Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Fatigue Behaviour
Download Fatigue Behaviour full books in PDF, epub, and Kindle. Read online Fatigue Behaviour ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Fatigue in Composites by : Bryan Harris
Download or read book Fatigue in Composites written by Bryan Harris and published by Woodhead Publishing. This book was released on 2003-10-31 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A survey of work on the fatigue behavior of composites dealing with the problems met with by materials scientists and designers in aerospace, automotive, marine, and structural engineering. Including a historical review, standards, micromechanical aspects, life-prediction methods for constant stress and variable stress, and fatigue in practical situations.
Book Synopsis Thermo-mechanical Fatigue Behavior of Materials by : Huseyin Sehitoglu
Download or read book Thermo-mechanical Fatigue Behavior of Materials written by Huseyin Sehitoglu and published by ASTM International. This book was released on 2000 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Fatigue Behaviour of Fiber Reinforced Polymers by : Yao Weixing
Download or read book Fatigue Behaviour of Fiber Reinforced Polymers written by Yao Weixing and published by DEStech Publications, Inc. This book was released on 2012 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Book is organized around new experiments in and modeling of fatigue and its effects over a range of composite materials subjected to multiple mechanical and thermal stresses. An objective of the investigations discussed is to explain failure mechanisms and improve long-term loading prediction and performance.
Book Synopsis Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials by : P.D. Portella
Download or read book Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials written by P.D. Portella and published by Elsevier. This book was released on 1998-09-30 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials was held from 7-11 September 1998 in Garmisch-Partenkirchen, Germany. In response to a call for papers, nearly 200 extended abstracts from 32 countries were submitted to the organizing committee. These papers were presented at the conference as invited lectures or short contributions and as oral or poster presentation. All the papers were presented in poster form in extended poster sessions–a peculiarity of the LCF Conferences which allows an intense, thorough discussion of all contributions. Each chapter provides a comprehensive overview of a materials class or a given subject. Many contributions could have been included in two or even three chapters and so, in order to give a better overview of the content, the reader will find a subject index, a material index and an author index in the back of the book.
Book Synopsis Thermomechanical fatigue behavior of materials by : Michael J. Verrilli
Download or read book Thermomechanical fatigue behavior of materials written by Michael J. Verrilli and published by ASTM International. This book was released on 1996 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Thermomechanical Fatigue Behavior of Materials by : Huseyin Sehitoglu
Download or read book Thermomechanical Fatigue Behavior of Materials written by Huseyin Sehitoglu and published by ASTM International. This book was released on 1993 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis High Temperature Fatigue by : R.P. Skelton
Download or read book High Temperature Fatigue written by R.P. Skelton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 35 years ago, thermal fatigue was identified as an important phenomenon which limited the lifetime of high temperature plant. In the intervening years many investigations have been carried out, primarily to give guidance on likely endurance (especially in the presence of time dependent deformation) but latterly, with the introduction of sophisticated testing machines, to provide knowledge of the underlying mechanisms of failure. A previous edited book (Fatigue at High Temperature, Elsevier Applied Science Publishers, 1983) summarised the state-of-the-art of high temperature fatigue testing and examined the factors influencing life, such as stress state, environment and microstructural effects. It also considered, in some detail, cyclic crack growth as a more rigorous approach to life limitation. The aim of the present volume (which in style and format follows exactly the same lines as its predecessor) is once again to pursue the desire to translate detailed laboratory knowledge into engineering design and assessment. There is, for example, a need to consider the limitations of the laboratory specimen and its relationship with engineering features. Many design procedures still rely on a simple endurance approach based on failure of a smooth specimen, and this is taken to indicate crack initiation in the component. In this volume, therefore, crack propagation is covered only incidentally, emphasis being placed instead on basic cyclic stress strain properties, non-isothermal behaviour, metallography, failure criteria and the need for agreed testing procedures.
