Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Lignocellulosic Biomass To Ethanol Process Design And Economics Utilizing Co Current Dilute Acid Prehydrolysis And Enzymatic Hydrolysis Current And Futuristic Scenarios
Download Lignocellulosic Biomass To Ethanol Process Design And Economics Utilizing Co Current Dilute Acid Prehydrolysis And Enzymatic Hydrolysis Current And Futuristic Scenarios full books in PDF, epub, and Kindle. Read online Lignocellulosic Biomass To Ethanol Process Design And Economics Utilizing Co Current Dilute Acid Prehydrolysis And Enzymatic Hydrolysis Current And Futuristic Scenarios ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis Current and Futuristic Scenarios by :
Download or read book Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis Current and Futuristic Scenarios written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis Current and Future Scenarios by :
Download or read book Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis Current and Future Scenarios written by and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Renewable Energy Laboratory (NREL) has undertaken a complete review and update of the process design and economic model for the biomass-to-ethanol enzymatic based process. The process design includes the core technologies being researched by the U.S. Department of Energy (DOE): prehydrolysis, simultaneous saccharification and co-fermentation, and cellulase enzyme production. Inaddition, all ancillary areas--feed handling, product recovery and purification, wastewater treatment lignin burner and boiler-turbogenerator, and utilities--are included. NREL engaged Delta-T Corporation to assist in the process design evaluation, equipment costing and overal plant integration. The process design and costing for the lignin burner and boiler turbogenerator has been reviewed byReaction Engineering, Inc. and the wastewater treatment by Merrick & Company. An overview of both reviews is included here. The purpose of this update was to ensure that the process design and equipment costs were reasonable and consistent with good engineering practice for plants of this type using available technical data. This work has resulted in an economic model that can be used to predictthe cost of producing ethanol from cellulosic biomass using this technology if a plant were to be built in the next few years. The model was also extended using technology improvements that are expected to be developed based on the current DOE research plan. Future process designs and cost estimates are given for the year 2005, 2010, 2015.
Book Synopsis Process Design Report for Wood Feedstock by :
Download or read book Process Design Report for Wood Feedstock written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Renewable Energy Laboratory (NREL) has undertaken a complete review and update of the process design and economic model for the biomass-to-ethanol process based on co-current dilute acid prehydrolysis, along with simultaneous saccharification (enzymatic) and co-fermentation. The process design includes the core technologies being researched by the U.S. Department of Energy (DOE): prehydrolysis, simultaneous saccharification and co-fermentation, and cellulase enzyme production.
Book Synopsis Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-Current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis for Corn Stover - Scholar's Choice Edition by : National Renewable Energy Laboratory (Nr
Download or read book Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-Current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis for Corn Stover - Scholar's Choice Edition written by National Renewable Energy Laboratory (Nr and published by Scholar's Choice. This book was released on 2015-02-15 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Book Synopsis Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-Current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis for Corn Stover by :
Download or read book Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co-Current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis for Corn Stover written by and published by . This book was released on 2002 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is an update of NREL's ongoing process design and economic analyses of processes related to developing ethanol from lignocellulosic feedstocks. The U.S. Department of Energy (DOE) is promoting the development of ethanol from lignocellulosic feedstocks as an alternative to conventional petroleum-based transportation fuels. DOE funds both fundamental and applied research in this area and needs a method for predicting cost benefits of many research proposals. To that end, the National Renewable Energy Laboratory (NREL) has modeled many potential process designs and estimated the economics of each process during the last 20 years. This report is an update of the ongoing process design and economic analyses at NREL. We envision updating this process design report at regular intervals; the purpose being to ensure that the process design incorporates all new data from NREL research, DOE funded research and other sources, and that the equipment costs are reasonable and consistent with good engineering practice for plants of this type. For the non-research areas this means using equipment and process approaches as they are currently used in industrial applications. For the last report, published in 1999, NREL performed a complete review and update of the process design and economic model for the