Fabrication And Properties Of Aluminum Carbon Nanotube Accumulative Roll Bonded Composites

Download Fabrication And Properties Of Aluminum Carbon Nanotube Accumulative Roll Bonded Composites full books in PDF, epub, and Kindle. Read online Fabrication And Properties Of Aluminum Carbon Nanotube Accumulative Roll Bonded Composites ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Carbon Nanotubes

Author : Andy Nieto
Publisher : CRC Press
ISBN 13 : 1000377504
Total Pages : 376 pages
Book Rating : 4.0/5 (3 download)

DOWNLOAD NOW!

Book Synopsis Carbon Nanotubes by : Andy Nieto

Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.

Advances in Nanostructured Composites

Author : Mahmood Aliofkhazraei
Publisher : CRC Press
ISBN 13 : 1482236648
Total Pages : 502 pages
Book Rating : 4.4/5 (822 download)

DOWNLOAD NOW!

Book Synopsis Advances in Nanostructured Composites by : Mahmood Aliofkhazraei

Download or read book Advances in Nanostructured Composites written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2019-04-30 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites and nanocomposites are used in cases where long durability and strength of components are required; i.e., where high stress levels, erosion processes and multiphase environments are present, including the parts under collision and impact, the parts under rotating motion and erosion (like excavation drills in oil and gas wells). The first volume of this book aims to provide a guide for fabrication of new nanocomposites mainly based on carbon nanotubes and graphene. The main topics of this volume are: Application of Nano-powders for Formation of Metal Matrix of Composites, Conjugated Polymer Nanocomposites, Biopolymer Nanocomposites, Dental Nanocomposites, Graphene-based Nanocomposites for Electrochemical Energy Storage, Polymer/Filler Composites for Optical Diffuse Reflectors, Synthesis and Applications of LDH-Based Nanocomposites, Rubber—CNT Nanocomposites, Nanocomposite Fibers with Carbon Nanotubes, Fabrications of Graphene Based Nanocomposites for Electrochemical Sensing of Drug Molecules, Recent Advances in Graphene Metal Oxide Based Nanocomposites.

Magnesium

Author : Manoj Gupta
Publisher : BoD – Books on Demand
ISBN 13 : 1789238412
Total Pages : 130 pages
Book Rating : 4.7/5 (892 download)

DOWNLOAD NOW!

Book Synopsis Magnesium by : Manoj Gupta

Download or read book Magnesium written by Manoj Gupta and published by BoD – Books on Demand. This book was released on 2020-02-26 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium-based materials are rapidly emerging in recent years to primarily assist in mitigating global warming and for health benefits. They are seen as materials of the future due to their lightweight, nutritional characteristics and abundance on Earth. Their applications are in a wide array of engineering and biomedical sectors, promising a multi-billion-dollar market in the very near future. The applicability of magnesium-based materials also suits the current emphasis on sustainability and a greener earth. This book was thus conceptualized and highlights important areas of current research and future directions including fundamental and applied principles related to primary and secondary processing types, microstructural evolution, machining, joining, and the past and current application scenario of magnesium-based materials.

Metal Matrix Composites

Author : Manoj Gupta
Publisher : MDPI
ISBN 13 : 3038970875
Total Pages : 294 pages
Book Rating : 4.0/5 (389 download)

DOWNLOAD NOW!

Book Synopsis Metal Matrix Composites by : Manoj Gupta

Download or read book Metal Matrix Composites written by Manoj Gupta and published by MDPI. This book was released on 2018-08-15 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Metal Matrix Composites" that was published in Metals

Advances in Materials and Metallurgy

Author : A. K. Lakshminarayanan
Publisher : Springer
ISBN 13 : 9811317801
Total Pages : 497 pages
Book Rating : 4.8/5 (113 download)

DOWNLOAD NOW!

Book Synopsis Advances in Materials and Metallurgy by : A. K. Lakshminarayanan

Download or read book Advances in Materials and Metallurgy written by A. K. Lakshminarayanan and published by Springer. This book was released on 2018-09-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM 2018), and covers topics regarding both the characterization of materials and their applications across engineering domains. It addresses standard materials such as metals, polymers and composites, as well as nano-, bio- and smart materials. In closing, the book explores energy, the environment and green processes as related to materials engineering. Given its content, it will prove valuable to a broad readership of students, researchers, and professionals alike.

Defect Structure and Properties of Nanomaterials

Author : J Gubicza
Publisher : Woodhead Publishing
ISBN 13 : 0081019181
Total Pages : 412 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!

Book Synopsis Defect Structure and Properties of Nanomaterials by : J Gubicza

Download or read book Defect Structure and Properties of Nanomaterials written by J Gubicza and published by Woodhead Publishing. This book was released on 2017-03-05 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defect Structure and Properties of Nanomaterials: Second and Extended Edition covers a wide range of nanomaterials including metals, alloys, ceramics, diamond, carbon nanotubes, and their composites. This new edition is fully revised and updated, covering important advances that have taken place in recent years. Nanostructured materials exhibit unique mechanical and physical properties compared with their coarse-grained counterparts, therefore these materials are currently a major focus in materials science. The production methods of nanomaterials affect the lattice defect structure (vacancies, dislocations, disclinations, stacking faults, twins, and grain boundaries) that has a major influence on their mechanical and physical properties. In this book, the production routes of nanomaterials are described in detail, and the relationships between the processing conditions and the resultant defect structure, as well as the defect-related properties (e.g. mechanical behavior, electrical resistance, diffusion, corrosion resistance, thermal stability, hydrogen storage capability, etc.) are reviewed. In particular, new processing methods of nanomaterials are described in the chapter dealing with the manufacturing procedures of nanostructured materials. New chapters on (i) the experimental methods for the study of lattice defects, (ii) the defect structure in nanodisperse particles, and (iii) the influence of lattice defects on electrical, corrosion, and diffusion properties are included, to further enhance what has become a leading reference for engineering, physics, and materials science audiences. - Provides a detailed overview of processing methods, defect structure, and defect-related mechanical and physical properties of nanomaterials - Covers a wide range of nanomaterials including metals, alloys, ceramics, diamond, carbon nanotubes, and their composites - Includes new chapters covering recent advances in both processing techniques and methods for the study of lattice defects - Provides valuable information that will help materials scientists and engineers highlight lattice defects and the related mechanical and physical properties

Manufacturing Techniques for Materials

Author : T.S. Srivatsan
Publisher : CRC Press
ISBN 13 : 1351597191
Total Pages : 790 pages
Book Rating : 4.3/5 (515 download)

DOWNLOAD NOW!

Book Synopsis Manufacturing Techniques for Materials by : T.S. Srivatsan

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Metal Matrix Composites

Author : Suneev Anil Bansal
Publisher : CRC Press
ISBN 13 : 1000626741
Total Pages : 267 pages
Book Rating : 4.0/5 (6 download)

DOWNLOAD NOW!

Book Synopsis Metal Matrix Composites by : Suneev Anil Bansal

Download or read book Metal Matrix Composites written by Suneev Anil Bansal and published by CRC Press. This book was released on 2022-08-23 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites (MMC) are materials that can be tailored to achieve specific properties, influenced by fabrication techniques. "Metal Matrix Composites: Fabrication, Production and 3D Printing" cover various aspects of fabrication, production and new manufacturing techniques including research and development. It includes conventional fabrication techniques and methods required to synthesize micro/nano MMCs. Multivariate approach required to optimize production including development of complex geometries is explained as well. Features: Provides in-depth information on fabrication, production, and advanced manufacturing of Metal Matrix Composites (MMCs). Details about matrix, reinforcement, and application-oriented fabrication processes. Emphasizes on advance processing methods like metal 3D printing, additive and subtractive manufacturing techniques. Provides comprehensive record of fabrication development in MMCs. Focus on materials and application-based processing techniques. This book aims at graduate students, researchers and professionals in micro/nano science and technology, mechanical engineering, industrial engineering, metallurgy, and composites.

