Cold and Hot Forging

Download Cold and Hot Forging PDF Online Free

Author :
Publisher : ASM International
ISBN 13 : 1615030948
Total Pages : 353 pages
Book Rating : 4.6/5 (15 download)

DOWNLOAD NOW!


Book Synopsis Cold and Hot Forging by : Taylan Altan

Download or read book Cold and Hot Forging written by Taylan Altan and published by ASM International. This book was released on 2004-01-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Editors Altan (Ohio State University), Ngaile (North Carolina University), and Shen (Ladish Company, Inc.) offer this extensive overview of the latest developments in the design of forging operations and dies. Basic technological principles are briefly reviewed in the first two chapters.

CIRP Encyclopedia of Production Engineering

Download CIRP Encyclopedia of Production Engineering PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 9783642206160
Total Pages : 0 pages
Book Rating : 4.2/5 (61 download)

DOWNLOAD NOW!


Book Synopsis CIRP Encyclopedia of Production Engineering by : The International Academy for Produ

Download or read book CIRP Encyclopedia of Production Engineering written by The International Academy for Produ and published by Springer. This book was released on 2014-04-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CIRP Encyclopedia covers the state-of-art of advanced technologies, methods and models for production, production engineering and logistics. While the technological and operational aspects are in the focus, economical aspects are addressed too. The entries for a wide variety of terms were reviewed by the CIRP-Community, representing the highest standards in research. Thus, the content is not only evaluated internationally on a high scientific level but also reflects very recent developments.

Metal Forming Analysis

Download Metal Forming Analysis PDF Online Free

Author :
Publisher : Cambridge University Press
ISBN 13 : 9780521642675
Total Pages : 396 pages
Book Rating : 4.6/5 (426 download)

DOWNLOAD NOW!


Book Synopsis Metal Forming Analysis by : R. H. Wagoner

Download or read book Metal Forming Analysis written by R. H. Wagoner and published by Cambridge University Press. This book was released on 2001-05-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2001 book describes the most important numerical techniques for simulating metal forming operations.

Metal Forming

Download Metal Forming PDF Online Free

Author :
Publisher : ASM International(OH)
ISBN 13 :
Total Pages : 384 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!


Book Synopsis Metal Forming by : Taylan Altan

Download or read book Metal Forming written by Taylan Altan and published by ASM International(OH). This book was released on 1983 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Briefly reviews the basic principles of metal forming but major emphasis is on the latest developments in the design of metal-forming operations and tooling. Discusses the position of metal forming in manufacturing and considers a metal-forming process as a system consisting of several interacting variables. Includes an overall review and classification of all metal-forming processes. The fundamentals of plastic deformation - metal flow, flow stress of metals and yield criteria - are discussed, as are significant practical variables of metal- forming processes such as friction, temperatures and forming machines and their characteristics. Examines approximate methods of analyzing simple forming operations, then looks at massive forming processes such as closed-die forging, hot extrusion, cold forging/ extrusion, rolling and drawing (discussion includes the prediction of stresses and load in each process and applications of computer-aided techniques). Recent developments in metal-forming technology, including CAD/CAM for die design and manufacture, are discussed, and a review of the latest trends in metal flow analysis and simulations.

Metal Forming Handbook

Download Metal Forming Handbook PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 3642588573
Total Pages : 589 pages
Book Rating : 4.6/5 (425 download)

DOWNLOAD NOW!


Book Synopsis Metal Forming Handbook by : Schuler GmbH

Download or read book Metal Forming Handbook written by Schuler GmbH and published by Springer. This book was released on 2012-12-06 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the long tradition of the Schuler Company, the Metal For ming Handbook presents the scientific fundamentals of metal forming technology in a way which is both compact and easily understood. Thus, this book makes the theory and practice of this field accessible to teaching and practical implementation. The first Schuler "Metal Forming Handbook" was published in 1930. The last edition of 1966, already revised four times, was translated into a number of languages, and met with resounding approval around the globe. Over the last 30 years, the field of forming technology has been rad ically changed by a number of innovations. New forming techniques and extended product design possibilities have been developed and introduced. This Metal Forming Handbook has been fundamentally revised to take account of these technological changes. It is both a text book and a reference work whose initial chapters are concerned to pro vide a survey of the fundamental processes of forming technology and press design. The book then goes on to provide an in-depth study of the major fields of sheet metal forming, cutting, hydroforming and solid forming. A large number of relevant calculations offers state of the art solutions in the field of metal forming technology. In presenting tech nical explanations, particular emphasis was placed on easily under standable graphic visualization. All illustrations and diagrams were compiled using a standardized system of functionally oriented color codes with a view to aiding the reader's understanding.

