Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Energy Efficiency In Manufacturing Facilities Assessment Analysis And Implementation
Download Energy Efficiency In Manufacturing Facilities Assessment Analysis And Implementation full books in PDF, epub, and Kindle. Read online Energy Efficiency In Manufacturing Facilities Assessment Analysis And Implementation ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Energy Efficiency in Manufacturing Facilities: Assessment, Analysis and Implementation by : Gary P. Moynihan
Download or read book Energy Efficiency in Manufacturing Facilities: Assessment, Analysis and Implementation written by Gary P. Moynihan and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing facilities are one among the largest consumers of energy. Efforts to improve energy efficiency are an increasing concern for many manufacturing facility engineering managers. This can be achieved by evaluating energy end uses (e.g., lighting, processing equipment, and heating, air conditioning, and ventilation (HVAC) systems), and by implementing measures to reduce the total amount of energy consumed for one or more of the end uses. Throughout the 40 years of its existence, the US Department of Energy's Industrial Assessment Center program has developed an array of techniques to improve energy efficiency in industrial facilities. This chapter discusses recommended assessment procedures and observed energy-saving opportunities for some of the most common industrial energy systems. These systems include lighting, compressed air, boilers and steam systems, manufacturing process heating, HVAC, pumps, and fans. Implementation of these assessment recommendations has been demonstrated to increase efficiency and to thus reduce energy consumption and associated costs. While every manufacturing facility is different, and their component industrial energy systems equally unique, this chapter presents a set of analytical guidelines that can be used as a template by engineering practitioners to evaluate their facility energy use and implement subsequent energy conservation measures.
Book Synopsis Improving Energy Efficiency at U.S. Plastics Manufacturing Plants by :
Download or read book Improving Energy Efficiency at U.S. Plastics Manufacturing Plants written by and published by . This book was released on 2005 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Energy Efficiency in Manufacturing Systems by : Sebastian Thiede
Download or read book Energy Efficiency in Manufacturing Systems written by Sebastian Thiede and published by Springer Science & Business Media. This book was released on 2012-04-23 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy consumption is of great interest to manufacturing companies. Beyond considering individual processes and machines, the perspective on process chains and factories as a whole holds major potentials for energy efficiency improvements. To exploit these potentials, dynamic interactions of different processes as well as auxiliary equipment (e.g. compressed air generation) need to be taken into account. In addition, planning and controlling manufacturing systems require balancing technical, economic and environmental objectives. Therefore, an innovative and comprehensive methodology – with a generic energy flow-oriented manufacturing simulation environment as a core element – is developed and embedded into a step-by-step application cycle. The concept is applied in its entirety to a wide range of case studies such as aluminium die casting, weaving mills, and printed circuit board assembly in order to demonstrate the broad applicability and the benefits that can be achieved.
Book Synopsis Energy Efficiency and Conservation in Metal Industries by : Swapan Kumar Dutta
Download or read book Energy Efficiency and Conservation in Metal Industries written by Swapan Kumar Dutta and published by CRC Press. This book was released on 2022-07-19 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a deep insight into the energy usage in the energy intensive metal industry and the methodology for efficiency assessment. Various methodologies for energy audits are described, along with concept-level analysis for minimum energy design. Apart from the technical and engineering analysis, the book also describes management aspects such as energy management systems and financial, environmental and social analysis leading to the development of a comprehensive plan for implementation of energy efficiency and conservation in industries. Barriers to investment in energy efficiency and conservation are discussed, based on review of global and Indian case studies. FEATURES: Details fundamental principles driving energy consumption in an industrial set-up backed with illustrative examples Explains various alternative methods for discovery of energy efficiency and conservation projects. Focusses on metal-producing and -processing facilities with an emphasis on environmental quality Supports maximum digitalization of energy audit assessment and report preparation processes Includes global case studies and tutorials at the end of the corresponding chapters This book is useful for researchers, professionals and graduate students in thermodynamics, manufacturing, thermal engineering, energy engineering, energy efficiency and energy processes, especially in the metal industry.
