Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Download Defect Passivation And Activation Of Thin Film Cdsete Cdte Solar Cells full books in PDF, epub, and Kindle. Read online Defect Passivation And Activation Of Thin Film Cdsete Cdte Solar Cells ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author : Rachael Greenhalgh
Publisher :
ISBN 13 :
Total Pages : 0 pages
Book Rating : 4.:/5 (14 download)
Download or read book Defect Passivation and Activation of Thin Film CdSeTe/CdTe Solar Cells written by Rachael Greenhalgh and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Poonam Rani Kharangarh
Publisher :
ISBN 13 :
Total Pages : 134 pages
Book Rating : 4.:/5 (93 download)
Download or read book Study of Deep Level Defects of N+-CdS/P-CdTe Solar Cells written by Poonam Rani Kharangarh and published by . This book was released on 2013 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among various photovoltaic materials, polycrystalline cadmium telluride thin film is now the most promising material, due to its low production cost excellent stability and reliability. Current-voltage and capacitance-voltage measurements of CdTe photovoltaic devices at different temperatures can provide valuable information about non-idealities in the n-p semiconductor junction. There are certain limitations which limit the efficiency of CdTe solar cells. There is no real distinction between defects and impurities in CdTe solar cells as both act as beneficial dopants or detrimental traps unlike Si where intentional shallow dopants and traps are distinctly different. Therefore, the role of defect states on CdTe solar cell performance, the effect of processing on defect states, and simple and effective characterization techniques must be investigated and identified. In this research the thin film n+-CdS/p-CdTe solar cells made with evaporated Cu as a primary back contact, are characterized by using the temperature dependence of the reverse bias diode current (J-V-T) to determine the energy levels of deep defects. The results of the J-V-T measurements on solar cells made at NJIT show that while modest amounts of Cu enhance cell performance, an excessive high temperature annealing step degrades device quality and reduces efficiency. This work addresses the error that can be introduced during defect energy level estimation if the temperature dependence of the carrier capture cross-section is neglected. Therefore, the location of traps is derived using a Shockley-Read-Hall recombination model with modified assumptions. A Cu-related deep level defect with activation energy of 0.57eV is observed for Cu evaporated back contact cells and an intrinsic defect with activation energy 0.89eV is found. Frequency dispersion in Capacitance-Voltage measurements confirms the presence of Cu-related deep level traps for cells with a Cu evaporated back contact, whereas no such defects are observed in carbon paste contact. The behavior is believed to be due to diffusion of excess Cu from the contact. It is further observed that majority carrier deep level traps (Cu-related or intrinsic) contribute differently to the degradation of electronic properties of the CdTe solar cells. A simple and effective characterization technique based on temperature dependent capacitance spectroscopy (TDCS) is used to identify majority carrier trapping defects in thin film n+-CdS/p-CdTe solar cell, made with evaporated Cu as a primary back contact. The distinct deep level traps, observed by TDCS seem to be due to the ionization of impurity centers located in the depletion region of n+-CdS/p-CdTe junction.
Author : Arvind Shah
Publisher : Springer Nature
ISBN 13 : 3030464873
Total Pages : 357 pages
Book Rating : 4.0/5 (34 download)
Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Author : Dohyoung Kwon
Publisher :
ISBN 13 :
Total Pages : 161 pages
Book Rating : 4.:/5 (858 download)
Download or read book Studies of Sputtered CdTe and CdSe Solar Cells written by Dohyoung Kwon and published by . This book was released on 2012 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: CdTe has recently become the most commercially successful polycrystalline thin film solar module material. Its low cost, large-area solar module is reshaping the silicondominated solar panel market; however, CdTe has much room to improve and thus more fundamental understanding is needed. Current thin film solar cell research is focused on two areas: One is identifying loss mechanisms and understanding the polycrystalline nature of single junction device to improve device performance. Another is searching for new materials and fabricating tandem solar cells. In this study, along with other people's work to improve the efficiency of CdTe solar module, I studied loss mechanism and growth mode of CdTe solar cells to have fundamental understanding of polycrystalline films. In addition to that, in an effort to make tandem solar cells, I fabricated and characterized CdSe solar cells, which is considered as an ideal candidate for the top cell with its band gap of 1.7 eV. This dissertation is designed to show similarities and differences between CdTe and CdSe solar cells, side by side. After the introduction (Chapter1), I will review the physical properties of CdTe and CdSe solar cells (Chapter 2). Two primary tools to study defects and surface morphology were photoluminescence (PL) and atomic force microscopy (AFM). PL showed information on the crystallinity and defects of CdTe and CdSe films before and after annealing.(Chapter 3). AFM measurements and their analysis using scaling theory revealed information on the growth modes of CdTe and CdSe films.(Chapter 4). With the goal of exploring suitability for tandem structures with ~1.7 eV top cell and ~1.1 eV bottom cell, I fabricated and characterized single-junction CdSe devices. (Chapter 5) In addition, for the bottom cell I fabricated HgCdTe cells with Eg~1.1 eV. Single junction HgCdTe and two-terminal CdTe/HgCdTe tandem solar cells were fabricated and characterized. (Chapter 5).
