Corrosion Problems And Solutions In Oil Refining And Petrochemical Industry

Download Corrosion Problems And Solutions In Oil Refining And Petrochemical Industry full books in PDF, epub, and Kindle. Read online Corrosion Problems And Solutions In Oil Refining And Petrochemical Industry ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry

Author : Alec Groysman
Publisher : Springer
ISBN 13 : 3319452568
Total Pages : 356 pages
Book Rating : 4.3/5 (194 download)

DOWNLOAD NOW!

Book Synopsis Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry by : Alec Groysman

Download or read book Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry written by Alec Groysman and published by Springer. This book was released on 2016-10-24 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion fatigue occurring at refinery units. At last, fouling, corrosion and cleaning are discussed in this book.

Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry

Author : Alec Groysman
Publisher : Springer
ISBN 13 : 9783319832517
Total Pages : 0 pages
Book Rating : 4.8/5 (325 download)

DOWNLOAD NOW!

Book Synopsis Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry by : Alec Groysman

Download or read book Corrosion Problems and Solutions in Oil Refining and Petrochemical Industry written by Alec Groysman and published by Springer. This book was released on 2018-06-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion fatigue occurring at refinery units. At last, fouling, corrosion and cleaning are discussed in this book.

Amine Unit Corrosion in Refineries

Author : J Harston
Publisher : Elsevier
ISBN 13 : 184569323X
Total Pages : 56 pages
Book Rating : 4.8/5 (456 download)

DOWNLOAD NOW!

Book Synopsis Amine Unit Corrosion in Refineries by : J Harston

Download or read book Amine Unit Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2007-04-18 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximising amine unit reliability, together with improving throughput, circulation and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarising findings from over 30 plants. It covers such amine types as methyl diethanolamine (MDEA), diethanolamine (DEA), monoethanolamine (MEA) and di-isopropanolamine (DIPA), and makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability. Covers such amine types as Methyl Diethanolamine (MDEA) and Di-isopropanolamine Makes recommendations on materials and process parameters to maximise amine unit efficiency and reliability

Corrosion Inhibitors in the Oil and Gas Industry

Author : Viswanathan S. Saji
Publisher : John Wiley & Sons
ISBN 13 : 3527822135
Total Pages : 446 pages
Book Rating : 4.5/5 (278 download)

DOWNLOAD NOW!

Book Synopsis Corrosion Inhibitors in the Oil and Gas Industry by : Viswanathan S. Saji

Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-02-10 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.

Corrosion in the Petrochemical Industry, Second Edition

Author :
Publisher : ASM International
ISBN 13 : 1627080945
Total Pages : 426 pages
Book Rating : 4.6/5 (27 download)

DOWNLOAD NOW!

Book Synopsis Corrosion in the Petrochemical Industry, Second Edition by :

Download or read book Corrosion in the Petrochemical Industry, Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.

Applied Metallurgy and Corrosion Control

Author : Amiya Kumar Lahiri
Publisher : Springer
ISBN 13 : 9811046840
Total Pages : 544 pages
Book Rating : 4.8/5 (11 download)

DOWNLOAD NOW!

Book Synopsis Applied Metallurgy and Corrosion Control by : Amiya Kumar Lahiri

Download or read book Applied Metallurgy and Corrosion Control written by Amiya Kumar Lahiri and published by Springer. This book was released on 2017-08-23 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a comprehensive resource on metals and materials selection for the petrochemical industrial sector. The petrochemical industry involves large scale investments, and to maintain profitability the plants are to be operated with minimum downtime and failure of equipment, which can also cause safety hazards. To achieve this objective proper selection of materials, corrosion control, and good engineering practices must be followed in both the design and the operation of plants. Engineers and professional of different disciplines involved in these activities are required to have some basic understanding of metallurgy and corrosion. This book is written with the objective of servings as a one-stop shop for these engineering professionals. The book first covers different metallic materials and their properties, metal forming processes, welding, and corrosion and corrosion control measures. This is followed by considerations in material selection and corrosion control in three major industrial sectors, oil & gas production, oil refinery, and fertilizers. The importance of pressure vessel codes as well as inspection and maintenance repair practices have also been highlighted. The book will be useful for technicians and entry level engineers in these industrial sectors. Additionally, the book may also be used as primary or secondary reading for graduate and professional coursework.

