Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Investigation Into Expanding The Operating Range In A Gasoline Fueled Negative Valve Overlap Hcci Engine
Download Investigation Into Expanding The Operating Range In A Gasoline Fueled Negative Valve Overlap Hcci Engine full books in PDF, epub, and Kindle. Read online Investigation Into Expanding The Operating Range In A Gasoline Fueled Negative Valve Overlap Hcci Engine ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Investigation Into Expanding the Operating Range in a Gasoline Fueled Negative Valve Overlap HCCI Engine by : Dennis G. Nitz
Download or read book Investigation Into Expanding the Operating Range in a Gasoline Fueled Negative Valve Overlap HCCI Engine written by Dennis G. Nitz and published by . This book was released on 2008 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Investigating the Effects of Direct Fuel Injection During the Negative Value Overlap Period in a Gasoline Fueled HCCI Engine by : John O. Waldman
Download or read book Investigating the Effects of Direct Fuel Injection During the Negative Value Overlap Period in a Gasoline Fueled HCCI Engine written by John O. Waldman and published by . This book was released on 2006 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Gasoline-like Fuel Effects on High-load, Boosted HCCI Combustion Employing Negative Valve Overlap Strategy by :
Download or read book Gasoline-like Fuel Effects on High-load, Boosted HCCI Combustion Employing Negative Valve Overlap Strategy written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years a number of studies have demonstrated that boosted operation combined with external EGR is a path forward for expanding the high load limit of homogeneous charge compression ignition (HCCI) operation with the negative valve overlap (NVO) valve strategy. However, the effects of fuel composition with this strategy have not been fully explored. In this study boosted HCCI combustion is investigated in a single-cylinder research engine equipped with direct injection (DI) fueling, cooled external exhaust gas recirculation (EGR), laboratory pressurized intake air, and a fully-variable hydraulic valve actuation (HVA) valve train. Three fuels with significant compositional differences are investigated: regular grade gasoline (RON = 90.2), 30% ethanol-gasoline blend (E30, RON = 100.3), and 24% iso-butanol-gasoline blend (IB24, RON = 96.6). Results include engine loads from 350 to 800 kPa IMEPg for all fuels at three engine speeds 1600, 2000, and 2500 rpm. All operating conditions achieved thermal efficiency (gross indicated efficiency) between 38 and 47%, low NOX emissions (0.1 g/kWh), and high combustion efficiency (96.5%). Detailed sweeps of intake manifold pressure (atmospheric to 250 kPaa), EGR (0 25% EGR), and injection timing are conducted to identify fuel-specific effects. The major finding of this study is that while significant fuel compositional differences exist, in boosted HCCI operation only minor changes in operational conditions are required to achieve comparable operation for all fuels. In boosted HCCI operation all fuels were able to achieve matched load-speed operation, whereas in conventional SI operation the fuel-specific knock differences resulted in significant differences in the operable load-speed space. Although all fuels were operable in boosted HCCI, the respective air handling requirements are also discussed, including an analysis of the demanded turbocharger efficiency.
Book Synopsis Effects of Negative Valve Overlap on HCCI Combustion and Its Use in the Control of HCCI Combustion Timing by : Alexander E. Schramm
Download or read book Effects of Negative Valve Overlap on HCCI Combustion and Its Use in the Control of HCCI Combustion Timing written by Alexander E. Schramm and published by . This book was released on 2014 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI) combustion can produce higher efficiencies and lower emissions when compared to tradition spark or compression ignition engines. This study reports an experimental investigation into the effects of valve timings on HCCI combustion conditions. Using a single cylinder engine with state-of-the-art electromagnetic variable valve timing (EVVT) fully independent valves, a series of tests are conducted with varying negative valve overlap (NVO). The in-cylinder residual trapped by the NVO causes an advance in combustion timing, a shortening of burn duration as well as increase in load and increase in brake specific fuel consumption. Asymmetric valve timings are also investigated and show complex behavior with high sensitivity of combustion timing in certain operating ranges. Finally, these strategies are implemented as a set of feedback controllers including a proportional-integral (PI) controller and a feedforward with integral action controller. Both controllers have good tracking for step changes in combustion timing setpoint with the feedforward controller providing a rise time of just four cycles.
