Design And Construction Of Tailings Dams

Author : Tarek Hamade
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (922 download)

DOWNLOAD NOW!

Download or read book Geotechnical Design of Tailings Dams written by Tarek Hamade and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Mine tailings dams are geotechnical structures that are designed to provide adequate and safe storage of tailings materials both during and after the end of mine life. The design of tailings dams is currently based on limit equilibrium methods (LEM) which are used to calculate slope stability safety factors under various operational loads. The minimum safety factor obtained from these analyses is retained to be the design safety factor. LEM's however suffer from a number of shortcomings most notably the lack of information on dam deformation and the interaction between effective stress and pore pressure. For this, advanced numerical modeling techniques accounting for the hydro-mechanical coupling occurring in the dam structure have been developed. These models provide much greater insight into the geotechnical behavior of the tailings dam. However, both LEM and numerical modeling approaches are deterministic in nature; thus, they do not take into consideration the inherent uncertainty of the construction material properties -- a fact that is well known to the geotechnical engineer, yet, needs to be addressed.In this thesis, stochastic analysis approaches such as the Monte Carlo (MC) method are adopted to investigate the effect of the inherent uncertainty in material properties on the design factor of safety. Both LEM and coupled hydro-mechanical numerical models are first developed and the results for deterministic models are compiled. These are then compared with the result obtained from stochastic analyses. A case study of a new water retention tailings dam project design with well documented geotechnical data is adopted throughout the thesis study. First the LEM analysis was pursued followed by a sensitivity analysis to determine the most influential parameters on the design safety factor. Next, a fully coupled hydro-mechanical model was developed with FLAC2D in which the construction sequence was simulated in seven stages. The factor of safety (FOS) was calculated at the end of every stage using the Strength Reduction Technique (SRT). Following that, the Point Estimate Method (PEM) was then used to obtain the probability of unsatisfactory performance by considering the dam's core angle of friction, cohesion and permeability as stochastic variables. The coefficient of variation for the material properties was varied and its consequence on the probability was recorded. Next, the MC method was adopted to calculate the tailings dam's probability of unsatisfactory performance as well as its reliability. The effect of changing the probability density function (PDF) of the stochastic input parameter on the output reliability was further analyzed. Furthermore, the effect of randomness at the local level was studied using the Random Monte-Carlo (RMC) method and compared to the output of the MC method.Finally, the effect of the coefficient of correlation between the dam's core angle of friction and its cohesion on the impoundment's reliability was analyzed. This was followed by an advanced stochastic analysis using the MC method that included a third stochastic variable, the dam's core permeability. The incorporation of both mechanical and hydraulic parameters as stochastic variables lowered the impoundment's reliability; thus, highlighting the power and novelty in the hydro-mechanical stochastic analysis hybrid approach. The results of all analyses are presented in the thesis along with the findings in the conclusion." --