![Download Advanced Processing of CdTe- and CuIn[subscript 1-x]Ga[subscript x]Se2-Based Solar Cells: Final Technical Report, 26 May 1998-22 December 2001 PDF Online Free](https://books.google.com/books/content/images/frontcover/HZUQWv8PMD0C?fife=w200-h370)
Author : Don Louis Morel
Publisher : DIANE Publishing
ISBN 13 : 1428917292
Total Pages : 51 pages
Book Rating : 4.4/5 (289 download)
Download or read book Advanced Processing of CdTe- and CuIn[subscript 1-x]Ga[subscript x]Se2-Based Solar Cells: Final Technical Report, 26 May 1998-22 December 2001 written by Don Louis Morel and published by DIANE Publishing. This book was released on 2003 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Jef Poortmans
Publisher : John Wiley & Sons
ISBN 13 : 0470091266
Total Pages : 504 pages
Book Rating : 4.4/5 (7 download)
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Author : Alan Fahrenbruch
Publisher : Elsevier
ISBN 13 : 0323145388
Total Pages : 580 pages
Book Rating : 4.3/5 (231 download)
Download or read book Fundamentals Of Solar Cells written by Alan Fahrenbruch and published by Elsevier. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Solar Cells: Photovoltaic Solar Energy Conversion provides an introduction to the fundamental physical principles of solar cells. It aims to promote the expansion of solar photovoltaics from relatively small and specialized use to a large-scale contribution to energy supply. The book begins with a review of basic concepts such as the source of energy, the role of photovoltaic conversion, the development of photovoltaic cells, and sequence of phenomena involved in solar power generation. This is followed by separate chapters on each of the processes that take place in solar cell. These include solar input; properties of semiconductors; recombination and the flow of photogenerated carriers; charge separation and the characteristics of junction barriers; and calculation of solar efficiency. Subsequent chapters deal with the operation of specific solar cell devices such as a single-crystal homojunction (Si); a single-crystal-heterojunction/buried-homojunction (AlGaAs/GaAs); and a polycrystalline, thin-film cell (CuxS/CdS). This book is intended for upper-level graduate students who have a reasonably good understanding of solid state physics and for scientists and engineers involved in research and development of solar cells.
Author : Misle M. Tessema
Publisher :
ISBN 13 :
Total Pages : 220 pages
Book Rating : 4.:/5 (496 download)
Download or read book Shunt Passivation Process for CdTe Solar Cell written by Misle M. Tessema and published by . This book was released on 2009 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: A cadmium sulfide / cadmium telluride (CdS/CdTe) solar cell consists of the device stack: Glass substrate / SnO2:F (TCO, transparent conductive oxide) / CdS (n-type semiconductor) / CdTe (p-type semiconductor) / Cu/Au (metal/back contact). During the fabrication process of the CdS and CdTe thin films pinholes are usually formed within these layers (random defects, which are entropy driven). After the semiconductor deposition, and subsequent heat treatments, the solar cell is completed with the deposition of a metal electrode onto the CdTe surface. The presence of a pinhole through the semiconductor layers leads to the formation of a wire like connection through the photovoltaic device (shunt, metal connection of the TCO and metal electrodes), which adversely affects the overall performance of the solar cell. Our proposed solution is to fill these pinholes with a resistive material such as polyaniline, using an electrochemical deposition (electrochemical polymerization) technique. The electrochemical deposition technique is performed by applying a voltage across a conductive substrate (TCO coated glass) and an inert electrode (Pt), both placed inside an electrolyte rich solution containing aniline. The aniline monomer then reacts at the positively charged conductive substrate to form a polymer (polyaniline). After the polyaniline film deposition, this new layer acts as an insulating layer, preventing the back contact (Cu/Au) from electrically contacting the TCO layer, thus avoiding shunting of the solar cell. Characterization techniques employed in this study are: depth profilemeter, x-ray photoelectron spectroscopy, electron spray ionization - mass spectrometry, scanning electron microscopy, energy dispersive spectroscopy and grazing angle incidence x-ray diffraction. Subsequently, this technique is applied to CdTe solar cells that have pinholes and on an artificially scribed pinhole. After the electro deposition of polyaniline the CdTe solar cell is completed by metalizing using a Cu-Au back contact, and characterized by JV-measurements, under AM1.5 (terrestrial spectrum). Thus, we were able to obtain promising results that indicate both the deposition of the polymer on the device and hindrance of shunting of the CdTe solar cell.
