Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Plasma Technology For Deposition And Surface Modification
Download Plasma Technology For Deposition And Surface Modification full books in PDF, epub, and Kindle. Read online Plasma Technology For Deposition And Surface Modification ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Plasma Technology for Deposition and Surface Modification by : Mohammad Mokbul Hossain
Download or read book Plasma Technology for Deposition and Surface Modification written by Mohammad Mokbul Hossain and published by Logos Verlag Berlin GmbH. This book was released on 2009 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing is a high-technology discipline in tailoring surface properties and in obtaining functional polymers of advanced materials without changing the material's bulk. Comparing with solid polymeric materials, special care should be taken for surface activation of textiles due to their complex geometries. It was found that modification is strongly influenced by both plasma parameters and fabric structure. As compared to air, CO2, and water vapor, Ar/O2 and He/O2 mixtures were found to be very effective for surface hydrophilization of polyester textiles due to the long-lasting free radical lifetimes. The modified surfaces were not stable for a long time due to restructuring of the polar functional groups. Therefore, plasma coatings containing functional groups are required in order to obtain a permanent surface modification. Permanent nanoporous coatings were deposited in order to obtain functional surfaces which contain accessible functionalities within the entire coating volume. This novel approach is essentially based on a fine control of simultaneous deposition and etching processes during plasma co-polymerization of ammonia with hydrocarbons. A nanoporous structure with a large specific surface area was achieved that contained functional groups inside the coating volume, which were accessible to e.g. dye molecules, thus facilitating substrate independent dyeing. A permanent hydrophilic modification of material surfaces was obtained by introducing nitrogen polar functionalities, depending on the NH3 to hydrocarbon ratio, which is mostly due to a replacement of carbon in a-C: H: N films. This novel combination of polar groups with a suitable texturing realized within crosslinked aC: H: N coatings proved to be an efficient method providing a long-term mechanical stability of superhydrophilic coatings. Moreover, plasma coated material surfaces contain huge numbers of functional groups which can chemically interact with matrix materials and hence, yield strong covalent bond between fiber and matrix. The coatings show a large surface area which enhances the contact area and surface texturing and additionally promotes mechanical interlocking. Thus, the novel, developed nanoporous coatings represent a platform for diverse multifunctional applications in the surface enhancement of advanced material
Book Synopsis Applications of Plasma Technologies to Material Processing by : Giorgio Speranza
Download or read book Applications of Plasma Technologies to Material Processing written by Giorgio Speranza and published by CRC Press. This book was released on 2019-04-10 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a survey of the latest research and developments in plasma technology. In an easy and comprehensive manner, it explores what plasma is and the technologies utilized to produce plasma. It then investigates the main applications and their benefits. Different from other books on the topic that focus on specific aspects of plasma technology, the intention is to provide an introduction to all aspects related to plasma technologies. This book will be an ideal resource for graduate students studying plasma technologies, in addition to researchers in physics, engineering, and materials science Features Accessible and easy to understand Provides simple yet exhaustive explanations of the foundations Explores the latest technologies and is filled with practical applications and case studies
Book Synopsis Plasma Surface Modification of Polymers: Relevance to Adhesion by : Kash L. Mittal
Download or read book Plasma Surface Modification of Polymers: Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-04-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm
Book Synopsis Handbook of Deposition Technologies for Films and Coatings by : Peter M. Martin
Download or read book Handbook of Deposition Technologies for Films and Coatings written by Peter M. Martin and published by William Andrew. This book was released on 2009-12-01 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 3e, edited by Peter M. Martin, PNNL 2005 Inventor of the Year, is an extensive update of the many improvements in deposition technologies, mechanisms, and applications. This long-awaited revision includes updated and new chapters on atomic layer deposition, cathodic arc deposition, sculpted thin films, polymer thin films and emerging technologies. Extensive material was added throughout the book, especially in the areas concerned with plasma-assisted vapor deposition processes and metallurgical coating applications.
