Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Automated Mode Recovery And Electronic Stability Control For Wendelstein 7 X Gyrotrons
Download Automated Mode Recovery And Electronic Stability Control For Wendelstein 7 X Gyrotrons full books in PDF, epub, and Kindle. Read online Automated Mode Recovery And Electronic Stability Control For Wendelstein 7 X Gyrotrons ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Automated Mode Recovery and Electronic Stability Control for Wendelstein 7-X Gyrotrons by : Wilde, Fabian
Download or read book Automated Mode Recovery and Electronic Stability Control for Wendelstein 7-X Gyrotrons written by Wilde, Fabian and published by KIT Scientific Publishing. This book was released on 2024-08-07 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic confinement fusion relies on plasma heating and plasma control using gyrotron oscillators providing at megawatt power levels. The operational reliability decreases when operating at the performance limits due to increasing parasitic mode activity. This work demonstrates for the first time the automated, fast recovery of nominal gyrotron operation during a pulse by exploiting the hysteretic gyrotron behaviour after a mode switch being in use at the Wendelstein 7-X ECRH facility.
Book Synopsis Automated Mode Recovery and Electronic Stability Control for Wendelstein 7-X Gyrotrons by : Fabian Wilde
Download or read book Automated Mode Recovery and Electronic Stability Control for Wendelstein 7-X Gyrotrons written by Fabian Wilde and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis MultPhysics Modelling towards the Stabilization of PAN Fibers with Microwaves Based on Experimental Data by : Hofele, Julia
Download or read book MultPhysics Modelling towards the Stabilization of PAN Fibers with Microwaves Based on Experimental Data written by Hofele, Julia and published by KIT Scientific Publishing. This book was released on 2024-07-10 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: High energy demand is one reason for high costs of carbon fibers. One option to decrease them is to use microwave heating instead of conventional heating. In this work, steps towards a microwave assisted process during the stabilization phase are presented. In-situ dielectric measurements are performed and a reaction kinetics model is setup in connection to the dielectric loss. This allows to calculate a stabilization degree and fiber temperatures leading to a basic process understanding.
Book Synopsis Magnetic Fusion Technology by : Thomas J. Dolan
Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.
Book Synopsis Fundamentals of Magnetic Thermonuclear Reactor Design by : Vasilij A. Glukhikh
Download or read book Fundamentals of Magnetic Thermonuclear Reactor Design written by Vasilij A. Glukhikh and published by Woodhead Publishing. This book was released on 2018-05-21 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. - Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years - Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations - Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents
Book Synopsis Inverse Dynamic Game Methods for Identification of Cooperative System Behavior by : Inga Charaja, Juan Jairo
Download or read book Inverse Dynamic Game Methods for Identification of Cooperative System Behavior written by Inga Charaja, Juan Jairo and published by KIT Scientific Publishing. This book was released on 2021-07-12 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work addresses inverse dynamic games, which generalize the inverse problem of optimal control, and where the aim is to identify cost functions based on observed optimal trajectories. The identified cost functions can describe individual behavior in cooperative systems, e.g. human behavior in human-machine haptic shared control scenarios.
Book Synopsis State-of-the-Art of High-Power Gyro-Devices. Update of Experimental Results 2021. (KIT Scientific Reports ; 7761) by : Thumm, Manfred
Download or read book State-of-the-Art of High-Power Gyro-Devices. Update of Experimental Results 2021. (KIT Scientific Reports ; 7761) written by Thumm, Manfred and published by KIT Scientific Publishing. This book was released on 2021-10-28 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents an update of the experimental achievements published in the review “State- of-the-Art of High-Power Gyro-Devices and Free Electron Masers”, Journal of Infrared, Millime-ter, and Terahertz Waves, 41, No. 1, pp 1-140 (2020) related to the development of gyro-devices (Tables 2-34). Emphasis is on high-power gyrotron oscillators for long-pulse or continuous wave (CW) operation and pulsed gyrotrons for any applications.
