Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Triple Ion Beam Studies Of Radiation Damage In 9cr2wvta Ferritic
Download Triple Ion Beam Studies Of Radiation Damage In 9cr2wvta Ferritic full books in PDF, epub, and Kindle. Read online Triple Ion Beam Studies Of Radiation Damage In 9cr2wvta Ferritic ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Triple Ion-Beam Studies of Radiation Damage in 9Cr2WVTa Ferritic by :
Download or read book Triple Ion-Beam Studies of Radiation Damage in 9Cr2WVTa Ferritic written by and published by . This book was released on 2001 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: To simulate radiation damage under a future Spallation Neutron Source (SNS) environment, irradiation experiments were conducted on a candidate 9Cr-2WVTa ferritic/martensitic steel using the Triple Ion Facility (TIF) at ORNL. Irradiation was conducted in single, dual, and triple ion beam modes using 3.5 MeV Fe2, 360 keV He, and 180 keV H at 80, 200, and 350 C. These irradiations produced various defects comprising black dots, dislocation loops, line dislocations, and gas bubbles, which led to hardening. The largest increase in hardness, over 63%, was observed after 50 dpa for triple beam irradiation conditions, revealing that both He and H are augmenting the hardening. Hardness increased less than 30% after 30 dpa at 200 C by triple beams, compatible with neutron irradiation data from previous work which showed about a 30% increase in yield strength after 27.2 dpa at 365 C. However, the very large concentrations of gas bubbles in the matrix and on lath and grain boundaries after these simulated SNS irradiations make predictions of fracture behavior from fission reactor irradiations to spallation target conditions inadvisable.
Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 1156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :International Atomic Energy Agency Publisher :International Atomic Energy Agency ISBN 13 :9789201450104 Total Pages :108 pages Book Rating :4.4/5 (51 download)
Book Synopsis Applications of Research Reactors by : International Atomic Energy Agency
Download or read book Applications of Research Reactors written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2014 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a comprehensive study that reviews the current situation in a great number of applications of research reactors. It revises the contents of IAEA TECDOC-1234, The Applications of Research Reactors, giving detailed updates on each field of research reactor uses worldwide. Reactors of all sizes and capabilities can benefit from the sharing of current practices and research enabled via this updated version, which describes the requirements for practicing methods as diverse as neutron activation analysis, education and training, neutron scattering and neutron imaging, silicon doping and radioisotope production, material/fuel irradiation and testing, and some others. Many underutilised research reactors can learn how to diversify their technical capabilities, staff and potential commercial partners and users seeking research reactor services and products. The content of the publication has also been strengthened in terms of current issues facing the vast majority of research reactors by including sections describing user and customer relations as well as strategic planning considerations.
Book Synopsis Status of Accelerator Driven Systems Research and Technology Development by : International Atomic Energy Agency
Download or read book Status of Accelerator Driven Systems Research and Technology Development written by International Atomic Energy Agency and published by IAEA Tecdoc. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges for nuclear energy is how to properly manage the highly radioactive waste generated during irradiation in nuclear reactors. Accelerator Driven Systems (ADSs) may offer new prospects and advantages for the transmutation of such high level nuclear waste. ADS or accelerator driven transmutation of waste (ATW) consists of a high power proton accelerator, a heavy metal spallation target that produces neutrons when bombarded by the high power beam, and a sub-critical core that is neutronically coupled to the spallation target. This publication provides a comprehensive state of the art of the ADS technology by representing the different ADS concepts proposed worldwide in the last 15 years, as well as the related R&D activities and demonstration initiatives carried out at national international level.
Book Synopsis Bainite in Steels by : H.K.D.H. Bhadeshia
Download or read book Bainite in Steels written by H.K.D.H. Bhadeshia and published by CRC Press. This book was released on 2019-04-15 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third edition of the book, much expanded to include and incorporate important developments in the subject over the last fifteen years. The book represents a comprehensive treatise on all aspects of the bainite transformation, from the choreography of atoms during the phase change to length scales that are typical of engineering applications. The alloy design that emerges from this explains the role of solute additions, and the pernicious effects of impurities such as hydrogen. The picture presented is self-consistent and therefore is able to guide the reader on the exploitation of theory to the design of some of the most exciting steels, including the world’s first bulk nanostructured metal.
