Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Cold Climate Hvac 2018
Download Cold Climate Hvac 2018 full books in PDF, epub, and Kindle. Read online Cold Climate Hvac 2018 ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Cold Climate HVAC 2018 by : Dennis Johansson
Download or read book Cold Climate HVAC 2018 written by Dennis Johansson and published by Springer. This book was released on 2018-12-12 with total page 1095 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the 9th Cold Climate HVAC conference, which was held in Kiruna, Sweden in 2018. The conference highlighted key technologies and processes that allow scientists, designers, engineers, manufacturers and other decision makers in cold climate regions to achieve good indoor environmental quality (IEQ) with a minimum use of energy and other resources. The conference addressed various technical, economic and social aspects of buildings and HVAC systems in new and renovated buildings. This proceedings volume gathers peer-reviewed papers by a diverse and international range of authors and showcases perspectives and practices in cold climate building design from around the globe. The following major aspects, which include both fundamental and theoretical research as well as applications and case studies, are covered: (1) Energy and power efficiency and low-energy buildings; (2) Renovating buildings; (3) Efficient HVAC components; (4) Heat pumps and geothermal systems; (5) Municipal and city energy systems; (6) Construction management; (7) Buildings in operation; (8) Building simulation; (9) Reference data; (10) Transdisciplinary connections and social aspects; (11) Indoor environments and health; (12) Moisture safety and water damage; (13) Codes, regulations, standards and policies; and (14) Other aspects of buildings in cold climates.
Book Synopsis Energy Performance and Indoor Climate Analysis in Buildings by : Jarek Kurnitski
Download or read book Energy Performance and Indoor Climate Analysis in Buildings written by Jarek Kurnitski and published by MDPI. This book was released on 2019-11-21 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: HVAC systems, load shifting, indoor climate, and energy and ventilation performance analyses are the key topics when improving energy performance in new and renovated buildings. This development has been boosted by the recently established nearly zero energy building requirements that will soon be in use in all EU Member States, as well as similar long-term zero energy building targets in Japan, the US, and other countries. The research covered in this Special Issue provides evidence of how new technical solutions have worked, in practice, in new or renovated buildings, and also discusses problems and how solutions should be further developed. Another focus is on the more detailed calculation methods needed for the correct design and sizing of dedicated systems, and for accurate quantification of energy savings. Occupant behavior and building operation is also examined, in order to avoid common performance gaps between calculated and measured performance. These topics demonstrate the challenge of high performance buildings as, in the end, comfortable buildings with good indoor climate which are easy and cheap to operate and maintain are expected by end customers. Ventilation performance, heating and cooling, sizing, energy predictions and optimization, load shifting, and field studies are some of the key topics in this Special Issue, contributing to the future of high performance buildings with reliable operation.
Book Synopsis Routledge Handbook of Resilient Thermal Comfort by : Fergus Nicol
Download or read book Routledge Handbook of Resilient Thermal Comfort written by Fergus Nicol and published by Routledge. This book was released on 2022-04-19 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together some of the finest academics in the field to address important questions around the way in which people experience their physical environments, including temperature, light, air-quality, acoustics and so forth. It is of importance not only to the comfort people feel indoors, but also the success of any building as an environment for its stated purpose. The way in which comfort is produced and perceived has a profound effect on the energy use of a building and its resilience to the increasing dangers posed by extreme weather events, and power outages caused by climate change. Research on thermal comfort is particularly important not only for the health and well-being of occupants but because energy used for temperature control is responsible for a large part of the total energy budget of the built environment. In recent years there has been an increasing focus on the vulnerabilities of the thermal comfort system; how and why are buildings failing to provide safe and agreeable thermal environments at an affordable price? Achieving comfort in buildings is a complex subject that involves physics, behaviour, physiology, energy conservation, climate change, and of course architecture and urban design. Bringing together the related disciplines in one volume lays strong, multi-disciplinary foundations for new research and design directions for resilient 21st century architecture. This book heralds workable solutions and emerging directions for key fields in building the resilience of households, organisations and populations in a heating world.
