Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Microcontroller Based Embedded System For Induction Motor Protection
Download Microcontroller Based Embedded System For Induction Motor Protection full books in PDF, epub, and Kindle. Read online Microcontroller Based Embedded System For Induction Motor Protection ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Microcontroller Based Embedded System for Induction Motor Protection by : Das Sharma Kaushik
Download or read book Microcontroller Based Embedded System for Induction Motor Protection written by Das Sharma Kaushik and published by LAP Lambert Academic Publishing. This book was released on 2014-12-10 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction motors are the workhorses of industry because of their roughness and versatility. The use of induction motors in industry is widespread and it can be exposed to different operational environments, manufacturing defects, etc. The present work emphases on the development of a low cost 8051 core microcontroller based system that will monitor the electrical parameter like input voltage, input current and power factor of the line. During any abnormality the developed system will act to ensure the protection of the motor with various fault mitigation algorithms.
Book Synopsis Power System Protection in Smart Grid Environment by : Ramesh Bansal
Download or read book Power System Protection in Smart Grid Environment written by Ramesh Bansal and published by CRC Press. This book was released on 2019-01-15 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: With distributed generation interconnection power flow becoming bidirectional, culminating in network problems, smart grids aid in electricity generation, transmission, substations, distribution and consumption to achieve a system that is clean, safe (protected), secure, reliable, efficient, and sustainable. This book illustrates fault analysis, fuses, circuit breakers, instrument transformers, relay technology, transmission lines protection setting using DIGsILENT Power Factory. Intended audience is senior undergraduate and graduate students, and researchers in power systems, transmission and distribution, protection system broadly under electrical engineering.
Book Synopsis Embedded Microcontroller Interfacing by : Gourab Sen Gupta
Download or read book Embedded Microcontroller Interfacing written by Gourab Sen Gupta and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Signal Embedded Microcontrollers are commonly used in integrating analog components needed to control non-digital electronic systems. They are used in automatically controlled devices and products, such as automobile engine control systems, wireless remote controllers, office machines, home appliances, power tools, and toys. Microcontrollers make it economical to digitally control even more devices and processes by reducing the size and cost, compared to a design that uses a separate microprocessor, memory, and input/output devices. In many undergraduate and post-graduate courses, teaching of mixed-signal microcontrollers and their use for project work has become compulsory. Students face a lot of difficulties when they have to interface a microcontroller with the electronics they deal with. This book addresses some issues of interfacing the microcontrollers and describes some project implementations with the Silicon Lab C8051F020 mixed–signal microcontroller. The intended readers are college and university students specializing in electronics, computer systems engineering, electrical and electronics engineering; researchers involved with electronics based system, practitioners, technicians and in general anybody interested in microcontrollers based projects.
Book Synopsis Microcontroller-based Fuzzy Logic Speed Controller for Three-phase Induction Motor by : Marwan A. A. Badran
Download or read book Microcontroller-based Fuzzy Logic Speed Controller for Three-phase Induction Motor written by Marwan A. A. Badran and published by . This book was released on 2013 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-phase induction motors have been used in a wide range of industry applications; since they are robust, brushless and have simple design. Furthermore, the speed of induction motor can be easily controlled by variable frequency drives. The continuous development in power electronics semiconductors came out with modern electric drives. These drives use high speed power transistors, like IGBT and MOSFET, with various switching techniques. The speed control of induction motor is important to achieve maximum torque and efficiency. In the past decades, conventional control systems, such as proportional-integral derivative (PID) controller, were applied to electric drives to control the speed of induction motor. The PID controller is not a well established control method in motor drive because of the nonlinearity of induction motor. On the other hand, the use of Fuzzy Logic Controller (FLC) improves the performance of the speed control of induction motor. In this research, a microcontroller-based fuzzy logic controller was developed. The FLC replaces the conventional PI controller to improve the speed response of the drive in order to keep the speed of the induction motor constant when the load varies within the operating range. The research also included the design and implementation of a three-phase voltage source inverter (VSI) driven by Space Vector Pulse Width Modulation (SVPWM) signal. The control system in this research was designed using Matlab/Simulink environment. The simulation included a comparison of speed response of FLC and PI controller. The input to FLC is the linguistic variable of speed error and change of speed error, while the output of FLC is the frequency fed to the inverter. The three-phase inverter was fabricated using MOSFET Hex-bridge connected to a low-pass LC-filter to smooth the inverter output voltage wave. In order to apply FLC and generate corresponding SVPWM signals a PIC16F877A microcontroller was used in the control system. The speed controller was tested using various values of input speed using simulation and experiments. The results showed the superiority of the proposed FLC over the conventional PI controller in the dynamics response of speed. The results also showed the ability of the proposed to generate a three-phase sine wave with desired frequency to control the speed of the induction motor with THD less than 5%.
