Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Aircraft Configurations Developing High Lift Drag Ratios At High Supersonic Speeds
Download Aircraft Configurations Developing High Lift Drag Ratios At High Supersonic Speeds full books in PDF, epub, and Kindle. Read online Aircraft Configurations Developing High Lift Drag Ratios At High Supersonic Speeds ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Aircraft Configurations Developing High Lift-drag Ratios at High Supersonic Speeds by : A. J. Eggers (Jr.)
Download or read book Aircraft Configurations Developing High Lift-drag Ratios at High Supersonic Speeds written by A. J. Eggers (Jr.) and published by . This book was released on 1956 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: The problem of designing an aircraft which will develop high lift-drag ratios in flight at high supersonic speeds is attacked using the elementary principle that the components of the aircraft should be individually and collectively arranged to impart the maximum downward and the minimum forward momentum to the surrounding air. This principle in conjunction with other practical considerations of hypersonic flight leads to the study of configurations for which the body is situated entirely below the wing; that is, flat-top wing-body combinations. Theory indicates that sensibly complete aircraft of this type can be designed to develop lift-drag ratios well in excess of 6.
Book Synopsis Aircraft Configurations Developing High Lift-drag Ratios at High Supersonic Speeds by : Ames Research Center
Download or read book Aircraft Configurations Developing High Lift-drag Ratios at High Supersonic Speeds written by Ames Research Center and published by Hassell Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Configurations is a comprehensive guide to the design and testing of supersonic aircraft. Based on research conducted at the Ames Research Center, it provides valuable insights into the aerodynamics of high-speed flight and the challenges of designing aircraft that can operate at these speeds. This book is an essential resource for anyone interested in the science of aviation. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Book Synopsis Aircraft Configurations Developed High Lift-drag Ratios at High Supersonic Speeds by : A.J. Jr Eggers
Download or read book Aircraft Configurations Developed High Lift-drag Ratios at High Supersonic Speeds written by A.J. Jr Eggers and published by . This book was released on 1956 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis A Supersonic Area Rule and an Application to the Design of a Wing-body Combination with High Lift-drag Ratios by : Richard T. Whitcomb
Download or read book A Supersonic Area Rule and an Application to the Design of a Wing-body Combination with High Lift-drag Ratios written by Richard T. Whitcomb and published by . This book was released on 1960 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: As an extension of the transonic area rule, a concept for interrelating the wave drags of wing-body combinations at moderate supersonic speeds with axial developments of cross-sectional area has been derived. The wave drag of a combination at a given supersonic speed is related to a number of developments of cross-sectional areas as intersected by Mach planes. On the basis of this concept and other design procedures, a structurally feasible, swept-wing--indented-body combination has been designed to have relatively high maximum lift-drag ratios over a range of transonic and moderate supersonic Mach numbers. The wing of the combination has been designed to have reduced drag associated with lift and, when used with an indented body, to have low zero-lift wave drag. Experimental results have been obtained for this configuration at Mach numbers from 0.80 to 2.01. Maximum lift-drag ratios of approximately 14 and 9 were measured at Mach numbers of 1.15 and 1.41, respectively.
Book Synopsis Factors Affecting the Maximum Lift-drag Ratio at High Supersonic Speeds by : Charles H. McLellan
Download or read book Factors Affecting the Maximum Lift-drag Ratio at High Supersonic Speeds written by Charles H. McLellan and published by . This book was released on 1956 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the factors affecting the maximum lift-drag ratio has been conducted in an effort to determine how to obtain high aerodynamic values at high supersonic Mach numbers.