Encyclopedia of Materials: Metals and Alloys

Download Encyclopedia of Materials: Metals and Alloys PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 0128197331
Total Pages : 0 pages
Book Rating : 4.1/5 (281 download)

DOWNLOAD NOW!


Book Synopsis Encyclopedia of Materials: Metals and Alloys by :

Download or read book Encyclopedia of Materials: Metals and Alloys written by and published by Elsevier. This book was released on 2021-09-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern metallurgy is a fascinating field of research, full of discoveries, commercial opportunities and industrial utility. Encyclopedia of Materials: Metals and Alloys is a new, multidisciplinary reference work offering a comprehensive coverage of this exciting area, and consolidating research activities in all experimental and theoretical aspects of metallic materials, intermetallic compounds, alloys, blends and composites. Key focus is on those aspects of the science of metals concerned with their manufacturing, processing and fabrication, the relationship between the macro/micro/nanostructures and properties (mechanical, chemical, electrical, electrochemical, magnetic and optical), industrial application, surface modification and functionalization of metals – and, importantly, resource and supply chain issues, and life-cycle and sustainability practices. This title provides users with a single and unique reference source, incorporating elements from many different disciplines. An invaluable addition to any reference library of engineers, chemists and physicists, both from industry and academia. Comprehensive and accessible - offers users a ‘one stop’ comprehensive resource, providing contemporary reviews of current metallurgy research, and an insight into the future direction of the field Clearly structured - meticulously organized, chapters are split into 13 sections on key topics and clearly cross-referenced to allow students, researchers, and professionals to find relevant information quickly and easily Multidisciplinary - chapters written by academics and practitioners from various fields and regions ensure that the knowledge within is easily understood by, and applicable to, a large audience Contemporary content - emphasis is given to clean energy, green transport, healthcare and next-generation manufacturing

Metals for Biomedical Devices

Download Metals for Biomedical Devices PDF Online Free

Author :
Publisher : Woodhead Publishing
ISBN 13 : 0081026676
Total Pages : 596 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!


Book Synopsis Metals for Biomedical Devices by : Mitsuo Niinomi

Download or read book Metals for Biomedical Devices written by Mitsuo Niinomi and published by Woodhead Publishing. This book was released on 2019-05-17 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals for Biomedical Devices, Second Edition, has been fully updated and builds upon the success of its first edition, discussing the latest techniques in metal processing methods and the behavior of this important material. Initial chapters review the current status and selection of metals for biomedical devices. Subsequent chapters cover mechanical behavior, degradation and testing, corrosion, wear testing and biocompatibility, the processing of metals for biomedical applications, including topics such as forging metals and alloys, surface treatment, coatings and sterilization. Chapters in the final section discuss the clinical applications of metals, such as cardiovascular, orthopedic and new generation biomaterials. With its distinguished editor and team of expert contributors, this book is a standard reference for materials scientists, researchers and engineers working in the medical devices industry and academia. Reviews the latest techniques in metal processing methods, including surface treatment and sterilization Examines metal selection for biomedical devices, considering the biocompatibility of various metals Assesses mechanical behavior and the testing of metals, featuring the latest information on corrosion, fatigue and wear Discusses biodegradable alloys, including a new section on Mg alloys Includes a new section that discusses the use of additive manufacturing in the production of medical devices

Applied Metal Forming

Download Applied Metal Forming PDF Online Free

Author :
Publisher : Cambridge University Press
ISBN 13 : 1316175413
Total Pages : 477 pages
Book Rating : 4.3/5 (161 download)

DOWNLOAD NOW!


Book Synopsis Applied Metal Forming by : Henry S. Valberg

Download or read book Applied Metal Forming written by Henry S. Valberg and published by Cambridge University Press. This book was released on 2010-03-31 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Metal Forming: Including FEM Analysis describes metal forming theory and how experimental techniques can be used to study any metal forming operation with great accuracy. For each primary class of processes, such as forging, rolling, extrusion, wiredrawing, and sheet-metal forming, it explains how FEA (Finite Element Analysis) can be applied with great precision to characterize the forming condition and in this way optimize the processes. FEA has made it possible to build very realistic FEM-models of any metal forming process, including complex three-dimensional forming operations, in which complex products are shaped by complex dies. Thus, using FEA it is now possible to visualize any metal forming process and to study strain, stresses, and other forming conditions inside the parts being manufactured as they develop throughout the process.