Book Synopsis Microprocessor Based Induction Motor Protection System by : Kameron C. Golding
Download or read book Microprocessor Based Induction Motor Protection System written by Kameron C. Golding and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Microcontroller and Embedded System by : A.K. Singh
Download or read book Microcontroller and Embedded System written by A.K. Singh and published by New Age International. This book was released on 2008 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Practical Aspects of Embedded System Design using Microcontrollers by : Jivan Parab
Download or read book Practical Aspects of Embedded System Design using Microcontrollers written by Jivan Parab and published by Springer Science & Business Media. This book was released on 2008-06-07 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second in the series, Practical Aspects of Embedded System Design using Microcontrollers emphasizes the same philosophy of “Learning by Doing” and “Hands on Approach” with the application oriented case studies developed around the PIC16F877 and AT 89S52, today’s most popular microcontrollers. Readers with an academic and theoretical understanding of embedded microcontroller systems are introduced to the practical and industry oriented Embedded System design. When kick starting a project in the laboratory a reader will be able to benefit experimenting with the ready made designs and ‘C’ programs. One can also go about carving a big dream project by treating the designs and programs presented in this book as building blocks. Practical Aspects of Embedded System Design using Microcontrollers is yet another valuable addition and guides the developers to achieve shorter product development times with the use of microcontrollers in the days of increased software complexity. Going through the text and experimenting with the programs in a laboratory will definitely empower the potential reader, having more or less programming or electronics experience, to build embedded systems using microcontrollers around the home, office, store, etc. Practical Aspects of Embedded System Design using Microcontrollers will serve as a good reference for the academic community as well as industry professionals and overcome the fear of the newbies in this field of immense global importance.
Book Synopsis Digital System Design - Use of Microcontroller by : Shenouda Dawoud
Download or read book Digital System Design - Use of Microcontroller written by Shenouda Dawoud and published by CRC Press. This book was released on 2022-09-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are today, widely deployed in just about every piece of machinery from toasters to spacecraft. Embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but more importantly to satisfy numerous other constraints. To achieve the current goals of design, the designer must be aware with such design constraints and more importantly, the factors that have a direct effect on them.One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand; single-purpose, general-purpose or application specific. Microcontrollers are one member of the family of the application specific processors.The book concentrates on the use of microcontroller as the embedded system?s processor, and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontroller.The book is ideal for undergraduate students and also the engineers that are working in the field of digital system design.Contents• Preface;• Process design metrics;• A systems approach to digital system design;• Introduction to microcontrollers and microprocessors;• Instructions and Instruction sets;• Machine language and assembly language;• System memory; Timers, counters and watchdog timer;• Interfacing to local devices / peripherals;• Analogue data and the analogue I/O subsystem;• Multiprocessor communications;• Serial Communications and Network-based interfaces.