Book Synopsis Aerodynamic Performance and Static Stability at Mach Number 3.3 of an Aircraft Configuration Employing Three Triangular Wing Panels and a Body Equal Length by : Carlton S. James
Download or read book Aerodynamic Performance and Static Stability at Mach Number 3.3 of an Aircraft Configuration Employing Three Triangular Wing Panels and a Body Equal Length written by Carlton S. James and published by . This book was released on 1960 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: An aircraft configuration, previously conceived as a means to achieve favorable aerodynamic stability characteristics., high lift-drag ratio, and low heating rates at high supersonic speeds., was modified in an attempt to increase further the lift-drag ratio without adversely affecting the other desirable characteristics. The original configuration consisted of three identical triangular wing panels symmetrically disposed about an ogive-cylinder body equal in length to the root chord of the panels. This configuration was modified by altering the angular disposition of the wing panels, by reducing the area of the panel forming the vertical fin, and by reshaping the body to produce interference lift. Six-component force and moment tests of the modified configuration at combined angles of attack and sideslip were made at a Mach number of 3.3 and a Reynolds number of 5.46 million. A maximum lift-drag ratio of 6.65 (excluding base drag) was measured at a lift coefficient of 0.100 and an angle of attack of 3.60. The lift-drag ratio remained greater than 3 up to lift coefficient of 0.35. Performance estimates, which predicted a maximum lift-drag ratio for the modified configuration 27 percent greater than that of the original configuration, agreed well with experiment. The modified configuration exhibited favorable static stability characteristics within the test range. Longitudinal and directional centers of pressure were slightly aft of the respective centroids of projected plan-form and side area.
Book Synopsis Supersonic Aerodynamic Characteristics of a Low-Drag Aircraft Configuration Having an Arrow Wing of Aspect Ratio 1.86 and a Body of Fineness Ratio 20 by :
Download or read book Supersonic Aerodynamic Characteristics of a Low-Drag Aircraft Configuration Having an Arrow Wing of Aspect Ratio 1.86 and a Body of Fineness Ratio 20 written by and published by . This book was released on 1960 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: A free-flight rocket-propelled-model investigation was conducted at Mach numbers of 1.2 to 1.9 to determine the longitudinal and lateral aero-dynamic characteristics of a low-drag aircraft configuration. The model consisted of an aspect-ratio -1.86 arrow wing with 67.5 deg. leading-edge sweep and NACA 65A004 airfoil section and a triangular vertical tail with 60 deg. sweep and NACA 65A003 section in combination with a body of fineness ratio 20. Aerodynamic data in pitch, yaw, and roll were obtained from transient motions induced by small pulse rockets firing at intervals in the pitch and yaw directions. From the results of this brief aerodynamic investigation, it is observed that very slender body shapes can provide increased volumetric capacity with little or no increase in zero-lift drag and that body fineness ratios of the order of 20 should be considered in the design of long-range supersonic aircraft. The zero-lift drag and the drag-due-to-lift parameter of the test configuration varied linearly with Mach number. The maximum lift-drag ratio was 7.0 at a Mach number of 1.25 and decreased slightly to a value of 6.6 at a Mach number of 1.81. The optimum lift coefficient, normal-force-curve slope, lateral-force-curve slope, static stability in pitch and yaw, time to damp to one-half amplitude in pitch and yaw, the sum of the rotary damping derivatives in pitch and also in yaw, and the static rolling derivatives all decreased with an increase in Mach number. Values of certain rolling derivatives were obtained by application of the least-squares method to the differential equation of rolling motion. A comparison of the experimental and calculated total rolling-moment-coefficient variation during transient oscillations of the model indicated good agreement when the damping-in-roll contribution was included with the static rolling-moment terms.