Download or read book In-depth Analysis of Chloride Treatments for Thin-film CdTe Solar Cells written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: CdTe thin-film solar cells are now the main industrially established alternative to silicon-based photovoltaics. These cells remain reliant on the so-called chloride activation step in order to achieve high conversion efficiencies. Here, by comparison of effective and ineffective chloride treatments, we show the main role of the chloride process to be the modification of grain boundaries through chlorine accumulation, which leads an increase in the carrier lifetime. It is also demonstrated that while improvements in fill factor and short circuit current may be achieved through use of the ineffective chlorides, or indeed simple air annealing, voltage improvement is linked directly to chlorine incorporation at the grain boundaries. Lastly, this suggests that focus on improved or more controlled grain boundary treatments may provide a route to achieving higher cell voltages and thus efficiencies.
Author : Wei Xia
Publisher :
ISBN 13 :
Total Pages : 173 pages
Book Rating : 4.:/5 (875 download)
Download or read book Approaches to Fabricating High-efficiency Ultra-thin CdTe Solar Cells written by Wei Xia and published by . This book was released on 2012 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This thesis is an investigation of the fabrication, characterization and performance of high-efficiency and ultra-thin CdTe solar cells with an aim of reducing the material usage and cell manufacturing cost. Several approaches have been successfully carried out to directly or indirectly improve the device performance. Major achievements are listed below: 1) A close-spaced sublimation (CSS) process with an improved control of the deposition temperature-time profile was developed to fabricate high-quality ultra-thin CdTe films. Three key factors in the CSS process including oxygen pressure, substrate temperature and thermal etch duration were optimized. 2) A two-stage post-deposition treatment including a high temperature annealing (HTA) followed by a vaporous cadmium chloride treatment (VCC) was developed and optimized for the growth of high-quality CdTe films. The effects of HTA and VCC on ultra-thin CdTe solar cells were revealed by a combination of characterization techniques, including photoluminescence. 3) In a collaborative effort two new back contact buffers, MoOx and Te/Cu, were identified and applied in ultra-thin CdTe solar cells. Substitution of a conventional acid etching method with the new back contact buffers was found to enhance the cell efficiency from ~10% to ~13.5%. Moreover, the new buffers improved the reproducibility of cell fabrication. A low-resistance electrical back contact based on the Te/Cu buffer and Ni as electrode was developed. A thermal activation process was found necessary to promote ohmic contact formation. Cu diffusion into the Te layer and CdTe bulk layer occurred during the thermal activation process and must be controlled to prevent excessive diffusion into the CdS/CdTe junction. The effects of Cu concentration and Te thickness on device performance and cell stability were systematically investigated and a cell efficiency as high as ~15% with good stability has been achieved using an optimized Te/Cu buffer. 4) A novel vaporous zinc chloride treatment was developed for the formation of Cd1xZnxS from CdS films. Compared with conventional fabrication methods, the VZC method features simple setup and operation and is capable of producing Cd1xZnxS films with a homogenous structure. The Zn to Cd doping ratio in Cd1−xZnxS can be easily controlled by adjusting the process parameters. By replacing CdS with a more transparent Cd1−xZnxS as the window layer, CdTe solar cells with a higher (12-14%) short-circuit current, Jsc, have been demonstrated"--Page v-vi.
Author : Ahmed H. Zewail
Publisher : World Scientific
ISBN 13 : 1848163908
Total Pages : 359 pages
Book Rating : 4.8/5 (481 download)
Download or read book 4D Electron Microscopy written by Ahmed H. Zewail and published by World Scientific. This book was released on 2010 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural phase transitions, mechanical deformations, and the embryonic stages of melting and crystallization are examples of phenomena that can now be imaged in unprecedented structural detail with high spatial resolution, and ten orders of magnitude as fast as hitherto. No monograph in existence attempts to cover the revolutionary dimensions that EM in its various modes of operation nowadays makes possible. The authors of this book chart these developments, and also compare the merits of coherent electron waves with those of synchrotron radiation. They judge it prudent to recall some important basic procedural and theoretical aspects of imaging and diffraction so that the reader may better comprehend the significance of the new vistas and applications now afoot. This book is not a vade mecum - numerous other texts are available for the practitioner for that purpose.
