Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Vehicle Dynamics Estimation Using Kalman Filtering
Download Vehicle Dynamics Estimation Using Kalman Filtering full books in PDF, epub, and Kindle. Read online Vehicle Dynamics Estimation Using Kalman Filtering ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Vehicle Dynamics Estimation using Kalman Filtering by : Moustapha Doumiati
Download or read book Vehicle Dynamics Estimation using Kalman Filtering written by Moustapha Doumiati and published by John Wiley & Sons. This book was released on 2012-12-14 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle dynamics and stability have been of considerable interest for a number of years. The obvious dilemma is that people naturally desire to drive faster and faster yet expect their vehicles to be “infinitely” stable and safe during all normal and emergency maneuvers. For the most part, people pay little attention to the limited handling potential of their vehicles until some unusual behavior is observed that often results in accidents and even fatalities. This book presents several model-based estimation methods which involve information from current potential-integrable sensors. Improving vehicle control and stabilization is possible when vehicle dynamic variables are known. The fundamental problem is that some essential variables related to tire/road friction are difficult to measure because of technical and economical reasons. Therefore, these data must be estimated. It is against this background, that this book’s objective is to develop estimators in order to estimate the vehicle’s load transfer, the sideslip angle, and the vertical and lateral tire/road forces using a roll model. The proposed estimation processes are based on the state observer (Kalman filtering) theory and the dynamic response of a vehicle instrumented with standard sensors. These estimators are able to work in real time in normal and critical driving situations. Performances are tested using an experimental car in real driving situations. This is exactly the focus of this book, providing students, technicians and engineers from the automobile field with a theoretical basis and some practical algorithms useful for estimating vehicle dynamics in real-time during vehicle motion.
Book Synopsis Kalman Filters by : Ginalber Luiz Serra
Download or read book Kalman Filters written by Ginalber Luiz Serra and published by BoD – Books on Demand. This book was released on 2018-02-21 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent issues on theory and practice of Kalman filters, with a comprehensive treatment of a selected number of concepts, techniques, and advanced applications. From an interdisciplinary point of view, the contents from each chapter bring together an international scientific community to discuss the state of the art on Kalman filter-based methodologies for adaptive/distributed filtering, optimal estimation, dynamic prediction, nonstationarity, robot navigation, global navigation satellite systems, moving object tracking, optical communication systems, and active power filters, among others. The theoretical and methodological foundations combined with extensive experimental explanation make this book a reference suitable for students, practicing engineers, and researchers in sciences and engineering.
Book Synopsis Unscented Kalman Filter for State and Parameter Estimation in Vehicle Dynamics by : Mark Wielitzka
Download or read book Unscented Kalman Filter for State and Parameter Estimation in Vehicle Dynamics written by Mark Wielitzka and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive research and development passed through a vast evolution during past decades. Many passive and active driver assistance systems were developed, increasing the passengers' safety and comfort. This ongoing process is a main focus in current research and offers great potential for further systems, especially focusing on the task of autonomous and cooperative driving in the future. For that reason, information about the current stability in terms of dynamic behavior and vehicle environment are necessary for the systems to perform properly. Thus, model-based online state and parameter estimation have become important throughout the last years using a detailed vehicle model and standard sensors, gathering this information. In this chapter, state and parameter estimation in vehicle dynamics utilizing the unscented Kalman filter is presented. The estimation runs in real time based on a detailed vehicle model and standard measurements taken within the car. The results are validated using a Volkswagen Golf GTE Plug-In Hybrid for various dynamic test maneuvers and a Genesys Automotive Dynamic Motion Analyzer (ADMA) measurement unit for high-precision measurements of the vehicle's states. Online parameter estimation is shown for friction coefficient estimation performing maneuvers on different road surfaces.
Book Synopsis Introduction and Implementations of the Kalman Filter by : Felix Govaers
Download or read book Introduction and Implementations of the Kalman Filter written by Felix Govaers and published by BoD – Books on Demand. This book was released on 2019-05-22 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensor data fusion is the process of combining error-prone, heterogeneous, incomplete, and ambiguous data to gather a higher level of situational awareness. In principle, all living creatures are fusing information from their complementary senses to coordinate their actions and to detect and localize danger. In sensor data fusion, this process is transferred to electronic systems, which rely on some "awareness" of what is happening in certain areas of interest. By means of probability theory and statistics, it is possible to model the relationship between the state space and the sensor data. The number of ingredients of the resulting Kalman filter is limited, but its applications are not.
Book Synopsis Optimal State Estimation by : Dan Simon
Download or read book Optimal State Estimation written by Dan Simon and published by John Wiley & Sons. This book was released on 2006-06-19 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: A bottom-up approach that enables readers to master and apply the latest techniques in state estimation This book offers the best mathematical approaches to estimating the state of a general system. The author presents state estimation theory clearly and rigorously, providing the right amount of advanced material, recent research results, and references to enable the reader to apply state estimation techniques confidently across a variety of fields in science and engineering. While there are other textbooks that treat state estimation, this one offers special features and a unique perspective and pedagogical approach that speed learning: * Straightforward, bottom-up approach begins with basic concepts and then builds step by step to more advanced topics for a clear understanding of state estimation * Simple examples and problems that require only paper and pen to solve lead to an intuitive understanding of how theory works in practice * MATLAB(r)-based source code that corresponds to examples in the book, available on the author's Web site, enables readers to recreate results and experiment with other simulation setups and parameters Armed with a solid foundation in the basics, readers are presented with a careful treatment of advanced topics, including unscented filtering, high order nonlinear filtering, particle filtering, constrained state estimation, reduced order filtering, robust Kalman filtering, and mixed Kalman/H? filtering. Problems at the end of each chapter include both written exercises and computer exercises. Written exercises focus on improving the reader's understanding of theory and key concepts, whereas computer exercises help readers apply theory to problems similar to ones they are likely to encounter in industry. With its expert blend of theory and practice, coupled with its presentation of recent research results, Optimal State Estimation is strongly recommended for undergraduate and graduate-level courses in optimal control and state estimation theory. It also serves as a reference for engineers and science professionals across a wide array of industries.
Book Synopsis Vehicle Dynamics State Estimation for Vehicle Operation at the Limit of Handling by : Victor Vidal Muñoz
Download or read book Vehicle Dynamics State Estimation for Vehicle Operation at the Limit of Handling written by Victor Vidal Muñoz and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time estimation of the dynamic states of a vehicle, vehicle parameters, tyre-road friction and road angle estimation have the unquestionable ability to enhance the performance of vehicle control and safety systems. The aim of this project is to, firstly, go over the literature on vehicle dynamics estimation in order to have a comprehensive overview of the state-of-art. Secondly, an unscented Kalman filter (UKF) is chosen and implemented as a method to estimate the total vehicle velocity, the sideslip angle and the tyre-road friction potential. This sensor function technique is developed to work with a current car onboard sensor suite (accelerometer, gyroscope, steering wheel angle sensor, and wheel speed sensors). Along with the filter, a fourwheel dynamics vehicle model and the Magic Formula for the tyres are established. Finally, the filter is tested using simulated manoeuvres to check its accuracy and robustness.
Book Synopsis The Science of Vehicle Dynamics by : Massimo Guiggiani
Download or read book The Science of Vehicle Dynamics written by Massimo Guiggiani and published by Springer. This book was released on 2018-05-05 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers handling and performance of both road and race cars. Mathematical models of vehicles are developed always paying attention to state the relevant assumptions and to provide explanations for each step. This innovative approach provides a deep, yet simple, analysis of the dynamics of vehicles. The reader will soon achieve a clear understanding of the subject, which will be of great help both in dealing with the challenges of designing and testing new vehicles and in tackling new research topics. The book deals with several relevant topics in vehicle dynamics that are not discussed elsewhere and this new edition includes thoroughly revised chapters, with new developments, and many worked exercises. Praise for the previous edition: Great book! It has changed drastically our approach on many topics. We are now using part of its theory on a daily basis to constantly improve ride and handling performances. --- Antonino Pizzuto, Head of Chassis Development Group at Hyundai Motor Europe Technical Center Astonishingly good! Everything is described in a very compelling and complete way. Some parts use a different approach than other books. --- Andrea Quintarelli, Automotive Engineer
Book Synopsis Proceedings of the FISITA 2012 World Automotive Congress by : SAE-China
Download or read book Proceedings of the FISITA 2012 World Automotive Congress written by SAE-China and published by Springer Science & Business Media. This book was released on 2012-10-28 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the FISITA 2012 World Automotive Congress are selected from nearly 2,000 papers submitted to the 34th FISITA World Automotive Congress, which is held by Society of Automotive Engineers of China (SAE-China) and the International Federation of Automotive Engineering Societies (FISITA). This proceedings focus on solutions for sustainable mobility in all areas of passenger car, truck and bus transportation. Volume 10: Chassis Systems and Integration Technology focuses on: •Chassis structure and Design •Chassis Controls and Integration •Tire and wheel Design/ Tire Properties and Modeling •Subjective and Objective Evaluation on Dynamic Performance •Dynamics Modeling, Simulation and Experimental Validation Above all researchers, professional engineers and graduates in fields of automotive engineering, mechanical engineering and electronic engineering will benefit from this book. SAE-China is a national academic organization composed of enterprises and professionals who focus on research, design and education in the fields of automotive and related industries. FISITA is the umbrella organization for the national automotive societies in 37 countries around the world. It was founded in Paris in 1948 with the purpose of bringing engineers from around the world together in a spirit of cooperation to share ideas and advance the technological development of the automobile.
