Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Ion Beam Surface Treatment A New Technique For Thermally Modifying Surfaces Using Intense Pulsed Ion Beams
Download Ion Beam Surface Treatment A New Technique For Thermally Modifying Surfaces Using Intense Pulsed Ion Beams full books in PDF, epub, and Kindle. Read online Ion Beam Surface Treatment A New Technique For Thermally Modifying Surfaces Using Intense Pulsed Ion Beams ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Download or read book Ion Beam Surface Treatment written by and published by . This book was released on 1995 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emerging capability to produce high average power (10--300 kW) pulsed ion beams at 0.2-2 MeV energies is enabling us to develop a new, commercial-scale thermal surface treatment technology called Ion Beam Surface Treatment (IBEST). This new technique uses high energy, pulsed ((less-than or equal to)500 ns) ion beams to directly deposit energy in the top 1--20 micrometers of the surface of any material. The depth of treatment is controllable by varying the ion energy and species. Deposition of the energy in a thin surface layer allows melft of the layer with relatively small energies (1--10J/cm2) and allows rapid cooling of the melted layer by thermal conduction into the underlying substrate. Typical cooling rates of this process (109 K/sec) are sufficient to cause amorphous layer formation and the production of non-equilibrium microstructures (nanocrystalline and metastable phases). Results from initial experiments confirm surface hardening, amorphous layer and nanocrystalline grain size formation, corrosion resistance in stainless steel and aluminum, metal surface polishing, controlled melt of ceramic surfaces, and surface cleaning and oxide layer removal as well as surface ablation and redeposition. These results follow other encouraging results obtained previously in Russia using single pulse ion beam systems. Potential commercialization of this surface treatment capability is made possible by the combination of two new technologies, a new repetitive high energy pulsed power capability (0.2-2MV, 25--50 kA, 60 ns, 120 Hz) developed at SNL, and a new repetitive ion beam system developed at Cornell University.
Book Synopsis Manufacturing Techniques for Materials by : T.S. Srivatsan
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 1091 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Ion Beam Surface Treatment written by and published by . This book was released on 1994 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emerging capability to produce high average power (5--350 kW) pulsed ion beams at 0.2--2 MeV energies is enabling the authors to develop a new, commercial-scale thermal surface treatment technology called Ion Beam Surface Treatment (IBEST). This new technique uses high energy, pulsed ((less-than or equal to)250 ns) ion beams to directly deposit energy in the top 2--20 micrometers of the surface of any material. The depth of treatment is controllable by varying the ion energy and species. Deposition of the energy with short pulses in a thin surface layer allows melting of the layer with relatively small energies and allows rapid cooling of the melted layer by thermal diffusion into the underlying substrate. Typical cooling rates of this process (109--101° K/sec) cause rapid resolidification, resulting in the production of non-equilibrium microstructures (nano-crystalline and metastable phases) that have significantly improved corrosion, wear, and hardness properties. The authors conducted IBEST feasibility experiments with results confirming surface hardening, noncrystalline grain formation, metal surface polishing, controlled melt of ceramic surfaces, and surface cleaning using pulsed ion beams.
Book Synopsis Advances in High Voltage Engineering by : A. Haddad
Download or read book Advances in High Voltage Engineering written by A. Haddad and published by IET. This book was released on 2004 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the very latest research and development issues in high voltage technology, specifically covering developments throughout the past decade. It is intended as a reference source for researchers and students in the field, but the unique blend of expert authors and comprehensive subject coverage means that this book is also ideally suited as a reference source for engineers and academics in the field for years to come.
Download or read book Ion Beam Surface Treatment written by and published by . This book was released on 1994 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emerging capability to produce high average power (5--250 kW) pulsed ion beams at 0.2--2 MeV energies is enabling us to develop a new, commercial-scale thermal surface treatment technology called Ion Beam Surface Treatment (IBEST). This technique uses high energy, pulsed ((less-than or equal to)100 ns) ion beams to directly deposit energy in the top 2--20 micrometers of the surface of any material. Depth of treatment is controllable by varying the ion energy and species. Deposition of the energy with short pulses in a thin surface layer allows melting of the layer with relatively small energies and allows rapid cooling of the melted layer by thermal diffusion into the underlying substrate. Typical cooling rates of this process (109101° K/sec) cause rapid resolidification, resulting in production of non-equilibrium microstructures (nano-crystalline and metastable phases) that have significantly improved corrosion, wear, and hardness properties. We have conducted IBEST feasibility experiments with results confirming surface hardening, nanocrystaline grain formation, metal surface polishing, controlled melt of ceramic surfaces, and surface cleaning.
Book Synopsis Modeling of Ion Beam Surface Treatment by :
Download or read book Modeling of Ion Beam Surface Treatment written by and published by . This book was released on 1996 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of intense pulsed ion beams is providing a new capability for surface engineering based on rapid thermal processing of the top few microns of metal, ceramic, and glass surfaces. The Ion Beam Surface Treatment (IBEST) process is shown to produce enhancements in the hardness, corrosion, wear, and fatigue properties of surfaces by rapid melt and resolidification. We have created a new coe IBMOD that enables modeling of intense ion beam deposition and the resulting rapid thermal cycling of surfaces. This code has been used to model the effect of treatment of Al, Fe, and Ti using different ion species and pulse durations.
