Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Intelligent Reflecting Surfaces In Wireless Communication Systems
Download Intelligent Reflecting Surfaces In Wireless Communication Systems full books in PDF, epub, and Kindle. Read online Intelligent Reflecting Surfaces In Wireless Communication Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Intelligent Reflecting Surfaces in Wireless Communication Systems by : Li, Yueheng
Download or read book Intelligent Reflecting Surfaces in Wireless Communication Systems written by Li, Yueheng and published by KIT Scientific Publishing. This book was released on 2024-02-23 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanied with the development of the wireless communication technologies, the high data traffic is more necessary for civil and industrial applications than ever The concept of an intelligent reflective surface (IRS) has attracted considerable attention recently as a low-cost solution. As the main contribution, the dissertation creates new state-of-the-art and formulates a solid milestone for the IRS research field.
Book Synopsis Intelligent Reflecting Surfaces in Wireless Communication Systems by : Yueheng Li
Download or read book Intelligent Reflecting Surfaces in Wireless Communication Systems written by Yueheng Li and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Intelligent Reflecting Surface For B5G/6G Wireless Networks by : Qingqing Wu
Download or read book Intelligent Reflecting Surface For B5G/6G Wireless Networks written by Qingqing Wu and published by Springer Nature. This book was released on 2023-12-23 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive insights into the theory, models, and unique characteristics of intelligent reflecting surface (IRS) and its appealing applications in wireless information and power transmission for B5G/6G. It is organized as follows: Chapter 1 gives an overview of the fundamentals of IRS, including the signal and channel models of IRS, its hardware architecture, advantages and practical constraints. Chapter 2, 3 and 4 focus on how to optimize the joint design of active and passive beamforming for three types of IRS-aided wireless information/energy transmission systems, namely IRS-aided power transfer (WPT), IRS-aided simultaneous wireless information and power transfer (SWIPT) and IRS-aided wireless powered communication networks (WPCN). Chapter 2 specifically presents a general framework design for IRS-aided WPT systems from the perspectives of energy beamforming design and channel estimation, while the dynamic IRS beamforming design is also discussed. Chapter 3 thoroughly studies the IRS-aided SWIPT for achieving better R-E trade-off, wherein two different designs based on weighted sum-power maximization at energy users (EUs) and under individual quality-of-service (QoS), requirements at both information users (IUs) and EUs are investigated. Chapter 4 presents three paradigms of IRS-aided WPCN, i.e., IRS-aided half-duplex (HD) WPCN, IRS-aided full-duplex (FD) WCPN and IRS-aided multiple-input-multiple-output (MIMO) FD WPCN. The authors present some related emerging topics, e.g., active IRS aided wireless communications and IRS-aided unmanned aerial vehicle (UAV) communications in chapter 5. This book targets postgraduate students studying electrical engineering and computer science, and can be used as a secondary textbook. Professionals, researchers and engineers working in wireless networks will also find this book useful as a reference.
Book Synopsis Intelligent Surfaces Empowered 6G Wireless Network by : Qingqing Wu
Download or read book Intelligent Surfaces Empowered 6G Wireless Network written by Qingqing Wu and published by John Wiley & Sons. This book was released on 2023-12-27 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTELLIGENT SURFACES EMPOWERED 6G WIRELESS NETWORK Integrate intelligent surfaces into the wireless networks of the future. The next generation of wireless technology (6G) promises to transform wireless communication and human interconnectivity like never before. Intelligent surface, which adopts significant numbers of small reflective surfaces to reconfigure wireless connections and improve network performance, has recently been recognized as a critical component for enabling future 6G. The next phase of wireless technology demands engineers and researchers are familiar with this technology and are able to cope with the challenges. Intelligent Surfaces Empowered 6G Wireless Network provides a thorough overview of intelligent surface technologies and their applications in wireless networks and 6G. It includes an introduction to the fundamentals of intelligent surfaces, before moving to more advanced content for engineers who understand them and look to apply them in the 6G realm. Its detailed discussion of the challenges and opportunities posed by intelligent surfaces empowered wireless networks makes it the first work of its kind. Intelligent Surfaces Empowered 6G Wireless Network readers will also find: An editorial team including the original pioneers of intelligent surface technology. Detailed coverage of subjects including MIMO, terahertz, NOMA, energy harvesting, physical layer security, computing, sensing, machine learning, and more. Discussion of hardware design, signal processing techniques, and other critical aspects of IRS engineering. Intelligent Surfaces Empowered 6G Wireless Network is a must for students, researchers, and working engineers looking to understand this vital aspect of the coming 6G revolution.
