Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Asme 2013 Heat Transfer Summer Conference Collocated With The Asme 2013 7th International Conference On Energy Sustainability And The Asme 2013 11th International Conference On Fuel Cell Science Engineering And Technology
Download Asme 2013 Heat Transfer Summer Conference Collocated With The Asme 2013 7th International Conference On Energy Sustainability And The Asme 2013 11th International Conference On Fuel Cell Science Engineering And Technology full books in PDF, epub, and Kindle. Read online Asme 2013 Heat Transfer Summer Conference Collocated With The Asme 2013 7th International Conference On Energy Sustainability And The Asme 2013 11th International Conference On Fuel Cell Science Engineering And Technology ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Proceedings of the Future Technologies Conference (FTC) 2019 by : Kohei Arai
Download or read book Proceedings of the Future Technologies Conference (FTC) 2019 written by Kohei Arai and published by Springer Nature. This book was released on 2019-10-12 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art intelligent methods and techniques for solving real-world problems and offers a vision of future research. Featuring 143 papers from the 4th Future Technologies Conference, held in San Francisco, USA, in 2019, it covers a wide range of important topics, including, but not limited to, computing, electronics, artificial intelligence, robotics, security and communications and their applications to the real world. As such, it is an interesting, exciting and inspiring read.
Book Synopsis Phase Change Materials for Heat Transfer by : Hafiz Muhammad Ali
Download or read book Phase Change Materials for Heat Transfer written by Hafiz Muhammad Ali and published by Elsevier. This book was released on 2023-03-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Change Materials for Heat Transfer focuses on how to maximize the heat transfer rate and thermal storage capability of PCMs. Various aspects are covered, including preparation of phase change materials to heat transfer enhancement and characteristics with an emphasis on prominent applications. The book is designed in such a manner to cover the broad definitions, introduction, brief history, preparation techniques, thermophysical properties and heat transfer characteristics with mathematical models, performance-affecting factors and the applications and challenges of PCMs. This handbook will prove invaluable to readers interested in a resource with the latest information in this emerging field. - Provides key heat transfer enhancement and thermophysical properties features for a wide range of phase change materials - Presents detailed parameter selection procedures impacting heat transfer - Reviews available prediction methods for heat transfer and thermophysical properties of phase change material - Includes practical applications of phase change materials for enhanced thermal control - Explores practical challenges and opportunities of phase change materials potential in heat transfer enhancement
Book Synopsis Microbial Electrochemical Technologies by : Makarand M. Ghangrekar
Download or read book Microbial Electrochemical Technologies written by Makarand M. Ghangrekar and published by John Wiley & Sons. This book was released on 2023-11-08 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop guide to the future of sustainable energy production The search for sustainable energy sources powered by renewable, non-fossil fuel resources is one of the great scientific challenges of the era. Microorganisms such as bacteria and algae have been shown to function as the basis of a microbial fuel cell, which can operate independently of an electrical power grid on the basis of renewable feed sources. These fuel cells have shown applications ranging from powering implantable biomedical devices to purifying rural water sources, and many more. Microbial Electrochemical Technologies offers a one-stop shop for researchers and developers of technologies incorporating these microbial fuel cells. Beginning with the fundamental processes involved in microbial energy production and the key components of a bioelectrochemical system (BES), it then surveys the major BES types and crucial aspects of technological development and commercialization. The result is an indispensable introduction to these vital power sources and their myriad applications. Microbial Electrochemical Technologies readers will also find: Detailed treatment of BES types including fuel cells, electrolysis and electrosynthesis cells, and more Discussion of commercialization aspects including modelling, performance analysis, and life cycle assessment An authorial team with decades of combined experience on three continents Microbial Electrochemical Technologies is a useful reference for electrochemists, microbiologists, biotechnologists, and bioengineers.
Book Synopsis Microbial Bioremediation and Multiomics Technologies for Sustainable Development by : Fuad Ameen
Download or read book Microbial Bioremediation and Multiomics Technologies for Sustainable Development written by Fuad Ameen and published by Royal Society of Chemistry. This book was released on 2024-08-02 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together the recent advances in the area of microbial bioremediation with a particular focus on the exciting new field of multiomics technologies.
Book Synopsis Ammonothermal Synthesis and Crystal Growth of Nitrides by : Elke Meissner
Download or read book Ammonothermal Synthesis and Crystal Growth of Nitrides written by Elke Meissner and published by Springer Nature. This book was released on 2021-02-07 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a collection of contributed chapters, delivering a comprehensive overview of topics related to the synthesis and crystal growth of nitride compounds under supercritical ammonia conditions. Focusing on key chemical and technological aspects of ammonothermal synthesis and growth of functional nitride compounds, the book also describes many innovative techniques for in-situ observation and presents new data fundamental for materials synthesis under ammonothermal conditions. With its detailed coverage of many thermodynamic and kinetics aspects, which are necessary for understanding and controlling crystal growth, this contributed volume is the ideal companion to materials chemists and engineers at any point in their journey in this rich and exciting field.
