Automated Motion Planning For A Femtosecond Laser Micromachining System

Download Automated Motion Planning For A Femtosecond Laser Micromachining System full books in PDF, epub, and Kindle. Read online Automated Motion Planning For A Femtosecond Laser Micromachining System ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Micromachining

Author : Zdravko Stanimirović
Publisher : BoD – Books on Demand
ISBN 13 : 1789238099
Total Pages : 174 pages
Book Rating : 4.7/5 (892 download)

DOWNLOAD NOW!

Book Synopsis Micromachining by : Zdravko Stanimirović

Download or read book Micromachining written by Zdravko Stanimirović and published by BoD – Books on Demand. This book was released on 2019-11-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: To present their work in the field of micromachining, researchers from distant parts of the world have joined their efforts and contributed their ideas according to their interest and engagement. Their articles will give you the opportunity to understand the concepts of micromachining of advanced materials. Surface texturing using pico- and femto-second laser micromachining is presented, as well as the silicon-based micromachining process for flexible electronics. You can learn about the CMOS compatible wet bulk micromachining process for MEMS applications and the physical process and plasma parameters in a radio frequency hybrid plasma system for thin-film production with ion assistance. Last but not least, study on the specific coefficient in the micromachining process and multiscale simulation of influence of surface defects on nanoindentation using quasi-continuum method provides us with an insight in modelling and the simulation of micromachining processes. The editors hope that this book will allow both professionals and readers not involved in the immediate field to understand and enjoy the topic.

Factories of the Future

Author : Tullio Tolio
Publisher : Springer
ISBN 13 : 3319943588
Total Pages : 490 pages
Book Rating : 4.3/5 (199 download)

DOWNLOAD NOW!

Book Synopsis Factories of the Future by : Tullio Tolio

Download or read book Factories of the Future written by Tullio Tolio and published by Springer. This book was released on 2019-02-14 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license.This book presents results relevant in the manufacturing research field, that are mainly aimed at closing the gap between the academic investigation and the industrial application, in collaboration with manufacturing companies. Several hardware and software prototypes represent the key outcome of the scientific contributions that can be grouped into five main areas, representing different perspectives of the factory domain:1) Evolutionary and reconfigurable factories to cope with dynamic production contexts characterized by evolving demand and technologies, products and processes.2) Factories for sustainable production, asking for energy efficiency, low environmental impact products and processes, new de-production logics, sustainable logistics.3) Factories for the People who need new kinds of interactions between production processes, machines, and human beings to offer a more comfortable and stimulating working environment.4) Factories for customized products that will be more and more tailored to the final user’s needs and sold at cost-effective prices.5) High performance factories to yield the due production while minimizing the inefficiencies caused by failures, management problems, maintenance.This books is primarily targeted to academic researchers and industrial practitioners in the manufacturing domain.

Micro-Manufacturing Technologies and Their Applications

Author : Irene Fassi
Publisher : Springer
ISBN 13 : 331939651X
Total Pages : 301 pages
Book Rating : 4.3/5 (193 download)

DOWNLOAD NOW!

Book Synopsis Micro-Manufacturing Technologies and Their Applications by : Irene Fassi

Download or read book Micro-Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.

Analysis of Machining and Machine Tools

Author : Steven Liang
Publisher : Springer
ISBN 13 : 1489976450
Total Pages : 241 pages
Book Rating : 4.4/5 (899 download)

DOWNLOAD NOW!

Book Synopsis Analysis of Machining and Machine Tools by : Steven Liang

Download or read book Analysis of Machining and Machine Tools written by Steven Liang and published by Springer. This book was released on 2015-12-29 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the fundamental, analytical, and quantitative knowledge of machining process planning and optimization based on advanced and practical understanding of machinery, mechanics, accuracy, dynamics, monitoring techniques, and control strategies that they need to understanding machining and machine tools. It is written for first-year graduate students in mechanical engineering, and is also appropriate for use as a reference book by practicing engineers. It covers topics such as single and multiple point cutting processes; grinding processes; machine tool components, accuracy, and metrology; shear stress in cutting, cutting temperature and thermal analysis, and machine tool chatter. The second section of the book is devoted to “Non-Traditional Machining,” where readers can find chapters on electrical discharge machining, electrochemical machining, laser and electron beam machining, and biomedical machining. Examples of realistic problems that engineers are likely to face in the field are included, along with solutions and explanations that foster a didactic learning experience.

Surgical Robotics

Author : Jacob Rosen
Publisher : Springer Science & Business Media
ISBN 13 : 144191126X
Total Pages : 827 pages
Book Rating : 4.4/5 (419 download)

DOWNLOAD NOW!

