Author : Sang Soo Kim
Publisher :
ISBN 13 :
Total Pages : 108 pages
Book Rating : 4.:/5 (489 download)
Book Synopsis A Simple Test Procedure for Evaluating Low Temperature Crack Resistance of Asphalt Concrete by : Sang Soo Kim
Download or read book A Simple Test Procedure for Evaluating Low Temperature Crack Resistance of Asphalt Concrete written by Sang Soo Kim and published by . This book was released on 2009 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current means of evaluating the low temperature cracking resistance of HMA relies on extensive test methods that require assumptions about material behaviors and the use of complicated loading equipment. The purpose of this study was to develop and validate a simple test method to directly measure the cracking resistance of hot mix asphalt under field-like conditions. A ring shape asphalt concrete cracking device (ACCD) was developed. ACCD utilizes the low thermal expansion coefficient of Invar steel to induce tensile stresses in a HMA sample as temperature is lowered. The results of the tests of the notched ring shaped specimens compacted around an ACCD Invar ring showed good repeatability with less than 1.0°C (1.8°F) standard deviation in cracking temperature. A laboratory validation indicated that ACCD results of five mixes correlate well with thermal stress restrained specimen test (TSRST) results with the coefficient of determination , r2 = 0.86. To prepare a sample and complete TSRST measurement, it takes minimum 2-3 days. For ACCD, two samples can be easily prepared and tested in a single day with a small test set-up. The capacity of ACCD can be increased easily with minimal cost to accommodate a larger number of samples. Among factors affecting the low temperature performance of HMA, the coefficient of thermal expansion (CTE) of aggregate has been overlooked for years. A composite model of HMA is proposed to describe the low temperature cracking phenomenon. Due to the orthotropic and composite nature of asphalt pavement contraction during cooling, the effects of aggregate CTE is amplified up to 18 times for a typical HMA. Of 14 Ohio aggregates studied, the maximum and the minimum CTEs are 11.4 and 4.0 x 10-6/°C, respectively. During cooling, the contraction of Ohio aggregate with high CTE can double the thermal strain of asphalt binders in the asphalt mix and may cause asphalt pavement thermal cracking at warmer temperature.