Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Power To Fuel
Download Power To Fuel full books in PDF, epub, and Kindle. Read online Power To Fuel ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Power to Fuel by : Giuseppe Spazzafumo
Download or read book Power to Fuel written by Giuseppe Spazzafumo and published by Academic Press. This book was released on 2021-05-25 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power to Fuel: How to Speed Up a Hydrogen Economy highlights how the surplus of electricity from renewable sources can be usefully accumulated thanks to hydrogen overcoming the obstacles that can prevent the final use of hydrogen on a large scale. The book includes an introduction and sections on the production of hydrogen, conversion of hydrogen into synthetic fuel, the power-to-fuel concept, and renewable energy source descriptions. The second and third levels are structured identically with a standalone approach that covers established and commercial pathways, emerging pathways, and cost analysis sections within each subject specific chapter, making the content easily referenced and applied.Readers will find details on the state-of-the-art and emerging technologies of various power to fuels options suitable for different final uses of the stored energy, as well as figures and diagrams that illustrate and compare the different processes. The book contains examples of existing plants and pilot projects that will be useful for academics dealing with renewable energies and energy storage. - Discusses possible applications of synthetic fuels, describing existing plants for fuel production - Contains opinions on opportunities offered by the power to fuel concept and by single technologies - Presents power to fuel techno-economic models and calculations down to system level
Book Synopsis Power to Fuel by : Giuseppe Spazzafumo
Download or read book Power to Fuel written by Giuseppe Spazzafumo and published by Elsevier. This book was released on 2021-06-03 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power to Fuel: How to Speed Up a Hydrogen Economy highlights how the surplus of electricity from renewable sources can be usefully accumulated thanks to hydrogen overcoming the obstacles that can prevent the final use of hydrogen on a large scale. The book includes an introduction and sections on the production of hydrogen, conversion of hydrogen into synthetic fuel, the power-to-fuel concept, and renewable energy source descriptions. The second and third levels are structured identically with a standalone approach that covers established and commercial pathways, emerging pathways, and cost analysis sections within each subject specific chapter, making the content easily referenced and applied. Readers will find details on the state-of-the-art and emerging technologies of various power to fuels options suitable for different final uses of the stored energy, as well as figures and diagrams that illustrate and compare the different processes. The book contains examples of existing plants and pilot projects that will be useful for academics dealing with renewable energies and energy storage. Discusses possible applications of synthetic fuels, describing existing plants for fuel production Contains opinions on opportunities offered by the power to fuel concept and by single technologies Presents power to fuel techno-economic models and calculations down to system level
Book Synopsis Power-to-Gas: Technology and Business Models by : Markus Lehner
Download or read book Power-to-Gas: Technology and Business Models written by Markus Lehner and published by Springer. This book was released on 2014-07-18 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increased production of energy from renewable sources leads to a need for both new and enhanced capacities for energy transmission and intermediate storage. The book first compares different available storage options and then introduces the power-to-gas concept in a comprehensive overview of the technology. The state of the art, advancements, and future requirements for both water electrolysis and methanation are described. The integration of renewable hydrogen and methane into the gas grid is discussed in terms of the necessary technological measures to be taken. Because the power-to-gas system is very flexible, providing numerous specific applications for different targets within the energy sector, possible business models are presented on the basis of various process chains taking into account different plant scales and operating scenarios. The influence of the scale and the type of the integration of the technology into the existing energy network is highlighted with an emphasis on economic consequences. Finally, legal aspects of the operation and integration of the power-to-gas system are discussed.
Book Synopsis Power Generation from Solid Fuels by : Hartmut Spliethoff
Download or read book Power Generation from Solid Fuels written by Hartmut Spliethoff and published by Springer Science & Business Media. This book was released on 2010-03-18 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Generation from Solid Fuels introduces the different technologies to produce heat and power from solid fossil (hard coal, brown coal) and renewable (biomass, waste) fuels, such as combustion and gasification, steam power plants and combined cycles etc. The book discusses technologies with regard to their efficiency, emissions, operational behavior, residues and costs. Besides proven state of the art processes, the focus is on the potential of new technologies currently under development or demonstration. The main motivation of the book is to explain the technical possibilities for reducing CO2 emissions from solid fuels. The strategies which are treated are: more efficient power and heat generation technologies, processes for the utilisation of renewable solid fuels, such as biomass and waste, and technologies for carbon capture and storage. Power Generation from Solid Fuels provides, both to academia and industry, a concise treatment of industrial combustion of all types of solid, hopefully inspiring the next generation of engineers and scientists.
