Fabrication Morphologies And Properties Of Single Polymer Composites Based On Lldpe Pp And Cnt Loaded Pbt

Download Fabrication Morphologies And Properties Of Single Polymer Composites Based On Lldpe Pp And Cnt Loaded Pbt full books in PDF, epub, and Kindle. Read online Fabrication Morphologies And Properties Of Single Polymer Composites Based On Lldpe Pp And Cnt Loaded Pbt ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Fabrication, Morphologies and Properties of Single Polymer Composites Based on LLDPE, PP, and CNT Loaded PBT

Author : Md. Zillur Rahman
Publisher :
ISBN 13 :
Total Pages : 146 pages
Book Rating : 4.:/5 (857 download)

DOWNLOAD NOW!

Book Synopsis Fabrication, Morphologies and Properties of Single Polymer Composites Based on LLDPE, PP, and CNT Loaded PBT by : Md. Zillur Rahman

Download or read book Fabrication, Morphologies and Properties of Single Polymer Composites Based on LLDPE, PP, and CNT Loaded PBT written by Md. Zillur Rahman and published by . This book was released on 2013 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into and development of single polymer composites (SPCs) have increased consistently over the last decade, due to growing concerns for the environment. SPCs are an emerging class of materials of composites which have improved mechanical properties compared with their larger homogeneous counterparts. These SPCs have economic and environmental benefits and are fully recyclable. This research aimed to produce fibrillar SPCs of low linear density polyethylene (LLDPE), polypropylene (PP) (lower melt flow grade) and carbon nanotubes loaded poly(butylene terephthalate) (PBT-CNT) by using the concept of microfibrillar reinforcement composites (MFCs) manufacturing technique via a simple extrusion, drawing and processing technique. Microfibrillar single polymer composites (MF-SPCs) were prepared by the hot-compaction of PBT-CNT, LLDPE and PP555G fibrils extracted by using selective solvents from the immiscible drawn blends of PP (higher melt flow grade)/PBT-CNT, polyvinyl alcohol (PVA)/LLDPE and PVA/PP555G respectively, and were then characterised by their thermal, morphological, mechanical, and electrical behaviour (only for PBT-CNT MF-SPCs samples). LLDPE MF-SPCs and PP555G MF-SPCs can potentially be used in automotive and construction, and consumer products such as suitcases and sporting apparel. The resulting uniaxial composites showed excellent improvements in stiffness of 65% for PBTCNT (30%) MF-SPCs, 194% for PBT-CNT (50%) MF-SPCs, 307% for LLDPE MF-SPCs and 367% for PP (lower melt flow grade) MF-SPCs over their respective neat isotropic PBT-CNT, LLDPE and PP samples. The microfibrillar structure and excellent orientation with high aspect ratios were maintained and observed using scanning electron microscopy (SEM). PBT-CNT MFSPCs demonstrated moderately electrical conductive behaviour, which probably could be used in a variety of industrial applications such as in sensors, self-regulating heaters and electromagnetic interference shielding. The thesis concludes with suggestions for further research in the future, based on the findings of this study.

Synthetic and Mineral Fibers, Their Composites and Applications

Author : Sanjay Mavinkere Rangappa
Publisher : Elsevier
ISBN 13 : 0443136246
Total Pages : 826 pages
Book Rating : 4.4/5 (431 download)

DOWNLOAD NOW!

Book Synopsis Synthetic and Mineral Fibers, Their Composites and Applications by : Sanjay Mavinkere Rangappa

Download or read book Synthetic and Mineral Fibers, Their Composites and Applications written by Sanjay Mavinkere Rangappa and published by Elsevier. This book was released on 2024-08-09 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic and Mineral Fibers, Their Composites and Applications reviews recent advances and technological developments in this important research field. The book provides an up-to-date record of significant research findings and observations along with an update on current and future potential applications. The book provides vital information on recent advancements, modern processing technologies, manufacturing, and applications and summarizes lifecycle and performance parameters for these types of composites. This book will be a valuable reference resource for academic and industrial researchers and materials scientists and engineers working in the development of polymer composite materials reinforced with synthetic and mineral fibers for applications in aerospace, medical, defense, automotive and construction sectors. Covers both synthetic and mineral fibers, their composites, and applications Highlights recent advances in mineral fiber- reinforced polymer composites, modern processing methods, and functionalization Provides updates on hybrid (combination of both synthetic and mineral fiber) composite technologies Features applications in aerospace, medical, defense and the construction industries

Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives

Author : Ramzi Khiari
Publisher : Springer Nature
ISBN 13 : 9819924731
Total Pages : 553 pages
Book Rating : 4.8/5 (199 download)

DOWNLOAD NOW!

Book Synopsis Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives by : Ramzi Khiari

Download or read book Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives written by Ramzi Khiari and published by Springer Nature. This book was released on 2023-07-01 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of the processing, properties, and applications of fibers and cellulose derivatives obtained from annual plant materials in the formation of non-wood source of pulp. The book comprises illustrations and tables summarizing the latest research on the production of fibers and cellulose derivatives using several key methods and/or characterization techniques. This book collates the information and knowledge of new ways to prepare cellulosic derivatives and describe the concepts and architecture of fibers obtained from annual plants. This book caters to researchers, policymakers, and industrial practitioners who are interested in natural fibers as a way to preserve the forest resource and to satisfy the increasing demand in pulps.

Single-Polymer Composites

Author : Samrat Mukhopadhyay
Publisher : CRC Press
ISBN 13 : 1351272225
Total Pages : 340 pages
Book Rating : 4.3/5 (512 download)

DOWNLOAD NOW!

Book Synopsis Single-Polymer Composites by : Samrat Mukhopadhyay

Download or read book Single-Polymer Composites written by Samrat Mukhopadhyay and published by CRC Press. This book was released on 2018-09-21 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the concept of single polymer composites (SPCs), their preparation, and properties and the main factors which affect the manufacturing of this class of composites. It deals with the leading classes of polymers, chapter wise, which have been majorly explored for manufacturing SPCs – polyolefins, polyesters, polyamides, and LCPs – includes a case study on manufacturing of SPCs, and devotes three chapters to detailed analyses of research on all-cellulose composites. Addressing the concerns of the researchers, it also answers intriguing questions in the field of SPCs with pointers to the right references. Key Features Presents a summary of single polymer composites based on various polymers Includes mechanical and thermal properties of single polymer composites Reviews detailed view of eco-friendly approaches to composites Offers a special focus on all-cellulose composites Supports concepts with figures, schemes, and tables

Polymer-Based Composites

Author : V. Arumugaprabu
Publisher : CRC Press
ISBN 13 : 1000433137
Total Pages : 176 pages
Book Rating : 4.0/5 (4 download)

DOWNLOAD NOW!

Book Synopsis Polymer-Based Composites by : V. Arumugaprabu

Download or read book Polymer-Based Composites written by V. Arumugaprabu and published by CRC Press. This book was released on 2021-08-23 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing use of composite materials over conventional materials has been a continual trend for over a decade. While the fundamental understanding of fiber reinforcement has not changed, many new material advancements have occurred, especially in manufacturing methods, and there is an ever-growing number of composite material applications across various industries. Polymer-Based Composites: Design, Manufacturing, and Applications presents the concepts and methods involved in the development of various fiber-reinforced composite materials. Features: Offers a comprehensive view of materials, mechanics, processing, design, and applications Bridges the gap between research, manufacturing science, and analysis and design Discusses composite materials composed of continuous synthetic fibers and matrices for use in engineering structures Presents codes and standards related to fiber-reinforced polymer composites Includes case studies and examples based on industrial, automotive, aerospace, and household applications This book is a valuable resource for advanced students, researchers, and industry personnel to understand recent advances in the field and achieve practical results in the development, manufacture, and application of advanced composite materials.

Lightweight Polymer Composite Structures

Author : Sanjay Mavinkere Rangappa
Publisher : CRC Press
ISBN 13 : 0429520824
Total Pages : 411 pages
Book Rating : 4.4/5 (295 download)

DOWNLOAD NOW!