Book Synopsis Analysis of Energy-efficiency Investment Decisions by Small and Medium-sized Manufacturers by :
Download or read book Analysis of Energy-efficiency Investment Decisions by Small and Medium-sized Manufacturers written by and published by . This book was released on 1996 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report highlights the results of a comprehensive analysis of investment decisions regarding energy-efficiency measures at small and medium-sized manufacturing plants. The analysis is based on the experiences of companies participating in the DOE Industrial Assessment Center (IAC) program. The IAC program is a network of university-based centers that provides energy and waste assessments to small and medium-sized manufacturing plants. The purposes of this report are to do the following: (1) Examine what the data collected reveal about patterns of implementation of recommended energy- efficiency measures, (2) Evaluate how various factors, such as the type of industry, the characteristics of the manufacturing plants, or the cost of the measures, appear to effect implementation rates, (3) Examine reasons why recommended energy-saving measures are accepted or rejected.
Book Synopsis Energy Efficient Buildings by : Eng Hwa Yap
Download or read book Energy Efficient Buildings written by Eng Hwa Yap and published by BoD – Books on Demand. This book was released on 2017-01-18 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses energy efficient buildings and the role they play in our efforts to address climate change, energy consumption and greenhouse gas emissions by considering buildings and the construction sector's unique position along a critical path to decarbonisation from a multi-perspective and holistic viewpoint. Topics covered in the book range from daylighting, building topology comparison, building envelope design, zero energy homes in hot arid regions, life-cycle considerations and energy efficiency analysis to managing energy demand through equipment selection. Each chapter addresses an important aspect of energy efficient building and serves as a vital building block towards constructing a timely and relevant body of knowledge in energy efficient buildings.
Book Synopsis Energy Use Efficiency by : Almas Heshmati
Download or read book Energy Use Efficiency written by Almas Heshmati and published by MDPI. This book was released on 2021-04-14 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy is one of the most important factors of production. Its efficient use is crucial for ensuring production and environmental quality. Unlike normal goods with supply management, energy is demand managed. Efficient energy use—or energy efficiency—aims to reduce the amount of energy required to provide products and services. Energy use efficiency can be achieved in situations such as housing, offices, industrial production, transport and agriculture as well as in public lighting and services. The use of energy can be reduced by using technology that is energy saving. This Special Issue is a collection of research on energy use efficiency.
Book Synopsis Energy Efficiency of Manufacturing Processes and Systems by : Konstantinos Salonitis
Download or read book Energy Efficiency of Manufacturing Processes and Systems written by Konstantinos Salonitis and published by MDPI. This book was released on 2020-11-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue addresses the important issue of the energy efficiency of both manufacturing processes and systems. Manufacturing is responsible for one-third of global energy consumption and CO2 emissions. Thus, improving the energy efficiency of production has been the focus of research in recent years. Energy efficiency has begun to be considered as one of the key decision-making attributes for manufacturing. This book includes recent studies on methods for the measurement of energy efficiency, tools and techniques for the analysis and development of improvements with regards to energy consumption, modeling and simulation of energy efficiency, and the integration of green and lean manufacturing. This book presents a breadth of relevant information, material, and knowledge to support research, policy-making, practices, and experience transferability to address the issues of energy efficiency.
Book Synopsis Final Technical Report for Industrial Assessment Center at West Virginia University by :
Download or read book Final Technical Report for Industrial Assessment Center at West Virginia University written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Assessment Center (IAC) program at West Virginia University (WVU), which is funded by the Industrial Technologies Program (ITP) in the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy (EERE), has provided a unique opportunity to enhance efficient energy utilization in small to medium-sized manufacturers. It has also provided training to engineering students in the identification and analysis of efficient energy use in each aspect of the manufacturing process and associated supporting elements. The outcomes of the IAC Program at WVU have assisted the manufacturers and the students in having a heightened sensitivity to industrial energy conservation, waste reduction, and productivity improvement, as well as a better understanding of the technical aspects of manufacturing processes and the supporting elements through which efficient energy utilization can be enhanced. The IAC at WVU has conducted 101 energy assessments from 2002 until 2006. The focus of the industrial assessments has been on energy savings. It has been the IAC's interest to strongly focus on energy savings and on waste minimization and productivity improvements that strictly have an impact on energy. The IAC at WVU was selected as the Center of the year in 2005 from amongst 26 centers and has obtained a ranking within the top 5 in the previous few years. From 2002 to 2006, the total recommended energy savings produced by the IAC at WVU is 1,214,414 MMBtu, of which the electricity accounts