Carbon Nanotube-Reinforced Polymers

Author : Roham Rafiee
Publisher : Elsevier
ISBN 13 : 0323482228
Total Pages : 588 pages
Book Rating : 4.3/5 (234 download)

DOWNLOAD NOW!

Book Synopsis Carbon Nanotube-Reinforced Polymers by : Roham Rafiee

Download or read book Carbon Nanotube-Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions

Recent Advances in Layered Materials and Structures

Author : Sarmila Sahoo
Publisher : Springer Nature
ISBN 13 : 9813345500
Total Pages : 431 pages
Book Rating : 4.8/5 (133 download)

DOWNLOAD NOW!

Book Synopsis Recent Advances in Layered Materials and Structures by : Sarmila Sahoo

Download or read book Recent Advances in Layered Materials and Structures written by Sarmila Sahoo and published by Springer Nature. This book was released on 2021-02-22 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides topical information on innovative, structural and functional materials and composites with applications in various engineering fields covering the structure, properties, manufacturing process, and applications of these materials. It covers various topics in layered structures and layered materials. It discusses the latest developments in the materials engineering field. This book will be useful for academicians, researchers, and practitioners working in the fields of materials engineering, layered structures, and composite materials.

Innovations in Mechanical Engineering

Author : José Machado
Publisher : Springer Nature
ISBN 13 : 3030791653
Total Pages : 486 pages
Book Rating : 4.0/5 (37 download)

DOWNLOAD NOW!

Book Synopsis Innovations in Mechanical Engineering by : José Machado

Download or read book Innovations in Mechanical Engineering written by José Machado and published by Springer Nature. This book was released on 2021-06-16 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 1st International Conference “Innovation in Engineering”, ICIE, held in Guimarães, Portugal, on June 28–30, 2021, it focuses on innovation in mechanical engineering, spanning from engineering design and testing of medical devices, evaluation of new materials and composites for different industrial applications, fatigue and stress analysis of mechanical structures, and application of new tools such as 3D printing, CAE 3D models, and decision support systems. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.

Aluminum and Magnesium Metal Matrix Nanocomposites

Author : Lorella Ceschini
Publisher : Springer
ISBN 13 : 9811026815
Total Pages : 171 pages
Book Rating : 4.8/5 (11 download)

DOWNLOAD NOW!

Book Synopsis Aluminum and Magnesium Metal Matrix Nanocomposites by : Lorella Ceschini

Download or read book Aluminum and Magnesium Metal Matrix Nanocomposites written by Lorella Ceschini and published by Springer. This book was released on 2016-10-18 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book looks into the recent advances in the ex-situ production routes and properties of aluminum and magnesium based metal matrix nanocomposites (MMNCs), produced either by liquid or semi-solid state methods. It comprehensively summarizes work done in the last 10 years including the mechanical properties of different matrix/nanoreinforcement systems. The book also addresses future research direction, steps taken and missing developments to achieve the full industrial exploitation of such composites. The content of the book appeals to researchers and industrial practitioners in the area of materials development for metal matrix nanocomposites and its applications.

Nanomaterials for Sustainable Tribology

Author : Ankush Raina
Publisher : CRC Press
ISBN 13 : 1000849376
Total Pages : 307 pages
Book Rating : 4.0/5 (8 download)

DOWNLOAD NOW!

Book Synopsis Nanomaterials for Sustainable Tribology by : Ankush Raina

Download or read book Nanomaterials for Sustainable Tribology written by Ankush Raina and published by CRC Press. This book was released on 2023-03-24 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the sustainability of nanomaterials in tribology, economic aspects of nanomaterials, mechanisms, and mathematical models in detail. Highlights the importance of tribology of green lubricants, green additives, and lightweight materials. Covers special topics such as orthopedic implants, dental tribology, biocompatible nanomaterials related to the role of nanomaterials in bio tribology. Presents interdisciplinary aspects such as sustainability, tribology of biological systems, and chemical aspects of nanomaterials. Explains research advancement and recent trends such as green additives, nano greases, nanocomposite tribology, and the concept of green tribology with respect to nanotechnology.