Book Synopsis Lightweight Polymer Composite Structures by : Sanjay Mavinkere Rangappa

Download or read book Lightweight Polymer Composite Structures written by Sanjay Mavinkere Rangappa and published by CRC Press. This book was released on 2020-09-01 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive account of developments in the area of lightweight polymer composites. It encompasses design and manufacturing methods for the lightweight polymer structures, various techniques, and a broad spectrum of applications. The book highlights fundamental research in lightweight polymer structures and integrates various aspects from synthesis to applications of these materials. Features Serves as a one stop reference with contributions from leading researchers from industry, academy, government, and private research institutions across the globe Explores all important aspects of lightweight polymer composite structures Offers an update of concepts, advancements, challenges, and application of lightweight structures Current status, trends, future directions, and opportunities are discussed, making it friendly for both new and experienced researchers.

Polymer Composites, Nanocomposites

Author : Sabu Thomas
Publisher : John Wiley & Sons
ISBN 13 : 3527652396
Total Pages : 300 pages
Book Rating : 4.5/5 (276 download)

DOWNLOAD NOW!

Book Synopsis Polymer Composites, Nanocomposites by : Sabu Thomas

Download or read book Polymer Composites, Nanocomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2013-08-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are materials in which the matrix polymer is reinforced with organic/inorganic fillers of a definite size and shape, leading to enhanced performance of the resultant composite. These materials find a wide number of applications in such diverse fields as geotextiles, building, electronics, medical, packaging, and automobiles. This first systematic reference on the topic emphasizes the characteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia, government, industry, as well as private research institutions across the globe, and adopt a practical approach here, covering such aspects as the preparation, characterization, properties and theory of polymer composites. The book begins by discussing the state of the art, new challenges, and opportunities of various polymer composite systems. Interfacial characterization of the composites is discussed in detail, as is the macro- and micromechanics of the composites. Structure-property relationships in various composite systems are explained with the help of theoretical models, while processing techniques for various macro- to nanocomposite systems and the influence of processing parameters on the properties of the composite are reviewed in detail. The characterization of microstructure, elastic, viscoelastic, static and dynamic mechanical, thermal, tribological, rheological, optical, electrical and barrier properties are highlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites; Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.

Manufacturing of Polymer Composites

Author : B. Tomas Astrom
Publisher : Routledge
ISBN 13 : 1351433784
Total Pages : 500 pages
Book Rating : 4.3/5 (514 download)

DOWNLOAD NOW!

Book Synopsis Manufacturing of Polymer Composites by : B. Tomas Astrom

Download or read book Manufacturing of Polymer Composites written by B. Tomas Astrom and published by Routledge. This book was released on 2018-04-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.

Single Polymer Composites Based on Polypropylene

Author :
Publisher :
ISBN 13 :
Total Pages : 582 pages
Book Rating : 4.:/5 (94 download)

DOWNLOAD NOW!

Book Synopsis Single Polymer Composites Based on Polypropylene by :

Download or read book Single Polymer Composites Based on Polypropylene written by and published by . This book was released on 2004 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Polymer Composites, Macro- and Microcomposites

Author : Sabu Thomas
Publisher : John Wiley & Sons
ISBN 13 : 3527645233
Total Pages : 814 pages
Book Rating : 4.5/5 (276 download)

DOWNLOAD NOW!

Book Synopsis Polymer Composites, Macro- and Microcomposites by : Sabu Thomas

Download or read book Polymer Composites, Macro- and Microcomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2012-02-06 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first systematic reference on the topic with an emphasis on thecharacteristics and dimension of the reinforcement. This first of three volumes, authored by leading researchers inthe field from academia, government, industry, as well as privateresearch institutions around the globe, focuses on macro and microcomposites. Clearly divided into three sections, the first offers anintroduction to polymer composites, discussing the state of theart, new challenges, and opportunities of various polymer compositesystems, as well as preparation and manufacturing techniques. Thesecond part looks at macro systems, with an emphasis on fiberreinforced polymer composites, textile composites, and polymerhybrid composites. Likewise, the final section deals with microsystems, including micro particle reinforced polymer composites,the synthesis, surface modification and characterization of microparticulate fillers and flakes as well as filled polymer microcomposites, plus applications and the recovery, recycling and lifecycle analysis of synthetic polymeric composites.

