Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Competition And The Motor Vehicle Industry
Download Competition And The Motor Vehicle Industry full books in PDF, epub, and Kindle. Read online Competition And The Motor Vehicle Industry ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Automotive Fuel Economy by : National Research Council
Download or read book Automotive Fuel Economy written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents realistic estimates for the level of fuel economy that is achievable in the next decade for cars and light trucks made in the United States and Canada. A source of objective and comprehensive information on the topic, this book takes into account real-world factors such as the financial conditions in the automotive industry, costs and benefits to consumers, and marketability of high-efficiency vehicles. The committee is composed of experts from the fields of science, technology, finance, and regulation and offers practical evaluations of technological improvements that could contribute to increased fuel efficiency. The volume also examines potential barriers to improvement, such as high production costs, regulations on safety and emissions, and consumer preferences. This practical book is of considerable interest to car and light truck manufacturers, policymakers, federal and state agencies, and the public.
Download or read book Build To Order written by Glenn Parry and published by Springer Science & Business Media. This book was released on 2008-07-23 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 100 years the European Automotive Industry has been repeatedly challenged by best practice. First by the United States, through the development of ‘mass production’ pioneered by Henry Ford and more recently by ‘lean production techniques’ as practised by the leading Japanese producers, particularly Toyota. It has consistently risen to these challenges and has shown it can compete and even outperform its competitors with world-class products. However, the European - dustry is now faced with growing competition and growth from new emerging low-cost countries and needs to re-define its competitive advantage to remain at the forefront of the sector. Automotive growth is driven by two factors, new m- kets and new technologies. Global competition is increasing, with technology and product differentiation becoming the most important sales factors, but with c- tinued cost pressure. Within the market the winners will be more profitable and the losers will disappear. The Automotive Industry makes a significant contribution to the socio-economic fabric of the European Union. Manufacturing output represents €700 billion and research and development spending €24 billion. European automotive suppliers number 5000 member companies and represent 5 million employees and generate €500 billion in revenues. These are significant figures that generate wealth and high value employment within the EU. European firms must consistently improve their competitive position to ensure that the industry does not migrate to growing new markets.
Book Synopsis The Competitive Status of the U.S. Auto Industry by : National Research Council
Download or read book The Competitive Status of the U.S. Auto Industry written by National Research Council and published by National Academies Press. This book was released on 1982-02-01 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Automobiles and the Future by : Robert Cole
Download or read book Automobiles and the Future written by Robert Cole and published by U of M Center For Japanese Studies. This book was released on 1983-01-01 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the time of the U.S.-Japan auto conferences in March 1983, the hoped-for economic recovery as manifested in auto sales had revealed itself quite modestly. Three months later, the indicators were more robust and certainly long overdue for those whose livelihood depends on the health of the industry--some of whom are university professors. With Japanese import restrictions in place until March 1984 and drastically reduced break-even points for domestic manufactures, rising consumer demand holds great promise for the industry. The rapidly rising stock prices of the auto-makers captures well the sense of heightened optimism, as do the various forecasts for improved profits. While the news is certainly welcome, it nevertheless should be greeted with caution. As Mr. Perkins noted at the conference, "we have a tendency to forget things very quickly. If we have a boom market this year, there is a good chance that a lot of things we learned will be forgotten." To put the matter differently and more bluntly, with growing prosperity there is the risk that management will fall back into old habits, making impossible the achievement of sustained quality and productivity improvement. Similarly, the commitment to develop cooperative relations with workers and suppliers will weaken. The union will be under membership pressure to retrieve concessions rather than to take the longer-term view. This longer-term view recognizes that "up-front increases" and adherence to existing work rules increasingly come at the sacrifice of future job security. Government policymakers will turn their attention away from the industry. This may not mean a great deal given how weakly focused their attentions has been during the last three years and how mixed and contradictory government auto policies have been for over a decade.
Download or read book Wrecked written by Joshua Murray and published by Russell Sage Foundation. This book was released on 2019-06-13 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: At its peak in the 1950s and 1960s, automobile manufacturing was the largest, most profitable industry in the United States and residents of industry hubs like Detroit and Flint, Michigan had some of the highest incomes in the country. Over the last half-century, the industry has declined, and American automakers now struggle to stay profitable. How did the most prosperous industry in the richest country in the world crash and burn? In Wrecked, sociologists Joshua Murray and Michael Schwartz offer an unprecedented historical-sociological analysis of the downfall of the auto industry. Through an in-depth examination of labor relations and the production processes of automakers in the U.S. and Japan both before and after World War II, they demonstrate that the decline of the American manufacturers was the unintended consequence of their attempts to weaken the bargaining power of their unions. Today Japanese and many European automakers produce higher quality cars at lower cost than their American counterparts thanks to a flexible form of production characterized by long-term sole suppliers, assembly and supply plants located near each other, and just-in-time delivery of raw materials. While this style of production was, in fact, pioneered in the U.S. prior to World War II, in the years after the war, American automakers deliberately dismantled this system. As Murray and Schwartz show, flexible production accelerated innovation but also facilitated workers’ efforts to unionize plants and carry out work stoppages. To reduce the efficacy of strikes and combat the labor militancy that flourished between the Depression and the postwar period, the industry dispersed production across the nation, began maintaining large stockpiles of inventory, and eliminated single sourcing. While this restructuring of production did ultimately reduce workers’ leverage, it also decreased production efficiency and innovation. The U.S. auto industry has struggled ever since to compete with foreign automakers, and formerly thriving motor cities have suffered the consequences of mass deindustrialization. Murray and Schwartz argue that new business models that reinstate flexible production and prioritize innovation rather than cheap labor could stem the outsourcing of jobs and help revive the auto industry. By clarifying the historical relationships between production processes, organized labor, and industrial innovation, Wrecked provides new insights into the inner workings and decline of the U.S. auto industry.
