable resource for different groups of readers - mechanical engineers working on vehicle systems, electrical engineers working on rotary machinery systems, control engineers working on fault detection systems, mathematicians and physician working on complex dynamics, and many more. Presents recent advances of theory, technological aspects, and applications of advanced diagnosis and prognosis methodologies in engineering applications Provides a series of the latest results, including fault detection, isolation, fault tolerant control, failure prognosis of components, and more Gives numerical and simulation results in each chapter to reflect engineering practices

Machine Learning-Based Fault Diagnosis for Industrial Engineering Systems

Author : Rui Yang
Publisher : CRC Press
ISBN 13 : 1000594939
Total Pages : 87 pages
Book Rating : 4.0/5 (5 download)

DOWNLOAD NOW!

Book Synopsis Machine Learning-Based Fault Diagnosis for Industrial Engineering Systems by : Rui Yang

Download or read book Machine Learning-Based Fault Diagnosis for Industrial Engineering Systems written by Rui Yang and published by CRC Press. This book was released on 2022-06-16 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides advanced techniques for precision compensation and fault diagnosis of precision motion systems and rotating machinery. Techniques and applications through experiments and case studies for intelligent precision compensation and fault diagnosis are offered along with the introduction of machine learning and deep learning methods. Machine Learning-Based Fault Diagnosis for Industrial Engineering Systems discusses how to formulate and solve precision compensation and fault diagnosis problems. The book includes experimental results on hardware equipment used as practical examples throughout the book. Machine learning and deep learning methods used in intelligent precision compensation and intelligent fault diagnosis are introduced. Applications to deal with relevant problems concerning CNC machining and rotating machinery in industrial engineering systems are provided in detail along with applications used in precision motion systems. Methods, applications, and concepts offered in this book can help all professional engineers and students across many areas of engineering and operations management that are involved in any part of Industry 4.0 transformation.