Book Synopsis A Supersonic Area Rule and an Application to the Design of a Wing-body Combination with High Lift-drag Ratios by : Richard T. Whitcomb
Download or read book A Supersonic Area Rule and an Application to the Design of a Wing-body Combination with High Lift-drag Ratios written by Richard T. Whitcomb and published by . This book was released on 1960 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an extension of the transonic area rule, a concept for interrelating the wave drags of wing-body combinations at moderate supersonic speeds with axial developments of cross-sectional area has been derived. The wave drag of a combination at a given supersonic speed is related to a number of developments of cross-sectional areas as intersected by Mach planes. On the basis of this concept and other design procedures, a structurally feasible, swept-wing--indented-body combination has been designed to have relatively high maximum lift-drag ratios over a range of transonic and moderate supersonic Mach numbers. The wing of the combination has been designed to have reduced drag associated with lift and, when used with an indented body, to have low zero-lift wave drag. Experimental results have been obtained for this configuration at Mach numbers from 0.80 to 2.01. Maximum lift-drag ratios of approximately 14 and 9 were measured at Mach numbers of 1.15 and 1.41, respectively.
Book Synopsis Trim Drag at Supersonic Speeds of Various Delta-planform Configurations by : M. E. Graham
Download or read book Trim Drag at Supersonic Speeds of Various Delta-planform Configurations written by M. E. Graham and published by . This book was released on 1960 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Estimated Lift-drag Ratios at Supersonic Speed by : Robert T. Jones
Download or read book Estimated Lift-drag Ratios at Supersonic Speed written by Robert T. Jones and published by . This book was released on 1947 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in supersonic flow theory are applied to obtain estimates of the lift-drag ratios that may be achieved by aircraft employing swept-back wings. Lift-drag ratios greaterr than 10 to 1 can be maintained up to a Mach number of 1.4 bythe use of large angles of sweep and high aspect ratios. As the speed increases in the supersonic range the attainable lift-drag ratios decrease and the gain due to sweepback also appears to diminish. An efficient configuration for M = 1.4 would require about 60 degrees sweepback, an aspect ratio of 4 and a wing loading of one-third the atmospheric pressure. For a wing loading of 50 pounds per square foot the cruising altitude would be 60,000 feet and the indicated airspeed 290 miles per hour.
Book Synopsis Flight Investigation at High-subsonic, Transonic, and Supersonic Speeds to Determine Zero-lift Drag of Fin-stabilized Bodies of Revolution Having Fineness Ratios of 12.5, 8.91, and 6.04 and Varying Positions of Maximum Diameter by : Roger G. Hart
Download or read book Flight Investigation at High-subsonic, Transonic, and Supersonic Speeds to Determine Zero-lift Drag of Fin-stabilized Bodies of Revolution Having Fineness Ratios of 12.5, 8.91, and 6.04 and Varying Positions of Maximum Diameter written by Roger G. Hart and published by . This book was released on 1949 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by and published by . This book was released on 1973 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerodynamics of Space Vehicles written by and published by . This book was released on 1963 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Proceedings of the NASA-University Conference on the Science and Technology of Space Exploration by :
Download or read book Proceedings of the NASA-University Conference on the Science and Technology of Space Exploration written by and published by . This book was released on 1962 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Chinese boy's greatest wish is to be an artist but he is too poor to buy a good brush until a wizard appears and gives him one with magic powers.
Book Synopsis Proceedings of the NASA-University Conference on the Science and Technology of Space Exploration, Chicago, Illinois, November 1-3, 1962 by : United States. National Aeronautics and Space Administration
Download or read book Proceedings of the NASA-University Conference on the Science and Technology of Space Exploration, Chicago, Illinois, November 1-3, 1962 written by United States. National Aeronautics and Space Administration and published by . This book was released on 1962 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis NASA's Contributions to Aeronautics: Aerodynamics, structures, propulsion, controls by :
Download or read book NASA's Contributions to Aeronautics: Aerodynamics, structures, propulsion, controls written by and published by . This book was released on 2010 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-volume collection of case studies on aspects of NACA-NASA research by noted engineers, airmen, historians, museum curators, journalists, and independent scholars. Explores various aspects of how NACA-NASA research took aeronautics from the subsonic to the hypersonic era.-publisher description.
Book Synopsis NASA's Contributions to Aeronautics by :
Download or read book NASA's Contributions to Aeronautics written by and published by . This book was released on 2010 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
