Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Design Of A Standing Wave Multi Cavity Beam Monitor For Simultaneous Beam Position And Emittance Measurements
Download Design Of A Standing Wave Multi Cavity Beam Monitor For Simultaneous Beam Position And Emittance Measurements full books in PDF, epub, and Kindle. Read online Design Of A Standing Wave Multi Cavity Beam Monitor For Simultaneous Beam Position And Emittance Measurements ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Design of a Standing-Wave Multi-Cavity Beam-Monitor for Simultaneous Beam Position and Emittance Measurements by : R. Miller
Download or read book Design of a Standing-Wave Multi-Cavity Beam-Monitor for Simultaneous Beam Position and Emittance Measurements written by R. Miller and published by . This book was released on 2005 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: A high precision emittance measurement requires precise beam position at the measurement location. At present there is no existing technique, commercial or otherwise, for non-destructive pulse-to-pulse simultaneous beam position and emittance measurement. FARTECH, Inc. is currently developing a high precision cavity-based beam monitor for simultaneous beam position and emittance measurements pulse-to-pulse, without beam interception and without moving parts. The design and analysis of a multi-cavity standing wave structure for a pulse-to-pulse emittance measurement system in which the quadrupole and the dipole standing wave modes resonate at harmonics of the beam operating frequency is presented. Considering the Next Linear Collider beams, an optimized 9-cavity standing wave system is designed for simultaneous high precision beam position and emittance measurements. It operates with the {pi}-quadrupole mode resonating at 16th harmonic of the NLC bunch frequency, and the 3 {pi}/4 dipole mode at 12th harmonic (8.568 GHz). The 9-cavity system design indicates that the two dipoles resonate almost at the same frequency 8.583 GHz and the quadrupole at 11.427 GHz according to the scattering parameter calculations. The design can be trivially scaled so that the dipole frequency is at 8.568 GHz, and the quadrupole frequency can then be tuned during fabrication to achieve the desired 11.424 GHz. The output powers from these modes are estimated for the NLC beams. An estimated rms-beam size resolution is sub micro-meters and beam positions in sub nano-meters.
Book Synopsis Advanced Accelerator Concepts by : Vitaly Yakimenko
Download or read book Advanced Accelerator Concepts written by Vitaly Yakimenko and published by American Institute of Physics. This book was released on 2004-12-14 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings cover new developments for a number of the most advanced methods for acceleration of heavy ions, protons, electrons and positrons.
Book Synopsis High-Precision Resonant Cavity Beam Position, Emittance And Third-Moment Monitors by : R. H. Miller
Download or read book High-Precision Resonant Cavity Beam Position, Emittance And Third-Moment Monitors written by R. H. Miller and published by . This book was released on 2006 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear colliders and FEL facilities need fast, nondestructive beam position and profile monitors to facilitate machine tune-up, and for use with feedback control. FAR-TECH, Inc., in collaboration with SLAC, is developing a resonant cavity diagnostic to simultaneously measure the dipole, quadrupole and sextupole moments of the beam distribution. Measurements of dipole and quadrupole moments at multiple locations yield information about beam orbit and emittance. The sextupole moment can reveal information about beam asymmetry which is useful in diagnosing beam tail deflections caused by short-range dipole wakefields. In addition to the resonance enhancement of a single-cell cavity, use of a multi-cell standing-wave structure further enhances signal strength and improves the resolution of the device. An estimated resolution is better than 1 {micro}m in rms beam size and better than 1 nm in beam position.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1973 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1970 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis A RESONANT CAVITY FOR SINGLE-SHOT EMITTANCE MEASUREMENT. by :
Download or read book A RESONANT CAVITY FOR SINGLE-SHOT EMITTANCE MEASUREMENT. written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We present a non-invasive, resonant cavity based approach to beam emittance measurement of a shot-to-shot non-circular beam pulse of multi-bunches. In a resonant cavity, desired field components can be enhanced up to Q[sub L[lambda]]/[pi], where Q[sub L[lambda]] is the loaded Q of the resonance mode[lambda], when the cavity resonant mode matches with the beam operating frequency. In particular, a Quad-cavity, with its quadrupole mode at beam operating frequency, extracts the beam quad-moment exclusively, utilizing the symmetry of the cavity and some simple networks to suppress common modes. Six successive beam quadrupole moment measurements, performed at different betatron phases in a linear transport system, allow us to determine the beam emittance, i.e., the beam size and shape in the beam's phase space. One measurement alone provides the rms-beam size if the beam position is given, for instance, by nearby beam-position-monitors. This paper describes the basic design and analysis of a Quad-cavity beam monitoring system.