Book Synopsis Combined Heat and Power by : Paul Breeze
Download or read book Combined Heat and Power written by Paul Breeze and published by Academic Press. This book was released on 2017-11-30 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combined Heat and Power Generation is a concise, up-to-date and accessible guide to the combined delivery of heat and power to anything, from a single home to a municipal power plant. Breeze discusses the historical background for CHP and why it is set to be a key emission control strategy for the 21st Century. Various technologies such as piston engines, gas turbines and fuel cells are discussed. Economic and environmental factors also are considered and analyzed, making this a very valuable resource for those involved with the research, design, implementation and management of the provision of heat and power. - Discusses the historical background of combined heat and power usage and why CHP is seen as a key emission control strategy for the 21st Century - Explores the technological aspects of CHP in a clear and concise style and delves into various key technologies, such as piston engines, steam and gas turbines and fuel cells - Evaluates the economic factors of CHP and the installation of generation systems, along with energy conversion efficiencies
Book Synopsis PEM Water Electrolysis by : Dmitri Bessarabov
Download or read book PEM Water Electrolysis written by Dmitri Bessarabov and published by Academic Press. This book was released on 2018-08-04 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Water Electrolysis, a volume in the Hydrogen Energy and Fuel Cell Primers series presents the most recent advances in the field. It brings together information that has thus far been scattered in many different sources under one single title, making it a useful reference for industry professionals, researchers and graduate students. Volumes One and Two allow readers to identify technology gaps for commercially viable PEM electrolysis systems for energy applications and examine the fundamentals of PEM electrolysis and selected research topics that are top of mind for the academic and industry community, such as gas cross-over and AST protocols. The book lays the foundation for the exploration of the current industrial trends for PEM electrolysis, such as power to gas application and a strong focus on the current trends in the application of PEM electrolysis associated with energy storage. - Presents the fundamentals and most current knowledge in proton exchange membrane water electrolyzers - Explores the technology gaps and challenges for commercial deployment of PEM water electrolysis technologies - Includes unconventional systems, such as ozone generators - Brings together information from many different sources under one single title, making it a useful reference for industry professionals, researchers and graduate students alike
Book Synopsis Sustainable Fuel Technologies Handbook by : Suman Dutta
Download or read book Sustainable Fuel Technologies Handbook written by Suman Dutta and published by Academic Press. This book was released on 2020-09-25 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Fuel Technologies Handbook provides a thorough thermodynamic analysis of new and current methods to give detailed insight into energy efficiency processes. This book includes the production methods, storage systems, and applications in various engines, as well as the safety related issues associated with all stages of production, storage, and utilization. With a comparison of cost implications and a techno-economic evaluation checking the feasibility of sustainable fuel use, this handbook is an invaluable reference source for researchers, professionals, and scientists working in the field of sustainability. The present power from solar, biomass, wind, hydrogen and other forms of renewable energy generated from sustainable sources can be harvested by various means and utilized in a variety of industries, supporting the need for clean fuels in modern society. However, there is still limited global availability and insufficient storage, which are required for efficient and effective harvesting of sustainable fuels. - Discusses new and innovative sustainable fuel technologies - Provides an integrated approach for modern tools, methodologies, and indicators in sustainable technologies - Evaluates advanced fuel technologies alongside other transformational options
Book Synopsis Oxy-Fuel Combustion for Power Generation and Carbon Dioxide (CO2) Capture by : L Zheng
Download or read book Oxy-Fuel Combustion for Power Generation and Carbon Dioxide (CO2) Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. - Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers - Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment - Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture
Book Synopsis Hydrogen Fuel Cell Technology for Stationary Applications by : Badea, Gheorghe
Download or read book Hydrogen Fuel Cell Technology for Stationary Applications written by Badea, Gheorghe and published by IGI Global. This book was released on 2021-04-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unconventional energy sources have gained and will continue to gain an increasing share of energy systems around the world. Today, hydrogen is recognized as a non-polluting energy carrier because it does not contribute to global warming if it is produced from renewable sources. Hydrogen is already part of today's chemical industry, but as an energy source, its rare advantages can only be obtained with the help of technologies. Currently, the fuel cell is considered the cleanest sustainable energy. With the development of fuel cells, hydrogen-based energy generation becomes a reality. Hydrogen Fuel Cell Technology for Stationary Applications is an essential publication that focuses on the advantages of hydrogen as a primary energy center and addresses its use in the sustainable future of stationary applications. While highlighting a broad range of topics including cost expectations, production methods, and social impact, this publication explores all aspects of the implementation and dissemination of fuel cell technology in the hope of establishing a sustainable marketplace for it. This book is ideally designed for fuel cell manufacturers, architects, electrical engineers, civil engineers, environmental engineers, advocates, manufacturers, mechanics, researchers, academicians, and students.
