Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
An Investigation Of The Effect Of Acceleration On The Burning Rate Of Composite Propellants
Download An Investigation Of The Effect Of Acceleration On The Burning Rate Of Composite Propellants full books in PDF, epub, and Kindle. Read online An Investigation Of The Effect Of Acceleration On The Burning Rate Of Composite Propellants ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis An Investigation of the Effect of Acceleration on the Burning Rate of Composite Propellants by :
Download or read book An Investigation of the Effect of Acceleration on the Burning Rate of Composite Propellants written by and published by . This book was released on 1966 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The average burning rates of composite solid rocket propellant were measured in acceleration fields up to 2000 times the standard acceleration of gravity. The acceleration vector was perpendicular to and into the burning surface. Propellant strands were burned in a combustion bomb mounted on a centrifuge, and surge tanks were employed to ensure essentially constant pressure burning at 500, 1000, and 1500 psia. The burning rates of both aluminized and non-aluminized composite propellants were found to depend on acceleration. The effect of acceleration on burning rate was found to depend on the burning rate of the propellant without acceleration, aluminum mass loading, and aluminum mass median particle size. The relative burning rate increase was found to be greater for slow burning propellant than for faster burning propellants. The experimental results are compared to the analytical models proposed by Crowe for aluminized propellants and by Glick for non-aluminized propellants. The results indicate that these models do not adequately predict the observed relative burning rate increase with acceleration, and hence, that more complex modeling will be required to explain the observed acceleration effect. (Author).
Book Synopsis Experimental Investigation of the Effect of Aluminum Size and Loading on the Burning Rate of Solid Propellants Under Acceleration by : G. Burton Northam
Download or read book Experimental Investigation of the Effect of Aluminum Size and Loading on the Burning Rate of Solid Propellants Under Acceleration written by G. Burton Northam and published by . This book was released on 1969 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis An Investigation of the Effect of Acceleration on the Burning Rate of Composite Propellants by : James Bruce Anderson
Download or read book An Investigation of the Effect of Acceleration on the Burning Rate of Composite Propellants written by James Bruce Anderson and published by . This book was released on 1966 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The average burning rates of composite solid rocket propellant were measured in acceleration fields up to 2000 times the standard acceleration of gravity. The acceleration vector was perpendicular to and into the burning surface. Propellant strands were burned in a combustion bomb mounted on a centrifuge, and surge tanks were employed to ensure essentially constant pressure burning at 500, 1000, and 1500 psia. The burning rates of both aluminized and non-aluminized composite propellants were found to depend on acceleration. The effect of acceleration on burning rate was found to depend on the burning rate of the propellant without acceleration, aluminum mass loading, and aluminum mass median particle size. The relative burning rate increase was found to be greater for slow burning propellant than for faster burning propellants. The experimental results are compared to the analytical models proposed by Crowe for aluminized propellants and by Glick for non-aluminized propellants. The results indicate that these models do not adequately predict the observed relative burning rate increase with acceleration, and hence, that more complex modeling will be required to explain the observed acceleration effect. (Author).
Book Synopsis A Study of the Effect of Acceleration on the Burning Rate of Composite Propellants by : Kennerly Wendell Funk
Download or read book A Study of the Effect of Acceleration on the Burning Rate of Composite Propellants written by Kennerly Wendell Funk and published by . This book was released on 1967 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Effects of Propellant Composition Variables on Accleration-induced Burning-rate Augmentation of Solid Propellants by : G. Burton Northam
Download or read book Effects of Propellant Composition Variables on Accleration-induced Burning-rate Augmentation of Solid Propellants written by G. Burton Northam and published by . This book was released on 1972 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis A Study of the Burning Rates of Composite Solid Propellants in Acceleration Fields by : Edward John Sturm
Download or read book A Study of the Burning Rates of Composite Solid Propellants in Acceleration Fields written by Edward John Sturm and published by . This book was released on 1968 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The average burning rates of a series of composite solid propellants were measured in acceleration fields up to 1000 G using a combustion bomb mounted on a centrifuge. The propellants were burned at constant pressures of 500, 1000, and 1500 psia. Specially prepared motors allowed the study of the effect of simultaneous erosive and acceleration induced burning rate increases. The burning rates of both the non-metallized and the majority of the metallized propellants were found to depend on acceleration. The effect of acceleration was found to depend on the basic burning rates of the propellants and the aluminum and oxidizer particle sizes and weight percentages. The burning rates of two very fast burning rate propellants were found to be essentially independent of acceleration. The erosion sensitivity of a propellant was found to decrease with increasing acceleration. A model was developed which successfully correlates the experimental results obtained for the non-metallized propellants. The experimental results for the metallized propellants could not be correlated by either of two models proposed by other investigators. This result indicates that a more complex model is required to explain the observed acceleration effects for metallized propellants. (Author).