Book Synopsis Fuel Effect on HCCI Engine with Negative Valve Overlap by : Keitaro Okuno
Download or read book Fuel Effect on HCCI Engine with Negative Valve Overlap written by Keitaro Okuno and published by . This book was released on 2009 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Fuel Effects on Homogeneous Charge Compression Ignition Combustion by : Jacob Richard Zuehl
Download or read book Fuel Effects on Homogeneous Charge Compression Ignition Combustion written by Jacob Richard Zuehl and published by . This book was released on 2009 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Expanding Robust HCCI Operation with Advanced Valve and Fuel Control Technologies by :
Download or read book Expanding Robust HCCI Operation with Advanced Valve and Fuel Control Technologies written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Delphi Automotive Systems and ORNL established this CRADA to advance the commercialization potential of the homogeneous charge compression ignition (HCCI) advanced combustion strategy for gasoline engine platforms. HCCI combustion has been shown by others to produce high diesel-like efficiency on a gasoline engine platform while simultaneously producing low NOX and particulate matter emissions. However, the commercialization barriers that face HCCI combustion are significant, with requirements for a more active engine control system, likely with next-cycle closed-loop feedback control, and with advanced valve train technologies to enable negative valve overlap conditions. In the partnership between Delphi and ORNL, each organization brought a unique and complementary set of skills to the project. Delphi has made a number of breakthroughs with production-intent valve train technologies and controls in recent years to make a part time production-intent HCCI engine plausible. ORNL has extensive knowledge and expertise with HCCI combustion, and also has a versatile research engine with hydraulic valve actuation (HVA) that is useful for guiding production of a cam-based HCCI system. Partnering these knowledge bases and capabilities was essential towards making progress to better understand HCCI combustion and the commercialization barriers that it faces. ORNL and Delphi maintained strong collaboration throughout the project. Meetings were held regularly, with additional reports, presentations, and meetings as necessary to maintain progress. Delphi provided guidance to ORNL regarding operational strategies to investigate on their single-cylinder research engine with HVA and data from their experimental multi-cylinder engine for modeling. ORNL provided single-cylinder engine data and modeling results.
Book Synopsis HCCI and CAI Engines for the Automotive Industry by : Hua Zhao
Download or read book HCCI and CAI Engines for the Automotive Industry written by Hua Zhao and published by CRC Press. This book was released on 2007-09-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.
Book Synopsis Analysis of Stratified Charge Operation and Negative Valve Overlap Operation Using Direct Fuel Injection in Homogeneous Charge Compression Ignition Engines by : Tanet Aroonsrisopon
Download or read book Analysis of Stratified Charge Operation and Negative Valve Overlap Operation Using Direct Fuel Injection in Homogeneous Charge Compression Ignition Engines written by Tanet Aroonsrisopon and published by . This book was released on 2006 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Hcci and Cai Engines for the Automotive Industry by : H Zhao
Download or read book Hcci and Cai Engines for the Automotive Industry written by H Zhao and published by Elsevier. This book was released on 2007-08-02 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality.HCCI and CAI engines for the automotive industry presents the state-of-the-art in research and development on an international basis, as a one-stop reference work. The background to the development of HCCI / CAI engine technology is described. Basic principles, the technologies and their potential applications, strengths and weaknesses, as well as likely future trends and sources of further information are reviewed in the areas of gasoline HCCI / CAI engines; diesel HCCI engines; HCCI / CAI engines with alternative fuels; and advanced modelling and experimental techniques. The book provides an invaluable source of information for scientific researchers, R&D engineers and managers in the automotive engineering industry worldwide. - Presents the state-of-the-art in research and development on an international basis - An invaluable source of information for scientific researchers, R&D engineers and managers in the automotive engineering industry worldwide - Looks at one of the most promising engine technologies around
Book Synopsis Functional Reverse Engineering of Strategic and Non-Strategic Machine Tools by : Wasim Ahmed Khan
Download or read book Functional Reverse Engineering of Strategic and Non-Strategic Machine Tools written by Wasim Ahmed Khan and published by CRC Press. This book was released on 2021-06-21 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes capacity building in strategic and non-strategic machine tool technology. It includes machine building in sectors such as machine tools, automobiles, home appliances, energy, and biomedical engineering, along with case studies. The book offers guidelines for capacity building in academia, covering how to promote enterprises of functional reverse engineering enterprises. It also discusses machine tool development, engineering design, prototyping of strategic, and non-strategies machine tools, as well as presenting communication strategies and IoT, along with case studies. Professionals from the CNC (Computer Numeric Control) machine tools industry, industrial and manufacturing engineers, and students and faculty in engineering disciplines will find interest in this book.