Book Synopsis Control Applications of Vehicle Dynamics by : Jingsheng Yu
Download or read book Control Applications of Vehicle Dynamics written by Jingsheng Yu and published by CRC Press. This book was released on 2021-12-20 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential knowledge of car vehicle dynamics and control theory with NI LabVIEW software product application, resulting in a practical yet highly technical guide for designing advanced vehicle dynamics and vehicle system controllers. Presenting a clear overview of fundamental vehicle dynamics and vehicle system mathematical models, the book covers linear and non-linear design of model based controls such as wheel slip control, vehicle speed control, path following control, vehicle stability and rollover control, stabilization of vehicle-trailer system. Specific applications to autonomous vehicles are described among the methods. It details the practical applications of Kalman-Bucy filtering and the observer design for sensor signal estimation, alongside lateral vehicle dynamics and vehicle rollover dynamics. The book also discusses high level controllers, alongside a clear explanation of basic control principles for regenerative braking in both electric and hybrid vehicles, and wheel torque vectoring systems. Concrete LabVIEW simulation examples of how the models and controls are used in representative applications, along with software algorithms and LabVIEW block diagrams are illustrated. It will be of interest to engineering students, automotive engineering students and automotive engineers and researchers.
Book Synopsis Advanced Vehicle Control by : Johannes Edelmann
Download or read book Advanced Vehicle Control written by Johannes Edelmann and published by CRC Press. This book was released on 2016-12-19 with total page 1676 pages. Available in PDF, EPUB and Kindle. Book excerpt: The AVEC symposium is a leading international conference in the fields of vehicle dynamics and advanced vehicle control, bringing together scientists and engineers from academia and automotive industry. The first symposium was held in 1992 in Yokohama, Japan. Since then, biennial AVEC symposia have been established internationally and have considerably contributed to the progress of technology in automotive research and development. In 2016 the 13th International Symposium on Advanced Vehicle Control (AVEC’16) was held in Munich, Germany, from 13th to 16th of September 2016. The symposium was hosted by the Munich University of Applied Sciences. AVEC’16 puts a special focus on automatic driving, autonomous driving functions and driver assist systems, integrated control of interacting control systems, controlled suspension systems, active wheel torque distribution, and vehicle state and parameter estimation. 132 papers were presented at the symposium and are published in these proceedings as full paper contributions. The papers review the latest research developments and practical applications in highly relevant areas of vehicle control, and may serve as a reference for researchers and engineers.
Book Synopsis Kalman Filtering by : Mohinder S. Grewal
Download or read book Kalman Filtering written by Mohinder S. Grewal and published by John Wiley & Sons. This book was released on 2015-02-02 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive textbook and professional reference on Kalman Filtering – fully updated, revised, and expanded This book contains the latest developments in the implementation and application of Kalman filtering. Authors Grewal and Andrews draw upon their decades of experience to offer an in-depth examination of the subtleties, common pitfalls, and limitations of estimation theory as it applies to real-world situations. They present many illustrative examples including adaptations for nonlinear filtering, global navigation satellite systems, the error modeling of gyros and accelerometers, inertial navigation systems, and freeway traffic control. Kalman Filtering: Theory and Practice Using MATLAB, Fourth Edition is an ideal textbook in advanced undergraduate and beginning graduate courses in stochastic processes and Kalman filtering. It is also appropriate for self-instruction or review by practicing engineers and scientists who want to learn more about this important topic.
Book Synopsis Estimation of the Longitudinal and Lateral Velocities of a Vehicle Using Extended Kalman Filters by : Juan Camilo Alvarez
Download or read book Estimation of the Longitudinal and Lateral Velocities of a Vehicle Using Extended Kalman Filters written by Juan Camilo Alvarez and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle motion and tire forces have been estimated using extended Kalman filters for many years. The use of extended Kalman filters is primarily motivated by the simultaneous presence of nonlinear dynamics and sensor noise. Two versions of extended Kalman filters are employed in this thesis: one using a deterministic tire-force model and the other using a stochastic tire-force model. Previous literature has focused on linear stochastic tire-force models and on linear deterministic tire-force models. However, it is well known that there exists a nonlinear relationship between slip variables and tire-force variables. For this reason, it is suitable to use a nonlinear deterministic tire-force model for the extended Kalman filter, and this is the novel aspect at this work. The objective of this research is to show the improvement of the extended Kalman filter using a nonlinear deterministic tire-force model in comparison to linear stochastic tire-force model. The simulation model is a seven degree-of-freedom bicycle model that includes vertical suspension dynamics but neglects the roll motion. A comparison between the linear stochastic tire-force model and the nonlinear deterministic tire-force model confirms the expected results. Simulation studies are performed on some illustrative examples obtaining good tracking performance.