Book Synopsis Resolution of a High Performance Cavity Beam Position Monitor System by :
Download or read book Resolution of a High Performance Cavity Beam Position Monitor System written by and published by . This book was released on 2005 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Linear Collider (ILC) interaction region beam sizes and component position stability requirements will be as small as a few nanometers. It is important to the ILC design effort to demonstrate that these tolerances can be achieved - ideally using beam-based stability measurements. It has been estimated that RF cavity beam position monitors (BPMs) could provide position measurement resolutions of less than one nanometer and could form the basis of the desired beam-based stability measurement. We have developed a high resolution RF cavity BPM system. A triplet of these BPMs has been installed in the extraction line of the KEK Accelerator Test Facility (ATF) for testing with its ultra-low emittance beam. A metrology system for the three BPMs was recently installed. This system employed optical encoders to measure each BPM's position and orientation relative to a zero-coefficient of thermal expansion carbon fiber frame and has demonstrated that the three BPMs behave as a rigid-body to less than 5 nm. To date, we have demonstrated a BPM resolution of less than 20 nm over a dynamic range of +/- 20 microns.
Book Synopsis Performance of a High Resolution Cavity Beam Position Monitor System by :
Download or read book Performance of a High Resolution Cavity Beam Position Monitor System written by and published by . This book was released on 2007 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been estimated that an RF cavity Beam Position Monitor (BPM) could provide a position measurement resolution of less than one nanometer. We have developed a high resolution cavity BPM and associated electronics. A triplet comprised of these BPMs was installed in the extraction line of the Accelerator Test Facility (ATF) at the High Energy Accelerator Research Organization (KEK) for testing with its ultra-low emittance beam. The three BPMs were each rigidly mounted inside an alignment frame on six variable-length struts which could be used to move the BPMs in position and angle. We have developed novel methods for extracting the position and tilt information from the BPM signals including a robust calibration algorithm which is immune to beam jitter. To date, we have demonstrated a position resolution of 15.6 nm and a tilt resolution of 2.1 [mu]rad over a dynamic range of approximately ± 20 [mu]m.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 1470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis A Resonant Cavity Approach to Non-Invasive, Pulse-to-Pulse EmittanceMeasurement by :
Download or read book A Resonant Cavity Approach to Non-Invasive, Pulse-to-Pulse EmittanceMeasurement written by and published by . This book was released on 2010 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: We present a resonant cavity approach for non-invasive, pulse-to-pulse, beam emittance measurements of non-circular multi-bunch beams. In a resonant cavity, desired field components can be enhanced up to Q{sub L[lambda]}/[pi], where Q{sub L{lambda}} is the loaded quality factor of the resonant mode {lambda}, when the cavity resonant mode matches the bunch frequency of a bunch-train beam pulse. In particular, a quad-cavity, with its quadrupole mode (TM220 for rectangular cavities) at beam operating frequency, rotated 45{sup o} with respect to the beamline, extracts the beam quadrupole moment exclusively, utilizing the symmetry of the cavity and some simple networks to suppress common modes. Six successive beam quadrupole moment measurements, performed at different betatron phases in a linear transport system determine the beam emittance, i.e. the beam size and shape in the beam's phase space, if the beam current and position at these points are known. In the presence of x-y beam coupling, ten measurements are required. One measurement alone provides the rms-beam size of a large aspect ratio beam. The resolution for such a measurement of rms-beam size with the rectangular quad-cavity monitor presented in this article is estimated to be on the order of ten microns. A prototype quad-cavity was fabricated and preliminary beam tests were performed at the Next Linear Collider Test Accelerator (NLCTA) at the Stanford Linear Accelerator Center (SLAC). Results were mainly limited by beam jitter and uncertainty in the beam position measurement at the cavity location. This motivated the development of a position-emittance integrated monitor.
Book Synopsis Digital Beam Position Monitor for the Happex Experiment by : J. Musson
Download or read book Digital Beam Position Monitor for the Happex Experiment written by J. Musson and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed HAPPEX experiment at CEBAF employs a three cavity monitor system for high-precision (1 mm), high-bandwidth (100 kHz) position measurements. This is performed using a cavity triplet consisting of two TM110-mode cavities (one each for X and Y planes) combined with a conventional TM-010-mode cavity for a phase and magnitude reference. Traditional systems have used the TM010 cavity output to directly down convert the BPM cavity signals to base band. The Multi-channel HAPPEX digital receiver simultaneously I/Q samples each cavity and extracts position using a CORDIC algorithm. The hardware design consists of a digital receiver daughter board and digital processor motherboard that resides in a VXI crate. The daughter board down converts 1.497 GHz signals from the TM010 cavity and X and Y signals from the TM110 cavities to 4 MHz, and extracts the quadrature digital signals. The motherboard processes this data and computes beam intensity and X-Y positions with a resolution of one mm, 100 kHz output bandwidth, and overall latency of ten microseconds. The results are available in both analog and digital format.
Book Synopsis Characterization of Beam Position Monitors for Measurement of Second Moment by :
Download or read book Characterization of Beam Position Monitors for Measurement of Second Moment written by and published by . This book was released on 1995 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: A dual-axis beam position monitor (BPM) consists of four electrodes placed at 90° intervals around the probe aperture. The response signals of these lobes can be expressed as a sum of moments. The first order moment gives the centroid of the beam. The second order moment contains information about the rms size of the beam. It has been shown previously that the second order moment can be used to determine beam emittance. To make this measurement, the authors must characterize the BPM appropriately. The approach to this problem is to use a pulsed wire test fixture. By using the principle of superposition, they can build up a diffuse beam by taking the signals from different wire positions and summing them. This is done two ways: first by physically moving a wire about the aperture and building individual distributions, and, second, by taking a two dimensional grid of wire positions versus signal and using a computer to interpolate between the grid points to get arbitrary wire positions and, therefore, distributions. The authors present the current results of this effort.