Book Synopsis Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks by : Muhammad Ali Imran
Download or read book Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks written by Muhammad Ali Imran and published by John Wiley & Sons. This book was released on 2022-12-13 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative resource covering preliminary concepts and advanced concerns in the field of IRS and its role in 6G wireless systems Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks provides an in-depth treatment of the fundamental physics behind reconfigurable metasurfaces, also known as intelligent reflecting surfaces (IRS), and outlines the research roadmap towards their development as a low-complexity and energy-efficient solution aimed at turning the wireless environment into a software-defined entity. The text demonstrates IRS from different angles, including the underlying physics, hardware architecture, operating principles, and prototype designs. It enables readers to grasp the knowledge of the interplay of IRS and state-of-the-art technologies, examining the advantages, key principles, challenges, and potential use-cases. Practically, it equips readers with the fundamental knowledge of the operational principles of reconfigurable metasurfaces, resulting in its potential applications in various intelligent, autonomous future wireless communication technologies. To aid in reader comprehension, around 50 figures, tables, illustrations, and photographs to comprehensively present the material are also included. Edited by a team of highly qualified professionals in the field, sample topics covered in Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks are as follows: Evolution of antenna arrays design, introducing the fundamental principles of antenna theory and reviewing the stages of development of the field Beamforming design for IRS-assisted communications, discussing optimal IRS configuration in conjunction with overviewing novel beamforming designs Reconfigurable metasurfaces from physics to applications, discussing the working principles of tunable/reconfigurable metasurfaces and their capabilities and functionalities IRS hardware architectures, detailing the general hardware architecture of IRS and features related to the IRS’s main operational principle Wireless communication systems assisted by IRS, discussing channel characterization, system integration, and aspects related to the performance analysis and network optimization of state-of-the-art wireless applications. For students and engineers in wireless communications, microwave engineering, and radio hardware and design, Intelligent Reconfigurable Surfaces (IRS) for Prospective 6G Wireless Networks serves as an invaluable resource on the subject and is a useful course accompaniment for general Antenna Theory, Microwave Engineering, Electromagnetics courses.
Book Synopsis Intelligent Reflecting Surface-Aided Physical-Layer Security by : Feng Shu
Download or read book Intelligent Reflecting Surface-Aided Physical-Layer Security written by Feng Shu and published by Springer Nature. This book was released on 2023-11-12 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the problems of Physical Layer Security (PLS) in Intelligent Reflecting Surface (IRS)-assisted wireless networks. It also discusses the corresponding methods to solve these problems in a comprehensive style. Furthermore, some potential challenges are well analyzed. This book is divided into 11 chapters. Chapter 1 introduces the propagation characteristics of IRS-aided PLS communications. From Chapter 2 to Chapter 10, The authors mainly provide deep investigations of different PLS problems of IRS-aided wireless networks, namely, directional modulation (DM) networks. Chapter 11 draws a conclusion and includes the future research directions. Researchers working in wireless communications, or advanced-level computer science or electrical engineering students, can learn about secure communication in the physical layer through our book. Professionals or engineers working in this field will also benefit from this book.
Book Synopsis Wireless Information and Power Transfer by : Derrick Wing Kwan Ng
Download or read book Wireless Information and Power Transfer written by Derrick Wing Kwan Ng and published by John Wiley & Sons. This book was released on 2019-01-29 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: em style="mso-bidi-font-style: normal;"Wireless Information and Power Transfer offers an authoritative and comprehensive guide to the theory, models, techniques, implementation and application of wireless information and power transfer (WIPT) in energy-constrained wireless communication networks. With contributions from an international panel of experts, this important resource covers the various aspects of WIPT systems such as, system modeling, physical layer techniques, resource allocation and performance analysis. The contributors also explore targeted research problems typically encountered when designing WIPT systems.