Fouling in Refineries

Author : James G. Speight
Publisher : Gulf Professional Publishing
ISBN 13 : 0128011459
Total Pages : 538 pages
Book Rating : 4.1/5 (28 download)

DOWNLOAD NOW!

Book Synopsis Fouling in Refineries by : James G. Speight

Download or read book Fouling in Refineries written by James G. Speight and published by Gulf Professional Publishing. This book was released on 2015-05-14 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fouling in Refineries is an important and ongoing problem that directly affects energy efficiency resulting in increased costs, production losses, and even unit shutdown, requiring costly expenditures to clean up equipment and return capacity to positive levels. This text addresses this common challenge for the hydrocarbon processing community within each unit of the refinery. As refineries today face a greater challenge of accepting harder to process heavier crudes and the ongoing flow of the lighter shale oil feedstocks, resulting in bigger challenges to balance product stability within their process equipment, this text seeks to inform all relative refinery personnel on how to monitor fouling, characterize the deposits, and follow all available treatments. With basic modeling and chemistry of fouling and each unit covered, users will learn how to operate at maximum production rates and elongate the efficiency of their refinery’s capacity. Presents an understanding of the breakdown of fouling per refinery unit, including distillation and coking units Provides all the factors, crude types, and refining blends that cause fouling, especially the unconventional feedstocks and high acid crudes used today Helps users develop an analysis-based treatment and control strategy that empowers them to operate refinery equipment at a level that prevents fouling from occurring

Corrosion Control in the Oil and Gas Industry

Author : Sankara Papavinasam
Publisher : Elsevier
ISBN 13 : 0123973066
Total Pages : 1020 pages
Book Rating : 4.1/5 (239 download)

DOWNLOAD NOW!

Book Synopsis Corrosion Control in the Oil and Gas Industry by : Sankara Papavinasam

Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. Selects cost-effective methods to control corrosion Quantitatively measures and estimates corrosion rates Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others Provides a gateway to more than 1,000 industry best practices and international standards

Metallurgy and Corrosion Control in Oil and Gas Production

Author : Robert Heidersbach
Publisher : John Wiley & Sons
ISBN 13 : 1119252385
Total Pages : 368 pages
Book Rating : 4.1/5 (192 download)

DOWNLOAD NOW!

Book Synopsis Metallurgy and Corrosion Control in Oil and Gas Production by : Robert Heidersbach

Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.

Corrosion in the Petrochemical Industry

Author : Linda Garverick
Publisher : ASM International
ISBN 13 : 9780871705051
Total Pages : 524 pages
Book Rating : 4.7/5 (5 download)

DOWNLOAD NOW!

Book Synopsis Corrosion in the Petrochemical Industry by : Linda Garverick

Download or read book Corrosion in the Petrochemical Industry written by Linda Garverick and published by ASM International. This book was released on 1994-01-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive collection of peer-reviewed data and information on corrosion in the petroleum, petrochemical, and chemical processing industries from a number of ASM International publications. The principal sources are Corrosion, Volume 13, and Failure Analysis and Prevention, Volume 11 of ASM H

Oil and Gas Production Handbook: An Introduction to Oil and Gas Production

Author : Havard Devold
Publisher : Lulu.com
ISBN 13 : 1105538648
Total Pages : 84 pages
Book Rating : 4.1/5 (55 download)

DOWNLOAD NOW!

Book Synopsis Oil and Gas Production Handbook: An Introduction to Oil and Gas Production by : Havard Devold

Download or read book Oil and Gas Production Handbook: An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Essentials of Coating, Painting, and Lining for the Oil, Gas and Petrochemical Industries

Author : Alireza Bahadori
Publisher : Gulf Professional Publishing
ISBN 13 : 0128016655
Total Pages : 830 pages
Book Rating : 4.1/5 (28 download)

DOWNLOAD NOW!

