Electrochemical And X Ray Photoelectron Spectroscopic Studies Of Uo 2 Fuel Dissolution

Author : Mayuri Razdan
Publisher :
ISBN 13 :
Total Pages : 574 pages
Book Rating : 4.:/5 (16 download)

DOWNLOAD NOW!

Download or read book Electrochemical and Surface Compositional Studies on Uranium Dioxide written by Mayuri Razdan and published by . This book was released on 2013 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes electrochemical and surface compositional studies performed on a number of simulated nuclear fuel (SIMFUEL) materials under conditions relevant to permanent disposal of spent nuclear fuel in a geologic repository. This is important since a number of critical issues have been identified in the event of waste container failure. The research performed was mainly focused in three areas: (i) the influence of low pH on the surface chemistry of UO2, since acidity could develop within corrosion product deposits and flaws in the fuel; (ii) the combined influence of dissolved H2 and H2O2 (H2 and H2O2 are key reducing and oxidizing agents) in the presence of HCO32-/ CO32- (the key ground water species) on the fuel corrosion process (iii) the influence of rare earth (REIII) fission product doping on the fuel corrosion process (since matrix doping process with REIII influences the fuel bulk properties, it is expected to influence both anodic and cathodic kinetics under natural corrosion conditions). The influence of H2O2 on 1.5 at% SIMFUEL in acidic (pH 1-4) conditions was studied voltammetrically using a rotating disk electrode (RDE), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) to determine the composition and morphology of the oxidized UO2 surface. The H2O2 reduction mechanism is shown to occur on either a UV-containing surface layer of composition UIV1−2xUV2xO2+x or on an adsorbed UV surface intermediate, depending on the surface composition which is determined by solution pH and H2O2 concentration. The UIV1−2xUV2xO2+x catalytic surface lattice layer, if formed is more stable and supports H2O2 reduction up to the diffusion-controlled limit. By contrast, the UV adsorbed surface intermediate is unstable which prevents significant H2O2 reduction. The simultaneous occurrence of both reduction mechanisms demonstrates the influence of locally established surface compositions and the switch from one to the other appears to be controlled by the diffusive transport conditions at the electrode surface. In addition to H2O2, the influence of the dominant reducing species, H2, anticipated inside a failed waste container was investigated at different [H2O2] in the presence of the key ground water species (HCO3-/CO32-). Their combined influence on the redox behavior of UO2 was followed using open circuit corrosion potential measurements (ECORR), cathodic stripping voltammetry (CSV) and XPS. The presence of HCO3-/CO32- in solution inhibits UO2 oxidation at lower [H2O2]. The influence of dissolved H2 in suppressing surface oxidation under ambient conditions depends primarily on chemically added [H2O2] and was evident in the presence of carbonate for H2O2 concentrations ≤ 10-5 mol L-1. A second goal of the thesis was to study the effect of fission products (metallic particles and rare earth (RE3+)) on UO2 oxidation. These studies were conducted on 0.3 wt% Yttrium-doped UO2 (Y-UO2), 6 wt% Gadolinium doped UO2 (Gd-UO2), 12.9 wt% Dysprosium doped UO2 (Dy-UO2) and 1 wt% Palladium-doped UO2 (Pd-UO2) electrodes. The electrodes were characterized using Raman Spectroscopy and SEM/EDX and their anodic oxidation studied electrochemically and by XPS. Voltammetric experiments on Y-doped UO2 electrodes containing noble metal particles showed the presence of a current at sub-thermodynamic potentials consistent with a lattice containing a mixture of stoichiometric and non-stoichiometric domains. Their presence was verified by Raman and XPS analyses. Electrochemical investigations on homogeneously REIII doped electrodes demonstrated a clear doping influence on both stages of the anodic oxidation process; i.e., on the initial matrix oxidization step (UO2 → UO2+x) and on its further oxidation to soluble UVI (as UO22+). Doping appears to influence the kinetics of the second step more than that of first step. Raman spectroscopy shows that an increase in doping level leads to the formation of REIII-Oxygen vacancy (OV) clusters which decreases the number of the OV sites required for oxidation. The influence of carbonate/bicarbonate (the key groundwater constituents likely to influence fuel dissolution) on the electrochemical oxidation process of RE-doped UO2 (Gd-UO2) was examined using CV, potentiostatic polarization and XPS. While CV scans show that carbonate has a significant catalytic effect on the oxidative dissolution of UO2, a stable surface layer (UO2+x) is present irrespective of carbonate concentration. Potentiostatic experiments in the potential range -0.5 to 0.5V also show that the oxidation/dissolution currents are increased in the presence of carbonate. XPS analyses showed the electrode to be free of UVI species. This indicates that the slow step in the overall anodic dissolution process is the electrochemical formation of UVI not its chemical dissolution.