Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
A Study On 3d Printing And Its Effects On The Future Of Transportation
Download A Study On 3d Printing And Its Effects On The Future Of Transportation full books in PDF, epub, and Kindle. Read online A Study On 3d Printing And Its Effects On The Future Of Transportation ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis 3D Printing for Development in the Global South by : T. Birtchnell
Download or read book 3D Printing for Development in the Global South written by T. Birtchnell and published by Springer. This book was released on 2014-10-14 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Birtchnell and Hoyle explore how printers, designs, materials and infrastructures all need to be 'just right' in order for meaningful social change to happen with appropriate scale. The 3D4D Challenge suggests 3D printing could reach scale in the Global South, even perhaps having the same impact as the mobile phone or microfinance in development.
Book Synopsis Additive Manufacturing Technologies by : Ian Gibson
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Book Synopsis 3D Printing with Biomaterials by : A.J.M. van Wijk
Download or read book 3D Printing with Biomaterials written by A.J.M. van Wijk and published by IOS Press. This book was released on 2015-01-15 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing or 3D printing, manufacturing a product layer by layer, offers large design freedom and faster product development cycles, as well as low startup cost of production, on-demand production and local production. In principle, any product could be made by additive manufacturing. Even food and living organic cells can be printed. We can create, design and manufacture what we want at the location we want. 3D printing will create a revolution in manufacturing, a real paradigm change. 3D printing holds the promise to manufacture with less waste and energy. We can print metals, ceramics, sand, synthetic materials such as plastics, food or living cells. However, the production of plastics is nowadays based on fossil fuels. And that’s where we witness a paradigm change too. The production of these synthetic materials can be based also on biomaterials with biomass as feedstock. A wealth of new and innovative products are emerging when we combine these two paradigm changes: 3D printing and biomaterials. Moreover, the combination of 3D printing with biomaterials holds the promise to realize a truly sustainable and circular economy.
Book Synopsis Integrating 3D Printing into Teaching and Learning by :
Download or read book Integrating 3D Printing into Teaching and Learning written by and published by BRILL. This book was released on 2020-01-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent attempts to integrate 3D printing into the curriculum in schools and universities and research on its efficacies and usefulness from the practitioners' perspectives. The book unveils the exemplary works by educators and researchers in the field highlighting the current trends, theoretical and practical aspects of 3D printing in teaching and learning.
Book Synopsis Paths of Innovation by : David C. Mowery
Download or read book Paths of Innovation written by David C. Mowery and published by Cambridge University Press. This book was released on 1999-10-28 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1903 the Wright brothers' airplane travelled a couple of hundred yards. Today fleets of streamlined jets transport millions of people each day to cities worldwide. Between discovery and application, between invention and widespread use, there is a world of innovation, of tinkering, improvement and adaptation. This is the world David Mowery and Nathan Rosenberg map out in Paths of Innovation, a tour of the intersecting routes of technological change. Throughout their book, Mowery and Rosenberg demonstrate that the simultaneous emergence of new engineering and applied science disciplines in the universities, in tandem with growth in the Research and Development industry and scientific research, has been a primary factor in the rapid rate of technological change. Innovation and incentives to develop new, viable processes have led to the creation of new economic resources - which will determine the future of technological innovation and economic growth.
Book Synopsis Rapid Manufacturing by : Neil Hopkinson
Download or read book Rapid Manufacturing written by Neil Hopkinson and published by John Wiley & Sons. This book was released on 2006-02-22 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Manufacturing is a new area of manufacturing developed from a family of technologies known as Rapid Prototyping. These processes have already had the effect of both improving products and reducing their development time; this in turn resulted in the development of the technology of Rapid Tooling, which implemented Rapid Prototyping techniques to improve its own processes. Rapid Manufacturing has developed as the next stage, in which the need for tooling is eliminated. It has been shown that it is economically feasible to use existing commercial Rapid Prototyping systems to manufacture series parts in quantities of up to 20,000 and customised parts in quantities of hundreds of thousands. This form of manufacturing can be incredibly cost-effective and the process is far more flexible than conventional manufacturing. Rapid Manufacturing: An Industrial Revolution for the Digital Age addresses the academic fundamentals of Rapid Manufacturing as well as focussing on case studies and applications across a wide range of industry sectors. As a technology that allows manufacturers to create products without tools, it enables previously impossible geometries to be made. This book is abundant with images depicting the fantastic array of products that are now being commercially manufactured using these technologies. Includes contributions from leading researchers working at the forefront of industry. Features detailed illustrations throughout. Rapid Manufacturing: An Industrial Revolution for the Digital Age is a groundbreaking text that provides excellent coverage of this fast emerging industry. It will interest manufacturing industry practitioners in research and development, product design and materials science, as well as having a theoretical appeal to researchers and post-graduate students in manufacturing engineering, product design, CAD/CAM and CIFM.