Book Synopsis Physical Layer Security by : Khoa N. Le
Download or read book Physical Layer Security written by Khoa N. Le and published by Springer Nature. This book was released on 2021-01-24 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies the vulnerability of wireless communications under line-of-sight (LoS) and non-LoS correlated fading environments. The authors theoretically and practically provide physical layer security analyses for several technologies and networks such as Fifth-Generation (5G) networks, Internet of Things (IoT) applications, and Non-orthogonal multiple access (NOMA). The authors have provided these under various practical scenarios, and developed theoretical aspects to validate their proposed applications. Presents physical layer security (PLS) under correlated fading environments, 5G wireless networks, and NOMA networks; Provides end-to-end analyses, combination of channel correlation and outdated CSI and their effects on PL; Includes contributions of PLS research written by global experts in academia and industry.
Book Synopsis Reconfigurable Intelligent Surface-Empowered 6G by : Hongliang Zhang
Download or read book Reconfigurable Intelligent Surface-Empowered 6G written by Hongliang Zhang and published by Springer Nature. This book was released on 2021-05-29 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents novel RIS-Based Smart Radio techniques, targeting at achieving high-quality channel links in cellular communications via design and optimization of the RIS construction. Unlike traditional antenna arrays, three unique characteristics of the RIS will be revealed in this book. First, the built-in programmable configuration of the RIS enables analog beamforming inherently without extra hardware or signal processing. Second, the incident signals can be controlled to partly reflect and partly transmit through the RIS simultaneously, adding more flexibility to signal transmission. Third, the RIS has no digital processing capability to actively send signals nor any radio frequency (RF) components. As such, it is necessary to develop novel channel estimation and communication protocols, design joint digital and RIS-based analog beamforming schemes and perform interference control via mixed reflection and transmission. This book also investigates how to integrate the RIS to legacy communication systems. RIS techniques are further investigated in this book (benefited from its ability to actively shape the propagation environment) to achieve two types of wireless applications, i.e., RF sensing and localization. The influence of the sensing objectives on the wireless signal propagation can be potentially recognized by the receivers, which are then utilized to identify the objectives in RF sensing. Unlike traditional sensing techniques, RIS-aided sensing can actively customize the wireless channels and generate a favorable massive number of independent paths interacting with the sensing objectives. It is desirable to design RIS-based sensing algorithms, and optimize RIS configurations. For the second application, i.e., RIS aided localization, an RIS is deployed between the access point (AP) and users. The AP can then analyze reflected signals from users via different RIS configurations to obtain accurate locations of users. However, this is a challenging task due to the dynamic user topology, as well as the mutual influence between multiple users and the RIS. Therefore, the operations of the RIS, the AP, and multiple users need to be carefully coordinated. A new RIS-based localization protocol for device cooperation and an RIS configuration optimization algorithm are also required. This book targets researchers and graduate-level students focusing on communications and networks. Signal processing engineers, computer and information scientists, applied mathematicians and statisticians, who work in RIS research and development will also find this book useful.
Book Synopsis Reconfigurable Intelligent Surface-assisted Multi-user Wireless Communications Systems by : Haseeb Ur Rehman
Download or read book Reconfigurable Intelligent Surface-assisted Multi-user Wireless Communications Systems written by Haseeb Ur Rehman and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent reflective surfaces (IRSs) have recently emerged as a promising technology for 6G wireless communications as it can improve both the spectral and energy efficiencies of wireless systems at a low cost. In this thesis, we first tackle the problem of joint active and passive beamforming optimization for an intelligent reflective surface (IRS)-assisted multi-user downlink multiple-input multiple-output (MIMO) communication system under both ideal and practical IRS phase shifts. We aim to maximize the spectral efficiency of the users by minimizing the sum mean square error (MSE) of the users' received symbols. For this, a joint non-convex optimization problem is formulated under the sum minimum mean square error (MMSE) criterion. An alternating optimization and vector approximate message passing (VAMP)-based approach is presented to solve the joint problem under both ideal and practical constraints on the IRS phase shifts. Then, we introduce a novel approach of utilizing the IRS, now called modulating intelligent surface (MIS), for joint data modulation and signal beamforming in a multi-user downlink cellular network by leveraging the idea of backscatter communication. We present a general framework in which the MIS is used $i)$ to beamform the signals for a set of users whose data is modulated by the BS, and at the same time $ii)$ to embed the data of a different set of users by passively modulating the deliberately sent signals from the BS. By following the same VAMP-based optimization approach developed earlier, we optimize $i)$ the MIS phase-shifts for passive beamforming and data embedding for the BS- and MIS-served users, respectively, $ii)$ the active precoder and the receive scaling factors for the BS- and MIS-served users, respectively. Simulation results are presented to illustrate the performance of both the proposed IRS-based and MIS-based schemes under both perfect and imperfect channel state information (CSI). The results validate the superiority of the proposed method over the state-of-the-art techniques both in terms of throughput and computational complexity. The results also reveal that the proposed MIS-based approach outperforms the existing IRS-based schemes in terms of throughput while supporting a much higher number of users.
