Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Sicfp11
Download Sicfp11 full books in PDF, epub, and Kindle. Read online Sicfp11 ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Mobile Working Hydraulic System Dynamics by : Mikael Axin
Download or read book Mobile Working Hydraulic System Dynamics written by Mikael Axin and published by Linköping University Electronic Press. This book was released on 2015-09-07 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with innovative working hydraulic systems for mobile machines. Flow control systems are studied as an alternative to load sensing. The fundamental difference is that the pump is controlled based on the operator’s command signals rather than feedback signals from the loads. This control approach enables higher energy efficiency and there is no load pressure feedback causing stability issues. Experimental results show a reduced pump pressure margin and energy saving potential for a wheel loader application. The damping contribution from the inlet and outlet orifice in directional valves is studied. Design rules are developed and verified by experiments. A novel system architecture is proposed where flow control, load sensing and open-centre are merged into a generalized system description. The proposed system is configurable and the operator can realize the characteristics of any of the standard systems without compromising energy efficiency. This can be done non-discretely on-the-fly. Experiments show that it is possible to avoid unnecessary energy losses while improving system response and increasing stability margins compared to load sensing. Static and dynamic differences between different control modes are also demonstrated experimentally.
Book Synopsis Advances in Mechanism, Machine Science and Engineering in China by : Xinjun Liu
Download or read book Advances in Mechanism, Machine Science and Engineering in China written by Xinjun Liu and published by Springer Nature. This book was released on 2023-05-31 with total page 2228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the conference proceedings of the 23rd IFToMM China International Conference on Mechanism and Machine Science & Engineering (IFToMM CCMMS 2022). CCMMS was initiated in 1982, and it is the most important forum held in China for the exchange of research ideas, presentation of technical and scientific achievements, and discussion of future directions in the field of mechanism and machine science. The topics include parallel/hybrid mechanism synthesis and analysis, theoretical & computational kinematics, compliant mechanisms and micro/nano-mechanisms, reconfigurable and metamorphic mechanisms, space structures, mechanisms and materials, structure adaptation in space environment and ground testing, large-scale membrane deployable structures, construction and application of super-scale space systems, cams, gears and combining mechanisms, fluid power mechatronics drivetrain, mechanical design theory and methods, dynamics and vibration control, mechatronics, biologically inspired mechanisms and robotics, medical & rehabilitation robotics, mobile robotics, soft robotics, heavy non-road mobile machine, robot applications, engineering education on mechanisms, machines, and robotics. This book provides a state-of-the-art overview of current advances in mechanism and machine science in China. The inspiring ideas presented in the papers enlighten academic research and industrial application. The potential readers include academic researchers and industrial professionals in mechanism and machine science.
Book Synopsis Advances in Hydraulic and Pneumatic Drives and Control 2020 by : Jarosław Stryczek
Download or read book Advances in Hydraulic and Pneumatic Drives and Control 2020 written by Jarosław Stryczek and published by Springer Nature. This book was released on 2020-10-18 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technical achievements in the field of hydraulic drives. The chapters, selected from contributions presented at the International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Controls, NSHP 2020, held on October 21-23, 2020, in Trzebieszowice, Poland, cover a wide range of topics such as theoretical advances in fluid technology, work machines in mining, construction, marine and manufacturing industry, and practical issues relating to the application and operation of hydraulic drives. Further topics include: safety and environmental issues associated with the use of machines with hydraulic drive, and new materials in design of hydraulic components. A special emphasis is given to new solutions for hydraulic components and systems as well as to the identification of phenomena and processes occurring during the operation of hydraulic and pneumatic systems.
Book Synopsis Sustainable Design and Manufacturing 2014 Part 1 by : R. Setchi
Download or read book Sustainable Design and Manufacturing 2014 Part 1 written by R. Setchi and published by Lulu.com. This book was released on with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Hydrostatic Pumps and Motors by : Jaroslav Ivantysyn
Download or read book Hydrostatic Pumps and Motors written by Jaroslav Ivantysyn and published by . This book was released on 2003 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Hydraulic Systems for Mobile Equipment by : TIMOTHY W. DELL
Download or read book Hydraulic Systems for Mobile Equipment written by TIMOTHY W. DELL and published by . This book was released on 2021-12-06 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Systems for Mobile Equipment is the gold standard for hydraulics instruction, offering a comprehensive, single-source resource for introductory and advanced content. It provides very detailed, high-level instruction for students studying to become professional mobile hydraulics service technicians. With a primary emphasis on agricultural and construction machinery, it can also empower students working in any related field of hydraulics. The textbook is correlated to the competencies of the AED Hydraulics/Hydrostatics and Administrative/Safety Standards and the ASE Education Foundation Heavy Trucks Task List.