Book Synopsis Ignition Behavior of Gasolines and Surrogate Fuels in Low Temperature Combustion Strategies by : Vickey Kalaskar
Download or read book Ignition Behavior of Gasolines and Surrogate Fuels in Low Temperature Combustion Strategies written by Vickey Kalaskar and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation discusses the results from three different studies aimed at understanding the importance of fuel chemical structure during low temperature combustion (LTC) strategies, like homogeneous charge compression ignition (HCCI) and partially premixed combustion (PPC) employed in internal combustion (IC) engines wherein the focus is on high octane fuels. Boosted intake air operation combined with exhaust gas recirculation, internal as well as external, has become a standard path for expanding the load limits of IC engines employing LTC strategies mentioned above as well as conventional diesel and spark ignition (SI) engines. However, the effects of fuel compositional variation have not been fully explored. The first study focusses on three different fuels, where each of them were evaluated using a single cylinder boosted HCCI engine using negative valve overlap. The three fuels investigated were: a regular grade gasoline (RON = 90.2), 30% ethanol-gasoline blend (E30, RON = 100.3), and 24% iso-butanol-gasoline blend (IB24, RON = 96.6). Detailed sweeps of intake manifold pressure (atmospheric to 250 kPaa), EGR (0 -- 25% EGR), and injection timing were conducted to identify fuel-specific effects. While significant fuel compositional differences existed, the results showed that all these fuels achieved comparable operation with minor changes in operational conditions. Further, it was shown that the available enthalpy from the exhaust would not be sufficient to satisfy the boost requirements at higher load operation by doing an analysis of the required turbocharger efficiency. While the first study concentrated on load expansion of HCCI, it is important to mention that controlling LTC strategies is difficult under low load or idle operating conditions. To ensure stable operation, fuel injection in the negative valve overlap (NVO) is used as one of method of achieving combustion control. However the combustion chemistry under high temperature and fuel rich conditions that exist during the NVO have not been previously explored. The second study focused on examining the products of fuel rich chemistry as a result of fuel injection in the NVO. In this study, a unique six stroke cycle was used to segregate the exhaust from the NVO and to study the chemistry of the range of fuels injected during NVO under low oxygen conditions. The fuels investigated were methanol, ethanol, iso-butanol, and iso-octane. It was observed that the products of reactions under NVO conditions were highly dependent on the injected fuel's structure with iso-octane producing less than 1.5% hydrogen and methanol producing more than 8%. However a weak dependence was observed on NVO duration and initial temperature, indicating that NVO reforming was kinetically limited. Finally, the experimental trends were compared with CHEMKIN (single zone, 0-D model) predictions using multiple kinetic mechanism that were readily available through literature. Due to the simplicity of the model and inadequate information on the fuel injection process, the experimental data was not modeled well with the mechanisms tested. Some of the shortcomings of the 0-D model were probably due to the model ignoring temperature and composition spatial inhomogeneities and evaporative cooling from fuel vaporization.Though the results from the NVO injection and boosted NVO-HCCI studies are enlightening, the fundamentals of the autoignition behavior of gasoline, alcohols, and their mixtures are not entirely understood despite the interest in high octane fuels in compression engines from a point of view of better thermal efficiency. The third study focused on higher octane blends consisting of binary and ternary mixtures of n-heptane and/or iso-octane, and a fuel of interest. These fuels of interest were toluene, ethanol, and iso-butanol. In this study, the autoignition of such blends is studied under lean conditions ([phi] = 0.25) with varying intake pressure (atmospheric to 