Book Synopsis Wireless Terahertz Communications: Optoelectronic Devices and Signal Processing by : Harter, Tobias
Download or read book Wireless Terahertz Communications: Optoelectronic Devices and Signal Processing written by Harter, Tobias and published by KIT Scientific Publishing. This book was released on 2021-06-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel THz device concepts and signal processing schemes are introduced and experimentally confirmed. Record-high data rates are achieved with a simple envelope detector at the receiver. Moreover, a THz communication system using an optoelectronic receiver and a photonic local oscillator is shown for the first time, and a new class of devices for THz transmitters and receivers is investigated which enables a monolithic co-integration of THz components with advanced silicon photonic circuits.
Author :National Academies of Sciences Engineering and Medicine Publisher : ISBN 13 :9780309685382 Total Pages : pages Book Rating :4.6/5 (853 download)
Book Synopsis Bringing Fusion to the U.S. Grid by : National Academies of Sciences Engineering and Medicine
Download or read book Bringing Fusion to the U.S. Grid written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-11-17 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion energy offers the prospect of addressing the nation's energy needs and contributing to the transition to a low-carbon emission electrical generation infrastructure. Technology and research results from U.S. investments in the major fusion burning plasma experiment known as ITER, coupled with a strong foundation of research funded by the Department of Energy (DOE), position the United States to begin planning for its first fusion pilot plant. Strong interest from the private sector is an additional motivating factor, as the process of decarbonizing and modernizing the nation's electric infrastructure accelerates and companies seek to lead the way. At the request of DOE, Bringing Fusion to the U.S. Grid builds upon the work of the 2019 report Final Report of the Committee on a Strategic Plan for U.S. Burning Plasma Research to identify the key goals and innovations - independent of confinement concept - that are needed to support the development of a U.S. fusion pilot plant that can serve as a model for producing electricity at the lowest possible capital cost.
Book Synopsis Superconducting Accelerator Magnets by : K.-H. Mess
Download or read book Superconducting Accelerator Magnets written by K.-H. Mess and published by World Scientific. This book was released on 1996 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.
Download or read book Fusion Neutronics written by Yican Wu and published by Springer. This book was released on 2017-08-16 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive introduction to fusion neutronics, covering all key topics from the fundamental theories and methodologies, as well as a wide range of fusion system designs and experiments. It is the first-ever book focusing on the subject of fusion neutronics research. Compared with other nuclear devices such as fission reactors and accelerators, fusion systems are normally characterized by their complex geometry and nuclear physics, which entail new challenges for neutronics such as complicated modeling, deep penetration, low simulation efficiency, multi-physics coupling, etc. The book focuses on the neutronic characteristics of fusion systems and introduces a series of theories and methodologies that were developed to address the challenges of fusion neutronics. Further, it introduces readers to the unique principles and procedures of neutronics design, experimental methodologies and methodologies for fusion systems. The book not only highlights the latest advances and trends in the field, but also draws on the experiences and skills collected in the author’s more than 40 years of research. To make it more accessible and enhance its practical value, various representative examples are included to illustrate the application and efficiency of the methods, designs and experimental techniques discussed.
Author :Machavaram V. Kartikeyan Publisher :Springer Science & Business Media ISBN 13 :3662076373 Total Pages :234 pages Book Rating :4.6/5 (62 download)
Book Synopsis Gyrotrons by : Machavaram V. Kartikeyan
Download or read book Gyrotrons written by Machavaram V. Kartikeyan and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on the author's wide experience, this book gives a comprehensive review of the state of the art in gyrotron technology, covering the theory, design and applications. The book includes an extensive references list which provides an excellent guide to the related literature.
Book Synopsis Safe Handling of Tritium by : International Atomic Energy Agency
Download or read book Safe Handling of Tritium written by International Atomic Energy Agency and published by . This book was released on 1991 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication contains information on the dosimetry and monitoring of tritium, the use of protective clothing for work with tritium, safe practices in tritium handling laboratories and details of tritium compatible materials. The information has been compiled from experience in the various applications of tritium and should represent valuable source material to all users of tritium, including those involved in fusion R&D.