Book Synopsis Plasma Techniques for Film Deposition by : Mitsuharu Konuma
Download or read book Plasma Techniques for Film Deposition written by Mitsuharu Konuma and published by Alpha Science International, Limited. This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Techniques for Film Deposition describes the technology and applications of cold plasma for thin-film deposition. The plasma is generated under low pressure and characterized by a non-thermal equilibrium. An attempt has been made to not only provide an introductory text but also to present the latest techniques and recent results: Fundamentals of plasma science such as its characterization, chemical and physical reactions in plasmas, basic techniques to generate and to diagnose plasmas. Techniques for generating high-density plasmas are outlined like the conventional electrical and magnetic methods, and the modern schemes for inductively coupled and helicon-wave plasmas. Plasma diagnostic methods, such as optical spectroscopy, electrical probes, mass and energy analysis of excited molecules and ions in plasma. Specific techniques are treated for thin-film formation: sputter deposition, ion plating, plasma enhanced chemical vapor deposition and plasma surface modification. Films, like amorphous, nano- and micro-crystalline silicon, polymorphs of carbon, i.e. amorphous phase, diamond, fullerenes and nanotubes, boron and carbon nitrides can be deposited.
Book Synopsis Atmospheric Pressure Plasma for Surface Modification by : Rory A. Wolf
Download or read book Atmospheric Pressure Plasma for Surface Modification written by Rory A. Wolf and published by John Wiley & Sons. This book was released on 2012-11-08 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book's focus and intent is to impart an understanding of the practical application of atmospheric plasma for the advancement of a wide range of current and emerging technologies. The primary key feature of this book is the introduction of over thirteen years of practical experimental evidence of successful surface modifications by atmospheric plasma methods. It offers a handbook-based approach for leveraging and optimizing atmospheric plasma technologies which are currently in commercial use. It also offers a complete treatment of both basic plasma physics and industrial plasma processing with the intention of becoming a primary reference for students and professionals. The reader will learn the mechanisms which control and operate atmospheric plasma technologies and how these technologies can be leveraged to develop in-line continuous processing of a wide variety of substrates. Readers will gain an understanding of specific surface modification effects by atmospheric plasmas, and how to best characterize those modifications to optimize surface cleaning and functionalization for adhesion promotion. The book also features a series of chapters written to address practical surface modification effects of atmospheric plasmas within specific application markets, and a commercially-focused assessment of those effects.
Book Synopsis Handbook of Physical Vapor Deposition (PVD) Processing by : D. M. Mattox
Download or read book Handbook of Physical Vapor Deposition (PVD) Processing written by D. M. Mattox and published by Cambridge University Press. This book was released on 2014-09-19 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of physical vapor deposition (PVD) process technology from the characterizing and preparing the substrate material, through deposition processing and film characterization, to post-deposition processing. The emphasis of the book is on the aspects of the process flow that are critical to economical deposition of films that can meet the required performance specifications. The book covers subjects seldom treated in the literature: substrate characterization, adhesion, cleaning and the processing. The book also covers the widely discussed subjects of vacuum technology and the fundamentals of individual deposition processes. However, the author uniquely relates these topics to the practical issues that arise in PVD processing, such as contamination control and film growth effects, which are also rarely discussed in the literature. In bringing these subjects together in one book, the reader can understand the interrelationship between various aspects of the film deposition processing and the resulting film properties. The author draws upon his long experience with developing PVD processes and troubleshooting the processes in the manufacturing environment, to provide useful hints for not only avoiding problems, but also for solving problems when they arise. He uses actual experiences, called ""war stories"", to emphasize certain points. Special formatting of the text allows a reader who is already knowledgeable in the subject to scan through a section and find discussions that are of particular interest. The author has tried to make the subject index as useful as possible so that the reader can rapidly go to sections of particular interest. Extensive references allow the reader to pursue subjects in greater detail if desired. The book is intended to be both an introduction for those who are new to the field and a valuable resource to those already in the field. The discussion of transferring technology between R&D and manufacturing provided in Appendix 1, will be of special interest to the manager or engineer responsible for moving a PVD product and process from R&D into production. Appendix 2 has an extensive listing of periodical publications and professional societies that relate to PVD processing. The extensive Glossary of Terms and Acronyms provided in Appendix 3 will be of particular use to students and to those not fully conversant with the terminology of PVD processing or with the English language.