biomass-to-ethanol process utilizing co-current dilute acid prehydrolysis with simultaneous saccharification (enzymatic) and co-fermentation. The process design included the core technologies being researched by the DOE: prehydrolysis, simultaneous saccharification and co-fermentation, and cellulase enzyme production. In addition, all ancillary areas--feed handling, product recovery and purification, wastewater treatment (WWT), lignin combustor and boiler-turbogenerator, and utilities--were included. NREL engaged Delta-T Corporation (Delta-T) to assist in the process design evaluation, the process equipment costing, and overall plant integration. The process design and costing for the lignin combustor and boiler turbogenerator was reviewed by Reaction Engineering Inc. (REI) and Merrick & Company reviewed the wastewater treatment. Since then, NREL has engaged Harris Group (Harris) to perform vendor testing, process design, and costing of critical equipment identified during earlier work. This included solid/liquid separation and pretreatment reactor design and costing. Corn stover handling was also investigated to support DOE's decision to focus on corn stover as a feedstock for lignocellulosic ethanol. Working with Harris, process design and costing for these areas were improved through vendor designs, costing, and vendor testing in some cases. In addition to this work, enzyme costs were adjusted to reflect collaborative work between NREL and enzyme manufacturers (Genencor International and Novozymes Biotech) to provide a delivered enzyme for lignocellulosic feedstocks. This report is the culmination of our work and represents an updated process design and cost basis for the process using a corn stover feedstock. The process design and economic model are useful for predicting the cost benefits of proposed research. Proposed research results can be translated into modifications of the process design, and the economic impact can be assessed. This allows DOE, NREL, and other researchers to set priorities on future research with an understanding of potential reductions to the ethanol production cost. To be economically viable, ethanol production costs must be below market values for ethanol. DOE has chosen a target ethanol selling price of $1.07 per gallon as a goal for 2010. The conceptual design and costs presented here are based on a 2010 plant start-up date. The key research targets required to achieve this design and the $1.07 value are discussed in the report.
Book Synopsis Lignocellulosic Biomass to Liquid Biofuels by : Abu Yousuf
Download or read book Lignocellulosic Biomass to Liquid Biofuels written by Abu Yousuf and published by Academic Press. This book was released on 2019-11-20 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulosic Biomass to Liquid Biofuels explores the existing technologies and most recent developments for the production of second generation liquid biofuels, providing an introduction to lignocellulosic biomass and the processes for its conversion into biofuels. The book demonstrates biorefinery concepts compared with petro refinery, as well as the challenges of second generation biofuels processing. In addition to current pre-treatment techniques and their technical, environmental and economic implications, chapters included also further examine the particularities of conversion processes for bioethanol, biobutanol and biodiesel through chemical, biochemical and combined approaches. Finally, the book looks into concepts and tools for techno-economic and environmental analysis, which include supply chain assessment, by-products, zero-waste techniques and process evaluation and optimization. Lignocellulosic Biomass to Liquid Biofuels is particularly useful for researchers in the field of liquid biofuels seeking alternative chemical and biochemical pathways or those interested advanced methods to calculate maximum yield for each process and methods to simulate the implications and costs of scaling up. Furthermore, with the introduction provided by this volume, researchers and graduate students entering the field will be able to quickly get up to speed and identify knowledge gaps in existing and upcoming technology the book’s comprehensive overview. Examines the state-of-the-art technology for liquid biofuels production from lignocellulosic biomass Provides a comprehensive overview of the existing chemical and biochemical processes for second generation biofuel conversion Presents tools for the techno-economic and environmental analysis of technologies, as well as for the scale-up simulation of conversion processes
Download or read book Biofuels written by Ram Sarup Singh and published by CRC Press. This book was released on 2016-11-10 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: This will be a comprehensive multi-contributed reference work, with the Editors being highly regarded alternative fuels experts from India and Switzerland. There will be a strong orientation toward production of biofuels covering such topics as biodiesel from renewable sources, biofuels from biomass, vegetable based feedstocks from biofuel production, global demand for biofuels and economic aspects of biofuel production. Book covers the latest advances in all product areas relative to biofuels. Discusses coverage of public opinion related to biofuels. Chapters will be authored by world class researchers and practitioners in various aspects of biofuels. Provides good comprehensive coverage of biofuels for algae. Presents extensive discussion of future prospects in biofuels.