Download or read book Complex Plasmas written by Michael Bonitz and published by Springer Science & Business Media. This book was released on 2014-04-09 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with an introduction to the physics of complex plasmas, a discussion of the specific scientific and technical challenges they present and an overview of their potential technological applications. Complex plasmas differ from conventional high-temperature plasmas in several ways: they may contain additional species, including nano meter- to micrometer-sized particles, negative ions, molecules and radicals and they may exhibit strong correlations or quantum effects. This book introduces the classical and quantum mechanical approaches used to describe and simulate complex plasmas. It also covers some key experimental techniques used in the analysis of these plasmas, including calorimetric probe methods, IR absorption techniques and X-ray absorption spectroscopy. The final part of the book reviews the emerging applications of microcavity and microchannel plasmas, the synthesis and assembly of nanomaterials through plasma electrochemistry, the large-scale generation of ozone using microplasmas and novel applications of atmospheric-pressure non-thermal plasmas in dentistry. Going beyond the scope of traditional plasma texts, the presentation is very well suited for senior undergraduate, graduate students and postdoctoral researchers specializing in plasma physics.
Book Synopsis Tokamak Start-Up: Problems and Scenarios Related to the Transient Phases of a Thermonuclear Fusion Reactor (Ettor Majorana International Science Series) by : Heinz Knoepfel
Download or read book Tokamak Start-Up: Problems and Scenarios Related to the Transient Phases of a Thermonuclear Fusion Reactor (Ettor Majorana International Science Series) written by Heinz Knoepfel and published by Springer. This book was released on 2013-12-19 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the Course on "Tokamak Startup - Problems and Scenarios Related to the Transient Phases of a Thermonuclear Fusion Reactor" which was held in Erice, July 14-20, 1985. The fact that the critical startup and transient phases of a tokamak reactor are now the specific subject of a comprehensive international gathering of fusion specialists seems indicative of the substantial pro gress made in recent years towards attaining controlled ignition of a nuclear fusion fuel, i.e. towards demonstrating the scientific feasibili ty of controlled thermonuclear fusion. In fact, the steady-state burning phase has attracted so far most of the attention of fusion physicists and engineers, as it is conceptually more rewarding, and theoretically easier to handle. However, as for many large engineering systems, - nuclear fis- ... ':1' " . 10 ' ... Entrance to San Rocco's lecturing hall v sion power plants, or aerospace crafts, for example - the major issues of design and operation lie often in the startup, shutdown and power tran sieQt phases, rather than at the full load, or at cruising regimes. In ehoosing the contributions to this 7th Course of Prof. B.
Book Synopsis Industrial Plasma Engineering by : J Reece Roth
Download or read book Industrial Plasma Engineering written by J Reece Roth and published by CRC Press. This book was released on 1995-01-01 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide the necessary theoretical background and a description of plasma-related devices and processes that are used industrially for physicists and engineers. It is a self-contained introduction to the principles of plasma engineering with comprehensive references. This volume also includes the terminology, jargon and acronyms used in the field of industrial plasma engineering - indexed when they first appear in the text - along with their definitions and a discussion of their meaning. It is aimed at assisting the student in learning key terminology and concepts, and providing the in-service engineer or scientist with a technical glossary. An extensive index and appendices enhance the value of this book as a key reference source. These incorporate a list of the nomenclature used in mathematical expressions in the text, physical constants, and often-used plasma formulae. SI units are used throughout. Intended for students from all engineering and physical science disciplines, and as a reference source by in-service engineers. Coverage: * basic information on plasma physics and the physical processes important in industrial plasmas * sources of ion and electron beams and ionizing radiation used in industrial applications * physics and technology of DC and RF electrical discharges.
Book Synopsis Vacuum Electronics by : Joseph A. Eichmeier
Download or read book Vacuum Electronics written by Joseph A. Eichmeier and published by Springer Science & Business Media. This book was released on 2008-03-04 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nineteen experts from the electronics industry, research institutes and universities have joined forces to prepare this book. It does nothing less than provide a complete overview of the electrophysical fundamentals, the present state of the art and applications, as well as the future prospects of microwave tubes and systems. The book does the same for optoelectronics vacuum devices, electron and ion beam devices, light and X-ray emitters, particle accelerators and vacuum interrupters.