Book Synopsis Sliding Modes in Control and Optimization by : Vadim I. Utkin
Download or read book Sliding Modes in Control and Optimization written by Vadim I. Utkin and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to systems with discontinuous control. The study of discontinuous dynamic systems is a multifacet problem which embraces mathematical, control theoretic and application aspects. Times and again, this problem has been approached by mathematicians, physicists and engineers, each profession treating it from its own positions. Interestingly, the results obtained by specialists in different disciplines have almost always had a significant effect upon the development of the control theory. It suffices to mention works on the theory of oscillations of discontinuous nonlinear systems, mathematical studies in ordinary differential equations with discontinuous righthand parts or variational problems in nonclassic statements. The unremitting interest to discontinuous control systems enhanced by their effective application to solution of problems most diverse in their physical nature and functional purpose is, in the author's opinion, a cogent argument in favour of the importance of this area of studies. It seems a useful effort to consider, from a control theoretic viewpoint, the mathematical and application aspects of the theory of discontinuous dynamic systems and determine their place within the scope of the present-day control theory. The first attempt was made by the author in 1975-1976 in his course on "The Theory of Discontinuous Dynamic Systems" and "The Theory of Variable Structure Systems" read to post-graduates at the University of Illinois, USA, and then presented in 1978-1979 at the seminars held in the Laboratory of Systems with Discontinous Control at the Institute of Control Sciences in Moscow.
Book Synopsis Hydraulic Control Systems by : Herbert E. Merritt
Download or read book Hydraulic Control Systems written by Herbert E. Merritt and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of hydraulic control is rapidly growing and the objective of this book is to present a rational and well-balanced treatment of its components and systems. Coverage includes a review of applicable topics in fluid mechanisms; components encountered in hydraulic servo controlled systems; systems oriented issues and much more. Also offers practical suggestions concerning testing and limit cycle oscillation problems.
Book Synopsis Condition Assessment of Aged Structures by : J K Paik
Download or read book Condition Assessment of Aged Structures written by J K Paik and published by Elsevier. This book was released on 2014-01-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any structural system in service is subject to age-related deterioration, leading to potential concerns regarding maintenance, health & safety, environmental and economic implications. Condition assessment of aged structures is an invaluable, single source of information on structural assessment techniques for marine and land-based structures such as ships, offshore installations, industrial plant and buildings. Topics covered include: - - Current practices and standards for structural condition assessment - - Fundamental mechanisms and advanced mathematical methods for predicting structural deterioration - - Residual strength assessment of deteriorated structures - - Inspection and maintenance of aged structures - - Reliability and risk assessment of aged structuresProfessionals from a broad range of disciplines will be able to gain a better understanding of current practices and standards for structural condition assessment or health monitoring, and what future trends might be. - Single source of information on structural assessment techniques for marine and land-based structures - Examines the residual strength and reliability of aged structures - Assesses current practices covering inspection, health monitoring and maintenance
Book Synopsis Hydraulic Servo-systems by : Mohieddine Jelali
Download or read book Hydraulic Servo-systems written by Mohieddine Jelali and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date book details the basic concepts of many recent developments of nonlinear identification and nonlinear control, and their application to hydraulic servo-systems. It is very application-oriented and provides the reader with detailed working procedures and hints for implementation routines and software tools.
Book Synopsis Sliding Mode Control in Electro-Mechanical Systems by : Vadim Utkin
Download or read book Sliding Mode Control in Electro-Mechanical Systems written by Vadim Utkin and published by CRC Press. This book was released on 2017-12-19 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Apply Sliding Mode Theory to Solve Control Problems Interest in SMC has grown rapidly since the first edition of this book was published. This second edition includes new results that have been achieved in SMC throughout the past decade relating to both control design methodology and applications. In that time, Sliding Mode Control (SMC) has continued to gain increasing importance as a universal design tool for the robust control of linear and nonlinear electro-mechanical systems. Its strengths result from its simple, flexible, and highly cost-effective approach to design and implementation. Most importantly, SMC promotes inherent order reduction and allows for the direct incorporation of robustness against system uncertainties and disturbances. These qualities lead to dramatic improvements in stability and help enable the design of high-performance control systems at low cost. Written by three of the most respected experts in the field, including one of its originators, this updated edition of Sliding Mode Control in Electro-Mechanical Systems reflects developments in the field over the past decade. It builds on the solid fundamentals presented in the first edition to promote a deeper understanding of the conventional SMC methodology, and it examines new design principles in order to broaden the application potential of SMC. SMC is particularly useful for the design of electromechanical systems because of its discontinuous structure. In fact, where the hardware of many electromechanical systems (such as electric motors) prescribes discontinuous inputs, SMC becomes the natural choice for direct implementation. This book provides a unique combination of theory, implementation issues, and examples of real-life applications reflective of the authors’ own industry-leading work in the development of robotics, automobiles, and other technological breakthroughs.