3 bar, abs) and at a constant intake temperature of 155 °C. The blends consisted of varying percentages of fuels of interest and their research octane number (RON) approximately estimated at 100 and 80. For comparison, neat iso-octane was selected as RON 100 fuel and PRF 80 blend was selected as RON 80 fuel. It was observed that the blends with a higher percentage of n-heptane showed a stronger tendency to autoignite at lower intake pressures. However, as the intake pressure was increased, the non-reactive components, in this case, the higher octane blend components (toluene, ethanol, and iso-butanol), reduced this tendency subsequently delaying the critical compression ratio (CCR) of the blends. The heat release analysis revealed that the higher octane components in the blends reduced the low temperature reactivity of n-heptane and iso-octane. GC-MS and GC-FID analysis of the partially compressed fuel also indicated that the higher octane components did affect the conversion of the more reactive components, n-heptane and iso-octane, into their partially oxidized branched hydrocarbons in the binary/ternary blends, and reduced the overall reactivity which resulted in a delayed CCR at higher intake pressures.
Book Synopsis Homogeneous Charge Compression Ignition Engines, 2007 by :
Download or read book Homogeneous Charge Compression Ignition Engines, 2007 written by and published by . This book was released on 2007 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis HCCI Load Expansion Opportunities Using a Fully Variable HVA Research Engine to Guide Development of a Production Intent Cam-based VVA Engine by :
Download or read book HCCI Load Expansion Opportunities Using a Fully Variable HVA Research Engine to Guide Development of a Production Intent Cam-based VVA Engine written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: While the potential emissions and efficiency benefits of HCCI combustion are well known, realizing the potentials on a production intent engine presents numerous challenges. In this study we focus on identifying challenges and opportunities associated with a production intent cam-based variable valve actuation (VVA) system on a multi-cylinder engine in comparison to a fully flexible, naturally aspirated, hydraulic valve actuation (HVA) system on a single-cylinder engine, with both platforms sharing the same GDI fueling system and engine geometry. The multi-cylinder production intent VVA system uses a 2-step cam technology with wide authority cam phasing, allowing adjustments to be made to the negative valve overlap (NVO) duration but not the valve opening durations. On the single cylinder HVA engine, the valve opening duration and lift are variable in addition to the NVO duration. The content of this paper is limited to the low-medium operating load region at 2000rpm. Using different injection strategies, including the NVO pilot injection approach, the single-cylinder engine is operated over a load range from 160-390 kPa net IMEP at 2000 rpm. Changes to valve opening duration on the single-cylinder HVA engine illustrate opportunities for load expansion and efficiency improvement at certain conditions. For instance, the low load limit can be extended on the HVA engine by reducing breathing and operating closer to a stoichiometric air fuel ratio (AFR) by using valve deactivation. The naturally aspirated engine used here without external EGR confirmed that as operating load increases the emissions of NOx increases due to combustion temperature. NOx emissions are found to be one limitation to the maximum load limitation, the other being high pressure rise rate. It is found that the configuration of the production intent cam-based system represents a good compromise between valve lift and duration in the low to medium load region. Changing the extent of charge motion and breathing via valve deactivation prove beneficial at moderating the pressure rise rate and combustion stability and extending the low load limit at 2000rpm on the HVA engine. It also confirms that strategies using a pilot fuel injection are beneficial at low operating loads but that as operating load is increased, the benefits of multiple injection diminish to the point where a single injection offers the best performance.