Book Synopsis Tribology of Polymer and Polymer Composites for Industry 4.0 by : Hemalata Jena
Download or read book Tribology of Polymer and Polymer Composites for Industry 4.0 written by Hemalata Jena and published by Springer Nature. This book was released on 2021-08-23 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book first introduces polymers and polymer composites which are widely used in different industrial and engineering applications where the proper selection of fiber, filler, and polymer can be tailored for particular application. The primary objective of this book is to broaden the knowledge of tribology of polymer composites in a new dimension for Industry 4.0. For instance, the book covers polymer composites used as self-lubricating material used in the automotive industry and other manufacturing equipment to reduce the effect of energy loss due to friction and wear. This book is of interest to researchers and industrial practitioners who work in the field of tribology of polymer composites, manufacturing equipment and production engineering.
Book Synopsis 3D Printing of Pharmaceuticals by : Abdul W. Basit
Download or read book 3D Printing of Pharmaceuticals written by Abdul W. Basit and published by Springer. This book was released on 2018-08-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing is forecast to revolutionise the pharmaceutical sector, changing the face of medicine development, manufacture and use. Potential applications range from pre-clinical drug development and dosage form design through to the fabrication of functionalised implants and regenerative medicine. Within clinical pharmacy practice, printing technologies may finally lead to the concept of personalised medicines becoming a reality. This volume aims to be the definitive resource for anyone thinking of developing or using 3D printing technologies in the pharmaceutical sector, with a strong focus on the translation of printing technologies to a clinical setting. This text brings together leading experts to provide extensive information on an array of 3D printing techniques, reviewing the current printing technologies in the pharmaceutical manufacturing supply chain, in particular, highlighting the state-of-the-art applications in medicine and discussing modern drug product manufacture from a regulatory perspective. This book is a highly valuable resource for a range of demographics, including academic researchers and the pharmaceutical industry, providing a comprehensive inventory detailing the current and future applications of 3D printing in pharmaceuticals. Abdul W. Basit is Professor of Pharmaceutics at the UCL School of Pharmacy, University College London. Abdul’s research sits at the interface between pharmaceutical science and gastroenterology, forging links between basic science and clinical outcomes. He leads a large and multidisciplinary research group, and the goal of his work is to further the understanding of gastrointestinal physiology by fundamental research. So far, this knowledge has been translated into the design of new technologies and improved disease treatments, many of which are currently in late-stage clinical trials. He has published over 350 papers, book chapters and abstracts and delivered more than 250 invited research presentations. Abdul is also a serial entrepreneur and has filed 25 patents and founded 3 pharmaceutical companies (Kuecept, Intract Pharma, FabRx). Abdul is a frequent speaker at international conferences, serves as a consultant to many pharmaceutical companies and is on the advisory boards of scientific journals, healthcare organisations and charitable bodies. He is the European Editor of the International Journal of Pharmaceutics. Abdul was the recipient of the Young Investigator Award in Pharmaceutics and Pharmaceutical Technology from the American Association of Pharmaceutical Scientists (AAPS) and is the only non-North American scientist to receive this award. He was also the recipient of the Academy of Pharmaceutical Sciences (APS) award. Simon Gaisford holds a Chair in Pharmaceutics and is Head of the Department of Pharmaceutics at the UCL School of Pharmacy, University College London. He has published 110 papers, 8 book chapters and 4 authored books. His research is focused on novel technologies for manufacturing medicines, particularly using ink-jet printing and 3D printing, and he is an expert in the physico-chemical characterisation of compounds and formulations with thermal methods and calorimetry.