for 93,826,067 kWh (equivalent to 320,226 MMBtu) and natural gas for 871,743 MMBtu. The balance is accounted for in savings in other fuels, mainly coal and wood. This results in an average recommended energy savings of 928,971 kWh from electricity and 8,631 MMBtu from natural gas per facility. The total CO2 emissions saved from 2002 to 2006 is 154,462 tons, with an average of 1,529.3 tons per facility. The average recommended energy cost savings per facility is $135,036. The overall implementation rate of the assessment recommendations is 60.6% for the 101 industrial assessments conducted since 2002. The implemented recommendations resulted in total energy savings of 62,328,006 kWh from electricity, 295,241 MMBtu from natural gas, and 43,593 MMBtu from other fuels, totaling 551,557 MMBtu. The average implemented energy savings per industrial facility is 5,461 MMBtu and the average implemented energy cost savings is $ 59,879. The average implemented energy and productivity cost savings exceeds the program average of $ 60,000 per assessment. The IAC at WVU has produced a variety of energy efficiency recommendations in areas of industrial energy consumption such as Boilers and Steam systems (19), Air Compressors (15), HVAC (4), Chillers (12), Furnaces and Ovens (17), Motors (8), Lighting (20), Insulation (3), CHP and Cogeneration (4), and Process Equipment (7). The project has benefited the public by enabling the reduction of CO2 emissions by 89,726 tons due to the implemented energy saving recommendations at 101 small and medium sized manufacturing facilities. Since CO2 is a green house gas, its reduction will improve the quality of the environment significantly. The reduction in operating costs for the manufacturing facilities in terms of energy cost savings will increase the manufacturing facilities' profits and improve their competitive edge, thus causing possible expansion in the manufacturing activities, leading to increase in good paying jobs.
Book Synopsis Decreasing Energy Intensity in Manufacturing by : National Research Council
Download or read book Decreasing Energy Intensity in Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2005-05-04 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE) has supported the Industrial Technologies Program (ITP) for more than a decade. This program supports R&D into energy efficiency technologies designed to decrease the energy intensity of the U.S. industrial sector. The focus in on seven energy-intensive industriesâ€"aluminum, chemicals, forest products, glass, metal casting, mining, and steelâ€"known as the Industries of the Future (IOF). DOE asked the NRC for a review of this program including an evaluation of the ITP strategic plan, an evaluation of the technical quality of individual subprogram plans, and the prospective value of the multi-year program plan. This report presents the results of that review. It contains an assessment of the ITP strategy, of how effective it is being implemented, and the likelihood of achieving program goals. It also provides conclusions about the quality of the subprograms and recommendations about how to strengthen the subprograms and the overall program.
Book Synopsis Energy Management and Energy Efficiency in Industry by : Durmuş Kaya
Download or read book Energy Management and Energy Efficiency in Industry written by Durmuş Kaya and published by Springer Nature. This book was released on 2021-06-21 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is presented to demonstrate how energy efficiency can be achieved in existing systems or in the design of a new system, as well as a guide for energy savings opportunities. Accordingly, the content of the book has been enriched with many examples applied in the industry. Thus, it is aimed to provide energy savings by successfully managing the energy in the readers’ own businesses. The authors primarily present the necessary measurement techniques and measurement tools to be used for energy saving, as well as how to evaluate the methods that can be used for improvements in systems. The book also provides information on how to calculate the investments to be made for these necessary improvements and the payback periods. The book covers topics such as: • Reducing unit production costs by ensuring the reduction of energy costs, • Efficient and quality energy use, • Meeting market needs while maintaining competitive conditions, • Ensuring the protection of the environment by reducing CO2 and CO emissions with energy saving and energy efficiency, • Ensuring the correct usage of systems by carrying out energy audits. In summary, this book explains how to effectively design energy systems and manage energy to increase energy savings. In addition, the study has been strengthened by giving some case studies and their results in the fields of intensive energy consumption in industry. This book is an ideal resource for practitioners, engineers, researchers, academics, employees and investors in the fields of energy, energy management, energy efficiency and energy saving.
Book Synopsis A Method to Identify Energy Efficiency Measures for Factory Systems Based on Qualitative Modeling by : Manuela Krones
Download or read book A Method to Identify Energy Efficiency Measures for Factory Systems Based on Qualitative Modeling written by Manuela Krones and published by Springer. This book was released on 2017-05-11 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manuela Krones develops a method that supports factory planners in generating energy-efficient planning solutions. The method provides qualitative description concepts for factory planning tasks and energy efficiency knowledge as well as an algorithm-based linkage between these measures and the respective planning tasks. Its application is guided by a procedure model which allows a general applicability in the manufacturing sector. The results contain energy efficiency measures that are suitable for a specific planning task and reveal the roles of various actors for the measures’ implementation.