Book Synopsis Characteristics and Control of Low Temperature Combustion Engines by : Rakesh Kumar Maurya
Download or read book Characteristics and Control of Low Temperature Combustion Engines written by Rakesh Kumar Maurya and published by Springer. This book was released on 2017-11-03 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with novel advanced engine combustion technologies having potential of high fuel conversion efficiency along with ultralow NOx and particulate matter (PM) emissions. It offers insight into advanced combustion modes for efficient utilization of gasoline like fuels. Fundamentals of various advanced low temperature combustion (LTC) systems such as HCCI, PCCI, PPC and RCCI engines and their fuel quality requirements are also discussed. Detailed performance, combustion and emissions characteristics of futuristic engine technologies such as PPC and RCCI employing conventional as well as alternative fuels are analyzed and discussed. Special emphasis is placed on soot particle number emission characterization, high load limiting constraints, and fuel effects on combustion characteristics in LTC engines. For closed loop combustion control of LTC engines, sensors, actuators and control strategies are also discussed. The book should prove useful to a broad audience, including graduate students, researchers, and professionals Offers novel technologies for improved and efficient utilization of gasoline like fuels; Deals with most advanced and futuristic engine combustion modes such as PPC and RCCI; Comprehensible presentation of the performance, combustion and emissions characteristics of low temperature combustion (LTC) engines; Deals with closed loop combustion control of advanced LTC engines; State-of-the-art technology book that concisely summarizes the recent advancements in LTC technology. .
Book Synopsis Combustion Diagnostics in Homogeneous Charge Compression Ignition Optical and Thermal Single Cylinder Engines by : Pawel Luszcz
Download or read book Combustion Diagnostics in Homogeneous Charge Compression Ignition Optical and Thermal Single Cylinder Engines written by Pawel Luszcz and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The work presented in this thesis is intended to investigate the effects of fuel properties, injection strategy and timing on autoignition and combustion characteristics of a Homogeneous Charge Compression Ignition (HCCI) engine with a negative valve overlap (NVO) strategy. Conventional (pressure-transducer based) measurements and passive optical research have contributed to understanding of the chemical-physical sites of HCCI autoignition and combustion. This experimental work was undertaken on matching thermal and optical single cylinder research engines in configurations derived from a production Jaguar V8 engine. A thermal engine study using a range of fuels including conventional gasoline and primary reference fuels has been performed to gain insight into autoignition and combustion characteristics of various chemically dissimilar blends or components. This was done at different operating conditions by varying the engine speed and the proportion of residuals trapped. These measurements have shown that the autoignition and combustion characteristic of an HCCI operated engine are highly dependent on fuel blend composition and are also affected by engine operating conditions. It was found that the autoignition process type which the mixture undergoes, whether it is one- or two-step, depends very strongly both on fuel blend composition and on engine operating conditions. More specifically the presence and also proportion of particular chemical compounds in a blend could significantly contribute to the alteration of the process type. Similar experiments using the chosen engine operating points were repeated on the optical engine using passive optical diagnostics such as imaging and spectroscopy. Thereby it was possible to gain insight into the chemistry of one-step and two- step ignition processes. The image analysis of the port fuel injected (PFI) HCCI operation have been carried out for stoichiometric and lean conditions. A crank-angle resolved high-speed imaging technique was employed a piston crown window for optical access to the combustion chamber. The spatial repeatability nature of autoignition occurrence and the directions of combustion progress were evaluated using especially developed image processing technique. The insight into the expansion rates of burned areas and of the spreading velocities of reacting structures fronts was also gained by introducing two new image processing techniques. Various direct injection strategies (single and split injection) and timings, including fuel injection prior to and during the negative valve overlap period were optically investigated. The comprehensive study included the application of three diagnostic instruments: the Complementary Metal-Oxide Semiconductor (CMOS) high-speed colour imager, the intensified Charge Couple Device (CCD) and the imaging spectrograph. Among the other observations the applied passive techniques, the imaging and the spectroscopy in conjunction with adequate image processing techniques have shown that the combustion behaviour and also the colour of the burning mixture are dependent on the fuel injection scheme. With the investigated split (double) injection, when some of fuel is injected prior to TDC NVO the combustion behaviour is significantly different than when it is injected during even at TDC (NVO). There is a strong indication that a form of incandescence occurs during the NVO, which probably comes from the glowing soot. This is further supported by a quantification of the emitted luminescence and spectroscopic measurements during this phase.