Book Synopsis New Frontiers of the Automobile Industry by : Alex Covarrubias V.
Download or read book New Frontiers of the Automobile Industry written by Alex Covarrubias V. and published by Springer Nature. This book was released on 2019-11-28 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysing developments in digital technologies and institutional changes, this book provides an overview of the current frenetic state of transformation within the global automobile industry. An ongoing transition brought about by the relocation of marketing, design and production centres to emerging economies, and experimentation with new mobility systems such as electrical, autonomous vehicles, this process poses the question as to how original equipment manufacturers (OEMs) and newcomers can remain competitive and ensure sustainability. With contributions from specialists in the automobile sector, this collection examines the shifts in power and geographical location occurring in the industry, and outlines the key role that public policy has in generating innovation in entrepreneurial states. Offering useful insights into the challenges facing emerging economies in their attempts to grow within the automobile industry, this book will provide valuable reading for those researching internationalization and emerging markets, business strategy and more specifically, the automotive industry.
Book Synopsis The Concept of the Corporation by : Peter Ferdinand Drucker
Download or read book The Concept of the Corporation written by Peter Ferdinand Drucker and published by Signet Book. This book was released on 1964 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Operations Management in Automotive Industries by : Marco Gobetto
Download or read book Operations Management in Automotive Industries written by Marco Gobetto and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has proved its worth over the years as a text for courses in Production Management at the Faculty of Automotive Engineering in Turin, Italy, but deserves a wider audience as it presents a compendium of basics on Industrial Management, since it covers all major topics required. It treats all subjects from product development and “make or buy”-decision strategies to the manufacturing systems setting and management through analysis of the main resources needed in production and finally exploring the supply chain management and the procurement techniques. The very last chapter recapitulates the previous ones by analysing key management indicators to pursue the value creation that is the real purpose of every industrial enterprise. As an appendix, a specific chapter is dedicated to the basics of production management where all main relevant definitions, techniques and criteria are treated, including some numerical examples, in order to provide an adequate foundation for understanding the other chapters. This book will be of use not only to Automotive Engineering students but a wide range of readers who wish to gain insight in the world of automotive engineering and the automotive industry in general.
Book Synopsis Competition and the Motor Vehicle Industry by : General Motors Corporation
Download or read book Competition and the Motor Vehicle Industry written by General Motors Corporation and published by . This book was released on 1974 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis U. S. Motor Vehicle Industry by : Bill Canis
Download or read book U. S. Motor Vehicle Industry written by Bill Canis and published by DIANE Publishing. This book was released on 2011 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a print on demand edition of a hard to find publication. An in-depth analysis of the 2009 crisis in the U.S. auto ind¿y. and its prospects for regaining domestic and global competitiveness. Analyzes bus. and policy issues arising from the restructurings within the industry. The year 2009 was marked by recession and a crisis in global credit markets; the bankruptcy of GM and Chrysler; the incorp. of successor co.; hundreds of parts supplier bankruptcies; plant closings and worker buyouts; the cash-for-clunkers program; and increasing production and sales at year¿s end. Also examines the successes of Ford and the increasing presence of foreign-owned OEM, foreign-owned parts mfrs., competition from imported vehicles, and a buildup of global over-capacity that threatens the recovery of U.S. domestic producers.
Book Synopsis Machine that Changed the World by : James P. Womack
Download or read book Machine that Changed the World written by James P. Womack and published by Simon and Schuster. This book was released on 1990 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Draws conclusions for the future of the industry in the USA.
Book Synopsis Japan and the Global Automotive Industry by : Koichi Shimokawa
Download or read book Japan and the Global Automotive Industry written by Koichi Shimokawa and published by Cambridge University Press. This book was released on 2010-06-03 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Japanese automotive industry enjoyed spectacular success in the 1980s. This was largely due to the so-called 'Lean Production System' - the combination of an efficient production system, an effective supplier system, and a product development system. In the 1990s the industry fell on hard times because of the Japanese asset price bubble and extreme currency appreciation. In this book, eminent industry specialist Koichi Shimokawa draws on his thirty years of research and fieldwork with Japanese and American firms, to show how the Japanese automotive industry has managed to recover from this difficult period. He shows how firms like Toyota were able to transfer Japanese systems to overseas plants and how they have changed in order to compete in increasingly globalized markets. In addition, the book also addresses the two major challenges to the current industry model: the rise of China and the environmental and energy supply situation.
