Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Compare Energy Use In Variable Refrigerant Flow Heat Pumps Field Demonstration And Computer Model
Download Compare Energy Use In Variable Refrigerant Flow Heat Pumps Field Demonstration And Computer Model full books in PDF, epub, and Kindle. Read online Compare Energy Use In Variable Refrigerant Flow Heat Pumps Field Demonstration And Computer Model ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Compare Energy Use in Variable Refrigerant Flow Heat Pumps Field Demonstration and Computer Model by :
Download or read book Compare Energy Use in Variable Refrigerant Flow Heat Pumps Field Demonstration and Computer Model written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Variable Refrigerant Flow (VRF) heat pumps are often regarded as energy efficient air-conditioning systems which offer electricity savings as well as reduction in peak electric demand while providing improved individual zone setpoint control. One of the key advantages of VRF systems is minimal duct losses which provide significant reduction in energy use and duct space. However, there is limited data available to show their actual performance in the field. Since VRF systems are increasingly gaining market share in the US, it is highly desirable to have more actual field performance data of these systems. An effort was made in this direction to monitor VRF system performance over an extended period of time in a US national lab test facility. Due to increasing demand by the energy modeling community, an empirical model to simulate VRF systems was implemented in the building simulation program EnergyPlus. This paper presents the comparison of energy consumption as measured in the national lab and as predicted by the program. For increased accuracy in the comparison, a customized weather file was created by using measured outdoor temperature and relative humidity at the test facility. Other inputs to the model included building construction, VRF system model based on lab measured performance, occupancy of the building, lighting/plug loads, and thermostat set-points etc. Infiltration model inputs were adjusted in the beginning to tune the computer model and then subsequent field measurements were compared to the simulation results. Differences between the computer model results and actual field measurements are discussed. The computer generated VRF performance closely resembled the field measurements.
Download or read book Technical Subtopic 2.1 written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Central Florida/Florida Solar Energy Center, in cooperation with the Electric Power Research Institute and several variable-refrigerant-flow heat pump (VRF HP) manufacturers, provided a detailed computer model for a VRF HP system in the United States Department of Energy's (U.S. DOE) EnergyPlus? building energy simulation tool. Detailed laboratory testing and field demonstrations were performed to measure equipment performance and compare this performance to both the manufacturer's data and that predicted by the use of this new model through computer simulation. The project goal was to investigate the complex interactions of VRF HP systems from an HVAC system perspective, and explore the operational characteristics of this HVAC system type within a laboratory and real world building environment. Detailed laboratory testing of this advanced HVAC system provided invaluable performance information which does not currently exist in the form required for proper analysis and modeling. This information will also be useful for developing and/or supporting test standards for VRF HP systems. Field testing VRF HP systems also provided performance and operational information pertaining to installation, system configuration, and operational controls. Information collected from both laboratory and field tests were then used to create and validate the VRF HP system computer model which, in turn, provides architects, engineers, and building owners the confidence necessary to accurately and reliably perform building energy simulations. This new VRF HP model is available in the current public release version of DOE?s EnergyPlus software and can be used to investigate building energy use in both new and existing building stock. The general laboratory testing did not use the AHRI Standard 1230 test procedure and instead used an approach designed to measure the field installed full-load operating performance. This projects test methodology used the air enthalpy method where relevant air-side parameters were controlled while collecting output performance data at discreet points of steady-state operation. The primary metrics include system power consumption and zonal heating and cooling capacity. Using this test method, the measured total cooling capacity was somewhat lower than reported by the manufacturer. The measured power was found to be equal to or greater than the manufacturers indicated power. Heating capacity measurements produced similar results. The air-side performance metric was total cooling and heating energy since the computer model uses those same metrics as input to the model. Although the sensible and latent components of total cooling were measured, they are not described in this report. The test methodology set the thermostat set point temperature very low for cooling and very high for heating to measure full-load performance and was originally thought to provide the maximum available capacity. Manufacturers stated that this test method would not accurately measure performance of VRF systems which is now believed to be a true statement. Near the end of the project, an alternate test method was developed to better represent VRF system performance as if field installed. This method of test is preliminarily called the Load Based Method of Test where the load is fixed and the indoor conditions and unit operation are allowed to fluctuate. This test method was only briefly attempted in a laboratory setting but does show promise for future lab testing. Since variable-speed air-conditioners and heat pumps include an on-board control algorithm to modulate capacity, these systems are difficult to test. Manufacturers do have the ability to override internal components to accommodate certification procedures, however, it is unknown if the resulting operation is replicated in the field, or if so, how often. Other studies have shown that variable-speed air-conditioners and heat pumps do out perform their single-speed coun ...
Book Synopsis Comparison of Energy Efficiency Between Variable Refrigerant Flow Systems and Ground Source Heat Pump Systems by :
Download or read book Comparison of Energy Efficiency Between Variable Refrigerant Flow Systems and Ground Source Heat Pump Systems written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: With the current movement toward net zero energy buildings, many technologies are promoted with emphasis on their superior energy efficiency. The variable refrigerant flow (VRF) and ground source heat pump (GSHP) systems are probably the most competitive technologies among these. However, there are few studies reporting the energy efficiency of VRF systems compared with GSHP systems. In this article, a preliminary comparison of energy efficiency between the air-source VRF and GSHP systems is presented. The computer simulation results show that GSHP system is more energy efficient than the air-source VRF system for conditioning a small office building in two selected US climates. In general, GSHP system is more energy efficient than the air-source VRV system, especially when the building has significant heating loads. For buildings with less heating loads, the GSHP system could still perform better than the air-source VRF system in terms of energy efficiency, but the resulting energy savings may be marginal.