Book Synopsis Modelling Freight Transport by : Lorant Tavasszy
Download or read book Modelling Freight Transport written by Lorant Tavasszy and published by Elsevier. This book was released on 2013-10-11 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Freight Transport Modelling is a unique new reference book that provides insight into the state-of-the-art of freight modelling. Focusing on models used to support public transport policy analysis, Freight Transport Modelling systematically introduces the latest freight transport modelling approaches and describes the main methods and techniques used to arrive at operational models. As freight transport has grown exponentially in recent decades, policymakers now need to include freight flows in quantitative evaluations of transport systems. Whereas early freight modelling practice was inspired by passenger transport models, by now it has developed its separate stream of methods and techniques inspired by disciplines such as economic geography and supply chain management. Besides summarizing the latest achievements in fundamental research, this book describes the state of practice and advises practitioners on how to cope with typical challenges such as limitations in data availability. - Uniquely focused book exploring the key issues and logistics of freight transport modelling - Highlights the latest approaches and describes the main methods and techniques used to arrive at operational models - Summarizes fundamental research into freight transport modeling, as well as current practices and advice for practitioners facing day-to-day challenges
Book Synopsis Biosynthetic Polymers for Medical Applications by : Laura Poole-Warren
Download or read book Biosynthetic Polymers for Medical Applications written by Laura Poole-Warren and published by Elsevier. This book was released on 2015-11-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosynthetic Polymers for Medical Applications provides the latest information on biopolymers, the polymers that have been produced from living organisms and are biodegradable in nature. These advanced materials are becoming increasingly important for medical applications due to their favorable properties, such as degradability and biocompatibility. This important book provides readers with a thorough review of the fundamentals of biosynthetic polymers and their applications. Part One covers the fundamentals of biosynthetic polymers for medical applications, while Part Two explores biosynthetic polymer coatings and surface modification. Subsequent sections discuss biosynthetic polymers for tissue engineering applications and how to conduct polymers for medical applications. - Comprehensively covers all major medical applications of biosynthetic polymers - Provides an overview of non-degradable and biodegradable biosynthetic polymers and their medical uses - Presents a specific focus on coatings and surface modifications, biosynthetic hydrogels, particulate systems for gene and drug delivery, and conjugated conducting polymers
Book Synopsis Wohlers Report 2017 by : Wohlers Associates, Inc
Download or read book Wohlers Report 2017 written by Wohlers Associates, Inc and published by . This book was released on 2017 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :National Research Council (U.S.). Committee on Space-Based Additive Manufacturing Publisher : ISBN 13 :9780309310086 Total Pages :0 pages Book Rating :4.3/5 (1 download)
Book Synopsis 3D Printing in Space by : National Research Council (U.S.). Committee on Space-Based Additive Manufacturing
Download or read book 3D Printing in Space written by National Research Council (U.S.). Committee on Space-Based Additive Manufacturing and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing has the potential to positively affect human spaceflight operations by enabling the in-orbit manufacture of replacement parts and tools, which could reduce existing logistics requirements for the International Space Station and future long-duration human space missions. The benefits of in-space additive manufacturing for robotic spacecraft are far less clear, although this rapidly advancing technology can also potentially enable space-based construction of large structures and, perhaps someday, substantially in the future, entire spacecraft. Additive manufacturing can also help to reimagine a new space architecture that is not constrained by the design and manufacturing confines of gravity, current manufacturing processes, and launch-related structural stresses. The specific benefits and potential scope of additive manufacturing remain undetermined. The realities of what can be accomplished today, using this technology on the ground, demonstrate the substantial gaps between the vision for additive manufacturing in space and the limitations of the technology and the progress that has to be made to develop it for space use. 3D Printing in Space evaluates the prospects of in-space additive manufacturing. This report examines the various technologies available and currently in development, and considers the possible impacts for crewed space operations and robotic spacecraft operations. Ground-based additive manufacturing is being rapidly developed by industry, and 3D Printing in Space discusses government-industry investments in technology development. According to this report, the International Space Station provides an excellent opportunity for both civilian and military research on additive manufacturing technology. Additive manufacturing presents potential opportunities, both as a tool in a broad toolkit of options for space-based activities and as a potential paradigm-changing approach to designing hardware for in-space activities. This report makes recommendations for future research, suggests objectives for an additive manufacturing roadmap, and envisions opportunities for cooperation and joint development.
Book Synopsis A Fire Upon The Deep by : Vernor Vinge
Download or read book A Fire Upon The Deep written by Vernor Vinge and published by Tor Science Fiction. This book was released on 2010-04-01 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now with a new introduction for the Tor Essentials line, A Fire Upon the Deep is sure to bring a new generation of SF fans to Vinge's award-winning works. A Hugo Award-winning Novel! “Vinge is one of the best visionary writers of SF today.”-David Brin Thousands of years in the future, humanity is no longer alone in a universe where a mind's potential is determined by its location in space, from superintelligent entities in the Transcend, to the limited minds of the Unthinking Depths, where only simple creatures, and technology, can function. Nobody knows what strange force partitioned space into these "regions of thought," but when the warring Straumli realm use an ancient Transcendent artifact as a weapon, they unwittingly unleash an awesome power that destroys thousands of worlds and enslaves all natural and artificial intelligence. Fleeing this galactic threat, Ravna crash lands on a strange world with a ship-hold full of cryogenically frozen children, the only survivors from a destroyed space-lab. They are taken captive by the Tines, an alien race with a harsh medieval culture, and used as pawns in a ruthless power struggle. Tor books by Vernor Vinge Zones of Thought Series A Fire Upon The Deep A Deepness In The Sky The Children of The Sky Realtime/Bobble Series The Peace War Marooned in Realtime Other Novels The Witling Tatja Grimm's World Rainbows End Collections Collected Stories of Vernor Vinge True Names At the Publisher's request, this title is being sold without Digital Rights Management Software (DRM) applied.