Book Synopsis Cold-climate Buildings Design Guide by : Ashrae
Download or read book Cold-climate Buildings Design Guide written by Ashrae and published by Ashrae. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings in arctic and subarctic climates face unique challenges, not only the cold,but also remoteness, limited utilities, permafrost, and extreme temperature shifts.Built structures must meet these challenges while maintaining occupant comfort and, ifpossible, minimizing impact on the environment. Harmonizing human comfort with theclimatic realities of these environments can be a delicate balancing act. Strategic designis key to building, commissioning, and operating efficient and long-lasting cold-climatestructures. This unified guide to cold-climate design provides expert knowledge on theissues commonly faced in arctic and subarctic climates.In addition to cold-climate considerations in HVAC calculations and system design, this book¿s chapters cover sustainability, controls, building design, and commissioning, all from this distinctive climatic perspective. The book also includes an appendix with seven case studies of buildings located in cold and extreme cold climates. These buildings are leaders in their field with regard to both efficiency and cold-climate design.Aimed at each member of the building team, from the designer and architect to thecommissioning authority, Cold-Climate Buildings Design Guide will serve as a valuableresource from the initial planning to completion of cold-climate buildings.
Book Synopsis Proceedings of the 5th International Conference on Building Energy and Environment by : Liangzhu Leon Wang
Download or read book Proceedings of the 5th International Conference on Building Energy and Environment written by Liangzhu Leon Wang and published by Springer Nature. This book was released on 2023-09-04 with total page 2933 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 5th International Conference on Building Energy and Environment (COBEE2022), held in Montreal, Canada, in July 2022. The work focuses on the most recent technologies and knowledge of building energy and the environment, including health, energy, urban microclimate, smart cities, safety, etc. The contents make valuable contributions to academic researchers, engineers in the industry, and regulators of buildings. As well, readers encounter new ideas for achieving healthy, comfortable, energy-efficient, resilient, and safe buildings.
Book Synopsis Building Engineering Facing the Challenges of the 21st Century by : David Bienvenido-Huertas
Download or read book Building Engineering Facing the Challenges of the 21st Century written by David Bienvenido-Huertas and published by Springer Nature. This book was released on 2023-07-24 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building engineering is a complex and constantly evolving branch. The needs of the XXI century society cause a constant change in construction industry due to the need to achieve sustainable and ecological buildings. This affects all levels and phases of this engineering. Given this circumstance, numerous researchers turn their efforts to find optimal solutions for building engineering. For this reason, in this book a holistic analysis of building engineering is carried out from the perspectives that have a greater weight for sustainability objectives. The book is divided into 6 sections: (i) Building materials, which deals with research related to the most innovative and sustainable building materials; (ii) Design and construction, which deals with existing methodologies and advances in design and construction in construction sector; (iii) Building repair and maintenance, which deals with building repair, maintenance and upkeep techniques; (iv) Energy efficiency, which analyses the latest research on the energy efficiency of buildings and their behaviour in the face of climate change; (v) Sustainability, which analyses the establishment of measures to achieve a more sustainable built environment; and (vi) construction management, which compiles the latest studies in the field of Project manager. The 38 chapters of the book together constitute an advance for the topic of building engineering. The aspects covered in the book are of great interest to various sectors, such as researchers, engineers, architects, legislators and interested parties.
Book Synopsis Indoor Air Quality by : Dikaia E. Saraga
Download or read book Indoor Air Quality written by Dikaia E. Saraga and published by MDPI. This book was released on 2020-12-07 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The monitoring of indoor air pollutants in a spatio-temporal basis is challenging. A key element is the access to local (i.e., indoor residential, workplace, or public building) exposure measurements. Unfortunately, the high cost and complexity of most current air pollutant monitors result in a lack of detailed spatial and temporal resolution. As a result, individuals in vulnerable groups (children, pregnant, elderly, and sick people) have little insight into their personal exposure levels. This becomes significant in cases of hyper-local variations and short-term pollution events such as instant indoor activity (e.g., cooking, smoking, and dust resuspension). Advances in sensor miniaturization have encouraged the development of small, inexpensive devices capable of estimating pollutant concentrations. This new class of sensors presents new possibilities for indoor exposure monitoring. This Special Issue invites research in the areas of the triptych: indoor air pollution monitoring, indoor air modeling, and exposure to indoor air pollution. Topics of interest for the Special Issue include, but are not limited to, the following: low-cost sensors for indoor air monitoring; indoor particulate matter and volatile organic compounds; ozone-terpene chemistry; biological agents indoors; source apportionment; exposure assessment; health effects of indoor air pollutants; occupant perception; climate change impacts on indoor air quality.
Book Synopsis Building Science for a Cold Climate by : N. B. Hutcheon
Download or read book Building Science for a Cold Climate written by N. B. Hutcheon and published by Wiley-Interscience. This book was released on 1983 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at understanding the design and performance of building enclosures and their inside environment in cold climates. The information and examples presented relate mainly to Canada.
