Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Hydrogen Production Enhancement Using A Stratified Catalyst Bed In Reforming Systems
Download Hydrogen Production Enhancement Using A Stratified Catalyst Bed In Reforming Systems full books in PDF, epub, and Kindle. Read online Hydrogen Production Enhancement Using A Stratified Catalyst Bed In Reforming Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Hydrogen Production Technologies by : Mehmet Sankir
Download or read book Hydrogen Production Technologies written by Mehmet Sankir and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive practical review of the new technologies used to obtain hydrogen more efficiently via catalytic, electrochemical, bio- and photohydrogen production. Hydrogen has been gaining more attention in both transportation and stationary power applications. Fuel cell-powered cars are on the roads and the automotive industry is demanding feasible and efficient technologies to produce hydrogen. The principles and methods described herein lead to reasonable mitigation of the great majority of problems associated with hydrogen production technologies. The chapters in this book are written by distinguished authors who have extensive experience in their fields, and readers will have a chance to compare the fundamental production techniques and learn about the pros and cons of these technologies. The book is organized into three parts. Part I shows the catalytic and electrochemical principles involved in hydrogen production technologies. Part II addresses hydrogen production from electrochemically active bacteria (EAB) by decomposing organic compound into hydrogen in microbial electrolysis cells (MECs). The final part of the book is concerned with photohydrogen generation. Recent developments in the area of semiconductor-based nanomaterials, specifically semiconductor oxides, nitrides and metal free semiconductor-based nanomaterials for photocatalytic hydrogen production are extensively discussed.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2616 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Handbook of Hydrogen Energy by : S.A. Sherif
Download or read book Handbook of Hydrogen Energy written by S.A. Sherif and published by CRC Press. This book was released on 2014-07-29 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: Can hydrogen and electricity supply all of the world’s energy needs? Handbook of Hydrogen Energy thoroughly explores the notion of a hydrogen economy and addresses this question. The handbook considers hydrogen and electricity as a permanent energy system and provides factual information based on science. The text focuses on a large cross section of applications such as fuel cells and catalytic combustion of hydrogen. The book also includes information on inversion curves, physical and thermodynamic tables, and properties of storage materials, data on specific heats, and compressibility and temperature–entropy charts and more. Analyzes the principles of hydrogen energy production, storage, and utilization Examines electrolysis, thermolysis, photolysis, thermochemical cycles, and production from biomass and other hydrogen production methods Covers all modes of hydrogen storage: gaseous, liquid, slush, and metal hydride storage Handbook of Hydrogen Energy serves as a resource for graduate students, as well as a reference for energy and environmental engineers and scientists.
Book Synopsis Fuel Cells: Technologies for Fuel Processing by : Dushyant Shekhawat
Download or read book Fuel Cells: Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations
Book Synopsis Hydrogen Storage Materials by : R. G. Barnes
Download or read book Hydrogen Storage Materials written by R. G. Barnes and published by . This book was released on 1988 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ames Laboratory, Iowa, USA
Book Synopsis Hydrogen Storage Technologies by : Agata Godula-Jopek
Download or read book Hydrogen Storage Technologies written by Agata Godula-Jopek and published by John Wiley & Sons. This book was released on 2012-07-05 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of current and possible future hydrogen storage technologies, written from an industrial perspective. The book describes the fundamentals, taking into consideration environmental, economic and safety aspects, as well as presenting infrastructure requirements, with a special focus on hydrogen applications in production, transportation, military, stationary and mobile storage. A comparison of the different storage technologies is also included, ranging from storage of pure hydrogen in different states, via chemical storage right up to new materials already under development. Throughout, emphasis is placed on those technologies with the potential for commercialization.
Download or read book Chemical Engineering Progress written by and published by . This book was released on 2006 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Handbook of Biomass Downdraft Gasifier Engine Systems by : Thomas B. Reed
Download or read book Handbook of Biomass Downdraft Gasifier Engine Systems written by Thomas B. Reed and published by Biomass Energy Foundation. This book was released on 1988 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1981 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biofuels written by Ayhan Demirbas and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofuel is a renewable energy source produced from natural materials. The benefits of biofuels over traditional petroleum fuels include greater energy security, reduced environmental impact, foreign exchange savings, and socioeconomic issues related to the rural sector. The most common biofuels are produced from classic food crops that require high-quality agricultural land for growth. However, bioethanol can be produced from plentiful, domestic, cellulosic biomass resources such as herbaceous and woody plants, agricultural and forestry residues, and a large portion of municipal and industrial solid waste streams. There is also a growing interest in the use of vegetable oils for making biodiesel. “Biofuels: Securing the Planet’s Future Energy Needs” discusses the production of transportation fuels from biomass (such as wood, straw and even household waste) by Fischer-Tropsch synthesis. The book is an important text for students and researchers in energy engineering, as well as professional fuel engineers.