Book Synopsis Novel Developments for Sustainable Hydropower by : Peter Rutschmann
Download or read book Novel Developments for Sustainable Hydropower written by Peter Rutschmann and published by Springer Nature. This book was released on 2022-08-07 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents (selected) new and innovative developments for sustainable and fish-friendly hydropower. It offers unique insights into the challenges, practices and policies of hydropower developments across 8 European countries, providing examples from on-site studies and European-wide analyses. The case studies throughout the book are practical “real-world” examples, which are intended to serve as inspiration for anyone who would like to know more about how solutions for more sustainable hydropower production can be designed and implemented. Hydropower is an important renewable energy source, which, however, can also impact aquatic ecosystems, fish populations and hydro-morphology. EU and national water, environmental and energy legislation strive for sustainable energy and water resource management as well as the protection of important habitats and species. These have an effect on the requirements and decision making processes for hydropower planning, commissioning and operation. With a high variety of measures existing and site-specific conditions as well as national and EU level legal requirements to consider, it can be difficult to determine, what issues to address and which measures to implement.
Book Synopsis Encyclopedia Of Two-phase Heat Transfer And Flow Iv: Modeling Methodologies, Boiling Of Co2, And Micro-two-phase Cooling (A 4-volume Set) by : John R Thome
Download or read book Encyclopedia Of Two-phase Heat Transfer And Flow Iv: Modeling Methodologies, Boiling Of Co2, And Micro-two-phase Cooling (A 4-volume Set) written by John R Thome and published by World Scientific Publishing. This book was released on 2018-05-15 with total page 1353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set IV is a new addition to the previous Sets I, II and III. It contains 23 invited chapters from international specialists on the topics of numerical modeling of pulsating heat pipes and of slug flows with evaporation; lattice Boltzmann modeling of pool boiling; fundamentals of boiling in microchannels and microfin tubes, CO2 and nanofluids; testing and modeling of micro-two-phase cooling systems for electronics; and various special topics (flow separation in microfluidics, two-phase sensors, wetting of anisotropic surfaces, ultra-compact heat exchangers, etc.). The invited authors are leading university researchers and well-known engineers from leading corporate research laboratories (ABB, IBM, Nokia Bell Labs). Numerous 'must read' chapters are also included here for the two-phase community. Set IV constitutes a 'must have' engineering and research reference together with previous Sets I, II and III for thermal engineering researchers and practitioners.
Book Synopsis Gas Turbine Heat Transfer and Cooling Technology, Second Edition by : Je-Chin Han
Download or read book Gas Turbine Heat Transfer and Cooling Technology, Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Book Synopsis Laminar Flow Forced Convection in Ducts by : R. K. Shah
Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.
Book Synopsis Biochar for Environmental Management by : Dr. Johannes Lehmann
Download or read book Biochar for Environmental Management written by Dr. Johannes Lehmann and published by Earthscan. This book was released on 2009 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biochar is the carbon-rich product when biomass (such as wood, manure, or crop residues) is heated in a closed container with little or no available air. It can be used to improve agriculture and the environment in several ways, and its stability in soil and superior nutrient-retention properties make it an ideal soil amendment to increase crop yields. In addition to this, biochar sequestration, in combination with sustainable biomass production, can be carbon-negative and therefore used to actively remove carbon dioxide from the atmosphere, with major implications for mitigation of climate change. Biochar production can also be combined with bioenergy production through the use of the gases that are given off in the pyrolysis process.This book is the first to synthesize the expanding research literature on this topic. The book's interdisciplinary approach, which covers engineering, environmental sciences, agricultural sciences, economics and policy, is a vital tool at this stage of biochar technology development. This comprehensive overview of current knowledge will be of interest to advanced students, researchers and professionals in a wide range of disciplines"--Provided by publisher.
Book Synopsis Best Practices Handbook for the Collection and Use of Solar Resource Data for Solar Energy Applications by : M. Sengupta
Download or read book Best Practices Handbook for the Collection and Use of Solar Resource Data for Solar Energy Applications written by M. Sengupta and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Fluid Mechanics and Turbomachinery by : Bijay K Sultanian
Download or read book Fluid Mechanics and Turbomachinery written by Bijay K Sultanian and published by CRC Press. This book was released on 2021-07-21 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes over 250 solved problems to supplement graduate-level courses in fluid mechanics and turbomachinery. Enables students to practice applying key concepts of fluid mechanics and the governing conservation laws to solve real-world problems. Uses the physics-first approach, allowing for a good understanding of the problem physics and the results obtained. Covers problems on flowpath aerodynamics design. Covers problems on secondary air systems modeling of gas turbines.
Book Synopsis Re-engineering Manufacturing for Sustainability by : Andrew Y. C. Nee
Download or read book Re-engineering Manufacturing for Sustainability written by Andrew Y. C. Nee and published by Springer Science & Business Media. This book was released on 2013-04-08 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing, etc.