Book Synopsis Abstracts of Proceedings National Conference on Knowledge, Innovations, and Technologies for Sustainability” (NCKITS - 2022) in association with ACM and SCRS Student Chapter by : Dr.K.Reddy Madhavi,Dr.K.Suresh,Dr.D.Ganesh,Dr. B. Narendra Kumar Rao
Download or read book Abstracts of Proceedings National Conference on Knowledge, Innovations, and Technologies for Sustainability” (NCKITS - 2022) in association with ACM and SCRS Student Chapter written by Dr.K.Reddy Madhavi,Dr.K.Suresh,Dr.D.Ganesh,Dr. B. Narendra Kumar Rao and published by GCS PUBLISHERS. This book was released on 2022-11-10 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr.K.Reddy Madhavi,Dr.K.Suresh,Dr.D.Ganesh,Dr. B. Narendra Kumar Rao
Book Synopsis Introduction to Embedded Systems by : Manuel Jiménez
Download or read book Introduction to Embedded Systems written by Manuel Jiménez and published by Springer Science & Business Media. This book was released on 2013-09-11 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook serves as an introduction to the subject of embedded systems design, using microcontrollers as core components. It develops concepts from the ground up, covering the development of embedded systems technology, architectural and organizational aspects of controllers and systems, processor models, and peripheral devices. Since microprocessor-based embedded systems tightly blend hardware and software components in a single application, the book also introduces the subjects of data representation formats, data operations, and programming styles. The practical component of the book is tailored around the architecture of a widely used Texas Instrument’s microcontroller, the MSP430 and a companion web site offers for download an experimenter’s kit and lab manual, along with Powerpoint slides and solutions for instructors.
Book Synopsis Development of a Microcontroller-based Variable Speed Induction Motor Drive Controller by : N. M. Tsang
Download or read book Development of a Microcontroller-based Variable Speed Induction Motor Drive Controller written by N. M. Tsang and published by . This book was released on 1988 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis MSP430-based Robot Applications by : Dan Harres
Download or read book MSP430-based Robot Applications written by Dan Harres and published by Newnes. This book was released on 2013-02-22 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a careful explanation of the basic areas of electronics and computer architecture, along with lots of examples, to demonstrate the interface, sensor design, programming and microcontroller peripheral setup necessary for embedded systems development. With no need for mechanical knowledge of robots, the book starts by demonstrating how to modify a simple radio-controlled car to create a basic robot. The fundamental electronics of the MSP430 are described, along with programming details in both C and assembly language, and full explanations of ports, timing, and data acquisition. Further chapters cover inexpensive ways to perform circuit simulation and prototyping. Key features include: Thorough treatment of the MSP430’s architecture and functionality along with detailed application-specific guidance Programming and the use of sensor technology to build an embedded system A learn-by-doing experience With this book you will learn: The basic theory for electronics design - Analog circuits - Digital logic - Computer arithmetic - Microcontroller programming How to design and build a working robot Assembly language and C programming How to develop your own high-performance embedded systems application using an on-going robotics application Teaches how to develop your own high-performance embedded systems application using an on-going robotics application Thorough treatment of the MSP430’s architecture and functionality along with detailed application-specific guidance Focuses on electronics, programming and the use of sensor technology to build an embedded system Covers assembly language and C programming
Book Synopsis Designing Embedded Systems with PIC Microcontrollers by : Tim Wilmshurst
Download or read book Designing Embedded Systems with PIC Microcontrollers written by Tim Wilmshurst and published by Elsevier. This book was released on 2006-10-24 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems with PIC Microcontrollers: Principles and Applications is a hands-on introduction to the principles and practice of embedded system design using the PIC microcontroller. Packed with helpful examples and illustrations, the book provides an in-depth treatment of microcontroller design as well as programming in both assembly language and C, along with advanced topics such as techniques of connectivity and networking and real-time operating systems. In this one book students get all they need to know to be highly proficient at embedded systems design. This text combines embedded systems principles with applications, using the16F84A, 16F873A and the 18F242 PIC microcontrollers. Students learn how to apply the principles using a multitude of sample designs and design ideas, including a robot in the form of an autonomous guide vehicle. Coverage between software and hardware is fully balanced, with full presentation given to microcontroller design and software programming, using both assembler and C. The book is accompanied by a companion website containing copies of all programs and software tools used in the text and a ‘student’ version of the C compiler. This textbook will be ideal for introductory courses and lab-based courses on embedded systems, microprocessors using the PIC microcontroller, as well as more advanced courses which use the 18F series and teach C programming in an embedded environment. Engineers in industry and informed hobbyists will also find this book a valuable resource when designing and implementing both simple and sophisticated embedded systems using the PIC microcontroller. *Gain the knowledge and skills required for developing today's embedded systems, through use of the PIC microcontroller.*Explore in detail the 16F84A, 16F873A and 18F242 microcontrollers as examples of the wider PIC family.*Learn how to program in Assembler and C.*Work through sample designs and design ideas, including a robot in the form of an autonomous guided vehicle.*Accompanied by a CD-ROM containing copies of all programs and software tools used in the text and a ‘student' version of the C complier.
