Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Catalytic Partial Oxidation Of Methane To Synthesis Gas Over Pt Mgo Catalysts
Download Catalytic Partial Oxidation Of Methane To Synthesis Gas Over Pt Mgo Catalysts full books in PDF, epub, and Kindle. Read online Catalytic Partial Oxidation Of Methane To Synthesis Gas Over Pt Mgo Catalysts ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Natural Gas Conversion V by : A. Parmaliana
Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.
Book Synopsis Catalyst Handbook by : Martyn V. Twigg
Download or read book Catalyst Handbook written by Martyn V. Twigg and published by Routledge. This book was released on 2018-12-19 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between theory and practice. It provides fundamental information on heterogeneous catalysis and the practicalities of the catalysts and processes used in producing ammonia, hydrogen and methanol via hydrocarbon steam reforming. It also covers the oxidation reactions in making formaldehyde from methanol, nitric acid from ammonia and sulphuric acid from sulphur dioxide. Designed for use in the chemical industry and by those in teaching, research and the study of industrial catalysts and catalytic processes. Students will also find this book extremely useful for obtaining practical information not available in more conventional textbooks.
Book Synopsis Heterogeneous Catalysis in Industrial Practice by : Charles N. Satterfield
Download or read book Heterogeneous Catalysis in Industrial Practice written by Charles N. Satterfield and published by Krieger Publishing Company. This book was released on 1996 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blending theory and practice, this text provides the information needed to work with solid catalysts in the laboratory, pilot plant or commercial installation. This revised and expanded edition incorporates recent theories and industrial applications.
Book Synopsis Kinetics of Chemical Reactions by : Guy B. Marin
Download or read book Kinetics of Chemical Reactions written by Guy B. Marin and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second, extended and updated edition presents the current state of kinetics of chemical reactions, combining basic knowledge with results recently obtained at the frontier of science. Special attention is paid to the problem of the chemical reaction complexity with theoretical and methodological concepts illustrated throughout by numerous examples taken from heterogeneous catalysis combustion and enzyme processes. Of great interest to graduate students in both chemistry and chemical engineering.
Book Synopsis Plasma Catalysis by : Annemie Bogaerts
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.
Book Synopsis Advances in Synthesis Gas: Methods, Technologies and Applications by : Mohammad Reza Rahimpour
Download or read book Advances in Synthesis Gas: Methods, Technologies and Applications written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2022-10-18 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Production and Preparation is a collection of various chapters concerning many aspects of syngas production technologies, including common methods like gasification, steam/dry/autothermal reforming, membrane technology, etc., along with novel methods like plasma technology, micro-reactors, electrolysis processes as well as photocatalytic systems. In addition, different sources for producing syngas, including oil, crude oil, heavy oil, microalgae, black liquor, tar and bitumen, as well as municipal, agricultural, food, plastic, wood and cardboard wastes are described in detail. - Introduces syngas characteristics and its properties - Describes various methods and technologies for producing syngas - Discusses syngas production from different roots and feedstocks
Download or read book Biofuels written by Krzysztof Biernat and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the current state of knowledge in the field of biofuels, presented by selected research centers from around the world. Biogas from waste production process and areas of application of biomethane were characterized. Also, possibilities of applications of wastes from fruit bunch of oil palm tree and high biomass/bagasse from sorghum and Bermuda grass for second-generation bioethanol were presented. Processes and mechanisms of biodiesel production, including the review of catalytic transesterification process, and careful analysis of kinetics, including bioreactor system for algae breeding, were widely analyzed. Problem of emissivity of NOx from engines fueled by B20 fuel was characterized. The closing chapters deal with the assessment of the potential of biofuels in Turkey, the components of refinery systems for production of biodegradable plastics from biomass. Also, a chapter concerning the environmental conditions of synthesis gas production as a universal raw material for the production of alternative fuels was also added.
Book Synopsis Methane and its Derivatives by : Sunggyu Lee
Download or read book Methane and its Derivatives written by Sunggyu Lee and published by CRC Press. This book was released on 1996-10-18 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Covers the chemistry, process chemistry, technology, engineering, and economics of methane conversion, including its environmental impact and commercial exploitation. Begins with methane's availability and increasing importance as an environmentally acceptable natural resource alternative and feedstock."
Book Synopsis Natural Gas Conversion VI by : T.H. Fleisch
Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.
Book Synopsis Small-Scale Gas to Liquid Fuel Synthesis by : Nick Kanellopoulos
Download or read book Small-Scale Gas to Liquid Fuel Synthesis written by Nick Kanellopoulos and published by CRC Press. This book was released on 2015-02-23 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that a large fraction of natural gas reserves are found in locations from where transport is not economical. If these isolated natural gas reserves could be converted to synthetic fuels, they would generate around 250 billion barrels of synthetic oil-a quantity equal to one-third of the Middle East's proven oil reserves. Small-Scale
Book Synopsis Leading Edge Catalyis Research by : Lawrence P. Bevy
Download or read book Leading Edge Catalyis Research written by Lawrence P. Bevy and published by Nova Publishers. This book was released on 2005 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical or biological process whereby the presence of an external compound, a catalyst, serves as an agent to cause a chemical reaction to occur or to improve reaction performance without altering the external compound. Catalysis is a very important process from an industrial point of view since the production of most industrially important chemicals involve catalysis. Catalysis research is a major field in applied science, and involves many fields of chemistry and physics. The new book brings together leading research in this vibrant field.
Book Synopsis Hydrogen and Syngas Production and Purification Technologies by : Ke Liu
Download or read book Hydrogen and Syngas Production and Purification Technologies written by Ke Liu and published by John Wiley & Sons. This book was released on 2010-01-07 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the timely topic of fuel cells and hydrogen-based energy from its fundamentals to practical applications Serves as a resource for practicing researchers and as a text in graduate-level programs Tackles crucial aspects in light of the new directions in the energy industry, in particular how to integrate fuel processing into contemporary systems like nuclear and gas power plants Includes homework-style problems
Book Synopsis Fuel Cells: Technologies for Fuel Processing by : Dushyant Shekhawat
Download or read book Fuel Cells: Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations
Book Synopsis Nanostructured Catalysts by : Christian Hess
Download or read book Nanostructured Catalysts written by Christian Hess and published by Royal Society of Chemistry. This book was released on 2011-07-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive up-to-date summary of the existing information on the structural/electronic properties, chemistry and catalytic properties of vanadium and molybdenum containing catalysts. It discusses the importance of nanoscience for the controlled synthesis of catalysts with functional properties and introduces the necessary background regarding surface properties and preparation techniques, leading from a textbook level to the current state of knowledge. Then follows an extensive survey and analysis of the existing open and patent literature - an essential knowledge source for the development of the new generation of partial oxidation catalysts. Important examples from current research on partial oxidation reactions are reviewed from experts in the field. The next chapter discusses the importance of 2- and 3-dimensional model systems for a fundamental understanding of the structure of transition metal oxide catalysts and its correlation to reactivity. Finally, an outlook on research opportunities within the area of partial oxidation reactions is presented.
Book Synopsis Handbook Of Advanced Methods And Processes In Oxidation Catalysis: From Laboratory To Industry by : Daniel Duprez
Download or read book Handbook Of Advanced Methods And Processes In Oxidation Catalysis: From Laboratory To Industry written by Daniel Duprez and published by World Scientific. This book was released on 2014-07-24 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.
Book Synopsis Metal Oxides in Heterogeneous Catalysis by : Jacques C. Vedrine
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