Book Synopsis Essentials of Coating, Painting, and Lining for the Oil, Gas and Petrochemical Industries by : Alireza Bahadori

Download or read book Essentials of Coating, Painting, and Lining for the Oil, Gas and Petrochemical Industries written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2015-01-06 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the oil and gas industry facing new challenges—deeper offshore installations, more unconventional oil and gas transporting through pipelines, and refinery equipment processing these opportunity feedstocks--new corrosion challenges are appearing, and the oil and gas industry’s infrastructure is only as good as the quality of protection provided and maintained. Essentials of Coating, Painting, and Linings for the Oil, Gas, and Petrochemical Industries is the first guide of its kind to directly deliver the necessary information to prevent and control corrosion for the components on the offshore rig, pipelines underground and petrochemical equipment. Written as a companion to Cathodic Corrosion Protection Systems, this must-have training tool supplies the oil and gas engineer, inspector and manager with the full picture of corrosion prevention methods specifically catered for oil and gas services. Packed with real world case studies, critical qualifications, inspection criteria, suggested procedure tests, and application methods, Essentials of Coating, Painting, and Linings for the Oil, Gas and Petrochemical Industries is a required straightforward reference for any oil and gas engineer and manager. Understand how to select, prime and apply the right coating system for various oil and gas equipment and pipelines – both upstream and downstream Train personnel with listed requirements, evaluation material and preparation guides, including important environmental compliance considerations Improve the quality of your equipment, refinery and pipeline with information on repair and rejection principles

Processing of Heavy Crude Oils

Author : Ramasamy Marappa Gounder
Publisher :
ISBN 13 : 1839684097
Total Pages : 274 pages
Book Rating : 4.8/5 (396 download)

DOWNLOAD NOW!

Book Synopsis Processing of Heavy Crude Oils by : Ramasamy Marappa Gounder

Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Fundamentals of Petroleum Refining

Author : Mohamed A. Fahim
Publisher : Elsevier
ISBN 13 : 9780080931562
Total Pages : 516 pages
Book Rating : 4.9/5 (315 download)

DOWNLOAD NOW!

Book Synopsis Fundamentals of Petroleum Refining by : Mohamed A. Fahim

Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. Provides balanced coverage of fundamental and operational topics Includes spreadsheets and process simulators for showing trends and simulation case studies Relates processing to planning and management to give an integrated picture of refining

Production Chemicals for the Oil and Gas Industry, Second Edition

Author : Malcolm A. Kelland
Publisher : CRC Press
ISBN 13 : 143987381X
Total Pages : 454 pages
Book Rating : 4.4/5 (398 download)

DOWNLOAD NOW!

Book Synopsis Production Chemicals for the Oil and Gas Industry, Second Edition by : Malcolm A. Kelland

Download or read book Production Chemicals for the Oil and Gas Industry, Second Edition written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance—information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.

Corrosion in Refineries

Author : J Harston
Publisher : Elsevier
ISBN 13 : 1845693248
Total Pages : 128 pages
Book Rating : 4.8/5 (456 download)

DOWNLOAD NOW!

Book Synopsis Corrosion in Refineries by : J Harston

Download or read book Corrosion in Refineries written by J Harston and published by Elsevier. This book was released on 2014-01-23 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion in ageing refinery plant presents a serious safety hazard. This important book summarises key research into corrosion processes in refinery equipment, how it can be measured and controlled. The book reviews factors affecting corrosion such as carburisation and metal dusting as well as corrosion in steel and other materials used in refinery technology. It considers corrosion in a range of refinery equipment such as storage tanks, HF alkylation units, sour water strippers and insulated units. Other chapters discuss ways of testing for corrosion and cracking in refineries together with integrity and life cycle assessment techniques. There is also coverage of ways of trouble-shooting corrosion problems and preventative measures such as coating systems. With its distinguished editor and team of contributors, Corrosion in refineries is a valuable reference for all those concerned with building and maintaining refineries in the petrochemical industry. Summarises key research into corrosion processes in refinery equipment Discusses ways of testing for corrosion and cracking in refineries

Petroleum Engineer's Guide to Oil Field Chemicals and Fluids

Author : Johannes Fink
Publisher : Gulf Professional Publishing
ISBN 13 : 0123838452
Total Pages : 809 pages
Book Rating : 4.1/5 (238 download)

DOWNLOAD NOW!

Book Synopsis Petroleum Engineer's Guide to Oil Field Chemicals and Fluids by : Johannes Fink

Download or read book Petroleum Engineer's Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index