Book Synopsis Surgical Robotics by : Jacob Rosen

Download or read book Surgical Robotics written by Jacob Rosen and published by Springer Science & Business Media. This book was released on 2011-01-15 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surgical robotics is a rapidly evolving field. With roots in academic research, surgical robotic systems are now clinically used across a wide spectrum of surgical procedures. Surgical Robotics: Systems Applications and Visions provides a comprehensive view of the field both from the research and clinical perspectives. This volume takes a look at surgical robotics from four different perspectives, addressing vision, systems, engineering development and clinical applications of these technologies. The book also: -Discusses specific surgical applications of robotics that have already been deployed in operating rooms -Covers specific engineering breakthroughs that have occurred in surgical robotics -Details surgical robotic applications in specific disciplines of surgery including orthopedics, urology, cardiac surgery, neurosurgery, ophthalmology, pediatric surgery and general surgery Surgical Robotics: Systems Applications and Visions is an ideal volume for researchers and engineers working in biomedical engineering.

Scaffolds for Tissue Engineering

Author : Claudio Migliaresi
Publisher : CRC Press
ISBN 13 : 9814463213
Total Pages : 671 pages
Book Rating : 4.8/5 (144 download)

DOWNLOAD NOW!

Book Synopsis Scaffolds for Tissue Engineering by : Claudio Migliaresi

Download or read book Scaffolds for Tissue Engineering written by Claudio Migliaresi and published by CRC Press. This book was released on 2014-06-10 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scaffolds for tissue engineering are devices that exploit specific and complex physical and biological functions, in vitro or in vivo, and communicate through biochemical and physical signals with cells and, when implanted, with the body environment. Scaffolds are produced mainly with synthetic materials, and their fabrication technologies are deri

Cold Micro Metal Forming

Author : Frank Vollertsen
Publisher : Springer Nature
ISBN 13 : 3030112802
Total Pages : 370 pages
Book Rating : 4.0/5 (31 download)

DOWNLOAD NOW!

Book Synopsis Cold Micro Metal Forming by : Frank Vollertsen

Download or read book Cold Micro Metal Forming written by Frank Vollertsen and published by Springer Nature. This book was released on 2019-09-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

Advances in Micro and Nano Manufacturing and Surface Engineering

Author : M. S. Shunmugam
Publisher : Springer Nature
ISBN 13 : 9813294256
Total Pages : 720 pages
Book Rating : 4.8/5 (132 download)

DOWNLOAD NOW!

Book Synopsis Advances in Micro and Nano Manufacturing and Surface Engineering by : M. S. Shunmugam

Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Mobile Microrobotics

Author : Metin Sitti
Publisher : MIT Press
ISBN 13 : 0262341018
Total Pages : 305 pages
Book Rating : 4.2/5 (623 download)

DOWNLOAD NOW!

Book Synopsis Mobile Microrobotics by : Metin Sitti

Download or read book Mobile Microrobotics written by Metin Sitti and published by MIT Press. This book was released on 2017-06-16 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. Progress in micro- and nano-scale science and technology has created a demand for new microsystems for high-impact applications in healthcare, biotechnology, manufacturing, and mobile sensor networks. The new robotics field of microrobotics has emerged to extend our interactions and explorations to sub-millimeter scales. This is the first textbook on micron-scale mobile robotics, introducing the fundamentals of design, analysis, fabrication, and control, and drawing on case studies of existing approaches. The book covers the scaling laws that can be used to determine the dominant forces and effects at the micron scale; models forces acting on microrobots, including surface forces, friction, and viscous drag; and describes such possible microfabrication techniques as photo-lithography, bulk micromachining, and deep reactive ion etching. It presents on-board and remote sensing methods, noting that remote sensors are currently more feasible; studies possible on-board microactuators; discusses self-propulsion methods that use self-generated local gradients and fields or biological cells in liquid environments; and describes remote microrobot actuation methods for use in limited spaces such as inside the human body. It covers possible on-board powering methods, indispensable in future medical and other applications; locomotion methods for robots on surfaces, in liquids, in air, and on fluid-air interfaces; and the challenges of microrobot localization and control, in particular multi-robot control methods for magnetic microrobots. Finally, the book addresses current and future applications, including noninvasive medical diagnosis and treatment, environmental remediation, and scientific tools.

Pulsed Laser Ablation of Solids

Author : Mihai Stafe
Publisher : Springer Science & Business Media
ISBN 13 : 3642409784
Total Pages : 241 pages
Book Rating : 4.6/5 (424 download)

DOWNLOAD NOW!