Book Synopsis Experimental Investigation of the Effect of Aluminum Size and Loading on the Burning Rate of Solid Propellants Under Acceleration by : G. Burton Northam
Download or read book Experimental Investigation of the Effect of Aluminum Size and Loading on the Burning Rate of Solid Propellants Under Acceleration written by G. Burton Northam and published by . This book was released on 1969 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Effects of Normal Acceleration on Transient Burning-rate Augmentation of an Aluminized Solid Propellant by : G. Burton Northam
Download or read book Effects of Normal Acceleration on Transient Burning-rate Augmentation of an Aluminized Solid Propellant written by G. Burton Northam and published by . This book was released on 1972 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instantaneous burning rate data for a polybutadiene acrylic acid propellant, containing 16 weight percent aluminum, were calculated from the pressure histories of a test motor with 96.77 sq cm of burning area and a 5.08-cm-thick propellant web. Additional acceleration tests were conducted with reduced propellant web thicknesses of 3.81, 2.54, and 1.27 cm. The metallic residue collected from the various web thickness tests was characterized by weight and shape and correlated with the instantaneous burning rate measurements. Rapid depressurization extinction tests were conducted in order that surface pitting characteristics due to localized increased burning rate could be correlated with the residue analysis and the instantaneous burning rate data. The acceleration-induced burning rate augmentation was strongly dependent on propellant distance burned, or burning time, and thus was transient in nature. The results from the extinction tests and the residue analyses indicate that the transient rate augmentation was highly dependent on local enhancement of the combustion zone heat feedback to the surface by the growth of molten residue particles on or just above the burning surface. The size, shape, and number density of molten residue particles, rather than the total residue weight, determined the acceleration-induced burning rate augmentation.
Book Synopsis An Experimental Investigation of the Effects of Acceleration on the Combustion Characteristics of an Aluminized Composite Solid Propellant by : George Burton Northam
Download or read book An Experimental Investigation of the Effects of Acceleration on the Combustion Characteristics of an Aluminized Composite Solid Propellant written by George Burton Northam and published by . This book was released on 1965 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Effects of Orientation of the Acceleration Vector on Burning-rate Augmentation by : G. Burton Northam
Download or read book Effects of Orientation of the Acceleration Vector on Burning-rate Augmentation written by G. Burton Northam and published by . This book was released on 1972 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The functional dependence of acceleration-induced burning-rate augmentation on the magnitude and orientation of the acceleration vector was determined for an aluminized composite propellant by using a slab motor mounted at various angles on a centrifuge. The rate augmentation was strongly dependent on the orientation of the acceleration vector with respect to the burning propellant surface.