Author :FIB – International Federation for Structural Concrete Publisher :FIB - Féd. Int. du Béton ISBN 13 :2980676225 Total Pages :650 pages Book Rating :4.9/5 (86 download)
Book Synopsis 10th PhD Symposium in Quebec Canada by : FIB – International Federation for Structural Concrete
Download or read book 10th PhD Symposium in Quebec Canada written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2014-07-01 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Fatigue of Textile Composites by : Valter Carvelli
Download or read book Fatigue of Textile Composites written by Valter Carvelli and published by Elsevier. This book was released on 2015-05-16 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of Textile Composites provides a current, state-of-art review on recent investigations on the fatigue behavior of composite materials, mainly those reinforced with textiles. As this particular group of composite materials is extremely important for a wide variety of industrial applications, including automotive, aeronautical, and marine, etc., mainly due to their peculiarities and advantages with respect to unidirectional laminated composites, the text presents comprehensive information on the huge variety of interlacement geometric architectures that are suitable for a broad range of different applications, their excellent drapability and versatility, which is highly important for complex double-curvature shape components and three-dimensional woven fabrics without plane reinforcement, and their main mechanical characteristics which are currently in high demand from industry. - Presents the current state-of-the-art investigations on fatigue behavior of composite materials, mainly those reinforced with textiles - Contains invaluable information pertaining to a wide variety of industries, including automotive, aeronautical, and marine, amongst others - Provides comprehensive information on the huge variety of interlacement geometric architectures that are suitable for a broad range of different applications
Book Synopsis Self-Piercing Riveting by : A Chrysanthou
Download or read book Self-Piercing Riveting written by A Chrysanthou and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its speed, low energy requirements, and the fact that it does not require a pre-drilled hole, the technique of self-piercing riveting (SPR) has been increasingly adopted by many industries as a high-speed mechanical fastening technique for the joining of sheet material components. Self-piercing riveting comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting, and also describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing.Part one provides an extensive overview of the properties of self-piercing riveting. Chapters in this section review the mechanical strength, fatigue, and corrosion behaviour of self-piercing riveted joints. The second part of the book outlines the processing and applications of SPRs, and describes the dynamic strength evaluation/crashworthiness of SPRs, and the modelling of strength of self-piercing riveted joints, before going on to discuss the assessment of the suitability of materials for self-piercing riveting. The concluding chapters describe the quality control and non-destructive testing of self-piercing riveted joints, optimization of the strength of self-piercing rivets, and provides an overview of self-piercing rivets in the automotive industry and the applications of self-piercing riveting in automated vehicle construction.Self-piercing riveting is a standard reference for engineers and designers in the aerospace, materials, welding, joining, automotive and white goods industries, as well as manufacturers of metal components for the automotive, aerospace, white goods and building industries. - Comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting - Describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing - Provides an overview of quality, optimization, applications and strength evaluations of self-piercing riveting
Book Synopsis Fatigue of Metals by : P. G. Forrest
Download or read book Fatigue of Metals written by P. G. Forrest and published by Elsevier. This book was released on 2013-10-22 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of Metals provides a general account of the failure of metals due to fatigue, a subject of great practical importance in the field of engineering and metallurgy. The book covers a wide range of topics on the study of the fatigue of metals. The text presents in the first three chapters the characteristics and detection of fatigue fractures; methods of fatigue testing; and the fatigue strengths of different materials. The resistance of materials to fatigue under complex stress; the determination and effects of stress concentration; influence of surface treatment on fatigue strength; and effects of corrosion and temperature are also studied in detail. In relation to the previous chapters of fatigue information, a chapter is devoted to engineering design to prevent fatigue. The last two chapters provide a brief historical survey of the developments of the study of the mechanism of fatigue and fatigue of non-metallic materials such as wood, plastic, rubber, glass, and concrete. Mechanical engineers, designers, metallurgists, researchers, and students will find the book as a good reference material.
Book Synopsis Applied Mechanics, Behavior of Materials, and Engineering Systems by : Taoufik Boukharouba
Download or read book Applied Mechanics, Behavior of Materials, and Engineering Systems written by Taoufik Boukharouba and published by Springer. This book was released on 2016-08-31 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in mechanics, with a special emphasis on material mechanics. It reports on fracture mechanics, fatigue of materials, stress-strain behaviours, as well as transferability problems and constraint effects in fracture mechanics. It covers different kind of materials, from metallic materials such as ferritic and austenitic steels, to composites, concrete, polymers and nanomaterials. Additional topics include heat transfer, quality control and reliability of structures and components. Furthermore, the book gives particular attention to new welding technologies such as STIR welding and spray metal coating, and to novel methods for quality control, such as Taguchi design, fault diagnosis and wavelet analysis. Based on the 2015 edition of the Algerian Congress of Mechanics (Congrès Algérien de Mécanique, CAM), the book also covers energetics, in terms of simulation of turbulent reactive flow, behaviour of supersonic jet, turbulent combustion, fire induced smoke layer, and heat and mass transfer, as well as important concepts related to human reliability and safety of components and structures. All in all, the book represents a complete, practice-oriented reference guide for both academic and professionals in the field of mechanics.