Book Synopsis Modern Electric, Hybrid Electric, and Fuel Cell Vehicles by : Mehrdad Ehsani
Download or read book Modern Electric, Hybrid Electric, and Fuel Cell Vehicles written by Mehrdad Ehsani and published by CRC Press. This book was released on 2018-02-02 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is an introduction to automotive technology, with specic reference to battery electric, hybrid electric, and fuel cell electric vehicles. It could serve electrical engineers who need to know more about automobiles or automotive engineers who need to know about electrical propulsion systems. For example, this reviewer, who is a specialist in electric machinery, could use this book to better understand the automobiles for which the reviewer is designing electric drive motors. An automotive engineer, on the other hand, might use it to better understand the nature of motors and electric storage systems for application in automobiles, trucks or motorcycles. The early chapters of the book are accessible to technically literate people who need to know something about cars. While the rst chapter is historical in nature, the second chapter is a good introduction to automobiles, including dynamics of propulsion and braking. The third chapter discusses, in some detail, spark ignition and compression ignition (Diesel) engines. The fourth chapter discusses the nature of transmission systems.” —James Kirtley, Massachusetts Institute of Technology, USA “The third edition covers extensive topics in modern electric, hybrid electric, and fuel cell vehicles, in which the profound knowledge, mathematical modeling, simulations, and control are clearly presented. Featured with design of various vehicle drivetrains, as well as a multi-objective optimization software, it is an estimable work to meet the needs of automotive industry.” —Haiyan Henry Zhang, Purdue University, USA “The extensive combined experience of the authors have produced an extensive volume covering a broad range but detailed topics on the principles, design and architectures of Modern Electric, Hybrid Electric, and Fuel Cell Vehicles in a well-structured, clear and concise manner. The volume offers a complete overview of technologies, their selection, integration & control, as well as an interesting Technical Overview of the Toyota Prius. The technical chapters are complemented with example problems and user guides to assist the reader in practical calculations through the use of common scientic computing packages. It will be of interest mainly to research postgraduates working in this eld as well as established academic researchers, industrial R&D engineers and allied professionals.” —Christopher Donaghy-Sparg, Durham University, United Kingdom The book deals with the fundamentals, theoretical bases, and design methodologies of conventional internal combustion engine (ICE) vehicles, electric vehicles (EVs), hybrid electric vehicles (HEVs), and fuel cell vehicles (FCVs). The design methodology is described in mathematical terms, step-by-step, and the topics are approached from the overall drive train system, not just individual components. Furthermore, in explaining the design methodology of each drive train, design examples are presented with simulation results. All the chapters have been updated, and two new chapters on Mild Hybrids and Optimal Sizing and Dimensioning and Control are also included • Chapters updated throughout the text. • New homework problems, solutions, and examples. • Includes two new chapters. • Features accompanying MATLABTM software.
Book Synopsis Fundamentals of Multibody Dynamics by : Farid Amirouche
Download or read book Fundamentals of Multibody Dynamics written by Farid Amirouche and published by Springer Science & Business Media. This book was released on 2007-05-24 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook – a result of the author’s many years of research and teaching – brings together diverse concepts of the versatile tool of multibody dynamics, combining the efforts of many researchers in the field of mechanics.
Book Synopsis Recent Advances in Mechatronics - 1999 by : Okyay Kaynak
Download or read book Recent Advances in Mechatronics - 1999 written by Okyay Kaynak and published by Springer. This book was released on 1999-06 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an interdisciplinary conference involved with the synergistic integration of mechanical engineering with electronics and intelligent computer control for design and manufacture of products and processes. Topics include: (1) mechatronics design, (2) distributed systems, (3) vision and sensors, (4) robots and mobile machines, (5) vibration and control, (6) computational intelligence in mechatronics, (7) embedded real time systems, (8) micro-mechatronics, (9) motion control, (10) hardware/software co-design, and (11) intelligent manufacturing systems.
Book Synopsis Progress in the Analysis and Design of Marine Structures by : Carlos Guedes Soares
Download or read book Progress in the Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2017-04-28 with total page 2192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Analysis and Design of Marine Structures collects the contributions presented at MARSTRUCT 2017, the 6th International Conference on Marine Structures (Lisbon, Portugal, 8-10 May 2017). The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, and the fifth in Southampton, UK in March 2015. This Conference series deals with Ship and Offshore Structures, addressing topics in the areas of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation, and - Structural Reliability, Safety and Environmental Protection Progress in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures.
Book Synopsis Network Models and Optimization by : Mitsuo Gen
Download or read book Network Models and Optimization written by Mitsuo Gen and published by Springer Science & Business Media. This book was released on 2008-07-10 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Network models are critical tools in business, management, science and industry. “Network Models and Optimization” presents an insightful, comprehensive, and up-to-date treatment of multiple objective genetic algorithms to network optimization problems in many disciplines, such as engineering, computer science, operations research, transportation, telecommunication, and manufacturing. The book extensively covers algorithms and applications, including shortest path problems, minimum cost flow problems, maximum flow problems, minimum spanning tree problems, traveling salesman and postman problems, location-allocation problems, project scheduling problems, multistage-based scheduling problems, logistics network problems, communication network problem, and network models in assembly line balancing problems, and airline fleet assignment problems. The book can be used both as a student textbook and as a professional reference for practitioners who use network optimization methods to model and solve problems.
Book Synopsis Vehicle Propulsion Systems by : Lino Guzzella
Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2007-09-21 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this text have written a comprehensive introduction to the modeling and optimization problems encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of vehicle propulsion systems. Its focus is on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms.
