Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
First Principles Studies Of Oxide Surface Defects And Metal Oxide Interfaces
Download First Principles Studies Of Oxide Surface Defects And Metal Oxide Interfaces full books in PDF, epub, and Kindle. Read online First Principles Studies Of Oxide Surface Defects And Metal Oxide Interfaces ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Book Synopsis Defects at Oxide Surfaces by : Jacques Jupille
Download or read book Defects at Oxide Surfaces written by Jacques Jupille and published by Springer. This book was released on 2015-02-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics and characterization of defects at oxide surfaces. It provides a state-of-the-art review of the field, containing information to the various types of surface defects, describes analytical methods to study defects, their chemical activity and the catalytic reactivity of oxides. Numerical simulations of defective structures complete the picture developed. Defects on planar surfaces form the focus of much of the book, although the investigation of powder samples also form an important part. The experimental study of planar surfaces opens the possibility of applying the large armoury of techniques that have been developed over the last half-century to study surfaces in ultra-high vacuum. This enables the acquisition of atomic level data under well-controlled conditions, providing a stringent test of theoretical methods. The latter can then be more reliably applied to systems such as nanoparticles for which accurate methods of characterization of structure and electronic properties have yet to be developed. The book gives guidance to tailor oxide surfaces by controlling the nature and concentration of defects. The importance of defects in the physics and chemistry of metal oxide surfaces is presented in this book together with the prominent role of oxides in common life. The book contains contributions from leaders in the field. It serves as a reference for experts and beginners in the field.
Book Synopsis Springer Handbook of Surface Science by : Mario Rocca
Download or read book Springer Handbook of Surface Science written by Mario Rocca and published by Springer Nature. This book was released on 2021-01-14 with total page 1273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook delivers an up-to-date, comprehensive and authoritative coverage of the broad field of surface science, encompassing a range of important materials such metals, semiconductors, insulators, ultrathin films and supported nanoobjects. Over 100 experts from all branches of experiment and theory review in 39 chapters all major aspects of solid-state surfaces, from basic principles to applications, including the latest, ground-breaking research results. Beginning with the fundamental background of kinetics and thermodynamics at surfaces, the handbook leads the reader through the basics of crystallographic structures and electronic properties, to the advanced topics at the forefront of current research. These include but are not limited to novel applications in nanoelectronics, nanomechanical devices, plasmonics, carbon films, catalysis, and biology. The handbook is an ideal reference guide and instructional aid for a wide range of physicists, chemists, materials scientists and engineers active throughout academic and industrial research.
Book Synopsis High-k Gate Dielectrics for CMOS Technology by : Gang He
Download or read book High-k Gate Dielectrics for CMOS Technology written by Gang He and published by John Wiley & Sons. This book was released on 2012-08-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art overview of high-k dielectric materials for advanced field-effect transistors, from both a fundamental and a technological viewpoint, summarizing the latest research results and development solutions. As such, the book clearly discusses the advantages of these materials over conventional materials and also addresses the issues that accompany their integration into existing production technologies. Aimed at academia and industry alike, this monograph combines introductory parts for newcomers to the field as well as advanced sections with directly applicable solutions for experienced researchers and developers in materials science, physics and electrical engineering.
Book Synopsis Metal Oxide Nanoparticles, 2 Volume Set by : Oliver Diwald
Download or read book Metal Oxide Nanoparticles, 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Book Synopsis Dekker Encyclopedia of Nanoscience and Nanotechnology by : James A. Schwarz
Download or read book Dekker Encyclopedia of Nanoscience and Nanotechnology written by James A. Schwarz and published by CRC Press. This book was released on 2004 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis The Surface Science of Metal Oxides by :
Download or read book The Surface Science of Metal Oxides written by and published by Royal Society of Chemistry. This book was released on 2000 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface science of metal oxides is studied using a variety of experimental and theoretical techniques, allowing the geometry, electronic structure, dynamics and the behaviour of the metal oxide-metal interface to be explored. Faraday Discussions documents a long-established series of Faraday Discussion meetings which provide a unique international forum for the exchange of views and newly acquired results in developing areas of physical chemistry, biophysical chemistry and chemical physics. The papers presented are published in the Faraday Discussion volume together with a record of the discussion contributions made at the meeting. Faraday Discussions therefore provide an important record of current international knowledge and views in the field concerned.