Book Synopsis Multiaxial Notch Fatigue by : Luca Susmel
Download or read book Multiaxial Notch Fatigue written by Luca Susmel and published by Elsevier. This book was released on 2009-03-20 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal and composite components used in structural engineering not only contain geometrical features resulting in stress concentration phenomena, but they are also subjected to in-service multiaxial fatigue loading. To address the problem, structural engineers need reliable methodologies which allow for an adequate margin of safety. The book summarises methods devised by the author to design real components against multiaxial fatigue by taking full advantage not only of nominal but also of local stress-strain quantities.The book begins by reviewing definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment. The Modified Wöhler Curve Method is then explained in detail, by focusing attention on both the high- and the medium-cycle fatigue regime. The existing links between the multiaxial fatigue criterion and physical properties are also discussed. A procedure suitable for employing the method developed by the author to estimate fatigue damage both in notched and in welded components is explained. The Modified Manson-Coffin Curve method is investigated in depth, by reviewing those concepts playing a fundamental role in the so-called strain based approach. Lastly, the problem of performing the fatigue assessment of composite materials is addressed by considering design parameters influencing composite behaviour under complex cyclic loading paths and those criteria suitable for designing real components against multiaxial fatigue. The book also contains two appendices summarising experimental data from the technical literature. These appendices provide a unique and highly valuable resource for engineers. The appendices summarise around 100 values of the material characteristic length L, experimentally determined by testing specimens made of different engineering materials and about 4500 experimental fatigue results generated by testing plain, notched and welded specimens under constant-amplitude proportional and non-proportional multiaxial fatigue loading are listed. - Summarises methods devised by the author to design real components against multiaxial fatigue - Reviews definitions suitable for calculating the stress-strain quantities commonly used to perform fatigue assessment - Includes an in-depth explanation of both the Modified Wöhler Curve and Modified Manson-Coffin Curve Method
Book Synopsis Fatigue Failure of Textile Fibres by : M Miraftab
Download or read book Fatigue Failure of Textile Fibres written by M Miraftab and published by Elsevier. This book was released on 2009-04-21 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibres are used both for traditional textile applications as well as in advanced technical structures. Understanding the fatigue processes in these fibres can suggest ways of eliminating or reducing the probability of unforeseen failures. This book addresses key aspects of fatigue failure in textile fibres.Part one explains the different types of fatigue failure in textiles such as tensile, torsional and flex fatigue. It describes the mechanisms of each type of fatigue and illustrates the kinds of fatigue failure that can occur. Part two moves on to explain the factors that can affect fatigue life and fatigue behaviour. It underlines the relationship that fatigue has with the environment and looks at testing and modelling fatigue in such areas as polymer matrices. Chapters relate actual fibre fatigue failures to those of laboratory tests and the way they influence mathematical modelling to predict potential failure.With an international range of contributors Fatigue failure of textile fibres is key reading for textile engineers, academics, textile technologists, fibre scientists and all those concerned with the topic of fatigue failure in textiles and textile-based assemblies. - Addresses key aspects of fatigue failure in textile fibres including tensile, flex and torsional fatigue - Examines factors that can effect fatigue life and fatigue behaviour including textile processing and environmental factors
Book Synopsis Experimental Techniques and Design in Composite Materials by : M.S. Found
Download or read book Experimental Techniques and Design in Composite Materials written by M.S. Found and published by CRC Press. This book was released on 2002-01-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the revised versions of papers presented at the 4th Seminar on Experimental Techniques and Design in Composite Materials. The papers have been divided into five sections: fatigue, test methods, design, impact and modelling.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :2883940827 Total Pages :134 pages Book Rating :4.8/5 (839 download)
Book Synopsis Constitutive Modelling of High Strength/high Performance Concrete by : fib Fédération internationale du béton
Download or read book Constitutive Modelling of High Strength/high Performance Concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Strength/High Performance Concrete (HSC/HPC) continues to be the object of particular interest and extensive research, and its use in construction is increasing continuously. fib Bulletin 42 summarises the available information on the material behaviour of HSC/HPC, and develops a set of code-type constitutive relations as an extension of CEB-FIP Model Code 1990. Literature on experimental data and international guidelines, standards and recommendations were reviewed, and already-existing constitutive relations and models were evaluated. In addition to a number of material laws chosen and adjusted for this report, some new constitutive relations were developed based on the collected data. The criteria for the choice of the existing relations as well as the development of the new constitutive relations involved their simplicity and operationality (code-type mathematical formulations). Furthermore, they had to be physically sound and if possible describe the behaviour of both high-performance and normal strength concretes by a unique relation. Finally, compliance with the specifications given in the CEB-FIP Model Code 1990 was examined. This State-of-art report is intended for engineers and represents a summary of the relevant knowledge available to and possessed by the members of the Task Group at the time of its drafting.
Book Synopsis Non-Crimp Fabric Composites by : Stepan V Lomov
Download or read book Non-Crimp Fabric Composites written by Stepan V Lomov and published by Elsevier. This book was released on 2011-04-19 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-crimp fabric (NCF) composites are reinforced with mats of straight (non-crimped) fibres, giving them such advantages as strength, ease of handling and low manufacturing costs. Non-crimp fabric composites provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering.Part one covers the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis. Part two goes on to discuss the manufacture of non-crimp fabric composites, with chapters covering such topics as deformability and permeability of NCF. Part three focuses on the properties of NCF composites, with chapters on stiffness and strength, damage progression and fatigue. Finally, part four covers the applications of NCF composites, including chapters on the aerospace and automotive industries as well as wind turbines and helicopter applications. The book concludes with a discussion of cost analysis of NCF composites in engineering applications.With its distinguished editor and international team of expert contributors, Non-crimp fabric composites is an essential reference for composite manufacturers and structural and mechanical engineers in industries using NCF composites, as well as academics with a research interest in the field. - Provides a comprehensive review of the use of NCF composites, their manufacture and applications in engineering - Reviews the manufacture of non-crimp fabrics, including also topics such as structural stitching and automated defect analysis - Examines the properties of NCF composites considering stiffness and strength, damage progression and fatigue