Book Synopsis Fundamentals of Wireless Communication by : David Tse
Download or read book Fundamentals of Wireless Communication written by David Tse and published by Cambridge University Press. This book was released on 2005-05-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.
Book Synopsis 2021 IEEE 32nd Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) by : IEEE Staff
Download or read book 2021 IEEE 32nd Annual International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) written by IEEE Staff and published by . This book was released on 2021-09-13 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Annual IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) is one of the premier conferences in the wireless research arena and has a long history of bringing together academia, industry and regulatory bodies Today, it has become one of the IEEE Communication Society s major conferences in wireless communications and networks The topics cover the physical layer (PHY) and fundamentals of wireless communications, medium access control (MAC) and cross layer design, mobile and wireless networks, as well as services, applications, and business
Book Synopsis Cell-free and Intelligent Reflective Surfaces Aided Architectures for Wireless Communications by : Diluka A. Loku Galappaththige
Download or read book Cell-free and Intelligent Reflective Surfaces Aided Architectures for Wireless Communications written by Diluka A. Loku Galappaththige and published by . This book was released on 2021 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel wireless communication technologies are being explored to satisfy the needs of the next generation wireless standards including the ever-increasing demands for higher data speeds, extended coverage, increased reliability, and massive connectivity. Recently, novel cell-free/distributed massive multiple-input multiple-output (MIMO) and intelligent reflective surface (IRS)-assisted wireless architectures have received significant research attention as new physical-layer transmission technologies, which are capable of achieving unprecedented spectral and energy efficiency improvements. To this end, both cell-free massive MIMO and IRS-aided systems have been identified as key candidate technologies for the sixth-generation (and beyond) wireless standard. Thus, this dissertation focuses on designing novel physical-layer transmission technologies for cell-free and IRS-enabled massive MIMO networks by taking into account realistic wireless communication impairments. This dissertation also proposes novel techniques to determine the feasibility of the proposed systems/technologies in fulfilling the requirements of future wireless networks such as enhanced spectrum and energy efficiency, improved reliability, and massive connectivity, through performance analysis. Specifically, new system and channel models, channel estimation techniques, pilot sharing strategies, spectrum utilization techniques, energy harvesting and transmit power allocation schemes, techniques for enabling smart propagation environment, and comprehensive performance analysis frameworks are developed for cell-free/distributed massive MIMO and IRS-assisted communication architectures. Our first work focuses on developing a comprehensive analytical framework for exploiting the feasibility of enabling simultaneous wireless information and power transfer (SWIPT) in cell-free massive MIMO systems. Specifically, tight approximations to the downlink harvested energy and downlink/uplink achievable rates are derived using a non-linear energy harvesting model for two functional channel state information scenarios. Thereby, max-min fairness-based transmit power control policies are proposed to boost the performance of SWIPT-enabled cell-free massive MIMO by mitigating the deleterious near-far effects in distributed transmission/reception. In our second work, the viability of the coexistence of underlay spectrum sharing in cell-free massive MIMO systems is investigated. To this end, a secondary system is underlaid within the same primary spectrum by exploiting underlay spectrum sharing techniques. A generalized pilot sharing scheme is first formulated, and thereby, the achievable rates are derived for both systems by adopting secondary transmit power constraints for the secondary system. Then, the proposed orthogonal multiple access analytical framework is extended to facilitate non-orthogonal multiple access(NOMA) scenario. The third research contribution investigates the fundamental performance of a distributed IRSs-aided communication system by enabling a smart propagation environment. To be more specific, the statistical characterization of the optimal end-to-end signal-to-noise ratio is derived by controlling the phase-shifts of the incident electromagnetic waves at the IRSs. Thereby, the fundamental performance matrices pertaining to the distributed IRSs-assisted set-up are evaluated for Nakagami-m fading channels. In the fourth work, a multi-hop IRS-assisted communication system is proposed for investigating the feasibility of adopting multi-IRSs in future wireless standards. Finally, the feasibility of adopting an IRS within cell-free wireless communication is investigated. To this end, the fundamental performance matrices including the achievable rate and outage probability are derived over Rayleigh fading channel model. The key design criteria of the above transmission strategies/designs is to efficiently combine the spatial diversity, spatial multiplexing gains, favorable propagation conditions of cell-free massive MIMO with the attributes of NOMA, underlay spectrum-sharing, energy harvesting, and efficient signal processing. Moreover, IRS-assisted transmission schemes are exploited to boost the performance by enabling smart propagation environments. Hence, the fundamental relationships between data rate, coverage, and reliability of the aforementioned transmission strategies are quantified by taking into account the detrimental effects of practical wireless transmission impairments.
