Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Beam Loss And Collimation In The Fermilab 16 Gev Proton Driver
Download Beam Loss And Collimation In The Fermilab 16 Gev Proton Driver full books in PDF, epub, and Kindle. Read online Beam Loss And Collimation In The Fermilab 16 Gev Proton Driver ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver by :
Download or read book Beam Loss and Collimation in the Fermilab 16 GeV Proton Driver written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A high beam power of 1.15 MW in the proposed 16-GeV Proton Driver [1] implies serious constraints on beam losses in the machine. The main concerns are the hands-on maintenance and ground-water activation. Only with a very efficient beam collimation system can one reduce uncontrolled beam losses to an allowable level. The results on tolerable beam loss and on a proposed beam collimation system are summarized in this paper. A multi-turn particle tracking in the accelerator defined by all lattice components with their realistic strengths and aperture restrictions, and halo interactions with the collimators is done with the STRUCT code [2]. Full-scale Monte Carlo hadronic and electromagnetic shower simulations in the lattice elements, shielding, tunnel and surrounding dirt with realistic geometry, materials and magnetic field are done with the MARS14 code [3]. It is shown that the proposed 3-stage collimation system, allows localization of more than 99% of beamloss in a special straight section. Beam loss in the rest of the accelerator is 0.2 W/m on average.
Book Synopsis Beam Collimation System for a 16 GeV Proton Driver by :
Download or read book Beam Collimation System for a 16 GeV Proton Driver written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: It is shown that with the appropriate lattice and collimation design, one can control beam loss in the 16 GeV Fermilab Proton Driver. Based on detailed Monte-Carlo simulations, a 3-stage collimation system is proposed which consists of primary, secondary and supplementary collimators located in a special 60 m long injection section along with a painting system. It allows localization of more than 99% of beam loss to this section with only a 0.3 W/m (on average) beam loss rate in the rest of the machine. As a result, beam loss and induced radiation effects in lattice elements can be reduced to levels which are defined as acceptable.
Book Synopsis Beam Collimation and Shielding in the Fermilab Proton Driver by :
Download or read book Beam Collimation and Shielding in the Fermilab Proton Driver written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A high beam power in the proposed Fermilab Proton Drivers--1.2 MW in 16-GeV PD-I and 0.48 MW in 8-GeV PD-II--implies serious constraints on beam losses in these machines. Only with a very efficient beam collimation system can one reduce uncontrolled beam losses in the machine to an allowable level. The entire complex must be well shielded to allow acceptable hands-on maintenance conditions in the tunnel and a non-controlled access to the outside shielding at normal operation and accidental beam loss. Collimation and shielding performances are calculated and compared for both Proton Drivers.
Book Synopsis Radiation Shielding of the Fermilab 16 GeV Proton Driver by :
Download or read book Radiation Shielding of the Fermilab 16 GeV Proton Driver written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The radiation transport analysis in the proposed Fermi-lab 1.2 MWProton Driver (PD) [1] is fundamentally important because of the impact on machine performance, conventional facility design, maintenance operations, and related costs. The strategy adopted in the PD design is that the beam losses in the machine are localized and controlled as much as possible via the dedicated beam collimation system, with a high loss rate localized in that section and drastically lower uncontrolled beam loss rate in the rest of the lattice. Results of thorough Monte Carlo calculations of prompt and residual radiation in and around the PD components are presented for realistic assumptions and geometry under normal operation and accidental conditions. This allowed one to conduct shielding design and analysis to meet regulatory requirements [2] for external shielding, hands-on maintenance and ground-water activation.
Book Synopsis High Intensity and High Brightness Hadron Beams by : Weiren Chou
Download or read book High Intensity and High Brightness Hadron Beams written by Weiren Chou and published by American Institute of Physics. This book was released on 2002-11-20 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 20th ICFA Advanced Beam Dynamics Workshop took place from April 8 to 12, 2002 at Fermilab, co-sponsored by Fermilab and KEK. The theme of this workshop was "High Intensity and High Brightness Hadron Beams". The workshop covered a broad range of topics associated with such beams, including reviews of the performance of existing high-intensity hadron machines, overviews of planned high-intensity hadron sources and projects, presentations on accelerator physics issues, technical systems designs, and applications of these beams in high energy physics, nuclear physics, heavy ion fusion, medicine, industry, and other fields.