Book Synopsis Handbook of Clean Energy Systems, 6 Volume Set by : Jinyue Yan
Download or read book Handbook of Clean Energy Systems, 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.
Book Synopsis Process and Chemical Engineering by :
Download or read book Process and Chemical Engineering written by and published by . This book was released on 2000 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Extractive Metallurgy 3 by : Alain Vignes
Download or read book Extractive Metallurgy 3 written by Alain Vignes and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive metallurgy is the art and science of extracting metals from their ores and refining them. The production of metals and alloys from these source materials is still one of the most important and fundamental industries in both developed and developing economies around the world. The outputs and products are essential resources for the metallic, mechanical, electromagnetic, electrical and electronics industries (silicon is treated as a metal for these purposes). This series is devoted to the extraction of metals from ores, concentrates (enriched ores), scraps, and other sources and their refining to the state of either liquid metal before casting or to solid metals. The extraction and refining operations that are required may be carried out by various metallurgical reaction processes. Extractive Metallurgy 1 deals with the fundamentals of thermodynamics and kinetics of the reaction processes. Extractive Metallurgy 2 focuses on pyrometallurgical, hydrometallurgical, halide and electro-metallurgical (conversion) processes. Extractive Metallurgy 3 deals with the industrial processing operations, technologies, and process routes, in other words the sequence of steps or operations used to convert the ore to metal. Processes and operations are studied using the methodology of “chemical reaction engineering”. As the fundamentals of the art and science of Extractive Metallurgy are infrequently taught as dedicated university or engineering schools courses, this series is intended both for students in the fields of Metallurgy and Mechanical Engineering who want to acquire this knowledge, and also for engineers put in charge of the operation of an industrial production unit or the development of a new process, who will need the basic knowledge of the corresponding technology.
Book Synopsis Biomass Gasification and Pyrolysis by : Prabir Basu
Download or read book Biomass Gasification and Pyrolysis written by Prabir Basu and published by Academic Press. This book was released on 2010-07-19 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown. Includes step-by-step design procedures and case studies for Biomass GasificationProvides worked process flow diagrams for gasifier design. Covers integration with other technologies (e.g. gas turbine, engine, fuel cells)
Book Synopsis Renewable Energy Production and Distribution by : Mejdi Jeguirim
Download or read book Renewable Energy Production and Distribution written by Mejdi Jeguirim and published by Academic Press. This book was released on 2022-06-16 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Energy Production and Distribution: Recent Developments covers critical research and industry developments on renewable energy, including technological, production, conversion, storage and management. This updated volume provides recent developments in solar energy systems (thermal and photovoltaic), wind energy, hydropower, geothermal energy, bioenergy production and hydrogen production, with the addition of fuel cell technology for this new release. Technology advancements include resources assessment and deployment, materials performance improvement, system optimization and sizing, instrumentation and control, modeling and simulation, and regulations and policies. Each chapter examines advances in specific renewable energy systems, providing theoretical and applied aspects of system optimization, control and management. Global case studies demonstrate practical applications and economical and environmental aspects through lifecycle analysis. The book will be of interest to engineering graduates, researchers, professors and industry professionals involved in the renewable energy sector and advanced engineering courses dealing with renewable energy, sources, thermal and electrical energy production and sustainability. - Addresses the advantages and disadvantages of all renewable technologies - Includes global case studies that demonstrate the practical applications of renewable energy production and distribution - Features videos and slideshows in the online e-Book for application tutorials
Download or read book Fossil Energy Update written by and published by . This book was released on 1982 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Thermal and Catalytic Processes in Petroleum Refining by : Serge Raseev
Download or read book Thermal and Catalytic Processes in Petroleum Refining written by Serge Raseev and published by CRC Press. This book was released on 2003-02-26 with total page 1185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the thermal and catalytic processes involved in the refining of petroleum including visbreaking, coking, pyrolysis, catalytic cracking, oligomerization, alkylation, hydrofining, hydroisomerization, hydrocracking, and catalytic reforming. It analyzes the thermodynamics, reaction mechanisms, and kinetics of each process, as well as