Book Synopsis Resolution of a High Performance Cavity Beam Positron Monitor System by :
Download or read book Resolution of a High Performance Cavity Beam Positron Monitor System written by and published by . This book was released on 2007 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Linear Collider (ILC) interaction region beam sizes and component position stability requirements will be as small as a few nanometers. It is important to the ILC design effort to demonstrate that these tolerances can be achieved--ideally using beam-based stability measurements. It has been estimated that RF cavity beam position monitors (BPMs) could provide position measurement resolutions of less than one nanometer and could form the basis of the desired beam-based stability measurement. We have developed a high resolution RF cavity BPM system. A triplet of these BPMs has been installed in the extraction line of the KEK Accelerator Test Facility (ATF) for testing with its ultra-low emittance beam. A metrology system for the three BPMs was recently installed. This system employed optical encoders to measure each BPM's position and orientation relative to a zero-coefficient of thermal expansion carbon fiber frame and has demonstrated that the three BPMs behave as a rigid-body to less than 5 nm. To date, we have demonstrated a BPM resolution of less than 20 nm over a dynamic range of +/- 20 microns.
Book Synopsis Digital Beam Position Monitor for the HAPPEX Experiment by :
Download or read book Digital Beam Position Monitor for the HAPPEX Experiment written by and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed HAPPEX experiment at CEBAF employs a three cavity monitor system for high precision (1um), high bandwidth (100 kHz) position measurements. This is performed using a cavity triplet consisting of two TM110-mode cavities (one each for X and Y planes) combined with a conventional TM010-mode cavity for a phase and magnitude reference. Traditional systems have used the TM010 cavity output to directly down convert the BPM cavity signals to base band. The multi-channel HAPPEX digital receiver simultaneously I/Q samples each cavity and extracts position using a CORDIC algorithm. The hardware design consists of a RF receiver daughter board and a digital processor motherboard that resides in a VXI crate. The daughter board down converts 1.497 GHz signals from the TM010 cavity and X and Y signals from the TM110 cavities to 3 MHz and extracts the quadrature digital signals. The motherboard processes this data and computes beam intensity and X-Y positions with resolution of 1um, 100 kHz output bandwidth, and overall latency of 1us. The results are available in both the analog and digital format.
Book Synopsis Measuring Emittance Using Beam Position Monitors by :
Download or read book Measuring Emittance Using Beam Position Monitors written by and published by . This book was released on 1993 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Los Alamos Advanced Free Electron Laser uses a high charge (greater than InC), low emittance (normalized rams emittance less than 5[pi] mm mrad) photoinjector driven accelerator. The high brightness achieved is due, in large part, to the rapid acceleration of the electrons to relativistic velocities. As a result, the beam does not have time to thermalize its distribution and its universe profile is, in general, non-Gaussian. This, coupled with the very high brightness, makes it difficult to measure the transverse emittance. Techniques used must be able to withstand the rigors of very intense electron beams, and not be reliant on Gaussian assumptions. Beam position monitors are ideal for this. They are not susceptible to beam damage, and it has been shown previously that they can be used to measure the transverse emittance of a beam with a Gaussian profile. However, this Gaussian restriction is not necessary and, in fact, a transverse emittance measurement using beam position monitors is independent of the beam's distribution.
Book Synopsis Design and Analysis Techniques for Cavity Beam Position Monitor Systems for Electron Accelerators by : Nirav Yashvantray Joshi
Download or read book Design and Analysis Techniques for Cavity Beam Position Monitor Systems for Electron Accelerators written by Nirav Yashvantray Joshi and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Investigation of Beam Alignment Monitor Technologies for the LCLS FEL Undulator by :
Download or read book Investigation of Beam Alignment Monitor Technologies for the LCLS FEL Undulator written by and published by . This book was released on 1998 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: To maintain gain in the 100 m long linac-driven Linac Coherent Light Source (LCLS) FEL undulator, the electron and photon beams must propagate colinearly to within -5 [mu]m rms over distances comparable to the 11.7 m FEL gain length in the 6 mm diameter undulator vacuum chamber. The authors have considered a variety of intercepting and non-intercepting position monitor technologies to establish and maintain this beam alignment. They present a summary discussion of the applicability and estimated performance of monitors detecting synchrotron radiation, transition and diffraction radiation, fluorescence, photoemission or bremsstrahlung from thin wires, Compton scattering from laser beams, and image currents from the electron beam. They conclude that: (1) non-intercepting RF cavity electron BPMs, together with a beam based alignment system, the best suited for this application; and (2) insertable intercepting wire monitors are valuable for rough alignment, for beam size measurements, and for simultaneous measurement of electron and photon beam position by detecting bremsstrahlung from electrons and diffracted x-rays from the photo beam.