Book Synopsis Energy Efficient Manufacturing by : John W. Sutherland
Download or read book Energy Efficient Manufacturing written by John W. Sutherland and published by John Wiley & Sons. This book was released on 2018-08-14 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.
Book Synopsis An Analysis of Buildings-related Energy Use in Manufacturing by : M. J. Niefer
Download or read book An Analysis of Buildings-related Energy Use in Manufacturing written by M. J. Niefer and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis The DOE S In-Plant Training (INPLT) Model to Promote Energy Efficiency in the Industrial Sector by :
Download or read book The DOE S In-Plant Training (INPLT) Model to Promote Energy Efficiency in the Industrial Sector written by and published by . This book was released on 2013 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-Plant Training (INPLT) is a new model for developing energy efficiency expertise within the US manufacturing companies participating in the U.S. Department of Energy s (DOE s) Better Buildings, Better Plants Program-a nationwide initiative to drive a 25% reduction in industrial energy intensity in 10 years. INPLTs are designed to fill a market niche by providing hands on training in a real world manufacturing plant environment. Through INPLTs, participants from multiple manufacturing plants, supply chains, utilities, and other external stakeholders learn how to conduct energy assessments, use energy analysis tools to analyze energy saving opportunities, develop energy management systems, and implement energy savings projects. Typical INPLT events are led by DOE-certified Energy Experts and range from 2-4 days. Topics discussed include: identification of cross-cutting or system specific opportunities; introduction to ISO 50001 Energy Management Systems; and energy project implementation and replication. This model is flexible, and can be tailored to suit the needs of specific industries. The INPLTs are a significant departure from the traditional single plant energy assessment model previously employed by DOE. INPLTs shift the focus from the concept of a single-plant s energy profile to a broader focus on training and capacity building among multiple industrial participants. The objective is to enable trainees to identify, quantify, implement and replicate future energy saving projects without continued external assistance. This paper discusses the INPLT model and highlights some of the initial outcomes from the successfully delivered INPLTs and the overall impact in terms of numbers of plants/participants trained, impacted energy footprints, and potential replication of identified opportunities.
Book Synopsis Energy Efficiency in Industry by : Markus Blesl
Download or read book Energy Efficiency in Industry written by Markus Blesl and published by Springer Nature. This book was released on 2022-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book quantifies the potential for greater energy efficiency in industry on the basis of technology- and sector-related analyses. Starting from the methodological fundamentals, the first part discusses the electricity- and heat-based basic technologies and cross-sectional processes on the basis of numerous application examples. In addition to classic topics such as lighting and heat recovery, the study also covers processes that have received less attention to date, such as drying and painting. The second part is devoted to energy-intensive industries, in particular metal production and processing, the manufacture of the non-metallic materials cement and glass, and the chemical, paper, plastics and food industries. Both parts are concluded by placing them in a larger energy and economic context. The findings are condensed into checklists at many points and summarized in the overall view at the end to form generally applicable recommendations. This book is a translation of the original German 2nd edition Energieeffizienz in der Industrie by Markus Blesl and Alois Kessler, published by Springer-Verlag GmbH Germany, part of Springer Nature in 2017. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content, so that the book will read stylistically differently from a conventional translation. Springer Nature works continuously to further the development of tools for the production of books and on the related technologies to support the authors.
Book Synopsis Analysis of Energy Efficiency of Industrial Processes by : Vladimir S. Stepanov
Download or read book Analysis of Energy Efficiency of Industrial Processes written by Vladimir S. Stepanov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is universally recognized that the end of the current and the beginning of the next century will be characterized by a radical change in the existing trends in the economic development of all countries and a transition to new principles of economic management on the basis of a resource and energy conservation policy. Thus there is an urgent necessity to study methods, technical aids and economic consequences of this change, and particularly, to determine the possible amounts of energy resources which could be conserved (energy "reserves") in different spheres of the national economy. An increased interest towards energy conservation in industry, one of the largest energy consumers, is quite natural and is manifested by the large num ber of publications on this topic. But the majority of publications are devoted to the solution of narrowly defined problems, determination of energy reserves in specific processes and plants, efficiency estimation of individual energy conserva tion measures, etc. However, it is necessary to develop a general methodological approach to the solution of such problems and create a scientific and methodical base for realizing an energy conservation policy. Such an effort is made in this book, which is concerned with methods for studying energy use efficiency in technological processes and estimation of the theoretical and actual energy reserves in a given process, technology, or industrial sector on the basis of their complete energy balances.