Book Synopsis Fuel Cells: Technologies for Fuel Processing by : Dushyant Shekhawat
Download or read book Fuel Cells: Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations
Book Synopsis Gas-Turbine Power Generation by : Paul Breeze
Download or read book Gas-Turbine Power Generation written by Paul Breeze and published by Academic Press. This book was released on 2016-02-24 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas-Turbine Power Generation is a concise, up-to-date, and readable guide providing an introduction to gas turbine power generation technology. It includes detailed descriptions of gas fired generation systems, demystifies the functions of gas fired technology, and explores the economic and environmental risk factors Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide that will help them establish a reliable power supply as they also account for both social and economic objectives. - Provides a concise, up-to-date, and readable guide on gas turbine power generation technology - Focuses on the evolution of gas-fired power generation using gas turbines - Evaluates the economic and environmental viability of the system with concise diagrams and accessible explanations
Book Synopsis Control of Fuel Cell Power Systems by : Jay T. Pukrushpan
Download or read book Control of Fuel Cell Power Systems written by Jay T. Pukrushpan and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the latest research in the control of fuel cell technology, this book will contribute to the commercial viability of the technology. The authors’ background in automotive technology gives the work added authority as a vital element of future planning.
Download or read book Solar Hydrogen written by Mario Pagliaro and published by Royal Society of Chemistry. This book was released on 2012 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: With reference to many examples as well as to new technologies, written by experts in the field, this accessible book provides insight into a crucial technology and numerous color pictures contribute to the book's readability.
Download or read book Plutonium written by Frank von Hippel and published by Springer Nature. This book was released on 2019-12-23 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a readable and thought-provoking analysis of the issues surrounding nuclear fuel reprocessing and fast-neutron reactors, including discussion of resources, economics, radiological risk and resistance to nuclear proliferation. It describes the history and science behind reprocessing, and gives an overview of the status of reprocessing programmes around the world. It concludes that such programs should be discontinued. While nuclear power is seen by many as the only realistic solution to the carbon emission problem, some national nuclear establishments have been pursuing development and deployment of sodium-cooled plutonium breeder reactors, and plutonium recycling. Its proponents argue that this system would offer significant advantages relative to current light water reactor technology in terms of greater uranium utilization efficiency, and that separating out the long-lived plutonium and other transuranics from spent fuel and fissioning them in fast reactors would greatly reduce the duration of the toxicity of radioactive waste. However, the history of efforts to deploy this system commercially in a number of countries over the last six decades has been one of economic and technical failure and, in some cases, was used to mask clandestine nuclear weapon development programs. Covering topics of significant public interest including nuclear safety, fuel storage, environmental impact and the spectre of nuclear terrorism, this book presents a comprehensive analysis of the issue for nuclear engineers, policy analysts, government officials and the general public. "Frank von Hippel, Jungmin Kang, and Masafumi Takubo, three internationally renowned nuclear experts, have done a valuable service to the global community in putting together this book, which both historically and comprehensively covers the “plutonium age” as we know it today. They articulate in a succinct and clear manner their views on the dangers of a plutonium economy and advocate a ban on the separation of plutonium for use in the civilian fuel cycle in view of the high proliferation and nuclear-security risks and lack of economic justification." (Mohamed ElBaradei, Director General, International Atomic Energy Agency (1997-2009), Nobel Peace Prize (2005)) "The 1960s dream of a ‘plutonium economy’ has not delivered abundant low-cost energy, but instead has left the world a radioactive