Book Synopsis Handbook of Self Assembled Semiconductor Nanostructures for Novel Devices in Photonics and Electronics by : Mohamed Henini
Download or read book Handbook of Self Assembled Semiconductor Nanostructures for Novel Devices in Photonics and Electronics written by Mohamed Henini and published by Elsevier Science. This book was released on 2008 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1969, Leo Esaki (1973 Nobel Laureate) and Ray Tsu from IBM, USA, proposed research on “man-made crystals” using a semiconductor superlattice (a semiconductor structure comprising several alternating ultra-thin layers of semiconductor materials with different properties). This invention was perhaps the first proposal to advocate the engineering of a new semiconductor material, and triggered a wide spectrum of experimental and theoretical investigations. However, the study of what are now called low dimensional structures (LDS) began in the late 1970's when sufficiently thin epitaxial layers were first produced following developments in the technology of epitaxial growth of semiconductors, mainly pioneered in industrial laboratories for device purposes. The LDS are materials structures whose dimensions are comparable with inter-atomic distances in solids (i.e. nanometre, nm). Their electronic properties are significantly different from the same material in bulk form. These properties are changed by quantum effects. At the inception of their investigation it was already clear that such structures were of great scientific interest and excitement and their novel properties caused by quantum effects offered potential for application in new devices. Moreover these complex LDS offer device engineers new design opportunities for tailor-made new generation electronic devices. The LDS could be considered as a new branch of condensed matter physics because of the large variety of possible structures and the changes in the physical processes. One of the promising fabrication methods to produce and study structures with a dimension less than two such as quantum wires and quantum dots, in order to realise novel devices that make use of low-dimensional confinement effects, is self-organisation. Self-assembled nanostructured materials offer a number of advantages over conventional material technologies in a wide-range of sectors. Clearly, future research work on self-assembled nanostructures will connect diverse areas of material science, physics, chemistry, electronics and optoelectronics. Key Features: - Contributors are world leaders in the field - Brings together all the factors which are essential in self-organisation of quantum nanostructures - Reviews the current status of research and development in self-organised nanostructured materials - Provides a ready source of information on a wide range of topics - Useful to any scientist who is involved in nanotechnology - Excellent starting point for workers entering the field - Serves as an excellent reference manual
Book Synopsis Applications of Research Reactors Towards Research on Materials for Nuclear Fusion Technology by : International Atomic Energy Agency
Download or read book Applications of Research Reactors Towards Research on Materials for Nuclear Fusion Technology written by International Atomic Energy Agency and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the role of research reactors in fusion research from fundamental studies to collaborative efforts by fission and fusion communities. Focusing on materials science and engineering, within the larger scheme of fusion energy development, the publication then proceeds through the stages of testing and qualification.