MANUFACTURING PROCESSES

Download MANUFACTURING PROCESSES PDF Online Free

Author :
Publisher : PHI Learning Pvt. Ltd.
ISBN 13 : 8120340825
Total Pages : 1034 pages
Book Rating : 4.1/5 (23 download)

DOWNLOAD NOW!


Book Synopsis MANUFACTURING PROCESSES by : J. P. KAUSHISH

Download or read book MANUFACTURING PROCESSES written by J. P. KAUSHISH and published by PHI Learning Pvt. Ltd.. This book was released on 2010-06-12 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised and updated second edition of this book gives an in-depth presentation of the basic principles and operational procedures of general manufacturing processes. It aims at assisting the students in developing an understanding of the important and often complex interrelationship among various technical and economical factors involved in manufacturing. The book begins with a discussion on material properties while laying emphasis on the influence of materials and processing parameters in understanding manufacturing processes and operations. This is followed by a detailed description of various manufacturing processes commonly used in the industry. With several revisions and the addition of four new chapters, the new edition also includes a detailed discussion on mechanics of metal cutting, features and working of machine tools, design of molds and gating systems for proper filling and cooling of castings. Besides, the new edition provides the basics of solid-state welding processes, weldability, heat in welding, residual stresses and testing of weldments and also of non-conventional machining methods, automation and transfer machining, machining centres, robotics, manufacturing of gears, threads and jigs and fixtures. The book is intended for undergraduate students of mechanical engineering, production engineering and industrial engineering. The diploma students and those preparing for AMIE, Indian Engineering Services and other competitive examinations will also find the book highly useful. New to This Edition : Includes four new chapters Non-conventional Machining Methods; Automation: Transfer Machining, Machining Centres and Robotics; Manufacturing Gears and Threads; and Jigs and Fixtures to meet the course requirements. Offers a good number of worked-out examples to help the students in mastering the concepts of the various manufacturing processes. Provides objective-type questions drawn from various competitive examinations such as Indian Engineering Services and GATE.

Metal Forming

Download Metal Forming PDF Online Free

Author :
Publisher : Academic Press
ISBN 13 : 0323852564
Total Pages : 430 pages
Book Rating : 4.3/5 (238 download)

DOWNLOAD NOW!


Book Synopsis Metal Forming by : Chris V. Nielsen

Download or read book Metal Forming written by Chris V. Nielsen and published by Academic Press. This book was released on 2021-02-12 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Forming: Formability, Simulation, and Tool Design focuses on metal formability, finite element modeling, and tool design, providing readers with an integrated overview of the theory, experimentation and practice of metal forming. The book includes formability and finite element topics, including insights on plastic instability, necking, nucleation and coalescence of voids. Chapters discuss the finite element method, including its accuracy, reliability and validity and finite element flow formulation, helping readers understand finite element formulations, iterative solution methods, friction and contact between objects, and other factors. The book's final sections discuss tool design for cold, warm and hot forming processes. Examples of tools, design guidelines, and information related to tool materials, lubricants, finishes, and tool failure are included as well. Provides fundamental, integrated knowledge on metal formability, finite element topics and tool design Outlines user perspectives on accuracy, reliability and validity of finite element modeling Discusses examples of tools, their design guidelines, tool lubricants, and tool failure Considers the role played by stress triaxiality and shear and introduces uncoupled ductile damage criteria Includes applications, worked examples and detailed techniques

Forging, Stamping, Heat Treating

Download Forging, Stamping, Heat Treating PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 906 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!


Book Synopsis Forging, Stamping, Heat Treating by :

Download or read book Forging, Stamping, Heat Treating written by and published by . This book was released on 1928 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:

The Backyard Bowyer

Download The Backyard Bowyer PDF Online Free

Author :
Publisher : NickTomihama
ISBN 13 : 0983248109
Total Pages : 196 pages
Book Rating : 4.9/5 (832 download)

DOWNLOAD NOW!