Book Synopsis An Investigation of the Effects of Acceleration and Strand Length on Post-Fire Residue of Aluminized Propellants by : David Eugene Cowles
Download or read book An Investigation of the Effects of Acceleration and Strand Length on Post-Fire Residue of Aluminized Propellants written by David Eugene Cowles and published by . This book was released on 1970 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminized propellant strand lengths from one-quarter to two inches were burned at accelerations from zero to 1000g at a mean combustion pressure of 500 psia to study the effect of acceleration and strand length on burning rate augmentation. Propellant ammonium perchlorate oxidizer size and base burning rate were varied to investigate their effects. Each post-fire residue was photographically recorded and chemical analysis was performed by X-Ray powder diffraction. Burning rate augmentation decreased and residue weight increased when the strand length was increased. Aluminum and aluminum oxide were identified at low accelerations independent of strand length; aluminum oxide was not detectable at high accelerations. Ammonium perchlorate size and base burning rate had little effect on the functional dependence of residue weight on burn time. The Crowe, et al., model was found to indicate the correct augmentation trend as a function of burn time if the time-history of the metallic agglomerates is known. (Author).
Book Synopsis An Investigation of Solid Propellant Combustion in Standard and High Acceleration Environments by : Michael Abraham
Download or read book An Investigation of Solid Propellant Combustion in Standard and High Acceleration Environments written by Michael Abraham and published by . This book was released on 1974 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonmetallized double-base and composite propellant, metallized composite propellant, and ammonium perchlorate (AP)/binder sandwich combustion were studied in standard and high acceleration environments. Experimental techniques used were high speed motion pictures, tow-color schlieren, laser schlieren, and centrifuge mounted combustion bombs. It was found for double-base propellant that the temperature increased continuously from the surface into the visible flame. Acceleration induced burning rate augmentation occurred and resulted in elimination of the visible flame. Acceleration apparently modified the surface or subsurface zones. AP/binder sandwich combustion was also found to be acceleration sensitive with binder flow-AP interactions proposed as the mechanism. Composite propellants burned with local diffusion flames to pressures as slow as 100 psi. A comparison is made between AP/binder sandwich combustion and propellant combustion. (Author).
Download or read book NASA Technical Note written by and published by . This book was released on 1972 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Nonmetallized Composite Propellant Combustion by : David Willis Netzer
Download or read book Nonmetallized Composite Propellant Combustion written by David Willis Netzer and published by . This book was released on 1972 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: An experimental investigation of nonmetallized composite propellant combustion in standard and high acceleration environments was made. Pressed ammonium perchlorate (AP) pellets of varying purity, AP/binder sandwich burners, and propellant strands were employed. AP/binder sandwich burners where studied in an optically equipped centrifuge and color schlieren were taken in a conventional combustion bomb. Ascast and dewetted propellants were used to study the effect of preferential interfacial reactions on burning rate acceleration sensitivity. Results are discussed for the effects of acceleration, pressure, AP purity, and propellant composition on the burning rate. (Author).
Book Synopsis The Effects of Acceleration on Burning Rates of Nonmetallized Composite Propellants by : Robert Carroll Bates
Download or read book The Effects of Acceleration on Burning Rates of Nonmetallized Composite Propellants written by Robert Carroll Bates and published by . This book was released on 1969 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: The burning rates of five nonmetallized composite propellants were measured in acceleration fields up to 1000g using a combustion bomb mounted on a centrifuge. Two propellants were burned at 1000 psia and all five were burned at 500 psia. The experimental results were examined to separate the effects of pressure, base burning rate and AP crystal size on burning rate augmentation. Increasing pressure was found to increase the augmentation except at low acceleration levels. The augmentation was found to be a strong function of base burning rate and a weak function of AP crystal size. The results were compared with Sturm's model for augmentation of nonmetallized composite propellants and found to compare favorably. A new expression for d-critical was proposed which better correlates experimental data. (Author).
Book Synopsis Effects of Acceleration and Velocity Fields on the Burning Rates of Composite Solid Propellants by : Kuriakose Vargheese
Download or read book Effects of Acceleration and Velocity Fields on the Burning Rates of Composite Solid Propellants written by Kuriakose Vargheese and published by . This book was released on 1971 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Abstracts of Dissertations, Theses and Research Papers Submitted by Candidates for Degrees by : Naval Postgraduate School (U.S.)
Download or read book Abstracts of Dissertations, Theses and Research Papers Submitted by Candidates for Degrees written by Naval Postgraduate School (U.S.) and published by . This book was released on 1966 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