Book Synopsis Beam Loss, Residual Radiation, and Collimation and Shielding in the Fermilab Booster by :
Download or read book Beam Loss, Residual Radiation, and Collimation and Shielding in the Fermilab Booster written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: During its 30 years of operation, the Fermilab Booster has served only as an injector for the relatively low repetition rate proton accelerator complex. With the construction of an 8 GeV target station for the 5 Hz MiniBooNE neutrino beam and rapid multi-batch injection into the Main Injector for the NuMI experiment, the demand for Booster protons will increase dramatically over the next few years. This implies serious constraints on beam losses in the machine. A collimation system and shielding design based on realistic Monte Carlo simulations are presented. A two-stage beam collimation system with local shielding has been designed. It provides adequate protection of the Booster components and environment by localizing operational losses. This loss control is a key to the entire future Fermilab high energy physics program.
Book Synopsis Fermilab Booster Operational Status by :
Download or read book Fermilab Booster Operational Status written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Beam loss reduction and control challenges confronting the Fermilab Booster are presented in the context of the current operational status. In Summer 2002 the programmatic demand for 8 GeV protons will increase to 5E20/year. This is an order of magnitude above recent high rates and nearly as many protons as the machine has produced in its entire 30-year lifetime. Catastrophic radiation damage to accelerator components must be avoided, maintenance in an elevated residual radiation environment must be addressed, and operation within a tight safety envelope must be conducted to limit prompt radiation in the buildings and grounds around the Booster. Diagnostic and performance tracking improvements, enhanced orbit control, and a beam loss collimation/localization system are essential elements in the approach to achieving the expected level of performance and are described here.
Download or read book Proton Driver written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past year a team in the Beams Division has been working on the proton driver for Fermilab. Significant progresses have been made to reach the Phase 1 design goals. A Phase 1 proton driver consists of a modest improvement of the linac front end, a new 16 GeV synchrotron in a new tunnel and two new beam lines (400 MeV and 16 GeV). It meets the needs of a neutrino factory and can provide a 1.2 MW proton beam with 3 ns bunch length. It also allows an upgrade path to a beam power of 4 MW and bunch length of 1 ns, which will be required by a future muon collider. In addition to serve a neutrino factory and/or a muon collider, the system would also serve as a complete functional replacement for the Fermilab Booster, providing upgraded capabilities in the future for the programs that the Booster would otherwise have served. New physics programs based on the stand-alone capabilities of the proton driver as an intense source of proton beams would also be enabled. The Fermilab management has scheduled an internal technical review of the proton driver design study on April 17--19, 2000. A complete design report will be due early 2001.
Book Synopsis Simulations of the Fermilab Recycler for Losses and Collimation by :
Download or read book Simulations of the Fermilab Recycler for Losses and Collimation written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fermilab has recently completed an upgrade to the com- plex with the goal of delivering 700 kW of beam power as 120 GeV protons to the NuMI target. A major part of boost- ing beam power is to shorten the beam cycle by accumulating up to 12 bunches of 0.5 × 10 11 protons in the Recycler ring through slip-stacking during the Main Injector ramp. This introduces much higher intensities into the Recycler than it has had before. Meeting radiation safety requirements with high intensity operations requires understanding the ef- fects of space charge induced tune spreads and resulting halo formation, and aperture restrictions in the real machine to de- velop a collimation strategy. We report on initial simulations of slip-stacking in the Recycler performed with Synergia.
Book Synopsis Fermilab Booster Beam Collimation and Shielding by :
Download or read book Fermilab Booster Beam Collimation and Shielding written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The beam power in the upgraded Booster at 8 GeV and 10 Hz will be 64 kW. Beam loss can result in high radiation loads in the ring. The purpose of a new beam halo cleaning system is to localize proton losses in specially shielded regions. Calculations show that this 2-stage collimation system will localize about 99% of beam loss in straight sections 6 and 7 and immediately downstream. Beam loss in the rest of the machine will be on average 0.1W/m. Local shielding will provide tolerable prompt and residual radiation levels in the tunnel, above the tunnel at the surface and in the sump water. Results of thorough MARS calculations are presented for a new design which includes shielding integrated with the collimators, motors and controls ensuring a high performance and facilitating maintenance. First measurements of the collimation efficiency are presented.