Book Synopsis Municipal Solid Waste to Energy Conversion Processes by : Gary C. Young
Download or read book Municipal Solid Waste to Energy Conversion Processes written by Gary C. Young and published by John Wiley & Sons. This book was released on 2010-05-24 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: A technical and economic review of emerging waste disposal technologies Intended for a wide audience ranging from engineers and academics to decision-makers in both the public and private sectors, Municipal Solid Waste to Energy Conversion Processes: Economic, Technical, and Renewable Comparisons reviews the current state of the solid waste disposal industry. It details how the proven plasma gasification technology can be used to manage Municipal Solid Waste (MSW) and to generate energy and revenues for local communities in an environmentally safe manner with essentially no wastes. Beginning with an introduction to pyrolysis/gasification and combustion technologies, the book provides many case studies on various waste-to-energy (WTE) technologies and creates an economic and technical baseline from which all current and emerging WTE technologies could be compared and evaluated. Topics include: Pyrolysis/gasification technology, the most suitable and economically viable approach for the management of wastes Combustion technology Other renewable energy resources including wind and hydroelectric energy Plasma economics Cash flows as a revenue source for waste solids-to-energy management Plant operations, with an independent case study of Eco-Valley plant in Utashinai, Japan Extensive case studies of garbage to liquid fuels, wastes to electricity, and wastes to power ethanol plants illustrate how currently generated MSW and past wastes in landfills can be processed with proven plasma gasification technology to eliminate air and water pollution from landfills.
Book Synopsis Product and Process Modelling by : Ian T. Cameron
Download or read book Product and Process Modelling written by Ian T. Cameron and published by Elsevier. This book was released on 2011-08-16 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the area of product and process modelling via a case study approach. It addresses a wide range of modelling applications with emphasis on modelling methodology and the subsequent in-depth analysis of mathematical models to gain insight via structural aspects of the models. These approaches are put into the context of life cycle modelling, where multiscale and multiform modelling is increasingly prevalent in the 21st century. The book commences with a discussion of modern product and process modelling theory and practice followed by a series of case studies drawn from a variety of process industries. The book builds on the extensive modelling experience of the authors, who have developed models for both research and industrial purposes. It complements existing books by the authors in the modelling area. Those areas include the traditional petroleum and petrochemical industries to biotechnology applications, food, polymer and human health application areas. The book highlights to important nature of modern product and process modelling in the decision making processes across the life cycle. As such it provides an important resource for students, researchers and industrial practitioners. Ian Cameron is Professor in Chemical Engineering at the University of Queensland with teaching, research, and consulting activities in process systems engineering. He has a particular interest in process modelling, dynamic simulation, and the application of functional systems perspectives to risk management, having extensive industrial experience in these areas. He continues to work closely with industry and government on systems approaches to process and risk management issues. He received his BE from the University of New South Wales (Australia) and his PhD from imperial College London. He is a Fellow of IChemE. Rafiqul Gani is a Professor of Systems Design at the Department of Chemical and Biochemical Engineering, Technical University of Denmark, and the director of the Computer Aided Product-Process Engineering Center (CAPEC). His research interests include the development of computer-aided methods and tools for modelling, property estimation and process-product synthesis and design. He received his BSc from Bangladesh University of Engineering and Technology in 1975, and his MSc in 1976 and PhD in 1980 from Imperial College London. He is the editor-in-chief of Computers and Chemical Engineering journal and Fellow of IChemE as well as AIChE. Product and process modelling; a wide range of case studies are covered Structural analysis of model systems; insights into structure and solvability Analysis of future developments; potential directions and significant research and development problems to be addressed
Book Synopsis A-Z of Biorefinery by : Nuttha Thongchul
Download or read book A-Z of Biorefinery written by Nuttha Thongchul and published by Elsevier. This book was released on 2021-11-19 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: A-Z of Biorefinery: A Comprehensive View provides a comprehensive book that highlights and illustrates important topics relating to biorefineries, including associated theory, current and future research trends, available techniques and future challenges. This book will benefit a wide range of audiences, including students, engineers, scientists, practitioners, and those who are keen to explore more on biorefinery. Sections cover the availability of current technologies, constraints, market trends, recent system developments, and the concepts that enable modern biorefineries to utilize all kinds of biomass. This book is an essential resource for students, scientists, engineers and practitioners working in industry and academia. Covers the most important topics relating to biorefineries Provides related definitions, theories, overviews of methods, applications and important references Offers perspectives and concise reviews for each section Includes complete design case studies with tutorials