Book Synopsis Marketing Innovations in the Automotive Industry by : Elena Candelo
Download or read book Marketing Innovations in the Automotive Industry written by Elena Candelo and published by Springer. This book was released on 2019-04-09 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes that, within the automotive industry, revised marketing principles and innovative marketing strategies are needed to address more effectively the unprecedented challenges posed by the modern digital revolution. The starting point for these proposals is a thorough analysis of the evolution of marketing in the industry across three ages of technological innovations – the mechanical, the electronic, and the digital. The main objectives are first, to illustrate how study of the past can help carmakers as they move forward into the unknown, and second, to identify the main choices that they will face. The central premise is that unusual times call for unusual strategies. By mining the past in order to foresee likely future developments regarding competition and marketing strategies within the car industry, the book will appeal both to researchers and to present or future managers in the automotive and other innovation-driven sectors.
Book Synopsis The Automotive Industry and the Environment by : P Nieuwenhuis
Download or read book The Automotive Industry and the Environment written by P Nieuwenhuis and published by Elsevier. This book was released on 2003-07-25 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry currently faces huge challenges. The fundamental technological paradigm it relies on, volume production, has become progressively more unprofitable in the face of increasingly segmented niche markets. At the same time it faces increasing regulatory and social pressures to improve both the sustainability of its products and methods of production. Building on a wealth of research, The automotive industry and the environment addresses those challenges and how they can be met in producing a sustainable and profitable industry for the future.The authors first discuss the development of the automotive industry and the problems it currently faces. They then consider the solutions the industry can adopt. The book reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability. However, these technologies can only be fully exploited if methods of manufacture change. The book also describes models of decentralised production, particularly the micro factory retailing (MFR) model, which provide an alternative to volume production and promise to be both more sustainable and more profitable.The automotive industry and the environment provides both a cogent diagnosis of the environmental and other problems facing the industry and a blueprint for a better future. It will be widely welcomed by the industry, policy makers and all those concerned with sustainable transport. - Addresses the challenges facing the automotive industry, from the increasing unprofitability of volume production to regulatory and social pressures to improve environmental and product sustainability - Examines how the automotive industry can meet the current challenges in producing a sustainable and profitable industry for the future - Reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability
Book Synopsis The Rise and Decline of the British Motor Industry by : Roy A. Church
Download or read book The Rise and Decline of the British Motor Industry written by Roy A. Church and published by Cambridge University Press. This book was released on 1995-09-14 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise 1995 review of the strengths and weaknesses of the British motor industry during the one hundred years since its foundation.
Download or read book Comeback written by Paul Ingrassia and published by Simon and Schuster. This book was released on 2013-05-14 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Comeback, Pulitzer Prize-winners Paul Ingrassia and Joseph B. White take us to the boardrooms, the executive offices, and the shop floors of the auto business to reconstruct, in riveting detail, how America's premier industry stumbled, fell, and picked itself up again. The story begins in 1982, when Honda started building cars in Marysville, Ohio, and the entire U.S. car industry seemed to be on the brink of extinction. It ends just over a decade later, with a remarkable turn of the tables, as Japan's car industry falters and America's Big Three emerge as formidable global competitors. Comeback is a story propelled by larger-than-life characters -- Lee Iacocca, Henry Ford II, Don Petersen, Roger Smith, among many others -- and their greed, pride, and sheer refusal to face facts. But it is also a story full of dedicated, unlikely heroes who struggled to make the Big Three change before it was too late.
Book Synopsis Advanced Composite Materials for Automotive Applications by : Ahmed Elmarakbi
Download or read book Advanced Composite Materials for Automotive Applications written by Ahmed Elmarakbi and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry faces many challenges, including increased global competition, the need for higher-performance vehicles, a reduction in costs and tighter environmental and safety requirements. The materials used in automotive engineering play key roles in overcoming these issues: ultimately lighter materials mean lighter vehicles and lower emissions. Composites are being used increasingly in the automotive industry due to their strength, quality and light weight. Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness provides a comprehensive explanation of how advanced composite materials, including FRPs, reinforced thermoplastics, carbon-based composites and many others, are designed, processed and utilized in vehicles. It includes technical explanations of composite materials in vehicle design and analysis and covers all phases of composite design, modelling, testing and failure analysis. It also sheds light on the performance of existing materials including carbon composites and future developments in automotive material technology which work towards reducing the weight of the vehicle structure. Key features: Chapters written by world-renowned authors and experts in their own fields Includes detailed case studies and examples covering all aspects of composite materials and their application in the automotive industries Unique topic integration between the impact, crash, failure, damage, analysis and modelling of composites Presents the state of the art in composite materials and their application in the automotive industry Integrates theory and practice in the fields of composite materials and automotive engineering Considers energy efficiency and environmental implications Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness is a comprehensive reference for those working with composite materials in both academia and industry, and is also a useful source of information for those considering using composites in automotive applications in the future.