Book Synopsis Theory and Design of Charged Particle Beams by : Martin Reiser
Download or read book Theory and Design of Charged Particle Beams written by Martin Reiser and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although particle accelerators are the book's main thrust, it offers a broad synoptic description of beams which applies to a wide range of other devices such as low-energy focusing and transport systems and high-power microwave sources. Develops material from first principles, basic equations and theorems in a systematic way. Assumptions and approximations are clearly indicated. Discusses underlying physics and validity of theoretical relationships, design formulas and scaling laws. Features a significant amount of recent work including image effects and the Boltzmann line charge density profiles in bunched beams.
Book Synopsis Operational Experience with Beam Loss, Shielding and Residual Radiation in the Fermilab Proton Source by :
Download or read book Operational Experience with Beam Loss, Shielding and Residual Radiation in the Fermilab Proton Source written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A report on beam loss, radiation shielding, and residual radiation experiences and status in the Fermilab Linac and Booster is presented. Historically, the Linac/Booster system has served only as an injector for the relatively low repetition rate Main Ring synchrotron. With the construction of an 8 GeV target station for the 5 Hz MiniBooNE neutrino beam and rapid multi-batch injection into the Main Injector for the NUMI experiment, the demand for Booster protons will increase dramatically over the next few years. Booster beam loss reduction and control are key to the entire future Fermilab high energy physics program.
Book Synopsis Collimation System Design for Beam Loss Localization with Slipstacking Injection in the Fermilab Main Injector by :
Download or read book Collimation System Design for Beam Loss Localization with Slipstacking Injection in the Fermilab Main Injector written by and published by . This book was released on 2007 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results of modeling with the 3-D STRUCT and MARS15 codes of beam loss localization and related radiation effects are presented for the slipstacking injection to the Fermilab Main Injector. Simulations of proton beam loss are done using multi-turn tracking with realistic accelerator apertures, nonlinear fields in the accelerator magnets and time function of the RF manipulations to explain the results of beam loss measurements. The collimation system consists of one primary and four secondary collimators. It intercepts a beam power of 1.6 kW at a scraping rate of 5% of 5.5E+13 ppp, with a beam loss rate in the ring outside the collimation region of 1 W/m or less. Based on thorough energy deposition and radiation modeling, a corresponding collimator design was developed that satisfies all the radiation and engineering constraints.
Download or read book The Proton Driver Design Study written by and published by . This book was released on 2001 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a 1997 summer study, a team led by Steve Holmes formulated a development plan for the Fermilab proton source and described the results in TM-2021. Subsequently, at the end of 1998, a task group was formed to prepare a detailed design of a high intensity facility called the Proton Driver to replace the Fermilab Booster. In the past two years the design effort has attracted more than fifty participants, mostly from the Beams Division. Physicists and engineers from the Technical Division and FESS as well as other institutions, including the Illinois Institute of Technology (IIT), Stanford University, University of Hawaii, CERN in Switzerland, Rutherford Appleton Laboratory in England and the IHEP in Russia also contributed heavily. The results of that effort are summarized in this document describing the design of a 16 GeV synchrotron, two new beam transport lines (a 400 MeV injection line and a 12/16 GeV extraction line), and related improvements to the present negative ion source and the 400 MeV Linac. A construction cost estimate is presented in Appendix A.
Book Synopsis Space Charge and Beam Stability Issues of the Fermilab Proton Driver in Phase I. by :
Download or read book Space Charge and Beam Stability Issues of the Fermilab Proton Driver in Phase I. written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues concerning beam stability of the proposed Fermilab Proton Driver are studied in its Phase I. Although the betatron tune shifts are dominated by space charge, these shifts are less than 0.25 and will therefore not drive the symmetric and antisymmetric modes of the beam envelope into instability. The longitudinal space charge force is large and inductive inserts may be needed to compensate for the distortion of the rf potential. Although the longitudinal impedance is space charge dominated, it will not drive any microwave instability, unless the real part of the impedance coming from the inductive inserts and wall resistivity of the beam tube are large enough. The design of the beam tube is therefore very important in order to limit the flow of eddy current and keep wall resistivity low. The transverse impedance is also space charge dominated. With the Proton Driver operated at an imaginary transition gamma, however, Landau damping will never be canceled and beam stability can be maintained with negative chromaticities.