Book Synopsis Embedded System Design with ARM Cortex-M Microcontrollers by : Cem Ünsalan
Download or read book Embedded System Design with ARM Cortex-M Microcontrollers written by Cem Ünsalan and published by Springer Nature. This book was released on 2022-01-03 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces basic and advanced embedded system topics through Arm Cortex M microcontrollers, covering programmable microcontroller usage starting from basic to advanced concepts using the STMicroelectronics Discovery development board. Designed for use in upper-level undergraduate and graduate courses on microcontrollers, microprocessor systems, and embedded systems, the book explores fundamental and advanced topics, real-time operating systems via FreeRTOS and Mbed OS, and then offers a solid grounding in digital signal processing, digital control, and digital image processing concepts — with emphasis placed on the usage of a microcontroller for these advanced topics. The book uses C language, “the” programming language for microcontrollers, C++ language, and MicroPython, which allows Python language usage on a microcontroller. Sample codes and course slides are available for readers and instructors, and a solutions manual is available to instructors. The book will also be an ideal reference for practicing engineers and electronics hobbyists who wish to become familiar with basic and advanced microcontroller concepts.
Book Synopsis Investigation of Microprocessor Based Motor Protection System for Three Phase Induction Motors by : Graham W. Hall
Download or read book Investigation of Microprocessor Based Motor Protection System for Three Phase Induction Motors written by Graham W. Hall and published by . This book was released on 1984 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Embedded Systems Design with 8051 Microcontrollers by : Zdravko Karakehayov
Download or read book Embedded Systems Design with 8051 Microcontrollers written by Zdravko Karakehayov and published by CRC Press. This book was released on 1999-08-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of developments in microcontroller technology, providing lucid instructions on its many and varied applications. It focuses on the popular eight-bit microcontroller, the 8051, and the 83C552. The text outlines a systematic methodology for small-scale, control-dominated embedded systems, and is accompanied by a disk of all the example problems included in the book.
Book Synopsis Computational Methodologies for Electrical and Electronics Engineers by : Singh, Rajiv
Download or read book Computational Methodologies for Electrical and Electronics Engineers written by Singh, Rajiv and published by IGI Global. This book was released on 2021-03-18 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial intelligence has been applied to many areas of science and technology, including the power and energy sector. Renewable energy in particular has experienced the tremendous positive impact of these developments. With the recent evolution of smart energy technologies, engineers and scientists working in this sector need an exhaustive source of current knowledge to effectively cater to the energy needs of citizens of developing countries. Computational Methodologies for Electrical and Electronics Engineers is a collection of innovative research that provides a complete insight and overview of the application of intelligent computational techniques in power and energy. Featuring research on a wide range of topics such as artificial neural networks, smart grids, and soft computing, this book is ideally designed for programmers, engineers, technicians, ecologists, entrepreneurs, researchers, academicians, and students.