Author : Fadhil Khalaf Dahash Alfadhili
Publisher :
ISBN 13 :
Total Pages : 100 pages
Book Rating : 4.:/5 (13 download)
Download or read book Development of Back Contacts for CdTe Thin Films Solar Cells written by Fadhil Khalaf Dahash Alfadhili and published by . This book was released on 2020 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin film solar cells based on polycrystalline p-type cadmium telluride (CdTe) represent one of these the most promising photovoltaic (PV) device due to high efficiency and low-cost production. Currently, CdTe solar cells provide the lowest cost electricity generation in utility-scale applications, which is a cost-competitive with the traditional power source, fossil fuel. CdTe thin film PV has attained 22.1 % of power conversion efficiency for small area scale and 18.6 % for modules scale. However, the high efficiency of CdTe devices has been achieved by increasing the photo-generated current by changing the traditional window layer (CdS) of CdTe to a wider bandgap material with better band alignment. The open-circuit voltage (VOC) remains below the theoretical limit due to a barrier at the back of the device due to the deep valence band edge of CdTe (-5.9 eV). Voc can be increased by adding a buffer layer between CdTe and the back electrode to decrease band banding and reducing carrier recombination at the back interface. In this thesis, several materials were investigated as a back-buffer layer, such as single-wall carbon nanotube (SWCNT), zinc telluride (ZnTe), tellurium (Te), and cadmium zinc telluride (CZT) to minimize the bend bending at CdTe/back-buffer layer interface. An alternative method to reduce the carrier recombination at the rear surface, the use of aluminum oxide (Al2O3) layer as a passivation layer was also demonstrated. Finally, an effective method of CdCl2 treatment for CZT thin film was investigated. This method shows that zinc (Zn) can be maintained during the heat treatment.
Author : Deidra Ranel Hodges
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (68 download)
Download or read book Development of CdTe Thin Film Solar Cells on Flexible Foil Substrates written by Deidra Ranel Hodges and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: ABSTRACT: Cadmium telluride (CdTe) is a leading thin film photovoltaic (PV) material due to its near ideal band gap of 1.45 eV, its high optical absorption coefficient and availability of various device fabrication methods. Superstrate CdTe solar cells fabricated on glass have to-date exhibited efficiencies of 16.5%. Work on substrate devices has been limited due to difficulties associated with the formation of an ohmic back contact with CdTe. The most promising approach used to-date is based on the use of an interlayer between the CdTe and a metal electrode, an approach that is believed to yield a pseudo-ohmic contact. This research investigates the use of ZnTe and Sb2Te3 as the interlayer, in the development of efficient back contacts. Excellent adhesion and minimum stress are also required of a CdTe thin film solar cell device on a flexible stainless steel (SS) foil substrate. Foil substrate curvature, flaking, delamination and adhesion as a result of compressive strain due to the coefficient of thermal expansion (CTE) mismatch between the flexible SS foil substrate and the solar cell films have been studied. A potential problem with the use of a SS foil as the substrate is the diffusion of iron (Fe), chromium (Cr) and other elemental impurities into the layers of the solar cell device structure during high temperature processing. A diffusion barrier limiting the out diffusion of these substrate elements is being investigated in this study. Silicon nitride (Si3N4) films deposited on SS foils are being investigated as the barrier layer, to reduce or inhibit the diffusion of substrate impurities into the solar cell. Thin film CdTe solar cells have been fabricated and characterized by AFM, XRD, SEM, ASTM D3359-08 tape test, current-voltage (I-V) and spectral measurements. My individual contributions to this work include the Molybdenum (Mo) development, the adhesion studies, the silicon nitride (Si3N4) barrier studies, and EDS and SEM lines measurements and analysis of substrate out-diffused impurities. The rest of my colleagues focused on the development of CdTe, CdS, ZnTe, the CdCl2 heat treatment, and other back contact interlayer materials.