Book Synopsis The Dynamics of Vehicles on Roads and on Tracks Supplement to Vehicle System Dynamics by : Masato Abe
Download or read book The Dynamics of Vehicles on Roads and on Tracks Supplement to Vehicle System Dynamics written by Masato Abe and published by CRC Press. This book was released on 2005-02-10 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th Symposium of the International Association for Vehicle System Dynamics was held at Kanagawa Institute of Technology, Atsugi, Kanagawa, Japan. The symposium was hosted by KAIT as one of the memorial events of the 40th anniversary of KAIT. Though overwhelming numbers of high quality papers were applied in response to the call for papers for the presentation at the symposium, the Scientific Committee accepted 89 papers for the oral presentation and 38 for the poster presentation. Finally, 82 papers were presented at the oral sessions and 29 papers at the poster sessions in the symposium. There were five States-of-the-Arts papers presented at the plenary sessions in the symposium.
Book Synopsis Evolutionary and Deterministic Methods for Design Optimization and Control With Applications to Industrial and Societal Problems by : Esther Andrés-Pérez
Download or read book Evolutionary and Deterministic Methods for Design Optimization and Control With Applications to Industrial and Societal Problems written by Esther Andrés-Pérez and published by Springer. This book was released on 2018-09-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty-five selected papers presented at the International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems (EUROGEN 2017). This was one of the Thematic Conferences of the European Community on Computational Methods in Applied Sciences (ECCOMAS). Topics treated in the various chapters reflect the state of the art in theoretical and numerical methods and tools for optimization, and engineering design and societal applications. The volume focuses particularly on intelligent systems for multidisciplinary design optimization (mdo) problems based on multi-hybridized software, adjoint-based and one-shot methods, uncertainty quantification and optimization, multidisciplinary design optimization, applications of game theory to industrial optimization problems, applications in structural and civil engineering optimum design and surrogate models based optimization methods in aerodynamic design.
Book Synopsis Informatics in Control, Automation and Robotics by : Oleg Gusikhin
Download or read book Informatics in Control, Automation and Robotics written by Oleg Gusikhin and published by Springer. This book was released on 2019-04-18 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses the latest endeavours relating researches and developments conducted in fields of Control, Robotics and Automation. Through more than twenty revised and extended articles, the present book aims to provide the most up-to-date state-of-art of the aforementioned fields allowing researcher, PhD students and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in a same volume a factual and well-balanced prospect of nowadays research in those topics. A special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.
Book Synopsis State Estimation and Control for Low-cost Unmanned Aerial Vehicles by : Chingiz Hajiyev
Download or read book State Estimation and Control for Low-cost Unmanned Aerial Vehicles written by Chingiz Hajiyev and published by Springer. This book was released on 2015-06-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses state estimation and control procedures for a low-cost unmanned aerial vehicle (UAV). The authors consider the use of robust adaptive Kalman filter algorithms and demonstrate their advantages over the optimal Kalman filter in the context of the difficult and varied environments in which UAVs may be employed. Fault detection and isolation (FDI) and data fusion for UAV air-data systems are also investigated, and control algorithms, including the classical, optimal, and fuzzy controllers, are given for the UAV. The performance of different control methods is investigated and the results compared. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles covers all the important issues for designing a guidance, navigation and control (GNC) system of a low-cost UAV. It proposes significant new approaches that can be exploited by GNC system designers in the future and also reviews the current literature. The state estimation, control and FDI methods are illustrated by examples and MATLAB® simulations. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles will be of interest to both researchers in academia and professional engineers in the aerospace industry. Graduate students may also find it useful, and some sections are suitable for an undergraduate readership.
Book Synopsis Application of Adaptive Filtering Methods to Maneuvering Trajectory Estimation by :
Download or read book Application of Adaptive Filtering Methods to Maneuvering Trajectory Estimation written by and published by . This book was released on 1975 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this report is to examine several modifications of extended Kalman filters which can be used to estimate the position, velocity, and other key parameters associated with maneuvering re-entry vehicles. These filters will be described and discussed in terms of the fundamental problems of modeling accuracy, filter sophistication, and the real-time computational requirements. A nine-state, extended Kalman filter based upon the maneuvering vehicle dynamics is compared with several other candidate filters. These candidate filters include a simple filter based upon polynomial dynamics decoupled with respect to the coordinates and a more complex, fully coupled, seven-state, extended Kalman filter based upon a ballistic re-entry vehicle dynamics. Techniques which adaptively increase the process noise to compensate for modeling errors during the maneuvers are examined.