legacy of nuclear weapons proliferation and the real potential for nuclear terrorism. Kang, Takubo, and von Hippel explain with power and clarity what can be done to reduce these dangers. The governments of the remaining countries whose nuclear research and development establishments are still pursuing the plutonium dream should pay attention.” (Senator Edward Markey, a leader in the US nuclear-disarmament movement as a member of Congress since 1976) "The authors have done an invaluable service by putting together in one place the most coherent analysis of the risks associated with plutonium, and the most compelling argument for ending the practice of separating plutonium from spent fuel for any purpose. They have given us an easily accessible history of the evolution of thinking about the nuclear fuel cycle, the current realities of nuclear power around the world and, arguably most important, a clear alternative path to deal with the spent fuel arising from nuclear reactors for decades to centuries to come." (Robert Gallucci, Chief US negotiator with North Korea (1994); Dean, Georgetown University School of Foreign Service (1996-2009); President, MacArthur Foundation (2009-2014))
Download or read book Energy Storage written by Manuel Bailera and published by Springer Nature. This book was released on 2020-05-09 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed analysis of Power-to-Gas, a promising energy storage technology. It discusses the main mechanisms involved, and presents two Power-to-Gas and carbon capture hybridizations. The book begins by providing an introduction to energy storage technologies. It then reviews a number of Power-to-Gas projects now in progress, highlighting the current barriers to commercializing the technology. Moreover, the book presents two novel Power-to-Gas hybridizations, which improve the technology’s applicability in terms of efficiency, utilization of resources and profitability. Given its scope, the book will be of interest to graduate students, researchers and practitioners in the fields of engineering and energy.
Book Synopsis Electrochemical Power Sources by : Vladimir S. Bagotsky
Download or read book Electrochemical Power Sources written by Vladimir S. Bagotsky and published by John Wiley & Sons. This book was released on 2015-01-07 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Power Sources (EPS) provides in a concise way the operational features, major types, and applications of batteries, fuel cells, and supercapacitors • Details the design, operational features, and applications of batteries, fuel cells, and supercapacitors • Covers improvements of existing EPSs and the development of new kinds of EPS as the results of intense R&D work • Provides outlook for future trends in fuel cells and batteries • Covers the most typical battery types, fuel cells and supercapacitors; such as zinc-carbon batteries, alkaline manganese dioxide batteries, mercury-zinc cells, lead-acid batteries, cadmium storage batteries, silver-zinc batteries and modern lithium batteries
Download or read book Fuel Cells written by Bei Gou and published by CRC Press. This book was released on 2017-12-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Modeling, Control, and Applications describes advanced research results on modeling and control designs for fuel cells and their hybrid energy systems. Filled with simulation examples and test results, it provides detailed discussions on fuel cell modeling, analysis, and nonlinear control. The book begins with an introduction to fuel cells and fuel cell power systems as well as the fundamentals of fuel cell systems and their components. It then presents the linear and nonlinear modeling of fuel cell dynamics, before discussing typical approaches of linear and nonlinear modeling and control design methods for fuel cells. The authors also explore the Simulink implementation of fuel cells, including the modeling of PEM fuel cells and control designs. They cover the applications of fuel cells in vehicles, utility power systems, stand-alone systems, and hybrid renewable energy systems. The book concludes with the modeling and analysis of hybrid renewable energy systems, which integrate fuel cells, wind power, and solar power. Mathematical preliminaries on linear and nonlinear control are provided in an appendix. With the need for alternative power well established, we are seeing unprecedented research in fuel cell technology. Written by scientists directly involved with the research, this book presents approaches and achievements in the linear and nonlinear modeling and control design of PEM fuel cells.