Book Synopsis Energy Materials Coordinating Committe (EMaCC): Fiscal Year 1997 Annual Technical Report by :
Download or read book Energy Materials Coordinating Committe (EMaCC): Fiscal Year 1997 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digest of Technical Papers written by and published by . This book was released on 1995 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Surface Modification and Alloying by : J.M. Poate
Download or read book Surface Modification and Alloying written by J.M. Poate and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an outcome of the NATO institute on surface modification which was held in Trevi, 1981. Surface modification and alloying by ion, electron or laser beams is proving to be one of the most burgeoning areas of materials science. The field covers such diverse areas as integrated circuit processing to fabricating wear and corrosion resistant surfaces on mechanical components. The common scientific questions of interest are the microstructures by the different energy deposition techniques. and associated physical properties produced The chapters constitute a critical review of the various subjects covered at Trevi. Each chapter author took responsibility for the overall review and used contributions from the many papers presented at the meeting; each participant gave a presentation. The contributors are listed at the start of each chapter. We took this approach to get some order in a large and diverse field. We are indebted to all the contributors, in particular the chapter authors for working the many papers into coherent packages; to Jim Mayer for hosting a workshop of chapter authors at Cornell and to Ian Bubb who did a sterling job in working over some of the manuscripts. Our special thanks are due to the text processing center at Bell Labs who took on the task of assembling the book. In particular Karen Lieb and Beverly Heravi typed the whole manuscript and had the entire book phototypeset using the Bell Laboratories UNIXTM system.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-10 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Energy Materials Coordinating Committe (EMaCC): Fiscal Year 1996 Annual Technical Report by :
Download or read book Energy Materials Coordinating Committe (EMaCC): Fiscal Year 1996 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Use of Intense Ion Beams for Surface Modification and Creation of New Materials by :
Download or read book Use of Intense Ion Beams for Surface Modification and Creation of New Materials written by and published by . This book was released on 2002 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: We have conducted surface treatment and alloying experiments with Al, Fe, and Ti-based metals on the RHEPP-1 accelerator (0.8 MV, 20 W, 80 ns FHWM, up to 1 Hz repetition rate) at Sandia National Laboratories. Ions are generated by the MAP gas-breakdown active anode, which can yield a number of different beam species including H, N, and C, depending upon the injected gas. Beams of intense pulsed high-power ion beams have been used to produce surface modification by changes in microstructure caused by rapid heating and cooling of the surface. Increase of beam power leads to ablation of a target surface, and redeposition of ablated material onto a separate substrate. Experiments are described in which ion beams are used in an attempt to increase high-voltage breakdown of a treated surface. Surface alloying of coated Pt and Hf layers is also described. This mixing of a previously deposited thin-film layer into a Ti-alloy substrate leads to significantly enhanced surface wear durability, compared to either untreated Ti-alloy alone, or the Ti alloy alone treated with the ion beam. Thin-film layers have been produced from a number of target materials. Films of fine-grain Pt and Er are described, and are compared to conventionally formed films. First attempts to form high-dielectric constant BaTiO3 are described.
Book Synopsis Materials Synthesis and Processing Using Ion Beams: Volume 316 by : Robert J. Culbertson
Download or read book Materials Synthesis and Processing Using Ion Beams: Volume 316 written by Robert J. Culbertson and published by . This book was released on 1994-03-15 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Book Synopsis Ion Beam and Plasma Technology Development for Surface Modification at Los Alamos National Laboratory by :
Download or read book Ion Beam and Plasma Technology Development for Surface Modification at Los Alamos National Laboratory written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We are developing two high-throughput technologies for materials modification. The first is a repetitive intense ion beam source for materials modification through rapid surface melt and resolidification (up to 10[sup 10] deg/sec cooling rates) and for ablative deposition of coatings. The short range of the ions (typically 0.1 to 5 micrometers) allows vaporization or melting at moderate beam energy density (typically 1-50 J/cm[sup 2]). A new repetitive intense ion beam accelerator called CHAMP is under development at Los Alamos. The design beam parameters are: E=200 keV, I=15 kA, [tau]=1 [micro]s, and 1 Hz. This accelerator will enable applications such as film deposition, alloying and mixing, cleaning and polishing, corrosion and wear resistance, polymer surface treatments, and nanophase powder synthesis. The second technology is plasma source ion implantation (PSII) using plasmas generated from both gas phase (using radio frequency excitation) and solid phase (using a cathodic arc) sources. We have used PSII to directly implant ions for surface modification or as method for generating graded interfaces to enhance the adhesion of surface coatings. Surfaces with areas of up to 16 m[sup 2] and weighing more than a thousand kilograms have been treated in the Los Alamos PSII chamber. In addition, PSII in combination with cathodic source deposition has been used to form highly adherent, thick Er[sub 2]O[sub 3] coatings on steel for reactive metal containment in casting. These coatings resist delamination under extreme mechanical and thermal stress.
Book Synopsis Ion Beam Modification of Solids by : Werner Wesch
Download or read book Ion Beam Modification of Solids written by Werner Wesch and published by Springer. This book was released on 2016-07-14 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the method of ion beam modification of solids in realization, theory and applications in a comprehensive way. It provides a review of the physical basics of ion-solid interaction and on ion-beam induced structural modifications of solids. Ion beams are widely used to modify the physical properties of materials. A complete theory of ion stopping in matter and the calculation of the energy loss due to nuclear and electronic interactions are presented including the effect of ion channeling. To explain structural modifications due to high electronic excitations, different concepts are presented with special emphasis on the thermal spike model. Furthermore, general concepts of damage evolution as a function of ion mass, ion fluence, ion flux and temperature are described in detail and their limits and applicability are discussed. The effect of nuclear and electronic energy loss on structural modifications of solids such as damage formation, phase transitions and amorphization is reviewed for insulators and semiconductors. Finally some selected applications of ion beams are given.
Download or read book Metals Abstracts written by and published by . This book was released on 1999-04 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