Single Polymer Composites Made of Slowly Crystallizing Polymer

Author : Ruihua Li
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (668 download)

DOWNLOAD NOW!

Book Synopsis Single Polymer Composites Made of Slowly Crystallizing Polymer by : Ruihua Li

Download or read book Single Polymer Composites Made of Slowly Crystallizing Polymer written by Ruihua Li and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are widely used in an increasing number of applications in diverse fields. However, most traditional composite materials are difficult to recycle. Because of their enhanced recyclability, thermoplastic single-polymer composites (SPCs), i.e., composites with fiber and matrix made from the same thermoplastic polymer, have attracted much attention in the recent years. High-performance polymer fibers in combination with same polymer matrices would lead to a fully recyclable single polymer composite that has major ecological advantages. However, because a single polymer is involved in the composite, thermoplastic SPCs manufacturing presents a unique set of technical problems, and different approaches from those in standard composites manufacturing are frequently needed. Two specific issues in SPCs manufacturing are how to produce distinct forms of the same polymer and how to consolidate them. So far, most investigations have been reported on a single-component hot compaction method and two-component molecular methods. However, in these methods, either the processing window is too narrow or some impure materials are introduced into the system. The key issue in thermoplastic SPCs processing is how to melt-process the matrix without significantly annealing or even melting the fiber. To overcome the above drawbacks in existing SPCs processing, particularly to widen the SPCs processing temperature window and to purify the SPCs, a novel SPCs manufacturing process utilizing the characteristics of slowly crystallizing polymers was developed and investigated. Highly oriented and highly crystalline fibers made of a slowly crystallizing polymer are mixed with the amorphous form of the same polymer and then consolidated together under heat and pressure. In this dissertation research, two slowly crystallizing polymers, poly(ethylene terephthalate) (PET) and poly(lactic acid) (PLA), were used as model systems for SPCs processing. To study the deformation and failure mechanisms of PET and PLA SPCs, the SPCs were characterized using tensile test, tearing test, impact test, SEM, optical microscopy, and other methods. The change of crystallinity and orientation of the material forms during SPCs processing were characterized by DSC and XRD. The effects of major process conditions on the performance of the SPCs were studied. It was found that the processing temperature played a profound role in affecting the fiber-matrix bonding property. The compression molded SPCs exhibited enhanced mechanical properties. For the PET SPCs with 45% by weight fiber content the tensile strength is four folds of that of non-reinforced PET. After reinforcement, the tearing strength of the PLA SPCs is almost an order higher than that of the non-reinforced PLA. The fusion bonding behavior of two crystallizable amorphous PET sheets was also studied. Several characterization methods including SEM, TEM and polarized microscopy (either on etched or on non-etched samples) were used to observe interfacial bonding morphology of the crystallizable amorphous PET sheets. For a bonded sample, a layer of transcrystals with a thickness of 1-2 ©+m was found right at the interface. A secondary but much larger zone with a distinct morphology was observed outside the transcrystal layer. With increase of the heating time, the width of the whole interfacial region decreases. The interfacial morphology was found to significantly affect the interfacial bonding quality. The testing results further indicated that high bonding temperature with an appropriate holding time promotes interfacial bonding of two crystallizable amorphous PET.

Fabrication of Polymer/metal Oxide Composites Through Polymerization-induced Phase Separation and Characterization of Their Mechanical and Electrochemical Properties

Download Fabrication of Polymer/metal Oxide Composites Through Polymerization-induced Phase Separation and Characterization of Their Mechanical and Electrochemical Properties PDF Online Free

Author : Jeongwoo Lee
Publisher :
ISBN 13 :
Total Pages : 126 pages
Book Rating : 4.:/5 (13 download)

DOWNLOAD NOW!

Book Synopsis Fabrication of Polymer/metal Oxide Composites Through Polymerization-induced Phase Separation and Characterization of Their Mechanical and Electrochemical Properties by : Jeongwoo Lee

Download or read book Fabrication of Polymer/metal Oxide Composites Through Polymerization-induced Phase Separation and Characterization of Their Mechanical and Electrochemical Properties written by Jeongwoo Lee and published by . This book was released on 2015 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymerization-induced phase separation of nanoparticle-filled solution is demonstrated as a simple approach to control the structure of polymer composites. Therefore, polymer/metal oxide nanocomposites are fabricated by the polymerization-induced phase separation and the composites are characterized their mechanical and electrochemical properties. The first work was conducted on fabrication and characterization of poly(ethyl acrylate) (PEA)/poly(methyl methacrylate) (PMMA)/aluminium oxide (Al2O3) composite to confirm the effect of their morphologies on mechanical properties. The dispersion state of Al2O3 in the PEA/PMMA blend matrix has a decisive effect on mechanical properties of PEA/PMMA/Al2O3 composite materials. Since the interactions between the PEA/PMMA chains and Al2O3 nanoparticles are at work, the small-sized clusters and individual clusters of Al2O3 into the composites improve the tensile strength as compared with neat PEA/PMMA blend. On the contrary, the larger and interconnected clusters of Al2O3 bring several partial failures because of the severe modulus mismatch between polymer and Al2O3 nanoparticles. When the polymer composite materials are pyrolyzed and then carbon composite materials are obtain, the carbon composites can be used for battery electrodes. Especially, the morphology of composite materials used in battery electrodes is critical to provide the requisite transport paths for ions and electrons to enable high performance. Therefore, polymer nanocomposites are demonstrated as the active component for sodium ion battery anode. For fabrication of the composites, poly(hydroxybutyl methacrylate) (PHBMA) is dissolved in furfuryl alcohol (carbon precursor) containing a photoacid generator (PAG), and then titanium oxide (anatase, TiO2) nanoparticles are dispersed in the solution. When the PAG exposes to UV, it turns into a strong acid that catalyzes the furfuryl alcohol polymerization. Carbonization of this polymer composite yields a porous nanocomposite. This nanocomposite exhibits nearly 3-fold greater gravimetric capacity in Na-ion batteries than the same titanium oxide nanoparticles that have been coated with carbon. In addition, a simple and scalable method to tune the morphology of carbon/TiO2 composite is described using polymerization-induced phase separation of a mixture containing commercial TiO2 nanoparticles, poly(hydroxyethyl methacrylate) (PHEMA), and photoacid generator (PAG) dissolved in furfuryl alcohol (FA). The morphology is controlled by the molecular weight of PHEMA and FA concentration that impact the miscibility and mobility. The polymerized composite is carbonized to yield porous carbon/TiO2 electrodes. Electrochemical impedance spectroscopy (EIS) analysis illustrates that subtle changes in synthetic conditions can dramatically impact the electrical or ion conductance, primarily through modulation in the solid electrolyte interphase (SEI). A careful investigation of the SEI layer on the porous carbon/TiO2 composites demonstrates a clear correlation between the SEI and the surface area of the porous anode as determined by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS).

Morphology and Mechanical Properties of In-situ Fibrillated Polyethylene Based Composites

Author : Peixuan Li
Publisher :
ISBN 13 :
Total Pages : 0 pages
Book Rating : 4.:/5 (133 download)

DOWNLOAD NOW!

Book Synopsis Morphology and Mechanical Properties of In-situ Fibrillated Polyethylene Based Composites by : Peixuan Li

Download or read book Morphology and Mechanical Properties of In-situ Fibrillated Polyethylene Based Composites written by Peixuan Li and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spunbond fibrillation, an industrial scaled technology, is utilized in a wide range of applications such as medical products, textiles, and others. Here, an in-situ fibrillated method was proposed to fabricate the fiber-in-fiber polymer composite using spunbond technology. In the study, we investigated four researches: Chapter 2 explored the influence of morphology of PBT domains on the crystallization, rheological, and mechanical properties of PBT/HDPE composites; Chapter 3 investigated the effectiveness of the coupling agent on the surface compatibility between PBT and PE interfaces and its mechanical behaviour; Chapter 4 discussed the impacts of the UV curing time and the second phase content on the morphology, and mechanical behaviours of the EPDM/PE composites; and Chapter 5 studied the morphology of the E-beam cured EPDM/PE (and mPE/PE) composites. The in-situ fibrillar strengthened/ toughened composites are promising for applications such as automotive, astronomy, medical services, and consumer goods, and so on.

Polymer Composites

Author : Klaus Friedrich
Publisher : Springer Science & Business Media
ISBN 13 : 038726213X
Total Pages : 374 pages
Book Rating : 4.3/5 (872 download)

DOWNLOAD NOW!

Book Synopsis Polymer Composites by : Klaus Friedrich

Download or read book Polymer Composites written by Klaus Friedrich and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of polymer composites in various engineering applications has become state of the art. This multi-author volume provides a useful summary of updated knowledge on polymer composites in general, practically integrating experimental studies, theoretical analyses and computational modeling at different scales, i. e. , from nano- to macroscale. Detailed consideration is given to four major areas: structure and properties of polymer nanocomposites, characterization and modeling, processing and application of macrocomposites, and mechanical performance of macrocomposites. The idea to organize this volume arose from a very impressive workshop - The First International Workshop on Polymers and Composites at IVW Kaiserslautern: Invited Humboldt-Fellows and Distinguished Scientists, which was held on May 22-24,2003 at the University of Kaiserslautern, Germany. The contributing authors were invited to incorporate updated knowledge and developments into their individual chapters within a year after the workshop, which finally led to these excellent contributions. The success of this workshop was mainly sponsored by the German Alexander von Humboldt Foundation through a Sofia Kovalevskaja Award Program, financed by the Federal Ministry for Education and Research within the "Investment in the Future Program" of the German Government. In 2001, the Humboldt Foundation launched this new award program in order to offer outstanding young researchers throughout the world an opportunity to establish their own work-groups and to develop innovative research concepts virtually in Germany. One of the editors, Z.

Synthesis Techniques for Polymer Nanocomposites

Author : Vikas Mittal
Publisher : John Wiley & Sons
ISBN 13 : 3527670327
Total Pages : 317 pages
Book Rating : 4.5/5 (276 download)

DOWNLOAD NOW!

Book Synopsis Synthesis Techniques for Polymer Nanocomposites by : Vikas Mittal

Download or read book Synthesis Techniques for Polymer Nanocomposites written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2014-10-16 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series 'Polymer Nano-, Micro- and Macrocomposites' provides complete and comprehensive information on all important aspects of polymer composite research and development, including, but not limited to synthesis, filler modification, modeling, characterization as well as application and commercialization issues. Each book focuses on a particular topic and gives a balanced in-depth overview of the respective subfield of polymer composite science and its relation to industrial applications. With the books the readers obtain dedicated resources with information relevant to their research, thereby helping to save time and money. Summarizing all the most important synthesis techniques used in the lab as well as in industry, this book is comprehensive in its coverage from chemical, physical and mechanical viewpoints. This book helps readers to choose the correct synthesis route, such as suspension and miniemulsion polymerization, living polymerization, sonication, mechanical methods or the use of radiation, and so achieve the desired composite properties.

Particulate-filled Polymer Composites

Author : Roger N. Rothon
Publisher : Addison Wesley Longman
ISBN 13 :
Total Pages : 404 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!

Book Synopsis Particulate-filled Polymer Composites by : Roger N. Rothon

Download or read book Particulate-filled Polymer Composites written by Roger N. Rothon and published by Addison Wesley Longman. This book was released on 1995 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Polymer Composites with Carbonaceous Nanofillers

Author : Sie Chin Tjong
Publisher : John Wiley & Sons
ISBN 13 : 9783527410804
Total Pages : 0 pages
Book Rating : 4.4/5 (18 download)

DOWNLOAD NOW!

Book Synopsis Polymer Composites with Carbonaceous Nanofillers by : Sie Chin Tjong

Download or read book Polymer Composites with Carbonaceous Nanofillers written by Sie Chin Tjong and published by John Wiley & Sons. This book was released on 2012-10-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an expert in the field of nanomaterials, composites, and polymers, this book provides up-to-date information on recent advances in various aspects of polymer composites reinforced by carbonaceous nanofillers, including their fabrication and their electrical, thermal, and mechanical properties. It also extensively covers applications of these nanocomposites in fuel cells, sensors, electromagnetic interference shielding, human implants and scaffolds.