Book Synopsis Proceedings of EECE 2019 by : Borodinecs Anatolijs
Download or read book Proceedings of EECE 2019 written by Borodinecs Anatolijs and published by Springer Nature. This book was released on 2020-04-29 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of energy, environmental and construction engineering, as presented by international researchers and engineers at the International Scientific Conference Energy, Environmental and Construction Engineering, held in St. Petersburg, Russia on November 19-20, 2019. It covers highly diverse topics, including BIM; bridges, roads and tunnels; building materials; energy efficient and green buildings; structural mechanics; fluid mechanics; measuring technologies; environmental management; power consumption management; renewable energy; smart cities; and waste management. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Book Synopsis Biogas Production by : Nagamani Balagurusamy
Download or read book Biogas Production written by Nagamani Balagurusamy and published by Springer Nature. This book was released on 2021-01-11 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on biogas production by anaerobic digestion, which is the most popular bioenergy technology of today. Using anaerobic digestion for the production of biogas is a sustainable approach that simultaneously also allows the treatment of organic waste. The energy contained in the substrate is released in the form of biogas, which can be employed as a renewable fuel in diverse industrial sectors. Although biogas generation is considered an established process, it continues to evolve, e.g. by incorporating modifications and improvements to increase its efficiency and its downstream applications. The chapters of this book review the progress made related to feedstock, system configuration and operational conditions. It also addresses microbial pathways utilized, as well as storage, transportation and usage of biogas. This book is an up-to-date resource for scientists and students working on improving biogas production.
Book Synopsis Current Advances in Mechanical Engineering by : Saroj Kumar Acharya
Download or read book Current Advances in Mechanical Engineering written by Saroj Kumar Acharya and published by Springer Nature. This book was released on 2021-03-18 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD 2020). The contents focus on latest research and current problems in various branches of mechanical engineering. Some of the topics discussed here include fracture and failure analysis, fuels and alternative fuels, combustion and IC engines, advanced manufacturing technologies, powder metallurgy and rapid prototyping, industrial engineering and automation, supply chain management, design of mechanical systems, vibrations and control engineering, automobile engineering, fluid mechanics and machines, heat transfer, composite materials, micro and nano-engineering for energy storage and conversion, and modeling and simulations. The wide range of topics presented in this book can make it useful for beginners, researchers as well as professionals in mechanical engineering.
Book Synopsis Cross-Laminated Timber Design: Structural Properties, Standards, and Safety by : Mustafa Mahamid
Download or read book Cross-Laminated Timber Design: Structural Properties, Standards, and Safety written by Mustafa Mahamid and published by McGraw Hill Professional. This book was released on 2020-03-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Master the practice of designing structures with cross-laminated timber This comprehensive guide explains the design standards, safety protocols, and codes and regulations engineers need to know to use cross-laminated timber as a structural building material. Featuring contributions from experts in the field, Cross-Laminated Timber Design: Structural Properties, Standards, and Safety introduces the material properties of CLT and goes on to cover the recommended lateral and vertical design techniques. You will get clear explanations of all relevant NDS, ASCE 7, and IBC provisions along with real-world examples and case studies. Sustainability and environmental issues are discussed in full detail. Coverage includes: • An introduction to cross-laminated timber • Product standards for cross-laminated timber • Structural design—gravity • Structural design—lateral • Structural connections • Building envelope design with cross-laminated timber • Acoustics for CLT projects • Fire for CLT projects • Environmental aspects of CLT as a construction material • Sustainability of cross-laminated timber
Book Synopsis Patty's Industrial Hygiene, Program Management and Specialty Areas of Practice by : Barbara Cohrssen
Download or read book Patty's Industrial Hygiene, Program Management and Specialty Areas of Practice written by Barbara Cohrssen and published by John Wiley & Sons. This book was released on 2021-03-25 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition in 1948, Patty’s Industrial Hygiene and Toxicology has become a flagship publication for Wiley. During its nearly seven decades in print, it has become a standard reference for the fields of occupational health and toxicology. The volumes on industrial hygiene are cornerstone reference works for not only industrial hygienists but also chemists, engineers, toxicologists, lawyers, and occupational safety personnel. Volume 4 covers environmental and health and safety program management, with a number of new chapters on sustainability, construction health and safety, health and safety of new energies and working with cannabis.