Book Synopsis Plasma Surface Modification of Polymers by : Kash L Mittal
Download or read book Plasma Surface Modification of Polymers written by Kash L Mittal and published by CRC Press. This book was released on 2019-12 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasma polymerization, plasma surface modification reactions do not cause thin-film deposition, and can therefore only modify the surface properties of organic substrates. Plasma surface modifications are fast, efficient methods for improving the adhesion properties and other surface characteristics of a variety of polymeric materials. The focus of this volume is on adhesion phenomena, surface properties and the surface characterization of plasma-treated materials. This book opens with a critical review of the plasma surface modification of polymers for improved adhesion. The remainder of the papers are divided into two sections, one dealing with the characterization of plasma-treated surfaces and the second concerned with various practical applications of plasma-treated surfaces
Book Synopsis Film Deposition by Plasma Techniques by : Mitsuharu Konuma
Download or read book Film Deposition by Plasma Techniques written by Mitsuharu Konuma and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of thin films depend strongly upon the deposition technique and conditions chosen. In order to achieve the desired film, optimum deposition conditions have to be found by carrying out experiments in a trial-and error fashion with varying parameters. The data obtained on one growth apparatus are often not transferable to another. This is especially true for film deposition processes using a cold plasma because of our poor under standing of the mechanisms. Relatively precise studies have been carried out on the role that physical effects play in film formation such as sputter deposition. However, there are many open questions regarding processes that involve chemical reactions, for example, reactive sputter deposition or plasma enhanced chemical vapor deposition. Much further research is re quired in order to understand the fundamental deposition processes. A sys tematic collection of basic data, some of which may be readily available in other branches of science, for example, reaction cross sections for gases with energetic electrons, is also required. The need for pfasma deposition techniques is felt strongly in industrial applications because these techniques are superior to traditional thin-film deposition techniques in many ways. In fact, plasma deposition techniques have developed rapidly in the semiconductor and electronics industries. Fields of possible application are still expanding. A reliable plasma reactor with an adequate in situ system for monitoring the deposition conditions and film properties must be developed to improve reproducibility and pro ductivity at the industrial level.
Book Synopsis Plasma Deposition, Treatment, and Etching of Polymers by : Riccardo d'Agostino
Download or read book Plasma Deposition, Treatment, and Etching of Polymers written by Riccardo d'Agostino and published by Elsevier. This book was released on 2012-12-02 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Deposition, Treatment, and Etching of Polymers takes a broad look at the basic principles, the chemical processes, and the diagnostic procedures in the interaction of plasmas with polymer surfaces. This recent technology has yielded a large class of new materials offering many applications, including their use as coatings for chemical fibers and films. Additional applications include uses for the passivation of metals, the surface hardening of tools, increased biocompatibility of biomedical materials, chemical and physical sensors, and a variety of micro- and optoelectronic devices. - Appeals to a broad range of industries from microelectronics to space technology - Discusses a wide array of new uses for plasma polymers - Provides a tutorial introduction to the field - Surveys various classes of plasma polymers, their chemical and morphological properties, effects of plasma process parameters on the growth and structure of these synthetic materials, and techniques for characterization - Interests scientists, engineers, and students alike
Book Synopsis Deposition of Nitride Coatings Using Plasma Surface Modification Technology by :
Download or read book Deposition of Nitride Coatings Using Plasma Surface Modification Technology written by and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this project is to investigate the Plasma Source Ion Implantation (PSII) process as an environmentally clean surface modification technique for defense related applications. Through this grant, considerable progress has been made in the understanding of the science and technology of the PSII process. A co-axial geometry technique has been developed and patented to deposit coatings on the inside surface of hollow cylinders and may have applications in gun barrels and recoil mechanisms. A perforated, staggered cathode configuration has been devised to deposit complex nitride coatings with properties superior to mono-nitrides. Erosion-resistant chrome-oxide coatings have been deposited and an optical emission spectroscopy diagnostic has been successfully used as a diagnostic for plasma chemistry. Enhancement of adhesion of titanium-nitride coatings to steel has been achieved by the use of titanium interlayers. Research has been conducted on wear-resistant diamond-like carbon coatings in collaboration with Army Research Lab. Computer models have been developed to predict plasma-workpiece interaction for different target shapes. The grant has provided the opportunity to establish interactions between the University of Wisconsin and personnel at Rock Island Arsenal, Corpus Christi Army Depot. Army Research Lab, and the Watervliet Arsenal.