Book Synopsis Fundamentals of Radiation Materials Science by : GARY S. WAS
Download or read book Fundamentals of Radiation Materials Science written by GARY S. WAS and published by Springer. This book was released on 2016-07-08 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised second edition of this established text offers readers a significantly expanded introduction to the effects of radiation on metals and alloys. It describes the various processes that occur when energetic particles strike a solid, inducing changes to the physical and mechanical properties of the material. Specifically it covers particle interaction with the metals and alloys used in nuclear reactor cores and hence subject to intense radiation fields. It describes the basics of particle-atom interaction for a range of particle types, the amount and spatial extent of the resulting radiation damage, the physical effects of irradiation and the changes in mechanical behavior of irradiated metals and alloys. Updated throughout, some major enhancements for the new edition include improved treatment of low- and intermediate-energy elastic collisions and stopping power, expanded sections on molecular dynamics and kinetic Monte Carlo methodologies describing collision cascade evolution, new treatment of the multi-frequency model of diffusion, numerous examples of RIS in austenitic and ferritic-martensitic alloys, expanded treatment of in-cascade defect clustering, cluster evolution, and cluster mobility, new discussion of void behavior near grain boundaries, a new section on ion beam assisted deposition, and reorganization of hardening, creep and fracture of irradiated materials (Chaps 12-14) to provide a smoother and more integrated transition between the topics. The book also contains two new chapters. Chapter 15 focuses on the fundamentals of corrosion and stress corrosion cracking, covering forms of corrosion, corrosion thermodynamics, corrosion kinetics, polarization theory, passivity, crevice corrosion, and stress corrosion cracking. Chapter 16 extends this treatment and considers the effects of irradiation on corrosion and environmentally assisted corrosion, including the effects of irradiation on water chemistry and the mechanisms of irradiation-induced stress corrosion cracking. The book maintains the previous style, concepts are developed systematically and quantitatively, supported by worked examples, references for further reading and end-of-chapter problem sets. Aimed primarily at students of materials sciences and nuclear engineering, the book will also provide a valuable resource for academic and industrial research professionals. Reviews of the first edition: "...nomenclature, problems and separate bibliography at the end of each chapter allow to the reader to reach a straightforward understanding of the subject, part by part. ... this book is very pleasant to read, well documented and can be seen as a very good introduction to the effects of irradiation on matter, or as a good references compilation for experimented readers." - Pauly Nicolas, Physicalia Magazine, Vol. 30 (1), 2008 “The text provides enough fundamental material to explain the science and theory behind radiation effects in solids, but is also written at a high enough level to be useful for professional scientists. Its organization suits a graduate level materials or nuclear science course... the text was written by a noted expert and active researcher in the field of radiation effects in metals, the selection and organization of the material is excellent... may well become a necessary reference for graduate students and researchers in radiation materials science.” - L.M. Dougherty, 07/11/2008, JOM, the Member Journal of The Minerals, Metals and Materials Society.
Book Synopsis Quantum Dot Devices by : Zhiming M. Wang
Download or read book Quantum Dot Devices written by Zhiming M. Wang and published by Springer Science & Business Media. This book was released on 2012-05-24 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum dots as nanomaterials have been extensively investigated in the past several decades from growth to characterization to applications. As the basis of future developments in the field, this book collects a series of state-of-the-art chapters on the current status of quantum dot devices and how these devices take advantage of quantum features. Written by 56 leading experts from 14 countries, the chapters cover numerous quantum dot applications, including lasers, LEDs, detectors, amplifiers, switches, transistors, and solar cells. Quantum Dot Devices is appropriate for researchers of all levels of experience with an interest in epitaxial and/or colloidal quantum dots. It provides the beginner with the necessary overview of this exciting field and those more experienced with a comprehensive reference source.
Download or read book New Nuclear Data written by and published by . This book was released on 1957 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Structural Materials for Generation IV Nuclear Reactors by : Pascal Yvon
Download or read book Structural Materials for Generation IV Nuclear Reactors written by Pascal Yvon and published by Woodhead Publishing. This book was released on 2016-08-27 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates Written by an expert in that particular area
Book Synopsis Nuclear Corrosion Science and Engineering by : Damien Feron