Book Synopsis Pulsed Laser Ablation of Solids by : Mihai Stafe

Download or read book Pulsed Laser Ablation of Solids written by Mihai Stafe and published by Springer Science & Business Media. This book was released on 2013-11-09 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces ‘the state of the art' of pulsed laser ablation and its applications. It is based on recent theoretical and experimental studies. The book reaches from the basics to advanced topics of pulsed laser ablation. Theoretical and experimental fundamental phenomena involved in pulsed laser ablation are discussed with respect to material properties, laser wavelength, fluence and intensity regime of the light absorbed linearly or non-linearly in the target material. The energy absorbed by the electrons leads to atom/molecule excitation, ionization and/or direct chemical bond breaking and is also transferred to the lattice leading to material heating and phase transitions. Experimental non-invasive optical methods for analyzing these phenomena in real time are described. Theoretical models for pulsed laser ablation and phase transitions induced by laser beams and laser-vapour/plasma interaction during the plume expansion above the target are also presented. Calculations of the ablation speed and dimensions of the ablated micro- and nano-structures are performed. The validity and required refinement of different models in different experimental conditions is provided. The pulsed laser deposition process which bases on collecting the ablated particles on a surface is analyzed in terms of efficiency and quality of the deposited films as a function of ambient conditions, target material, laser parameters and substrate characteristics. The interaction between the incident laser and the ablation plasma is analyzed with respect to its influence on the structures of the deposited films and its capacity to generate high harmonics and single attosecond pulses which are highly desirable in pump-probe experiments.

Transmission Electron Microscopy

Author : C. Barry Carter
Publisher : Springer
ISBN 13 : 3319266519
Total Pages : 543 pages
Book Rating : 4.3/5 (192 download)

DOWNLOAD NOW!

Book Synopsis Transmission Electron Microscopy by : C. Barry Carter

Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.

Laser - Surface Interactions

Author : Rashid A. Ganeev
Publisher : Springer Science & Business Media
ISBN 13 : 9400773412
Total Pages : 271 pages
Book Rating : 4.4/5 (7 download)

DOWNLOAD NOW!

Book Synopsis Laser - Surface Interactions by : Rashid A. Ganeev

Download or read book Laser - Surface Interactions written by Rashid A. Ganeev and published by Springer Science & Business Media. This book was released on 2013-10-17 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the interaction of laser radiation with various surfaces at variable parameters of radiation. As a basic principle of classification we chose the energetic or intensity level of interaction of laser radiation with the surfaces. These two characteristics of laser radiation are the most important parameters defining entire spectrum of the processes occurring on the surfaces during interaction with electromagnetic waves. This is a first book containing a whole spectrum of the laser-surface interactions distinguished by the ranges of used laser intensity. It combines the surface response starting from extremely weak laser intensities (~1 W cm-2) up to the relativistic intensities (~1020 W cm-2 and higher). The book provides the basic information about lasers and acquaints the reader with both common applications of laser-surface interactions (laser-related printers, scanners, barcode readers, discs, material processing, military, holography, medicine, etc) and unusual uses of the processes on the surfaces under the action of lasers (art conservation, rangefinders and velocimeters, space and earth explorations, surface engineering and ablation, and others). The scientific applications of laser-surfaces interactions (surface optical nonlinearities, surface enhanced Raman spectroscopy, surface nanostructuring, nanoripples and clusters formation, X-ray lasers and harmonic generation from the surfaces) are discussed from the point of view of the close relations between the properties of surface and matter, which is a cornerstone of most of studies of materials. The novelty of the approach developed in Laser - Surface Interactions is related with the interconnection of scientific studies with numerous applications of the laser-surface interactions separated in different chapters by the ranges of laser intensities. We present most recent achievements in this field. The book provides valuable information for different ranges of reader's preparedness to the laser-related topics (from unprepared readers, to students, engineers and researchers, professionals and academics).

Design and Manufacturing of Active Microsystems

Author : Stephanus Büttgenbach
Publisher : Springer Science & Business Media
ISBN 13 : 364212903X
Total Pages : 447 pages
Book Rating : 4.6/5 (421 download)

DOWNLOAD NOW!

Book Synopsis Design and Manufacturing of Active Microsystems by : Stephanus Büttgenbach

Download or read book Design and Manufacturing of Active Microsystems written by Stephanus Büttgenbach and published by Springer Science & Business Media. This book was released on 2011-03-04 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design and manufacturing of microsystems as well as necessary key technologies developed within the Collaborative Research Center 516. The research efforts of this collaboration are focused on active micro systems which are based on the electromagnetic actuator principle. The travel of the investigated actuator systems is on the order of several millimeters. The total construction size of the actuator is on the range of several centimeters whereas essential structures being several micrometers. The methods and the production technologies that are investigated on the basis of various research models incorporate the fundamental process chains of microsystems.

Laser Ablation and Its Applications

Author : Claude Phipps
Publisher : Springer Science & Business Media
ISBN 13 : 0387304525
Total Pages : 598 pages
Book Rating : 4.3/5 (873 download)

DOWNLOAD NOW!