Book Synopsis Performance Evaluation for Future Wireless Communication Systems by : Mohammad Al-Jarrah
Download or read book Performance Evaluation for Future Wireless Communication Systems written by Mohammad Al-Jarrah and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :Giovanni Interdonato Publisher :Linköping University Electronic Press ISBN 13 :9179298087 Total Pages :75 pages Book Rating :4.1/5 (792 download)
Book Synopsis Cell-Free Massive MIMO by : Giovanni Interdonato
Download or read book Cell-Free Massive MIMO written by Giovanni Interdonato and published by Linköping University Electronic Press. This book was released on 2020-09-09 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth generation of mobile communication systems (5G) is nowadays a reality. 5G networks are been deployed all over the world, and the first 5G-capable devices (e.g., smartphones, tablets, wearable, etc.) are already commercially available. 5G systems provide unprecedented levels of connectivity and quality of service (QoS) to cope with the incessant growth in the number of connected devices and the huge increase in data-rate demand. Massive MIMO (multiple-input multiple-output) technology plays a key role in 5G systems. The underlying principle of this technology is the use of a large number of co-located antennas at the base station, which coherently transmit/receive signals to/from multiple users. This signal co-processing at multiple antennas leads to manifold benefits: array gain, spatial diversity and spatial user multiplexing. These elements enable to meet the QoS requirements established for the 5G systems. The major bottleneck of massive MIMO systems as well as of any cellular network is the inter-cell interference, which affects significantly the cell-edge users, whose performance is already degraded by the path attenuation. To overcome these limitations and provide uniformly excellent service to all the users we need a more radical approach: we need to challenge the cellular paradigm. In this regard, cell-free massive MIMO constitutes the paradigm shift. In the cell-free paradigm, it is not the base station surrounded by the users, but rather it is each user being surrounded by smaller, simpler, serving base stations referred to as access points (APs). In such a system, each user experiences being in the cell-center, and it does not experience any cell boundaries. Hence, the terminology cell-free. As a result, users are not affected by inter-cell interference, and the path attenuation is significantly reduced due to the presence of many APs in their proximity. This leads to impressive performance. Although appealing from the performance viewpoint, the designing and implementation of such a distributed massive MIMO system is a challenging task, and it is the object of this thesis. More specifically, in this thesis we study: Paper A) The large potential of this promising technology in realistic indoor/outdoor scenarios while also addressing practical deployment issues, such as clock synchronization among APs, and cost-efficient implementations. We provide an extensive description of a cell-free massive MIMO system, emphasizing strengths and weaknesses, and pointing out differences and similarities with existing distributed multiple antenna systems, such as Coordinated MultiPoint (CoMP). Paper B) How to preserve the scalability of the system, by proposing a solution related to data processing, network topology and power control. We consider a realistic scenario where multiple central processing units serve disjoint subsets of APs, and compare the spectral efficiency provided by the proposed scalable framework with the canonical cell-free massive MIMO and CoMP. Paper C) How to improve the spectral efficiency (SE) in the downlink (DL), by devising two distributed precoding schemes, referred to as local partial zero-forcing (ZF) and local protective partial ZF, that provide an adaptable trade-off between interference cancelation and boosting of the desired signal, with no additional front-haul overhead, and that are implementable by APs with very few antennas. We derive closed-form expressions for the achievable SE under the assumption of independent Rayleigh fading channel, channel estimation error and pilot contamination. These closed-form expressions are then used to devise optimal max-min fairness power control. Paper D) How to further improve the SE by letting the user estimate the DL channel from DL pilots, instead