Book Synopsis Computer Modeling VRF Heat Pumps in Commercial Buildings Using EnergyPlus by :
Download or read book Computer Modeling VRF Heat Pumps in Commercial Buildings Using EnergyPlus written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Variable Refrigerant Flow (VRF) heat pumps are increasingly used in commercial buildings in the United States. Monitored energy use of field installations have shown, in some cases, savings exceeding 30% compared to conventional heating, ventilating, and air-conditioning (HVAC) systems. A simulation study was conducted to identify the installation or operational characteristics that lead to energy savings for VRF systems. The study used the Department of Energy EnergyPlus? building simulation software and four reference building models. Computer simulations were performed in eight U.S. climate zones. The baseline reference HVAC system incorporated packaged single-zone direct-expansion cooling with gas heating (PSZ-AC) or variable-air-volume systems (VAV with reheat). An alternate baseline HVAC system using a heat pump (PSZ-HP) was included for some buildings to directly compare gas and electric heating results. These baseline systems were compared to a VRF heat pump model to identify differences in energy use. VRF systems combine multiple indoor units with one or more outdoor unit(s). These systems move refrigerant between the outdoor and indoor units which eliminates the need for duct work in most cases. Since many applications install duct work in unconditioned spaces, this leads to installation differences between VRF systems and conventional HVAC systems. To characterize installation differences, a duct heat gain model was included to identify the energy impacts of installing ducts in unconditioned spaces. The configuration of variable refrigerant flow heat pumps will ultimately eliminate or significantly reduce energy use due to duct heat transfer. Fan energy is also studied to identify savings associated with non-ducted VRF terminal units. VRF systems incorporate a variable-speed compressor which may lead to operational differences compared to single-speed compression systems. To characterize operational differences, the computer model performance curves used to simulate cooling operation are also evaluated. The information in this paper is intended to provide a relative difference in system energy use and compare various installation practices that can impact performance. Comparative results of VRF versus conventional HVAC systems include energy use differences due to duct location, differences in fan energy when ducts are eliminated, and differences associated with electric versus fossil fuel type heating systems.
Book Synopsis A Variable Refrigerant Flow Heat Pump Computer Model in EnergyPlus by :
Download or read book A Variable Refrigerant Flow Heat Pump Computer Model in EnergyPlus written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper provides an overview of the variable refrigerant flow heat pump computer model included with the Department of Energy's EnergyPlusTM whole-building energy simulation software. The mathematical model for a variable refrigerant flow heat pump operating in cooling or heating mode, and a detailed model for the variable refrigerant flow direct-expansion (DX) cooling coil are described in detail.
Book Synopsis Verification of a VRF Heat Pump Computer Model in EnergyPlus by :
Download or read book Verification of a VRF Heat Pump Computer Model in EnergyPlus written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper provides verification results of the EnergyPlus variable refrigerant flow (VRF) heat pump computer model using manufacturer's performance data. The paper provides an overview of the VRF model, presents the verification methodology, and discusses the results. The verification provides quantitative comparison of full and part-load performance to manufacturer's data in cooling-only and heating-only modes of operation. The VRF heat pump computer model uses dual range bi-quadratic performance curves to represent capacity and Energy Input Ratio (EIR) as a function of indoor and outdoor air temperatures, and dual range quadratic performance curves as a function of part-load-ratio for modeling part-load performance. These performance curves are generated directly from manufacturer's published performance data. The verification compared the simulation output directly to manufacturer's performance data, and found that the dual range equation fit VRF heat pump computer model predicts the manufacturer's performance data very well over a wide range of indoor and outdoor temperatures and part-load conditions. The predicted capacity and electric power deviations are comparbale to equation-fit HVAC computer models commonly used for packaged and split unitary HVAC equipment.
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1983 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Energy Update written by and published by . This book was released on 1984 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Energy Abstracts for Policy Analysis by :
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1978 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis The Office of Industrial Technologies Technical Reports by :
Download or read book The Office of Industrial Technologies Technical Reports written by and published by . This book was released on 1992 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis EPA Publications Bibliography by : United States. Environmental Protection Agency
Download or read book EPA Publications Bibliography written by United States. Environmental Protection Agency and published by . This book was released on 1997 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Renewable Energy, Energy Efficiency, and Competitiveness Publisher : ISBN 13 : Total Pages :108 pages Book Rating :4.0/5 ( download)
Book Synopsis Industrial Competitiveness Through Energy Efficiency and Waste Minimization by : United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Renewable Energy, Energy Efficiency, and Competitiveness
Download or read book Industrial Competitiveness Through Energy Efficiency and Waste Minimization written by United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Renewable Energy, Energy Efficiency, and Competitiveness and published by . This book was released on 1993 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Government Reports Announcements & Index by :
Download or read book Government Reports Announcements & Index written by and published by . This book was released on 1988 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Government Reports Annual Index by :
Download or read book Government Reports Annual Index written by and published by . This book was released on 1992 with total page 1730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Publications by : United States. National Bureau of Standards
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1987 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:
