Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Structural Analysis Of Point Defects In Solids
Download Structural Analysis Of Point Defects In Solids full books in PDF, epub, and Kindle. Read online Structural Analysis Of Point Defects In Solids ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Point Defects in Semiconductors and Insulators by : Johann-Martin Spaeth
Download or read book Point Defects in Semiconductors and Insulators written by Johann-Martin Spaeth and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precedent book with the title "Structural Analysis of Point Defects in Solids: An introduction to multiple magnetic resonance spectroscopy" ap peared about 10 years ago. Since then a very active development has oc curred both with respect to the experimental methods and the theoretical interpretation of the experimental results. It would therefore not have been sufficient to simply publish a second edition of the precedent book with cor rections and a few additions. Furthermore the application of the multiple magnetic resonance methods has more and more shifted towards materials science and represents one of the important methods of materials analysis. Multiple magnetic resonances are used less now for "fundamental" studies in solid state physics. Therefore a more "pedestrian" access to the meth ods is called for to help the materials scientist to use them or to appreciate results obtained by using these methods. We have kept the two introduc tory chapters on conventional electron paramagnetic resonance (EPR) of the precedent book which are the base for the multiple resonance methods. The chapter on optical detection of EPR (ODEPR) was supplemented by sections on the structural information one can get from "forbidden" transitions as well as on spatial correlations between defects in the so-called "cross relaxation spectroscopy". High-field ODEPR/ENDOR was also added. The chapter on stationary electron nuclear double resonance (ENDOR) was supplemented by the method of stochastic END OR developed a few years ago in Paderborn which is now also commercially available.
Book Synopsis Structural Analysis of Point Defects in Solids by : Johann-Martin Spaeth
Download or read book Structural Analysis of Point Defects in Solids written by Johann-Martin Spaeth and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strutural Analysis of Point Defects in Solids introduces the principles and techniques of modern electron paramagnetic resonance (EPR) spectroscopy essentialfor applications to the determination of microscopic defect structures. Investigations of the microscopic and electronic structure, and also correlations with the magnetic propertiesof solids, require various multiple magnetic resonance methods, such as ENDOR and optically detected EPR or ENDOR. This book discusses experimental, technological and theoretical aspects of these techniques comprehensively, from a practical viewpoint, with many illustrative examples taken from semiconductors and other solids. The nonspecialist is informed about the potential of the different methods, while the researcher faced with the task of determining defect structures isprovided with the necessary tools, together with much information on computer-aided methods of data analysis and the principles of modern spectrometer design.
Book Synopsis Structural Analysis of Point Defects in Solids by : Johann-Martin Spaeth
Download or read book Structural Analysis of Point Defects in Solids written by Johann-Martin Spaeth and published by . This book was released on 1992-11-05 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Point Defects in Solids by : James H. Crawford
Download or read book Point Defects in Solids written by James H. Crawford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 of Point Defects in Solids has as its major emphasis defects in ionic solids. Volume 2 now extends this emphasis to semiconductors. The first four chapters treat in some detail the creation, kinetic behavior, inter actions, and physical properties of both simple and composite defects in a variety of semiconducting systems. Also included, as in Vol. 1, are chapters on special topics, namely phonon-defect interactions and defects in organic crystals. Defect behavior in semiconductors has been a subject of considerable interest since the discovery some twenty-five years ago that fast neutron irradiation profoundly affected the electrical characteristics of germanium and silicon. Present-day interest has been stimulated by such semiconductor applications as solar cell power plants for space stations and satellites and semiconductor particle and y-ray detectors, since in both radiation damage can cause serious deterioration. Of even greater practical concern is the need to understand particle damage in order to capitalize upon the develop ing technique of ion implantation as a means of device fabrication. Although the periodic international conferences on radiation effects in semiconductors have served the valuable function of summarizing the extensive work being done in this field, these proceedings are much too detailed and lack the background discussion needed to make them useful to the novice.
Book Synopsis Point Defects in Solids by : James H. Crawford
Download or read book Point Defects in Solids written by James H. Crawford and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Defects in Solids by : Richard J. D. Tilley
Download or read book Defects in Solids written by Richard J. D. Tilley and published by John Wiley & Sons. This book was released on 2008-10-10 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough understanding of the chemistry and physics of defects, enabling the reader to manipulate them in the engineering of materials. Reinforces theoretical concepts by placing emphasis on real world processes and applications. Includes two kinds of end-of-chapter problems: multiple choice (to test knowledge of terms and principles) and more extensive exercises and calculations (to build skills and understanding). Supplementary material on crystallography and band structure are included in separate appendices.
Book Synopsis An Introduction to Composite Materials by : D. Hull
Download or read book An Introduction to Composite Materials written by D. Hull and published by Cambridge University Press. This book was released on 1996-08-13 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition has been greatly enlarged and updated to provide both scientists and engineers with a clear and comprehensive understanding of composite materials. In describing both theoretical and practical aspects of their production, properties and usage, the book crosses the borders of many disciplines. Topics covered include: fibres, matrices, laminates and interfaces; elastic deformation, stress and strain, strength, fatigue crack propagation and creep resistance; toughness and thermal properties; fatigue and deterioration under environmental conditions; fabrication and applications. Coverage has been increased to include polymeric, metallic and ceramic matrices and reinforcement in the form of long fibres, short fibres and particles. Designed primarily as a teaching text for final-year undergraduates in materials science and engineering, this book will also interest undergraduates and postgraduates in chemistry, physics, and mechanical engineering. In addition, it will be an excellent source book for academic and technological researchers on materials.
Book Synopsis Point Defects in Solids by : James H. Crawford
Download or read book Point Defects in Solids written by James H. Crawford and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crystal defects can no longer be thought of as a scientific curiosity, but must be considered an important aspect of solid-state science. This is largely because many of the more interesting properties of crystalline solids are disproportionately dominated by effects due to a tiny concentration of imperfections in an otherwise perfect lattice. The physics of such lattice defects is not only of significance in a great variety of applications, but is also interesting in its own right. Thus, an extensive science of point defects and dislocations has been constructed during the past two and a half decades. Stimulated by the technological and scientific interest in plasticity, there have appeared in recent years rather a large number of books dealing with dislocations; in the case of point defects, however, only very few broad and extensive treatments have been published. Thus, there are few compre hensive, tutorial sources for the scientist or engineer whose research ac tivities are affected by point defect phenomena, or who might wish to enter the field. It is partially to fill this need that the present treatise aims.
Book Synopsis Point Defects in Semiconductors I by : M. Lannoo
Download or read book Point Defects in Semiconductors I written by M. Lannoo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: From its early beginning before the war, the field of semiconductors has developped as a classical example where the standard approximations of 'band theory' can be safely used to study its interesting electronic properties. Thus in these covalent crystals, the electronic structure is only weakly coupled with the atomic vibrations; one-electron Bloch functions can be used and their energy bands can be accurately computed in the neighborhood of the energy gap between the valence and conduction bands; nand p doping can be obtained by introducing substitutional impurities which only introduce shallow donors and acceptors and can be studied by an effective-mass weak-scattering description. Yet, even at the beginning, it was known from luminescence studies that these simple concepts failed to describe the various 'deep levels' introduced near the middle of the energy gap by strong localized imperfections. These imperfections not only include some interstitial and many substitutional atoms, but also 'broken bonds' associated with surfaces and interfaces, dis location cores and 'vacancies', i.e., vacant iattice sites in the crystal. In all these cases, the electronic structure can be strongly correlated with the details of the atomic structure and the atomic motion. Because these 'deep levels' are strongly localised, electron-electron correlations can also playa significant role, and any weak perturbation treatment from the perfect crystal structure obviously fails. Thus, approximate 'strong coupling' techniques must often be used, in line' with a more chemical de scription of bonding.
Book Synopsis Defects and Their Structure in Nonmetallic Solids by : B. Henderson
Download or read book Defects and Their Structure in Nonmetallic Solids written by B. Henderson and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute of which this volume is the proceedings was held at the University of Exeter during 24 August to 6 September 1975. There were seventy participants of whom eighteen were lecturers and members of the advisory committee. All NATO countries except Holland, Iceland and Portugal were re presented. In addition a small number of participants came from non-NATO countries Japan, Ireland and Switzerland. An aim of the organising committee was to bring together scientists of wide interests and expertise in the defect structure of insulators and semiconductors. Thus major emphases in the pro gramme concerned the use of spectroscopy and microscopy in revealing the structure of point defects and their aggregates, line defects as well as planar and volume defects. The lectures revealed that in general little is known of the fate of the interstitial in most irradiated solids. Nor are the dynamic properties of defects under stood in sufficient detail that one can state how point defects cluster and eventually become macroscopic defects. Although this book faithfully reproduces the material covered by the invited speakers, it does not really follow the flow of the lectures. This is because it seemed advisable for each lecturer to provide a single self-contained and authoritative manuscript, rather than a series of short articles corresponding to the lectures.
Book Synopsis Defects and Defect Processes in Nonmetallic Solids by : W. Hayes
Download or read book Defects and Defect Processes in Nonmetallic Solids written by W. Hayes and published by Courier Corporation. This book was released on 2012-02-10 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensive survey covers defects in nonmetals, emphasizing point defects and point-defect processes. It encompasses electronic, vibrational, and optical properties of defective solids, plus dislocations and grain boundaries. 1985 edition.
Book Synopsis Point Defects in Solids by : James H. Crawford
Download or read book Point Defects in Solids written by James H. Crawford and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Point Defects in Semiconductors and Insulators by : Johann-Martin Spaeth
Download or read book Point Defects in Semiconductors and Insulators written by Johann-Martin Spaeth and published by Springer. This book was released on 2012-10-15 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The precedent book with the title "Structural Analysis of Point Defects in Solids: An introduction to multiple magnetic resonance spectroscopy" ap peared about 10 years ago. Since then a very active development has oc curred both with respect to the experimental methods and the theoretical interpretation of the experimental results. It would therefore not have been sufficient to simply publish a second edition of the precedent book with cor rections and a few additions. Furthermore the application of the multiple magnetic resonance methods has more and more shifted towards materials science and represents one of the important methods of materials analysis. Multiple magnetic resonances are used less now for "fundamental" studies in solid state physics. Therefore a more "pedestrian" access to the meth ods is called for to help the materials scientist to use them or to appreciate results obtained by using these methods. We have kept the two introduc tory chapters on conventional electron paramagnetic resonance (EPR) of the precedent book which are the base for the multiple resonance methods. The chapter on optical detection of EPR (ODEPR) was supplemented by sections on the structural information one can get from "forbidden" transitions as well as on spatial correlations between defects in the so-called "cross relaxation spectroscopy". High-field ODEPR/ENDOR was also added. The chapter on stationary electron nuclear double resonance (ENDOR) was supplemented by the method of stochastic END OR developed a few years ago in Paderborn which is now also commercially available.
Book Synopsis Point Defects and Diffusion by : C. P. Flynn
Download or read book Point Defects and Diffusion written by C. P. Flynn and published by . This book was released on 1972 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Defects and Disorder in Crystalline and Amorphous Solids by : Richard Catlow
Download or read book Defects and Disorder in Crystalline and Amorphous Solids written by Richard Catlow and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of defects and disorder in solids remains a central topic in solid state science. Developments in the field continue to be promoted by new experimental and theoretical techniques, while further impetus for the study of disorder in solids is provided by the growing range of applications of solid state materials in which disorder at the atomic level plays a crucial rOle. In this book we attempt to present a survey of fundamental and applied aspects of the field. We consider the basic aspects of defective crystalline and amorphous solids. We discuss recent studies of structural, electronic, transport, thermodynamic and spectroscopic properties of such materials. Experimental and theoretical methodologies are reviewed, and detailed consideration is given to materials such as fast ion conductors and amorphous semiconductors that are of importance in an applied context. Any survey of this large field is necessarily selective. We have chosen to emphasise insulating (especially oxidic) and semi-conducting materials. But many of the approaches and techniques we describe apply generally across the entire field of solid state science. This volume is based on a NATO ASI held at the Residencia Santa Teresa de Jesus, Madrid in September 1991. The Editor is grateful to the NATO Scientific Affairs Division for their sponsorship of this School. Thanks are also due to all who participated in and lectured at the school, but especially to the organising committee of A. V. Chadwick, G. N. Greaves, M. Grigorkiewicz, J. H. Harding and S. Kalbitzer. C. R. A.
Book Synopsis Modern Aspects of Solid State Chemistry by : C.N.R. Rao
Download or read book Modern Aspects of Solid State Chemistry written by C.N.R. Rao and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three natural streams of present-day chemistry are Structure, Dynamics and Synthesis and all these three elements are essential for the study of materials, particularly in the solid state. The solid state provides challenging opportunities for illustrating and applying principles of chemistry to systems of academic interest and technological importance. There are several practising solid state chemists in universities and research laboratories, but the subject has not yet become part of the formal training program in chemistry. Being one of the new frontiers of chemistry, Solid State Chemistry has a tremendous future and undoubtedly demands the active involvement of many more chemists. A Winter School in Solid State Chemistry was organized at the Indian Institute of Technology, Kanpur, to promote this area and to develop curricular material. Solid State Chemistry being lighly interdisciplinary in nature, the lecturers and participants at the Winter School had widely different backgrounds and interests. It was my great desire that the lecture material from the Winter School should become available to a larger body of students, teachers and research workers interested in the solid state and hence this volume.
Book Synopsis Ceramic Materials by : C. Barry Carter
Download or read book Ceramic Materials written by C. Barry Carter and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, comprehensive text. Building on a foundation of crystal structures, phase equilibria, defects, and the mechanical properties of ceramic materials, students are shown how these materials are processed for a wide diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text, and a chapter is devoted to ceramics as gemstones. This course-tested text now includes expanded chapters on the role of ceramics in industry and their impact on the environment as well as a chapter devoted to applications of ceramic materials in clean energy technologies. Also new are expanded sets of text-specific homework problems and other resources for instructors. The revised and updated Second Edition is further enhanced with color illustrations throughout the text.