of relying solely on the knowledge of the channel statistics. We derive an approximate closed-form expression of the DL SE for conjugate beamforming (CB), and assuming independent Rayleigh fading. This expression accounts for beamformed DL pilots, estimation errors and pilot contamination at both the AP and the user side. We devise a sequential convex approximation algorithm to globally solve the max-min fairness power control optimization problem, and a greedy algorithm for uplink (UL) and DL pilot assignment. The latter consists in jointly selecting the UL and DL pilot pair, for each user, that maximizes the smallest SE in the network. Paper E) A precoding scheme that is more suitable when only the channel statistics are available at the users, referred to as enhanced normalized CB. It consists in normalizing the precoding vector by its squared norm in order to reduce the fluctuations of the effective channel seen at the user, and thereby to boost the channel hardening. The performance achieved by this scheme is compared with the CB scheme with DL training (described in Paper D). Paper F) A maximum-likelihood-based method to estimate the channel statistics in the UL, along with an accompanying pilot transmission scheme, that is particularly useful in line-of-sight operation and in scenarios with resource constraints. Pilots are structurally phase-rotated over different coherence blocks to create an effective statistical distribution of the received pilot signal that can be efficiently exploited by the AP when performing the proposed estimation method. The overall conclusion is that cell-free massive MIMO is not a utopia, and a practical, distributed, scalable, high-performance system can be implemented. Today it represents a hot research topic, but tomorrow it might represent a key enabler for beyond-5G technology, as massive MIMO has been for 5G. La quinta generazione dei sistemi radiomobili cellulari (5G) è oggi una realtà. Le reti 5G si stanno diffondendo in tutto il mondo e i dispositivi 5G (ad esempio smartphones, tablets, indossabili, ecc.) sono già disponibili sul mercato. I sistemi 5G garantiscono livelli di connettività e di qualità di servizio senza precedenti, per fronteggiare l’incessante crescita del numero di dispositivi connessi alla rete e della domanda di dati ad alta velocità. La tecnologia Massive MIMO (multiple-input multiple-output) riveste un ruolo fondamentale nei sistemi 5G. Il principio alla base di questa tecnologia è l’impiego di un elevato numero di antenne collocate nella base station (stazione radio base) le quali trasmettono/ricevono segnali, in maniere coerente, a/da più terminali utente. Questo co-processamento del segnale da parte di più antenne apporta molteplici benefici: guadagno di array, diversità spaziale e multiplazione degli utenti nel dominio spaziale. Questi elementi consentono di raggiungere i requisiti di servizio stabiliti per i sistemi 5G. Tuttavia, il limite principale dei sistemi massive MIMO, così come di ogni rete cellulare, è rappresentato dalla interferenza inter-cella (ovvero l’interferenza tra aree di copertura gestite da diverse base stations), la quale riduce in modo significativo le performance degli utenti a bordo cella, già degradate dalle attenuazioni del segnale dovute alla considerevole distanza dalla base station. Per superare queste limitazioni e fornire una qualità del servizio uniformemente eccellente a tutti gli utenti, è necessario un approccio più radicale e guardare oltre il classico paradigma cellulare che caratterizza le attuali architetture di rete. A tal proposito, cell-free massive MIMO (massive MIMO senza celle) costituisce un cambio di paradigma: ogni utente è circondato e servito contemporaneamente da numerose, semplici e di dimensioni ridotte base stations, denominate access points (punti di accesso alla rete). Gli access points cooperano per servire tutti gli utenti nella loro area di copertura congiunta, eliminando l’interferenza inter-cella e il concetto stesso di cella. Non risentendo più dell’effetto “bordo-cella”, gli utenti possono usufruire di qualità di servizio e velocità dati eccellenti. Sebbene attraente dal punto di vista delle performance, l’implementazione di un tale sistema distribuito è una operazione impegnativa ed è oggetto di questa tesi. Piu specificatamente, questa tesi di dottorato tratta: Articolo A) L’enorme potenziale di questa promettente tecnologia in scenari realistici sia indoor che outdoor, proponendo