Book Synopsis Scanning Probe Microscopy in Nanoscience and Nanotechnology 2 by : Bharat Bhushan
Download or read book Scanning Probe Microscopy in Nanoscience and Nanotechnology 2 written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-12-17 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the physical and technical foundation of the state of the art in applied scanning probe techniques. It constitutes a timely and comprehensive overview of SPM applications. The chapters in this volume relate to scanning probe microscopy techniques, characterization of various materials and structures and typical industrial applications, including topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. The chapters are written by leading researchers and application scientists from all over the world and from various industries to provide a broader perspective.
Author : Publisher :World Scientific ISBN 13 :1911299093 Total Pages :381 pages Book Rating :4.9/5 (112 download)
Download or read book written by and published by World Scientific. This book was released on with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Handbook of Nanophysics by : Klaus D. Sattler
Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of nanoscience was pioneered in the 1980s with the groundbreaking research on clusters, which later led to the discovery of fullerenes. Handbook of Nanophysics: Clusters and Fullerenes focuses on the fundamental physics of these nanoscale materials and structures. Each peer-reviewed chapter contains a broad-based introduction and enhances
Book Synopsis Spectroscopy of Complex Oxide Interfaces by : Claudia Cancellieri
Download or read book Spectroscopy of Complex Oxide Interfaces written by Claudia Cancellieri and published by Springer. This book was released on 2018-04-09 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the most recent and compelling experimental results for complex oxide interfaces. The results of this book were obtained with the cutting-edge photoemission technique at highest energy resolution. Due to their fascinating properties for new-generation electronic devices and the challenge of investigating buried regions, the book chiefly focuses on complex oxide interfaces. The crucial feature of exploring buried interfaces is the use of soft X-ray angle-resolved photoemission spectroscopy (ARPES) operating on the energy range of a few hundred eV to increase the photoelectron mean free path, enabling the photons to penetrate through the top layers – in contrast to conventional ultraviolet (UV)-ARPES techniques. The results presented here, achieved by different research groups around the world, are summarized in a clearly structured way and discussed in comparison with other photoemission spectroscopy techniques and other oxide materials. They are complemented and supported by the most recent theoretical calculations as well as results of complementary experimental techniques including electron transport and inelastic resonant X-ray scattering.
Book Synopsis The Role of Non-Stoichiometry in the Functional Properties of Oxide Materials by : Maria Veronica Ganduglia-Pirovano
Download or read book The Role of Non-Stoichiometry in the Functional Properties of Oxide Materials written by Maria Veronica Ganduglia-Pirovano and published by Frontiers Media SA. This book was released on 2019-12-09 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Metal Oxide Powder Technologies by : Yarub Al-Douri
Download or read book Metal Oxide Powder Technologies written by Yarub Al-Douri and published by Elsevier. This book was released on 2020-06-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Powder Technologies: Fundamentals, Processing Methods and Applications reviews the fundamentals, processing methods and applications of this key materials system. Topics addressed comprehensively cover chemical and physical properties, synthesis, preparation, both accepted and novel processing methods, modeling and simulation. The book provides fundamental information on the key properties that impact performance, such as particle size and crystal structure, along with methods to measure, analyze and evaluate. Finally, important applications are covered, including biomedical, energy, electronics and materials applications. - Provides a comprehensive overview of key topics both on the theoretical side and the experimental - Discusses important properties that impact metal oxide performance, processing methods (both novel and accepted), and important applications - Reviews the most relevant applications, such as biomedical, energy, electronics and materials applications
Book Synopsis Leading-edge Semiconductor Research by : Thomas B. Elliot