Book Synopsis Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set by : Vasile Minea
Download or read book Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set written by Vasile Minea and published by CRC Press. This book was released on 2022-07-30 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set focuses on the use of very low-temperature geothermal energy for heating and cooling residential, institutional, and industrial buildings, and aims to increase the design community’s awareness and knowledge of the benefits, design, and installation requirements of commercial/institutional building ground-source heat pumps (GSHP). This set helps readers assess applicability, select a GSHP system type, and estimate building thermal load to ensure proper size for ground-source subsystems, appropriate brine and groundwater flow rates, and apt design of building closed-loops with distributed or central geothermal heat pumps. The first volume addresses fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground- and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, as well as the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. The second volume focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects, as well as the most common and uncommon application fields of basic system configurations. The principles of system integrations and applications in moderate and cold climates are also presented, each followed by case studies. This comprehensive work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Book Synopsis Advances and Trends in Engineering Sciences and Technologies III by : Mohamad Al Ali
Download or read book Advances and Trends in Engineering Sciences and Technologies III written by Mohamad Al Ali and published by CRC Press. This book was released on 2019-03-25 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the 3rd International Conference on Engineering Sciences and Technologies (ESaT 2018), held from 12th - 14th September 2018 in the High Tatras Mountains, Tatranské Matliare, Slovak Republic. ESaT 2018 was organized under the auspices of the Faculty of Civil Engineering, Technical University of Košice - Slovak Republic in collaboration with Peter the Great St. Petersburg Polytechnic University - Russia after the successful organization with excellent feedback of the previous international conferences ESaT 2015 and ESaT 2016. The proceedings is covering various topics and disciplines in civil engineering sciences, such as Buildings and Architectural Engineering, Bearing Structures, Material and Environmental Engineering, Construction Technology and Management, Building Physics and Facilities, Geodesy, Surveying and Mapping, Geotechnics and Traffic Engineering. The proceedings report on new and original progress and trends in various fields of engineering sciences that will be of interest to a wide range of academics and professionals from university and industry. 116 papers originating from more than 10 countries have been accepted for publication in the conference proceedings. Each accepted paper was reviewed by two reviewers, selected according to the scientific area and orientation of the paper, which guarantees topicality, quality and an advanced level of the presented results.
Book Synopsis A Handbook of Sustainable Building Design and Engineering by : Dejan Mumovic
Download or read book A Handbook of Sustainable Building Design and Engineering written by Dejan Mumovic and published by Routledge. This book was released on 2018-10-30 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this authoritative textbook equips students with the tools they will need to tackle the challenges of sustainable building design and engineering. The book looks at how to design, engineer and monitor energy efficient buildings, how to adapt buildings to climate change, and how to make buildings healthy, comfortable and secure. New material for this edition includes sections on environmental masterplanning, renewable technologies, retrofitting, passive house design, thermal comfort and indoor air quality. With chapters and case studies from a range of international, interdisciplinary authors, the book is essential reading for students and professionals in building engineering, environmental design, construction and architecture.
Book Synopsis eWork and eBusiness in Architecture, Engineering and Construction by : Jan Karlshoj
Download or read book eWork and eBusiness in Architecture, Engineering and Construction written by Jan Karlshoj and published by CRC Press. This book was released on 2018-09-03 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: eWork and eBusiness in Architecture, Engineering and Construction 2018 collects the papers presented at the 12th European Conference on Product and Process Modelling (ECPPM 2018, Copenhagen, 12-14 September 2018). The contributions cover complementary thematic areas that hold great promise towards the advancement of research and technological development in the modelling of complex engineering systems, encompassing a substantial number of high quality contributions on a large spectrum of topics pertaining to ICT deployment instances in AEC/FM, including: • Information and Knowledge Management • Construction Management • Description Logics and Ontology Application in AEC • Risk Management • 5D/nD Modelling, Simulation and Augmented Reality • Infrastructure Condition Assessment • Standardization of Data Structures • Regulatory and Legal Aspects • Multi-Model and distributed Data Management • System Identification • Industrilized Production, Smart Products and Services • Interoperability • Smart Cities • Sustainable Buildings and Urban Environments • Collaboration and Teamwork • BIM Implementation and Deployment • Building Performance Simulation • Intelligent Catalogues and Services eWork and eBusiness in Architecture, Engineering and Construction 2018 represents a rich and comprehensive resource for academics and researchers working in the interdisciplinary areas of information technology applications in architecture, engineering and construction. In the last two decades, the biennial ECPPM (European Conference on Product and Process Modelling) conference series, as the oldest BIM conference, has provided a unique platform for the presentation and discussion of the most recent advances with regard to the ICT (Information and Communication Technology) applications in the AEC/FM (Architecture, Engineering, Construction and Facilities Management) domains.