Magnesium Technology 2014

Author : Martyn Alderman
Publisher : Springer
ISBN 13 : 3319482319
Total Pages : 502 pages
Book Rating : 4.3/5 (194 download)

DOWNLOAD NOW!

Book Synopsis Magnesium Technology 2014 by : Martyn Alderman

Download or read book Magnesium Technology 2014 written by Martyn Alderman and published by Springer. This book was released on 2016-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers in this collection represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. This volume covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications in such areas as hydrogen storage.

Introduction to Nanofiber Materials

Author : Frank K. Ko
Publisher : Cambridge University Press
ISBN 13 : 1139991728
Total Pages : 281 pages
Book Rating : 4.1/5 (399 download)

DOWNLOAD NOW!

Book Synopsis Introduction to Nanofiber Materials by : Frank K. Ko

Download or read book Introduction to Nanofiber Materials written by Frank K. Ko and published by Cambridge University Press. This book was released on 2014-07-31 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the latest coverage of the fundamentals and applications of nanofibrous materials and their structures for graduate students and researchers, this book bridges the communication gap between fiber technologists and materials scientists and engineers. Featuring intensive coverage of electroactive, bioactive and structural nanofibers, it provides a comprehensive collection of processing conditions for electrospinning and includes recent advances in nanoparticle-/nanotube-based nanofibers. The book also covers mechanical properties of fibers and fibrous assemblies, as well as characterization methods.

Unconventional Techniques for the Production of Light Alloys and Composites

Author : Jose Martin Herrera Ramirez
Publisher : Springer Nature
ISBN 13 : 3030481220
Total Pages : 215 pages
Book Rating : 4.0/5 (34 download)

DOWNLOAD NOW!

Book Synopsis Unconventional Techniques for the Production of Light Alloys and Composites by : Jose Martin Herrera Ramirez

Download or read book Unconventional Techniques for the Production of Light Alloys and Composites written by Jose Martin Herrera Ramirez and published by Springer Nature. This book was released on 2020-06-22 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses methods used in the synthesis of light alloys and composites for industrial applications. It begins with a broad introduction to virtually all aspects of the technology of light alloys and composite materials for aircraft and aerospace applications. The basic theory of fiber and particle reinforcements; light metallic material characteristics and composite systems; components forms, and manufacturing techniques and processes are discussed. The book then progresses to describe the production of alloys and composites by unconventional techniques, such as powder metallurgy, sandwich technique, severe plastic deformation, additive manufacturing, and thermal spray, making it appropriate for researchers in both academia and industry. It will be of special interest to aerospace engineers. Provides a broad introduction to the technology used in manufacturing light alloys and composite materials; Describes the current technologies employed in synthesizing light alloys made from advanced materials; Focuses on unconventional techniques used to produce light alloys and composites in aerospace applications.

Handbook of Non-Ferrous Metal Powders

Author : Oleg D Neikov
Publisher : Elsevier
ISBN 13 : 0081005474
Total Pages : 998 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!

Book Synopsis Handbook of Non-Ferrous Metal Powders by : Oleg D Neikov

Download or read book Handbook of Non-Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2018-11-30 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Non-Ferrous Metal Powders: Technologies and Applications, Second Edition, provides information on the manufacture and use of powders of non-ferrous metals that has taken place for many years in the area previously known as Soviet Russia. It presents the huge amount of knowledge and experience that has built up over the last fifty years. Originally published in Russia by several prominent scientists, researchers and engineers, this presents an update to the first book that includes sections on classification, properties, treatment methods and production. This updated edition contains new content on the powders, along with newer methods of 3D printing. - Covers the manufacturing methods, properties and importance of the following metals: aluminum, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Includes new content on recent advances, such as additive manufacturing and 3D printing of non-ferrous metal alloys and specific powders for advanced techniques, including metal injection molding technologies - Expands on topics such as safety engineering in the production of powders and advanced areas of engineering research, such as nanopowder processes