Book Synopsis Advanced Plasma Technology by : Riccardo d'Agostino
Download or read book Advanced Plasma Technology written by Riccardo d'Agostino and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: A panel of internationally renowned scientists discuss the latest results in plasma technology. This volume has been compiled with both a didactic approach and an overview of the newest achievements for industrial applications. It is divided into two main sections. One is focused on fundamental technology, including plasma production and control, high-pressure discharges, modeling and simulation, diagnostics, dust control, and etching. The section on application technology covers polymer treatments, silicon solar cell, coating and spray, biomaterials, sterilization and waste treatment, plasma propulsion, plasma display panels, and anti-corrosion coatings. The result is an indispensable work for physicists, chemists and engineers involved in the field of plasma technology.
Book Synopsis Encyclopedia of Plasma Technology - Two Volume Set by : J. Leon Shohet
Download or read book Encyclopedia of Plasma Technology - Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 3082 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Book Synopsis Treatment of wood with siloxanes and metal micro-particle deposition using plasma technology by : Patricia Gascón-Garrido
Download or read book Treatment of wood with siloxanes and metal micro-particle deposition using plasma technology written by Patricia Gascón-Garrido and published by Cuvillier Verlag. This book was released on 2017-10-06 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma treatment is a novel and promising technolgy in the field of wood surface modification. Deposition of micro-particles on wood surfaces by means of plasma is an interesting approach to enhance wood properties and thus, to extend the service life of wood products. On the other hand, several silicone fomulations have been already shown to cause excellent water repellence and interaction with cell wall components, beside to impart high chenical and weathering stability as well as biological resistance in treated wood. Based on that, this study focussed on both treatments seperately in an initial stage of the research; followed by the combination, in a two-step treatment, of vacuum-pressure impregnation of solid wook with siloxanes and additional copper deposition on wood surface using atmostpheric pressure plasma.
Book Synopsis Biodegradable Green Composites by : Susheel Kalia
Download or read book Biodegradable Green Composites written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively addresses surface modification of natural fibers to make them more effective, cost-efficient, and environmentally friendly. Topics include the elucidation of important aspects surrounding chemical and green approaches for the surface modification of natural fibers, the use of recycled waste, properties of biodegradable polyesters, methods such as electrospinning, and applications of hybrid composite materials.
Book Synopsis Plasma Technology for Hyperfunctional Surfaces by : Hubert Rauscher
Download or read book Plasma Technology for Hyperfunctional Surfaces written by Hubert Rauscher and published by John Wiley & Sons. This book was released on 2010-04-16 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a project backed by the European Union, this is a must-have resource for researchers in industry and academia concerned with application-oriented plasma technology research. Clearly divided in three sections, the first part is dedicated to the fundamentals of plasma and offers information about scientific and theoretical plasma topics, plasma production, surface treatment process and characterization. The second section focuses on technological aspects and plasma process applications in textile, food packaging and biomedical sectors, while the final part is devoted to concerns about the environmental sustainability of plasma processes.
Book Synopsis Ion Beam and Plasma Technology Development for Surface Modification at Los Alamos National Laboratory by :
Download or read book Ion Beam and Plasma Technology Development for Surface Modification at Los Alamos National Laboratory written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We are developing two high-throughput technologies for materials modification. The first is a repetitive intense ion beam source for materials modification through rapid surface melt and resolidification (up to 10[sup 10] deg/sec cooling rates) and for ablative deposition of coatings. The short range of the ions (typically 0.1 to 5 micrometers) allows vaporization or melting at moderate beam energy density (typically 1-50 J/cm[sup 2]). A new repetitive intense ion beam accelerator called CHAMP is under development at Los Alamos. The design beam parameters are: E=200 keV, I=15 kA, [tau]=1 [micro]s, and 1 Hz. This accelerator will enable applications such as film deposition, alloying and mixing, cleaning and polishing, corrosion and wear resistance, polymer surface treatments, and nanophase powder synthesis. The second technology is plasma source ion implantation (PSII) using plasmas generated from both gas phase (using radio frequency excitation) and solid phase (using a cathodic arc) sources. We have used PSII to directly implant ions for surface modification or as method for generating graded interfaces to enhance the adhesion of surface coatings. Surfaces with areas of up to 16 m[sup 2] and weighing more than a thousand kilograms have been treated in the Los Alamos PSII chamber. In addition, PSII in combination with cathodic source deposition has been used to form highly adherent, thick Er[sub 2]O[sub 3] coatings on steel for reactive metal containment in casting. These coatings resist delamination under extreme mechanical and thermal stress.