anche delle soluzioni di implementazione flessibili ed a basso costo. Articolo B) Come preservare la scalabilità del sistema, proponendo soluzioni distribuite riguardanti il processamento e la condivisione dei dati, l’architettura di rete e l’allocazione di potenza, ovvero come ottimizzare i livelli di potenza trasmessa dagli access points per ridurre l’interferenza tra utenti e migliorare le performance. Articolo C) Come migliorare l’efficienza spettrale in downlink (da access point verso utente) proponendo due schemi di pre-codifica dei dati di trasmissione, denominati local partial zero-forcing (ZF) e local protective partial ZF, che forniscono un perfetto compromesso tra cancellazione dell’interferenza tra utenti ed amplificazione del segnale desiderato. Articolo D) Come migliorare l’efficienza spettrale in downlink permettendo al terminale utente di stimare le informazioni sulle condizioni istantanee del canale da sequenze pilota, piuttosto che basarsi su informazioni statistiche ed a lungo termine, come convenzionalmente previsto. Articolo E) In alternativa alla soluzione precedente, uno schema di pre-codifica che è più adatto al caso in cui gli utenti hanno a disposizione esclusivamente informazioni statistiche sul canale per poter effettuare la decodifica dei dati. Articolo F) Un metodo per permettere agli access points di stimare, in maniera rapida, le condizioni di canale su base statistica, favorito da uno schema di trasmissione delle sequenze pilota basato su rotazione di fase. Realizzare un sistema cell-free massive MIMO pratico, distribuito, scalabile e performante non è una utopia. Oggi questo concept rappresenta un argomento di ricerca interessante, attraente e stimolante ma in futuro potrebbe costituire un fattore chiave per le tecnologie post-5G, proprio come massive MIMO lo è stato per il 5G. Den femte generationens mobilkommunikationssystem (5G) är numera en verklighet. 5G-nätverk är utplacerade på ett flertal platser världen över och de första 5G-kapabla terminalerna (såsom smarta telefoner, surfplattor, kroppsburna apparater, etc.) är redan kommersiellt tillgängliga. 5G-systemen kan tillhandahålla tidigare oöverträffade nivåer av uppkoppling och servicekvalitet och är designade för en fortsatt oavbruten tillväxt i antalet uppkopplade apparater och ökande datataktskrav. Massiv MIMO-teknologi (eng: multiple-input multiple-output) spelar en nyckelroll i dagens 5G-system. Principen bakom denna teknik är användningen av ett stort antal samlokaliserade antenner vid basstationen, där alla antennerna sänder och tar emot signaler faskoherent till och från flera användare. Gemensam signalbehandling av många antennsignaler ger ett flertal fördelar, såsom hög riktverkan via lobformning, vilket leder till högre datatakter samt möjliggör att flera användare utnyttjar samma radioresurser via rumslig användarmultiplexering. Eftersom en signal kan gå genom flera olika, möjligen oberoende kanaler, så utsätts den för flera olika förändringar samtidigt. Denna mångfald ökar kvaliteten på signalen vid mottagaren och förbättrar radiolänkens robusthet och tillförlitlighet. Detta gör det möjligt att uppfylla de höga kraven på servicekvalitet som fastställts för 5G-systemen. Den största begränsningen för massiva MIMO-system såväl som för alla cellulära mobilnätverk, är störningar från andra celler som påverkar användare på cellkanten väsentligt, vars prestanda redan begränsas av sträckdämpningen på radiokanalen. För att övervinna dessa begränsningar och för att kunna tillhandahålla samma utmärkta servicekvalitet till alla användare behöver vi ett mer radikalt angreppssätt: vi måste utmana cellparadigmet. I detta avseende utgör cellfri massiv-MIMO teknik ett paradigmskifte. I cellfri massive-MIMO är utgångspunkten inte att basstationen är omgiven av användare som den betjänar, utan snarare att varje användare omges av basstationer som de betjänas av. Dessa basstationer, ofta mindre och enklare, kallas accesspunkter (AP). I ett sådant system upplever varje användare att den befinner sig i centrum av systemet och ingen användare upplever några cellgränser. Därav terminologin cellfri. Som ett resultat av detta påverkas inte användarna av inter-cellstörningar och sträckdämpningen reduceras kraftigt på grund av närvaron av många accesspunkter i varje användares närhet. Detta leder till imponerande prestanda. Även om det är tilltalande ur ett prestandaperspektiv så är utformningen och implementeringen av ett sådant