Book Synopsis The Next Production Revolution by : Collectif
Download or read book The Next Production Revolution written by Collectif and published by OECD. This book was released on 2017-05-10 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication examines the opportunities and challenges, for business and government, associated with technologies bringing about the “next production revolution”. These include a variety of digital technologies (e.g. the Internet of Things and advanced robotics), industrial biotechnology, 3D printing, new materials and nanotechnology. Some of these technologies are already used in production, while others will be available in the near future. All are developing rapidly. As these technologies transform the production and the distribution of goods and services, they will have far-reaching consequences for productivity, skills, income distribution, well-being and the environment. The more that governments and firms understand how production could develop in the near future, the better placed they will be to address the risks and reap the benefits.
Book Synopsis 3D Printing in Biomedical Engineering by : Sunpreet Singh
Download or read book 3D Printing in Biomedical Engineering written by Sunpreet Singh and published by Springer Nature. This book was released on 2020-07-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of the rapidly evolving field of three-dimensional (3D) printing, and its increasing applications in the biomedical domain. 3D printing has distinct advantages like improved quality, cost-effectiveness, and higher efficiency compared to traditional manufacturing processes. Besides these advantages, current challenges and opportunities regarding choice of material, design, and efficiency are addressed in the book. Individual chapters also focus on select areas of applications such as surgical guides, tissue regeneration, artificial scaffolds and implants, and drug delivery and release. This book will be a valuable source of information for researchers and professionals interested in the expanding biomedical applications of 3D printing.
Book Synopsis The Digital Transformation of Logistics by : Mac Sullivan
Download or read book The Digital Transformation of Logistics written by Mac Sullivan and published by John Wiley & Sons. This book was released on 2021-03-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The digital transformation is in full swing and fundamentally changes how we live, work, and communicate with each other. From retail to finance, many industries see an inflow of new technologies, disruption through innovative platform business models, and employees struggling to cope with the significant shifts occurring. This Fourth Industrial Revolution is predicted to also transform Logistics and Supply Chain Management, with delivery systems becoming automated, smart networks created everywhere, and data being collected and analyzed universally. The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution provides a holistic overview of this vital subject clouded by buzz, hype, and misinformation. The book is divided into three themed-sections: Technologies such as self-driving cars or virtual reality are not only electrifying science fiction lovers anymore, but are also increasingly presented as cure-all remedies to supply chain challenges. In The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution, the authors peel back the layers of excitement that have grown around new technologies such as the Internet of Things (IoT), 3D printing, Robotic Process Automation (RPA), Blockchain or Cloud computing, and show use cases that give a glimpse about the fascinating future we can expect. Platforms that allow businesses to centrally acquire and manage their logistics services disrupt an industry that has been relationship-based for centuries. The authors discuss smart contracts, which are one of the most exciting applications of Blockchain, Software as a Service (SaaS) offerings for freight procurement, where numerous data sources can be integrated and decision-making processes automated, and marine terminal operating systems as an integral node for shipments. In The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution, insights are shared into the cold chain industry where companies respond to increasing quality demands, and how European governments are innovatively responding to challenges of cross-border eCommerce. People are a vital element of the digital transformation and must be on board to drive change. The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution explains how executives can create sustainable impact and how competencies can be managed in the digital age - especially for sales executives who require urgent upskilling to remain relevant. Best practices are shared for organizational culture change, drawing on studies among senior leaders from the US, Singapore, Thailand, and Australia, and for managing strategic alliances with logistics service providers to offset risks and create cross-functional, cross-company transparency. The Digital Transformation of Logistics: Demystifying Impacts of the Fourth Industrial Revolution provides realistic insights, a ready-to-use knowledge base, and a working vocabulary about current activities and emerging trends of the Logistics industry. Intended readers are supply chain professionals working for manufacturing, trading, and freight forwarding companies as well as students and all interested parties.
Book Synopsis 3D Printing by : Christopher Barnatt
Download or read book 3D Printing written by Christopher Barnatt and published by Createspace Independent Publishing Platform. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "'3D Printing: The Next Industrial Revolution' explores the practicalities and potential of 3D printing today, as well as trying to realistically foresee the impact of 3D printing on the world of tomorrow. The book is written for a wide audience, including 3D printing enthusiasts, entrepreneurs, designers, investors, students, and indeed anybody who wants to be more informed about the next round of radical technological change. Particular features of the book include an extensive chapter that details every current 3D printing technology, as well as an industry overview covering 3D printer manufacturers, software providers, and bureau services. These chapters are then supported by an extensive 3D printing glossary (of over 100 terms) and a 3D printing directory." --Amazon.com.
