Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Analytical Results Of Dwpf Glass Sample Taken During Filling Of Canister S01913
Download Analytical Results Of Dwpf Glass Sample Taken During Filling Of Canister S01913 full books in PDF, epub, and Kindle. Read online Analytical Results Of Dwpf Glass Sample Taken During Filling Of Canister S01913 ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Analytical Results of DWPF Glass Sample Taken During Pouring of Canister S01913 by : C. Bannochie
Download or read book Analytical Results of DWPF Glass Sample Taken During Pouring of Canister S01913 written by C. Bannochie and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 2 (SB2) (Macrobatch 3) in December 2001 as part of Sludge Receipt and Adjustment Tank (SRAT) Batch 208. Macrobatch 3 consists of the contents of Tank 40 and Tank 8 in approximately equal proportions. A glass sample was obtained while pouring Canister S01913 and was sent to the Savannah River National Laboratory (SRNL) Shielded Cells for characterization. This report contains observations of the glass sample, results for the density, the chemical composition, the Product Consistency Test (PCT) and the radionuclide results needed for the Production Record for Canister S01913. The following conclusions are drawn from this work: (1) The glass sample taken during the filling of canister S01913 received at SRNL weighed 33.04 grams and was dark and reflective with no obvious inclusions indicating the glass was homogeneous. (2) The results of the composition for glass sample S01913 are in good agreement ({+-} 15%) with the DWPF SME results for Batch Number 254, the SME Batch that was being fed to the melter when the sample was collected. (3) The calculated WDF was 2.58. (4) Acid dissolution of the glass samples may not have completely dissolved the noble metals rhodium and ruthenium. (5) The PCT results for the glass (normalized boron release of 1.18 g/L) indicate that it is greater than seven standard deviations more durable than the EA glass; thus, the glass meets the waste acceptance criterion for durability. (6) The measured density of the glass was 2.56 {+-} 0.03 g/cm{sup 3}.
Book Synopsis Analytical Results of DWPF Glass Sample Taken During Filling of Canister S01913 by :
Download or read book Analytical Results of DWPF Glass Sample Taken During Filling of Canister S01913 written by and published by . This book was released on 2004 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 2 (SB2) (Macrobatch 3) in December 2001 as part of Sludge Receipt and Adjustment Tank (SRAT) Batch 208. Macrobatch 3 consists of the contents of Tank 40 and Tank 8 in approximately equal proportions. A glass sample was obtained while pouring Canister S01913 and was sent to the Savannah River National Laboratory (SRNL) Shielded Cells for characterization. This report contains observations of the glass sample, results for the density, the chemical composition, the Product Consistency Test (PCT) and the radionuclide results needed for the Production Record for Canister S01913. The as-received glass appeared homogeneous over the entire surface with a dark and reflective luster. The glass sample weighed 33.04 grams. The results of the composition for glass sample S01913 are in good agreement with the DWPF Slurry Mix Evaporator (SME) results for Batch Number 254, the SME Batch that was being fed to the melter when the sample was collected. The PCT results for the glass indicate that it is significantly more durable than the Environmental Assessment (EA) glass with a normalized boron release of 1.18 g/L for the glass and 10.5 g/L measured for the EA glass. Thus, the glass meets the waste acceptance criterion for durability. The measured density of the glass was 2.56 plus or minus 0.03 g/cm3.
Book Synopsis Advances in Materials Science for Environmental and Energy Technologies IV by : Josef Matyas
Download or read book Advances in Materials Science for Environmental and Energy Technologies IV written by Josef Matyas and published by John Wiley & Sons. This book was released on 2015-10-05 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains a collection of 20 papers from the following five 2014 Materials Science and Technology (MS&T'14) symposia: Materials Issues in Nuclear Waste Management in the 21st Century Green Technologies for Materials Manufacturing and Processing V Nanotechnology for Energy, Healthcare and Industry Materials for Processes for CO2 Capture, Conversion, and Sequestration Materials Development for Nuclear Applications and Extreme Environments
Book Synopsis CHARACTERIZATION OF RADIOACTIVE MACROBATCH 4 GLASS BEING PRODUCED BY THE DWPF AT SAVANNAH RIVER SITE. by :
Download or read book CHARACTERIZATION OF RADIOACTIVE MACROBATCH 4 GLASS BEING PRODUCED BY THE DWPF AT SAVANNAH RIVER SITE. written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: At the Savannah River Site (SRS) the Defense Waste Processing Facility (DWPF) has been immobilizing SRS's radioactive high-level waste (HLW) sludge into a borosilicate glass for approximately nine years. Currently the DWPF is immobilizing HLW sludge in Macrobatch 4 (MB4). Each macrobatch is nominally five hundred thousand gallons of HLW and produces nominally five hundred stainless steel canisters two feet in diameter ten feet tall filled with the borosilicate glass. This paper presents results of the characterization of a sample of MB4 glass taken directly from the pour stream of the DWPF melter during the filling of the canister S02312. This canister was the 275th canister filled during immobilizing MB4. The purpose of the sample was to confirm that the leachability of the glass in a standard ASTM test was less than the leachability criterion set forth in the Waste Acceptance Product Specifications (WAPS) for vitrified waste forms for permanent disposal in a Federal geologic repository. The sample was sent to the Savannah River National Laboratory (SRNL) for characterization.
Book Synopsis DWPF Vitrification - Characterization of the Radioactive Glass Being Produced During Immobilization of the Second Batch of High Level Waste Sludge by :
Download or read book DWPF Vitrification - Characterization of the Radioactive Glass Being Produced During Immobilization of the Second Batch of High Level Waste Sludge written by and published by . This book was released on 2001 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: This glass sample was then transported to Savannah River Technology Center's (SRTC) Shielded Cells Facility where it was characterized. The characterization includes determining the density of the glass, its nonradioactive and radioactive composition, its durability in a standard ASTM 1285 leach test, and its microstructure. This paper summarizes the results of that characterization. The paper also compares the composition of the glass to that of a glass sample from Macro Batch 1. Lastly the paper also compares the composition of the Macro Batch 2 glass sample to the composition of a sample prepared from the slurry in the MFT when sample was taken from the pour stream. Detailed results of the characterization are presented in three Department of Energy reports that have been released and are available from either author.