Author : Victor Plotnikov
Publisher :
ISBN 13 :
Total Pages : 212 pages
Book Rating : 4.:/5 (671 download)
Download or read book Fabrication of Ultra Thin CdS/CdTe Solar Cells by Magnetron Sputtering written by Victor Plotnikov and published by . This book was released on 2009 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: CdTe is a nearly perfect absorber material for second generation polycrystalline solar cells because the bandgap closely matches the peak of the solar spectrum, relatively high absorption coefficient and good electronic properties in the polycrystalline phase. Fabricating high-efficiency CdS/CdTe solar cells with an ultra-thin absorber layer is a challenging yet highly desirable step in improving CdTe technology. Most of today's CdTe solar cells utilize an absorber layer which is about 2.5 microns to 8 microns thick. Thinning this layer down typically results in poorer cell performance due to shunting, incomplete photon absorption, fully depleted CdTe layer or interference between the main and the back contact junction when the CdTe layer thickness approaches a certain limit. While some of these losses are fundamental, others can be minimized by careful optimization of the fabrication steps. In this dissertation I present the results of such optimization. Magnetron sputtered CdS/CdTe solar cells with the absorber layer thicknesses from 2.6 microns to 0.3 microns were studied. The deposition process itself and all the post-deposition parameters such as the CdCl2 treatment, thickness of the Cu layer in the thermally evaporated Cu/Au back contact, and the back contact thermal activation/diffusion time for a given CdTe layer thickness were optimized to achieve the top performance for the cell of a given thickness. 13.5 % efficiency cells with 2.5 microns CdTe, 12% cells with 1 microns CdTe, 9.7% cells with 0.5 microns CdTe and 6.7% with 0.3 microns CdTe were fabricated.
Author : Aparna Thankappan
Publisher : Academic Press
ISBN 13 : 0128129166
Total Pages : 521 pages
Book Rating : 4.1/5 (281 download)
Download or read book Perovskite Photovoltaics written by Aparna Thankappan and published by Academic Press. This book was released on 2018-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Photovoltaics: Basic to Advanced Concepts and Implementation examines the emergence of perovskite photovoltaics, associated challenges and opportunities, and how to achieve broader development. Consolidating developments in perovskite photovoltaics, including recent progress solar cells, this text also highlights advances and the research necessary for sustaining energy. Addressing different photovoltaics fields with tailored content for what makes perovskite solar cells suitable, and including commercialization examples of large-scale perovskite solar technology. The book also contains a detailed analysis of the implementation and economic viability of perovskite solar cells, highlighting what photovoltaic devices need to be generated by low cost, non-toxic, earth abundant materials using environmentally scalable processes. This book is a valuable resource engineers, scientists and researchers, and all those who wish to broaden their knowledge on flexible perovskite solar cells. - Includes contributions by leading solar cell academics, industrialists, researchers and institutions across the globe - Addresses different photovoltaics fields with tailored content for what makes perovskite solar cells different - Provides commercialization examples of large-scale perovskite solar technology, giving users detailed analysis on the implementation, technical challenges and economic viability of perovskite solar cells
Author : Guogen Liu
Publisher :
ISBN 13 :
Total Pages : 105 pages
Book Rating : 4.:/5 (116 download)
Download or read book Processing of CdS/CdTe Solar Cell and the Growth Model of CdTe Thin Film written by Guogen Liu and published by . This book was released on 2016 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cadmium telluride is the only thin film photovoltaic (PV) technology to surpass crystalline silicon PV in the cost. The most common CdTe solar cells consist of a simple p-n heterojunction structure containing a p-doped CdTe layer and n-doped cadmium sulfide (CdS) layer, which acts as a window layer. Cadmium Sulfide (CdS) thin films are often deposited on glass substrates coated with TCO layers by the close-spaced sublimation (CSS) or sputter techniques in industrial because of in-line production integration. It is seldom reported that CdS is deposited by the chemical bath deposition (CBD) batch process. The bottleneck of CBD for commercial application is its low production rate and waste water treatment. This dissertation reports how to produce different thickness large area (100cm2) CdS thin film by CBD. The influence of the solution temperature and concentration on the thickness of CdS is investigated. This dissertation also reports a growth model for CdTe deposition including diffusion limited and sublimation limited. The model was consistent with experimental observations and showed very good agreement over a range of operating conditions.
Author : Gerasimos Konstantatos
Publisher : Cambridge University Press
ISBN 13 : 0521198267
Total Pages : 329 pages
Book Rating : 4.5/5 (211 download)
Download or read book Colloidal Quantum Dot Optoelectronics and Photovoltaics written by Gerasimos Konstantatos and published by Cambridge University Press. This book was released on 2013-11-07 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Captures the most up-to-date research in the field, written in an accessible style by the world's leading experts.