Book Synopsis Laser Ablation and Its Applications by : Claude Phipps

Download or read book Laser Ablation and Its Applications written by Claude Phipps and published by Springer Science & Business Media. This book was released on 2007 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation describes the interaction of intense optical fields with matter, in which atoms are selectively driven off by thermal or nonthermal mechanisms. The field of laser ablation physics is advancing so rapidly that its principal results are seen only in specialized journals and conferences. This is the first book that combines the most recent results in this rapidly advancing field with authoritative treatment of laser ablation and its applications, including the physics of high-power laser-matter interaction. Many practical applications exist, ranging from inertial confinement fusion to propulsion of aerostats for pollution monitoring to laser ignition of hypersonic engines to laser cleaning nanoscale contaminants in high-volume computer hard drive manufacture to direct observation of the electronic or dissociative states in atoms and molecules, to studying the properties of materials during 200kbar shocks developed in 200fs. Selecting topics which are representative of such a broad field is difficult. Laser Ablation and its Applications emphasizes the wide range of these topics rather than - as is so often the case in advanced science – focusing on one specialty or discipline. The book is divided into four sections: theory and modeling, ultrafast interactions, material processing and laser-matter interaction in novel regimes. The latter range from MALDI to ICF, SNOM’s and femtosecond nanosurgery to laser space propulsion. The book arose from the SPIE series of High Power Laser Ablation Symposia which began in 1998. It is intended for a graduate course in laser interactions with plasmas and materials, but it should be accessible to anyone with a graduate degree in physics or engineering. It is also intended as a major reference work to familiarize scientists just entering the field with laser ablation and its applications.

Advanced Machining Processes

Author : Hassan Abdel-Gawad El-Hofy
Publisher : McGraw Hill Professional
ISBN 13 : 0071466940
Total Pages : 287 pages
Book Rating : 4.0/5 (714 download)

DOWNLOAD NOW!

Book Synopsis Advanced Machining Processes by : Hassan Abdel-Gawad El-Hofy

Download or read book Advanced Machining Processes written by Hassan Abdel-Gawad El-Hofy and published by McGraw Hill Professional. This book was released on 2005-03-22 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s stringent design requirements and difficult-to-machine materials such as tough super alloys, ceramics, and composites, have made traditional machining processes costly and obsolete. As a result, manufacturers and machine design engineers are turning to advance machining processes. These machining processes utilizes electrical, chemical, and optimal sources of energy to bind, form and cut materials. El-Hofy rigorously explains how each of these advanced machining process work, their machining system components, process variables and industrial applications, making this book the perfect guide for anyone designing, researching or converting to a more advance machining process.

Machining Technology for Composite Materials

Author : H Hocheng
Publisher : Elsevier
ISBN 13 : 0857095145
Total Pages : 488 pages
Book Rating : 4.8/5 (57 download)

DOWNLOAD NOW!

Book Synopsis Machining Technology for Composite Materials by : H Hocheng

Download or read book Machining Technology for Composite Materials written by H Hocheng and published by Elsevier. This book was released on 2011-11-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining processes play an important role in the manufacture of a wide variety of components. While the processes required for metal components are well-established, they cannot always be applied to composite materials, which instead require new and innovative techniques. Machining technology for composite materials provides an extensive overview and analysis of both traditional and non-traditional methods of machining for different composite materials.The traditional methods of turning, drilling and grinding are discussed in part one, which also contains chapters analysing cutting forces, tool wear and surface quality. Part two covers non-traditional methods for machining composite materials, including electrical discharge and laser machining, among others. Finally, part three contains chapters that deal with special topics in machining processes for composite materials, such as cryogenic machining and processes for wood-based composites.With its renowned editor and distinguished team of international contributors, Machining technology for composite materials is an essential reference particularly for process designers and tool and production engineers in the field of composite manufacturing, but also for all those involved in the fabrication and assembly of composite structures, including the aerospace, marine, civil and leisure industry sectors. - Provides an extensive overview of machining methods for composite materials - Chapters analyse cutting forces, tool wear and surface quality - Cryogenic machining and processes for wood based composites are discussed

Tailored Light 2

Author : Reinhart Poprawe
Publisher : Springer Science & Business Media
ISBN 13 : 364201237X
Total Pages : 604 pages
Book Rating : 4.6/5 (42 download)

DOWNLOAD NOW!

Book Synopsis Tailored Light 2 by : Reinhart Poprawe

Download or read book Tailored Light 2 written by Reinhart Poprawe and published by Springer Science & Business Media. This book was released on 2011-01-22 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book covers the application technology of lasers, focusing more on the vast range of processes than on individual applications, in order to motivate and enable future innovations. The physical basics are presented in the first half of the book. The following examination of application categories and their processes is documented by experts from their practical points of view but always refers back to the underlying physical principles. In this way, readers are free to choose their own individual level of depth in understanding this globally relevant field of innovation.