Book Synopsis Integrated Gasification Combined Cycle (IGCC) Technologies by : Ting Wang
Download or read book Integrated Gasification Combined Cycle (IGCC) Technologies written by Ting Wang and published by Woodhead Publishing. This book was released on 2016-11-26 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Gasification Combined Cycle (IGCC) Technologies discusses this innovative power generation technology that combines modern coal gasification technology with both gas turbine and steam turbine power generation, an important emerging technology which has the potential to significantly improve the efficiencies and emissions of coal power plants. The advantages of this technology over conventional pulverized coal power plants include fuel flexibility, greater efficiencies, and very low pollutant emissions. The book reviews the current status and future developments of key technologies involved in IGCC plants and how they can be integrated to maximize efficiency and reduce the cost of electricity generation in a carbon-constrained world. The first part of this book introduces the principles of IGCC systems and the fuel types for use in IGCC systems. The second part covers syngas production within IGCC systems. The third part looks at syngas cleaning, the separation of CO2 and hydrogen enrichment, with final sections describing the gas turbine combined cycle and presenting several case studies of existing IGCC plants. Provides an in-depth, multi-contributor overview of integrated gasification combined cycle technologies Reviews the current status and future developments of key technologies involved in IGCC plants Provides several case studies of existing IGCC plants around the world
Book Synopsis Food, Agriculture and the Environment by : Edi Defrancesco
Download or read book Food, Agriculture and the Environment written by Edi Defrancesco and published by FrancoAngeli. This book was released on 2005 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Industrial Scale Natural Products Extraction by : Hans-Jörg Bart
Download or read book Industrial Scale Natural Products Extraction written by Hans-Jörg Bart and published by John Wiley & Sons. This book was released on 2011-08-08 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the latest technologies in process engineering, this handbook and ready reference features high pressure processing, alternative solvents and processes, extraction technologies and biotransformations -- describing greener, more efficient and sustainable techniques. The result is an expert account of engineering details from lab-scale experiments to large-scale industrial design. The major focus is on the engineering aspects of extraction with organic and supercritical solvents, ionic liquids or surfactant solutions, and is supplemented by aspects of both up- and downstream processing, biotransformation, as well as a survey of typical products in food, pharmaceutical and cosmetic applications. This is rounded off by market developments, economic considerations and regulations requirements in the field Authored by experts from leading industrial and academic institutions, this is essential reading for the hands-on scientist and office manager alike.
Book Synopsis Green Energy to Sustainability: Strategies for Global Industries by : Alain A. Vertes
Download or read book Green Energy to Sustainability: Strategies for Global Industries written by Alain A. Vertes and published by John Wiley & Sons. This book was released on 2020-03-25 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the latest advances in biofuel manufacturing technologies and discusses the deployment of other renewable energy for transportation Aimed at providing an interface useful to business and scientific managers, this book focuses on the key challenges that still impede the realization of the billion-ton renewable fuels vision. It places great emphasis on a global view of the topic, reviewing deployment and green energy technology in different countries across Africa, Asia, South America, the EU, and the USA. It also integrates scientific, technological, and business development perspectives to highlight the key developments that are necessary for the global replacement of fossil fuels with green energy solutions. Green Energy to Sustainability: Strategies for Global Industries examines the most recent developments in biofuel manufacturing technologies in light of business, financial, value chain, and supply chain concerns. It also covers the use of other renewable energy sources like solar energy for transportation and proposes a view of the challenges over the next two to five decades, and how these will deeply modify the industrial world in the third millennium. The coming of age of electric vehicles is also looked at, as is the impact of their deployment on the biomass to biofuels value chain. Offers extensive updates on the field of green energy for global industries Covers the structure of the energy business; chemicals and diesel from biomass; ethanol and butanol; hydrogen and methane; and more Provides an expanded focus on the next generation of energy technologies Reviews the latest advances in biofuel manufacturing technologies Integrates scientific, technological and business perspectives Highlights important developments needed for replacing fossil fuels with green energy Green Energy to Sustainability: Strategies for Global Industries will appeal to academic researchers working on the production of fuels from renewable feedstocks and those working in green and sustainable chemistry, and chemical/process engineering. It is also an excellent textbook for courses in bioprocessing technology, renewable resources, green energy, and sustainable chemistry.