Download or read book Leading-edge Semiconductor Research written by Thomas B. Elliot and published by Nova Publishers. This book was released on 2005 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes within its scope studies of the structural, electrical, optical and acoustical properties of bulk, low-dimensional and amorphous semiconductors; computational semiconductor physics; interface properties, including the physics and chemistry of heterojunctions, metal-semiconductor and insulator-semiconductor junctions; all multi-layered structures involving semiconductor components. Dopant incorporation. Growth and preparation of materials, including both epitaxial (e.g. molecular beam and chemical vapour methods) and bulk techniques; in situ monitoring of epitaxial growth processes, also included are appropriate aspects of surface science such as the influence of growth kinetics and chemical processing on layer and device properties. The physics of semiconductor electronic and optoelectronic devices are examined , including theoretical modelling and experimental demonstration; all aspects of the technology of semiconductor device and circuit fabrication. Relevant areas of 'molecular electronics' and semiconductor structures incorporating Langmuir-Blodgett films; resists, lithography and metallisation where they are concerned with the definition of small geometry structure. The structural, electrical and optical characterisation of materials and device structures are also included. The scope encompasses materials and device reliability: reliability evaluation of technologies; failure analysis and advanced analysis techniques such as SEM, E-beam, optical emission microscopy, acoustic microscopy techniques; liquid crystal techniques; noise measurement, reliability prediction and simulation; reliability indicators; failure mechanisms, including charge migration, trapping, oxide breakdown, hot carrier effects, electro-migration, stress migration; package- related failure mechanisms; effects of operational and environmental stresses on reliability.
Download or read book ZnO Nanostructures written by Yue Zhang and published by Royal Society of Chemistry. This book was released on 2017-06-21 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wide band semiconductors with rich morphologies and interesting electric, optical, mechanical and piezoelectric properties, ZnO nanostructures have great potential in applications, such as strain sensors, UV detectors, blue LED, nano generators, and biosensors. ZnO Nanostructures: Fabrication and Applications covers the controllable synthesis and property optimization of ZnO nanostructures through to the preparation and performance of nanodevices for various applications. The book also includes recent progress in property modulation of ZnO nanomaterials and new types of devices as well as the latest research on self-powered devices and performance modulation of ZnO nanodevices by multi-field coupled effects. Authored by a leading researcher working within the field, this volume is applicable for those working in nanostructure fabrication and device application in industry and academia and is appropriate from advanced undergraduate level upwards.
Book Synopsis A Primer in Density Functional Theory by : Carlos Fiolhais
Download or read book A Primer in Density Functional Theory written by Carlos Fiolhais and published by Springer Science & Business Media. This book was released on 2003-06-11 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Density functional theory (DFT) is by now a well-established method for tackling the quantum mechanics of many-body systems. Originally applied to compute properties of atoms and simple molecules, DFT has quickly become a work horse for more complex applications in the chemical and materials sciences. The present set of lectures, spanning the whole range from basic principles to relativistic and time-dependent extensions of the theory, is the ideal introduction for graduate students or nonspecialist researchers wishing to familiarize themselves with both the basic and most advanced techniques in this field.
Book Synopsis Metal Oxide Defects by : Vijay Kumar
Download or read book Metal Oxide Defects written by Vijay Kumar and published by Elsevier. This book was released on 2022-11-19 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Defects: Fundamentals, Design, Development and Applications provides a broad perspective on the development of advanced experimental techniques to study defects and their chemical activity and catalytic reactivity in various metal oxides. This book highlights advances in characterization and analytical techniques to achieve better understanding of a wide range of defects, most importantly, state-of-the-art methodologies for controlling defects. The book provides readers with pathways to apply basic principles and interpret the behavior of metal oxides. After reviewing characterization and analytical techniques, the book focuses on the relationship of defects to the properties and performance of metal oxides. Finally, there is a review of the methods to control defects and the applications of defect engineering for the design of metal oxides for applications in optoelectronics, energy, sensing, and more. This book is a key reference for materials scientists and engineers, chemists, and physicists. - Reviews advances in characterization and analytical techniques to understand the behavior of defects in metal oxide materials - Introduces defect engineering applied to the design of metal oxide materials with desirable properties - Discusses applications of defect engineering to enhance the performance of materials for a wide range of applications, with an emphasis on optoelectronics