Book Synopsis Fuel Cells and Hydrogen Production by : Timothy E. Lipman
Download or read book Fuel Cells and Hydrogen Production written by Timothy E. Lipman and published by Springer. This book was released on 2018-10-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expected end of the “oil age” will lead to increasing focus and reliance on alternative energy conversion devices, among which fuel cells have the potential to play an important role. Not only can phosphoric acid and solid oxide fuel cells already efficiently convert today’s fossil fuels, including methane, into electricity, but other types of fuel cells, such as polymer electrolyte membrane fuel cells, have the potential to become the cornerstones of a possible future hydrogen economy. This handbook offers concise yet comprehensive coverage of the current state of fuel cell research and identifies key areas for future investigation. Internationally renowned specialists provide authoritative introductions to a wide variety of fuel cell types and hydrogen production technologies, and discuss materials and components for these systems. Sustainability and marketing considerations are also covered, including comparisons of fuel cells with alternative technologies.
Book Synopsis Proceedings of International Conference on Thermofluids by : Shripad Revankar
Download or read book Proceedings of International Conference on Thermofluids written by Shripad Revankar and published by Springer Nature. This book was released on 2020-11-21 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected and peer-reviewed proceedings of the International Conference on Thermofluids (KIIT Thermo 2020). It focuses on the latest studies and findings in the areas of fluid dynamics, heat transfer, thermodynamics, and combustion. Some of the topics covered in the book include electronic cooling, HVAC system analysis, inverse heat transfer, combustion, nano-fluids, multiphase flow, high-speed flow, and shock waves. The book includes both experimental and numerical studies along with a few review chapters from experienced researchers, and is expected to lead to new research in this important area. This book is of interest to students, researchers as well as practitioners working in the areas of fluid dynamics, thermodynamics, and combustion.
Book Synopsis Building Industries at Sea - ‘Blue Growth’ and the New Maritime Economy by : Kate Johnson
Download or read book Building Industries at Sea - ‘Blue Growth’ and the New Maritime Economy written by Kate Johnson and published by CRC Press. This book was released on 2022-09-01 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the world there is evidence of mounting interest in marine resources and new maritime industries to create jobs, economic growth and to help in the provision of energy and food security. Expanding populations, insecurity of traditional sources of supply and the effects of climate change add urgency to a perceived need to address and overcome the serious challenges of working in the maritime environment. Four promising areas of activity for ‘Blue Growth’ have been identified at European Union policy level including Aquaculture; Renewable Energy (offshore wind, wave and tide); Seabed Mining; and Blue Biotechnology. Work has started to raise the technological and investment readiness levels (TRLs and IRLs) of these prospective industries drawing on the experience of established maritime industries such as Offshore Oil and Gas; Shipping; Fisheries and Tourism. An accord has to be struck between policy makers and regulators on the one hand, anxious to direct research and business incentives in effective and efficient directions, and developers, investors and businesses on the other, anxious to reduce the risks of such potentially profitable but innovative investments.The EU H2020 MARIBE (Marine Investment for the Blue Economy) funded project was designed to identify the key technical and non-technical challenges facing maritime industries and to place them into the social and economic context of the coastal and ocean economy. MARIBE went on to examine with companies, real projects for the combination of marine industry sectors into multi-use platforms (MUPs). The purpose of this book is to publish the detailed analysis of each prospective and established maritime business sector. Sector experts working to a common template explain what these industries are, how they work, their prospects to create wealth and employment, and where they currently stand in terms of innovation, trends and their lifecycle. The book goes on to describe progress with the changing regulatory and planning regimes in the European Sea Basins including the Caribbean where there are significant European interests. The book includes:• Experienced chapter authors from a truly multidisciplinary team of sector specialisms• First extensive study to compare and contrast traditional Blue Economy with Blue Growth• Complementary to EU and National policies for multi-use of maritime space
Book Synopsis Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing by : Hermann Lödding
Download or read book Advances in Production Management Systems. The Path to Intelligent, Collaborative and Sustainable Manufacturing written by Hermann Lödding and published by Springer. This book was released on 2017-08-28 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 513 and 514 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2017, held in Hamburg, Germany, in September 2017. The 121 revised full papers presented were carefully reviewed and selected from 163 submissions. They are organized in the following topical sections: smart manufacturing system characterization; product and asset life cycle management in smart factories of industry 4.0; cyber-physical (IIoT) technology deployments in smart manufacturing systems; multi-disciplinary collaboration in the development of smart product-service solutions; sustainable human integration in cyber-physical systems: the operator 4.0; intelligent diagnostics and maintenance solutions; operations planning, scheduling and control; supply chain design; production management in food supply chains; factory planning; industrial and other services; operations management in engineer-to-order manufacturing; gamification of complex systems design development; lean and green manufacturing; and eco-efficiency in manufacturing operations.