Book Synopsis The Backyard Bowyer by : Nicholas Tomihama

Download or read book The Backyard Bowyer written by Nicholas Tomihama and published by NickTomihama. This book was released on 2011-03-10 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: With over 300 step-by-step pictures, the Backyard Bowyer is geared for the beginning bowyer, backyard hobbyist, and anyone who has ever pondered building a wooden bow. Easy to read and follow steps go down to even the smallest detail in the design and construction of basic archery bows. Learn to craft fine wooden bows without huge investment in equipment and materials, and without being bound by location and limited workspace. Learn to construct: A classic target flat bow, an English Longbow suitable for hunting, and even your own strings and arrows for traditional and primitive archery.

Tribology and Surface Engineering for Industrial Applications

Download Tribology and Surface Engineering for Industrial Applications PDF Online Free

Author :
Publisher : CRC Press
ISBN 13 : 1000475891
Total Pages : 265 pages
Book Rating : 4.0/5 (4 download)

DOWNLOAD NOW!


Book Synopsis Tribology and Surface Engineering for Industrial Applications by : Catalin I. Pruncu

Download or read book Tribology and Surface Engineering for Industrial Applications written by Catalin I. Pruncu and published by CRC Press. This book was released on 2021-11-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology is a multidisciplinary science that encompasses mechanical engineering, materials science, surface engineering, lubricants, and additives chemistry with tremendous applications. Tribology and Surface Engineering for Industrial Applications discusses the latest in tribology and surface engineering for industrial applications. This book: Offers information on coatings and surface diagnostics Explains a variety of techniques for improved performance Describes applications in automotive, wheel and rail materials, manufacturing, and wind turbines Written for researchers and advanced students, this book encompasses a wide-ranging view of the latest in industrial applications of tribology and surface engineering for a variety of cross-disciplinary applications.

Powder Forging

Download Powder Forging PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 296 pages
Book Rating : 4.:/5 (45 download)

DOWNLOAD NOW!


Book Synopsis Powder Forging by : Howard A. Kuhn

Download or read book Powder Forging written by Howard A. Kuhn and published by . This book was released on 1990 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Experiments in Hot Rolling and Forging of Ductile Cast Iron

Download Experiments in Hot Rolling and Forging of Ductile Cast Iron PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 44 pages
Book Rating : 4.3/5 (91 download)

DOWNLOAD NOW!


Book Synopsis Experiments in Hot Rolling and Forging of Ductile Cast Iron by : L. A. Neumeier

Download or read book Experiments in Hot Rolling and Forging of Ductile Cast Iron written by L. A. Neumeier and published by . This book was released on 1980 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Forging Equipment, Materials, and Practices

Download Forging Equipment, Materials, and Practices PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 512 pages
Book Rating : 4.:/5 (89 download)

DOWNLOAD NOW!


Book Synopsis Forging Equipment, Materials, and Practices by : Taylan Altan

Download or read book Forging Equipment, Materials, and Practices written by Taylan Altan and published by . This book was released on 1973 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook provides design engineers with up-to-date information about the many aspects of forging including descriptions of important developments made more recently by industry and/or government. The handbook describes suitable measures for in-process quality control and quality assurance, summarizes relationships between forging practices and important mechanical properties and compares various forging devices to aid in equipment selection. Attention is also given to describing practices for relatively new materials and emerging forging practices. (Modified author abstract).

Manufacturing Processes 4

Download Manufacturing Processes 4 PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 3642367720
Total Pages : 516 pages
Book Rating : 4.6/5 (423 download)

DOWNLOAD NOW!


Book Synopsis Manufacturing Processes 4 by : Fritz Klocke

Download or read book Manufacturing Processes 4 written by Fritz Klocke and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential information on metal forming, utilizing a practical distinction between bulk and sheet metal forming. In the field of bulk forming, it examines processes of cold, warm and hot bulk forming, as well as rolling and a new addition, the process of thixoforming. As for the field of sheet metal working, on the one hand it deals with sheet metal forming processes (deep drawing, flange forming, stretch drawing, metal spinning and bending). In terms of special processes, the chapters on internal high-pressure forming and high rate forming have been revised and refined. On the other, the book elucidates and presents the state of the art in sheet metal separation processes (shearing and fineblanking). Furthermore, joining by forming has been added to the new edition as a new chapter describing mechanical methods for joining sheet metals. The new chapter “Basic Principles” addresses both sheet metal and bulk forming, in addition to metal physics, plastomechanics and computational basics; these points are complemented by the newly added topics of metallography and analysis, materials and processes for testing, and tribology and lubrication techniques. The chapters are supplemented by an in-depth description of modern numeric methods such as the finite element method. All chapters have been updated and revised for the new edition, and many practical examples from modern manufacturing processes have been added.