Download or read book Nuclear Corrosion Science and Engineering written by Damien Feron and published by Elsevier. This book was released on 2012-02-21 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion of nuclear materials, i.e. the interaction between these materials and their environments, is a major issue for plant safety as well as for operation and economic competitiveness. Understanding these corrosion mechanisms, the systems and materials they affect, and the methods to accurately measure their incidence is of critical importance to the nuclear industry. Combining assessment techniques and analytical models into this understanding allows operators to predict the service life of corrosion-affected nuclear plant materials, and to apply the most appropriate maintenance and mitigation options to ensure safe long term operation. This book critically reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities. Initial sections introduce the complex field of nuclear corrosion science, with detailed chapters on the different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them. This is complemented by reviews of monitoring and control methodologies, as well as modelling and lifetime prediction approaches. Given that corrosion is an applied science, the final sections review corrosion issues across the range of current and next-generation nuclear reactors, and across such nuclear applications as fuel reprocessing facilities, radioactive waste storage and geological disposal systems. With its distinguished editor and international team of expert contributors, Nuclear corrosion science and engineering is an invaluable reference for nuclear metallurgists, materials scientists and engineers, as well as nuclear facility operators, regulators and consultants, and researchers and academics in this field. Comprehensively reviews the fundamental corrosion mechanisms that affect nuclear power plants and facilities Chapters assess different types of both aqueous and non aqueous corrosion mechanisms and the nuclear materials susceptible to attack from them Considers monitoring and control methodologies, as well as modelling and lifetime prediction approaches
Book Synopsis High-chromium Ferritic and Martensitic Steels for Nuclear Applications by : R. L. Klueh
Download or read book High-chromium Ferritic and Martensitic Steels for Nuclear Applications written by R. L. Klueh and published by ASTM International. This book was released on 2001-01-01 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph reviews the development of high-chromium ferritic/martensitic steels for exposure to the high-energy neutron environment of a fission or fusion reactor, and considers their potential use as a component material. The basic properties of the steels under non-nuclear conditions are provi
Book Synopsis Fundamental Aspects of Inert Gases in Solids by : S.E. Donnelly
Download or read book Fundamental Aspects of Inert Gases in Solids written by S.E. Donnelly and published by Springer. This book was released on 2013-12-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Research Workshop on Fundamental Aspects of Inert Gases in Solids, held at Bonas, France from 16-22 September 1990, was the fifth in a series of meetings that have been held in this topic area since 1979. The Consultants' Meeting in that year at Harwell on Rare Gas Behaviour in Metals and Ionic Solids was followed in 1982 by the Jiilich Inter national Symposium on Fundamental Aspects of Helium in Metals. Two smaller meetings have followed-a CECAM organised workshop on Helium Bubbles in Metals was held at Orsay, France in 1986 while in February 1989, a Topical Symposium on Noble Gases in Metals was held in Las Vegas as part of the large TMS/AIME Spring Meeting. As is well known, the dominating feature of inert gas atoms in most solids is their high heat of solution, leading in most situations to an essentially zero solubility and gas-atom precipita tion. In organising the workshop, one particular aim was to target the researchers in the field of inert-gas/solid interactions from three different areas--namely metals, tritides and nuclear fuels-in order to encourage and foster the cross-fertilisation of approaches and ideas. In these three material classes, the behaviour of inert gases in metals has probably been most studied, partly from technological considerations-the effects of helium production via (n, a) reac tions during neutron irradiation are of importance, particularly in a fusion reactor environ ment-and partly from a more fundamental viewpoint.
Book Synopsis Handbook of Generation IV Nuclear Reactors by : Igor Pioro
Download or read book Handbook of Generation IV Nuclear Reactors written by Igor Pioro and published by Woodhead Publishing. This book was released on 2022-12-07 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Generation IV Nuclear Reactors, Second Edition is a fully revised and updated comprehensive resource on the latest research and advances in generation IV nuclear reactor concepts. Editor Igor Pioro and his team of expert contributors have updated every chapter to reflect advances in the field since the first edition published in 2016. The book teaches the reader about available technologies, future prospects and the feasibility of each concept presented, equipping them users with a strong skillset which they can apply to their own work and research. Provides a fully updated, revised and comprehensive handbook dedicated entirely to generation IV nuclear reactors Includes new trends and developments since the first publication, as well as brand new case studies and appendices Covers the latest research, developments and design information surrounding generation IV nuclear reactors
Book Synopsis Serial Reports on Start-up Experiments by : J. Chernick
Download or read book Serial Reports on Start-up Experiments written by J. Chernick and published by . This book was released on 1955 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis High Temperature Oxidation and Corrosion of Metals by : David John Young
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with understanding the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry and alloy composition. The focus is on designing (or selecting) alloy compositions which provide optimal resistance to attack by corrosive gases. . Emphasises quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities and alloy compositions. . Uses phase diagrams and diffusion paths to analyse and interpret scale structures and internal precipitation distributions . Provides a detailed examination of corrosion in industrial gases (water vapour effects, carburisation and metal dusting, sulphidation) . Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data . Combines physical chemistry and materials science methodologies.