Book Synopsis Integrated Biorefineries by : Paul R. Stuart
Download or read book Integrated Biorefineries written by Paul R. Stuart and published by CRC Press. This book was released on 2012-12-10 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Biorefineries: Design, Analysis, and Optimization examines how to create a competitive edge in biorefinery innovation through integration into existing processes and infrastructure. Leading experts from around the world working in design, synthesis, and optimization of integrated biorefineries present the various aspects of this complex
Book Synopsis An Introduction to Bioreactor Hydrodynamics and Gas-Liquid Mass Transfer by : Enes Kadic
Download or read book An Introduction to Bioreactor Hydrodynamics and Gas-Liquid Mass Transfer written by Enes Kadic and published by John Wiley & Sons. This book was released on 2014-03-14 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews and compares the major types of bioreactors, defines their pros and cons, and identifies research needs and figures of merit that have yet to be addressed Describes common modes of operation in bioreactors Covers the three common bioreactor types, including stirred-tank bioreactors, bubble column bioreactors, and airlift bioreactors Details less common bioreactors types, including fixed bed bioreactors and novel bioreactor designs Discusses advantages and disadvantages of each bioreactor and provides a procedure for optimal bioreactor selection based on current process needs Reviews the problems of bioreactor selection globally while considering all bioreactor options rather than concentrating on one specific bioreactor type
Book Synopsis Biotechnology for Fuels and Chemicals by : Mark Finkelstein
Download or read book Biotechnology for Fuels and Chemicals written by Mark Finkelstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1189 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the Twenty-Third Symposium, we sustained the tradition of providing an informal, congenial atmosphere that our participants find conducive to pursuing technical discussion of program topics. The techni cal program consisted of six sessions with 38 oral presentations, a roundtable forum, two special topic discussions and a poster session con sisting of 230 posters. A special luncheon talk on "Natural Capitalism" by Karl Rabago of the Rocky Mountain Institute was particularly enlightening. More infor mation on these provocative approaches to resources and societal needs can be found at their website, www.rmi.org. While plant biotechnology and genetically modified organisms (GMOs) for enzyme production and designer biomass emerged as exciting areas throughout the Symposium, the frank exchange in the special topic sessions indicated the importance of thinking beyond the purely technical details in this important research area. The preface for each session is included in the introductions. Session Chairpersons and Co-Chairpersons Session 1: Advances in Biomass Production and Processing Chair: Sharon Shoemaker, University of California, Davis, CA Co-Chair: David Boron, US Department of Energy, Washington DC Session 2: Enzyme and Microbial Biocatalysts Chair: Elba Bon, Chemistry Institute, UFRI, Rio de Janeiro, Brazil Co-Chair: Steve Picataggio, Dupont Central, Wilmington, DE Session 3: Bioprocess Research and Development Chair: Guido Zacchi, University of Lund, Lund, Sweden Co-Chair: Mark Holtzapple, Texas A&M University, College Station, TX Session 4: Oil and Ethanol: An Excellent Mix? Chair: Carol Tombari, Mountain Energy Consultation LLC, Conifer, CO Session 5: Emerging Biorefinery Opportunities