Book Synopsis Energy Deposition Issues at 8 GeV H- Beam Collimation and Injection to the Fermilab Main Injector by : N. V. Mokhov
Download or read book Energy Deposition Issues at 8 GeV H- Beam Collimation and Injection to the Fermilab Main Injector written by N. V. Mokhov and published by . This book was released on 2005 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy deposition and radiation issues at 8 GeV h{sup -} beam collimation in the beam transfer line and at stripping injection to the Fermilab Main Injector (MI) are analyzed. Detailed calculations with the STRUCT [1] and MARS15 [2] codes are performed on heating of collimators and stripping foils, as well as on accelerator elements radioactivation at normal operation. Extraction of the unstripped part of the beam to the external beam dump and loss of the excited-state H{sup 0} atoms in MI are also studied.
Book Synopsis Error-Induced Beam Degradation in Fermilab's Accelerators by :
Download or read book Error-Induced Beam Degradation in Fermilab's Accelerators written by and published by . This book was released on 2008 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Part I, three independent models of Fermilab's Booster synchrotron are presented. All three models are constructed to investigate and explore the effects of unavoidable machine errors on a proton beam under the influence of space-charge effects. The first is a stochastic noise model. Electric current fluctuations arising from power supplies are ubiquitous and unavoidable and are a source of instabilities in accelerators of all types. A new noise module for generating the Ornstein-Uhlenbeck (O-U) stochastic noise is first created and incorporated into the existing Object-oriented Ring Beam Injection and Tracking (ORBIT-FNAL) package. After being convinced with a preliminary model that the noise, particularly non-white noise, does matter to beam quality, we proceeded to measure directly current ripples and common-mode voltages from all four Gradient Magnet Power Supplies (GMPS). Then, the current signals are Fourier-analyzed. Based upon the power spectra of current signals, we tune up the Ornstein-Uhlnbeck noise model. As a result, we are able to closely match the frequency spectra between current measurements and the modeled O-U stochastic noise. The stochastic noise modeled upon measurements is applied to the Booster beam in the presence of the full space-charge effects. This noise model, accompanied by a suite of beam diagnostic calculations, manifests that the stochastic noise, impinging upon the beam and coupled to the space-charge effects, can substantially enhance the beam degradation process throughout the injection period. The second model is a magnet misalignment model. It is the first time to utilize the latest beamline survey data for building a magnet-by-magnet misalignment model. Given as-found survey fiducial coordinates, we calculate all types of magnet alignment errors (station error, pitch, yaw, roll, twists, et cetera) are implemented in the model. We then follow up with statistical analysis to understand how each type of alignment errors are currently distributed around the Booster ring. The ORBIT-FNAL simulations with space charge included show that rolled magnets, in particular, have substantial effects on the Booster beam. This survey-data-based misalignment model can predict how much improvement in machine performance can be achieved if prioritized or selected realignment work is done. In other words, this model can help us investigate different realignment scenarios for the Booster. In addition, by calculating average angular kicks from all misaligned magnets, we expect this misalignment model to serve as guidelines for resetting the strengths of corrector magnets. The third model for the Booster is a time-structured multi-turn injection model. Microbunch-injection scenarios with different time structures are explored in the presence of longitudinal space-charge force. Due to the radio-frequency (RF) bucket mismatch between the Booster and the 400-MeV transferline, RF-phase offsets can be parasitically introduced during the injection process. Using the microbunch multiturn injection, we carry out ESME-ORBIT-combined simulations. This combined simulation allows us to investigate realistic charge-density distribution under full space-charge effects. The growth rates of transverse emittances turned out to be 20 % in both planes. This microbunch-injection scenarios is also applicable to the future 8-GeV Superconducting Linac Proton Driver and the upgraded Main Injector at Fermilab. In Part II, the feasibility of momentum-stacking method of proton beams is investigated. When the Run2 collider program at Fermilab comes to an end around year 2009, the present antiproton source can be available for other purposes. One possible application is to convert the antiproton accumulator to a proton accumulator, so that the beam power from the Main Injector could be enhanced by a factor of four. Through adiabatic processes and optimized parameters of synchrotron motion, we demonstrate with an aid of the ESME code that u...