distribuerat massivt MIMO-system en utmanande uppgift, och det är syftet med denna avhandling att studera detta. Mer specifikt studerar vi i denna avhandling: A) den mycket stora potentialen med denna teknik i realistiska inomhus- såväl som utomhusscenarier, samt hur man hanterar praktiska implementeringsproblem, såsom klocksynkronisering bland accesspunkter och kostnadseffektiva implementeringar; B) hur man ska uppnå skalbarhet i systemet genom att föreslå lösningar relaterade till databehandling, nätverkstopologi och effektkontroll; C) hur man ökar datahastigheten i nedlänken med hjälp av två nyutvecklade distribuerade överföringsmetoder som tillhandahåller en avvägning mellan störningsundertryckning och förstärkning av önskade signaler, utan att öka mängden intern signalering till de distribuerade accesspunkterna, och som kan implementeras i accesspunkter med mycket få antenner; D) hur man kan förbättra prestandan ytterligare genom att låta användaren estimera nedlänkskanalen med hjälp av nedlänkspiloter, istället för att bara förlita sig på kunskap om kanalstatistik; E) en överföringsmetod för nedlänk som är mer lämpligt när endast kanalstatistiken är tillgänglig för användarna. Prestandan som uppnås genom detta schema jämförs med en utökad variant av den nedlänk-pilotbaserade metoden (beskrivet i föregående punkt); F) en metod för att uppskatta kanalstatistiken i upplänken, samt en åtföljande pilotsändningsmetod, som är särskilt användbart vid direktvägsutbredning (line-of-sight) och i scenarier med resursbegränsningar. Den övergripande slutsatsen är att cellfri massiv MIMO inte är en utopi, och att ett distribuerat, skalbart, samt högpresterande system kan implementeras praktiskt. Idag representerar detta ett hett forskningsämne, men snart kan det visa sig vara en viktig möjliggörare för teknik bortom dagens system, på samma sätt som centraliserad massiv MIMO har varit för de nya 5G-systemen.
Book Synopsis Reinforcement Learning for Reconfigurable Intelligent Surfaces by : Alice Faisal
Download or read book Reinforcement Learning for Reconfigurable Intelligent Surfaces written by Alice Faisal and published by Springer Nature. This book was released on with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Antennas and Propagation for Wireless Communication Systems by : Simon R. Saunders
Download or read book Antennas and Propagation for Wireless Communication Systems written by Simon R. Saunders and published by John Wiley & Sons. This book was released on 2007-05-07 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antennas and propagation are of fundamental importance to the coverage, capacity and quality of all wireless communication systems. This book provides a solid grounding in antennas and propagation, covering terrestrial and satellite radio systems in both mobile and fixed contexts. Building on the highly successful first edition, this fully updated text features significant new material and brand new exercises and supplementary materials to support course tutors. A vital source of information for practising and aspiring wireless communication engineers as well as for students at postgraduate and senior undergraduate levels, this book provides a fundamental grounding in the principles of antennas and propagation without excessive recourse to mathematics. It also equips the reader with practical prediction techniques for the design and analysis of a very wide range of common wireless communication systems. Including: Overview of the fundamental electromagnetic principles underlying propagation and antennas. Basic concepts of antennas and their application to specific wireless systems. Propagation measurement, modelling and prediction for fixed links, macrocells, microcells, picocells and megacells Narrowband and wideband channel modelling and the effect of the channel on communication system performance. Methods that overcome and transform channel impairments to enhance performance using diversity, adaptive antennas and equalisers. Key second edition updates: New chapters on Antennas for Mobile Systems and Channel Measurements for Mobile Radio Systems. Coverage of new technologies, including MIMO antenna systems, Ultra Wideband (UWB) and the OFDM technology used in Wi-Fi and WiMax systems. Many new propagation models for macrocells, microcells and picocells. Fully revised and expanded end-of-chapter exercises. The Solutions Manual can be requested from www.wiley.com/go/saunders_antennas_2e