Book Synopsis Development and Application of Tracer-based Planar Laser-induced Fluorescence Imaging Diagnostics for HCCI Engines by : Jordan Andrew Snyder
Download or read book Development and Application of Tracer-based Planar Laser-induced Fluorescence Imaging Diagnostics for HCCI Engines written by Jordan Andrew Snyder and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI) is an emerging engine strategy that can provide both high efficiency and low emissions, particularly in terms of NOx and soot. An important challenge of HCCI is the inherent narrow load range, bounded by combustion instability and misfires at low-load, and high pressure rise- rate (PRR) at high-load. In response, researchers have devised a number of strategies to expand the limits of HCCI operation. Negative valve overlap (NVO) with pilot injection can extend the low-load gasoline HCCI operating limit by increasing sensible energy during main compression through hot residual gas retention. Chemical effects due to reformation of the pilot injection may further impact combustion. Similarly, the high-load limit can be extended by increasing naturally occurring thermal stratification (TS) of the in- cylinder charge. These non-uniformities result in sequential auto-ignition that can effectively lower the PRR and thus expand the high-load limit. While demonstrations of these strategies have been successful and multiple engine studies have been completed, further characterization of key processes such as residual gas mixing and TS development is needed. This motivates the development of quantitative imaging diagnostics to improve the understanding of these complicated processes. In this study, tracer-based planar laser-induced fluorescence (PLIF) diagnostics for temperature and composition have been refined and optimized for application in HCCI engines at both load extremes. Acetone and 3-pentanone (both ketones) have been selected as seeded PLIF tracers as they provide good overall sensitivity and performance. Single-line and two-line diagnostic variations have been investigated, with an emphasis on optimizing overall diagnostic performance through excitation wavelength selection. Based on a detailed uncertainty analysis excitation wavelengths of 277 nm and 308 nm were selected for subsequent studies. Resulting single-shot temperature precisions were typically on the order 4 K and 12 K for the single-line and two-line techniques respectively. The corresponding mole fraction precision for the two-line technique was typically 4-5%. These results are consistent with the uncertainty analysis and demonstrate the utility of the optimization. HCCI studies were performed in two optically accessible engines, each configured for a specific load extreme. Residual mixing for low-load HCCI operation with NVO was first studied using the two-line technique to provide the simultaneous temperature and composition distribution. These measurements indicated rapid mixing of retained residuals during gas exchange and early compression, reaching a steady-state value midway through compression. Temperature stratification gradually increased throughout the remainder of compression while compositional stratification effectively remained constant. Variation of operating parameters such as main and NVO injection timing exhibited minimal differences in thermal or compositional stratification during main compression. Measurement during NVO recompression and re-expansion were also acquired to assess the in-cylinder temperatures stratification prior to chemical reaction and gas exchange. Next the development of thermal stratification for high-load HCCI with conventional valve timing was investigated using the single-line technique. These studies indicated a progressive increase in TS during compression, reaching a maximum standard deviation of 10 K at top dead center. Comparison of results for motored and fired operation exhibited similar trends. This finding indicates that the mechanism producing the TS is the same for both cases, although some differences in magnitude can occur. A subsequent parametric study proved that these differences can be attributed to the impact of both incomplete fuel mixing and cylinder-wall temperature variation, depending on the type of engine operation (DI skipfiring or premixed continuous firing). All measurements demonstrate the feasibility of quantitative tracer-based PLIF diagnostics in harsh engine environments and provide useful information for future HCCI engine development.
