Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Plasmonic Components Fabricated By Two Photon Polymerization And Nanoimprint Lithography
Download Plasmonic Components Fabricated By Two Photon Polymerization And Nanoimprint Lithography full books in PDF, epub, and Kindle. Read online Plasmonic Components Fabricated By Two Photon Polymerization And Nanoimprint Lithography ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Plasmonic Components Fabricated by Two-Photon Polymerization and Nanoimprint Lithography by : Andreas Seidel
Download or read book Plasmonic Components Fabricated by Two-Photon Polymerization and Nanoimprint Lithography written by Andreas Seidel and published by Cuvillier Verlag. This book was released on 2010-12-22 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: lasmonics is an increasingly important field of research within the larger field of photonics. Photonic components utilizing surface plasmon polariton modes, supported by various metal-dielectric configurations, hold the promise of a variety of applications in sensing and on-chip data transmission. Plasmonic components based on dielectric-loaded plasmon polariton waveguides are in particular attracting attention recently, due to their comparative ease of manufacture and their potential to aid in miniaturizing optical circuits. The two-photon polymerization direct laser writing technology has already been shown to be a powerful tool in the fabrication of plasmonic waveguides. This thesis builds on previous work that has already shown the viability of two-photon polymerization as a manufacturing technique, and expands upon it by adding a nanolithography process. The largest intrinsic disadvantage of direct laser writing is overcome in this fashion - instead of a purely serial process, a parallel fabrication process is developed. By aid of this process, the fabrication of plasmonic waveguides becomes not only optimally flexible, but also faster and cheaper. The plasmonic waveguide structures presented in this thesis represent new designs not shown before, including polarization-dependent splitters, Mach-Zehnder interferometers, and a new class of structure called racetrack resonators. The designs are characterized largely by leakage radiation microscopy and compared to similar designs fabricated by different methods. Where comparison is possible, the structures presented here show much improved characteristics over results previously reported by other groups. An investigation of localized surface plasmons is also made, which includes the interference of surface plasmons with each other and the interaction of surface plasmons with metal nanoparticles. This has led to new optical effects, which have not been observed in this way before. This thesis resulted in nine scientific articles, that have been published in peerreviewed journals, as well as a number of conference contributions and proceedings.
Book Synopsis Two-Photon Polymerization and application to Surface Plasmon Polaritons by : Sven Passinger
Download or read book Two-Photon Polymerization and application to Surface Plasmon Polaritons written by Sven Passinger and published by Cuvillier Verlag. This book was released on 2008 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Nanofabrication Handbook by : Stefano Cabrini
Download or read book Nanofabrication Handbook written by Stefano Cabrini and published by CRC Press. This book was released on 2012-02-24 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: While many books are dedicated to individual aspects of nanofabrication, there is no single source that defines and explains the total vision of the field. Filling this gap, Nanofabrication Handbook presents a unique collection of new and the most important established approaches to nanofabrication. Contributors from leading research facilities and academic institutions around the world define subfields, offer practical instructions and examples, and pave the way for future research. Helping readers to select the proper fabricating technique for their experiments, the book provides a broad vision of the most critical problems and explains how to solve them. It includes basic definitions and introduces the main underlying concepts of nanofabrication. The book also discusses the major advantages and disadvantages of each approach and offers a wide variety of examples of cutting-edge applications. Each chapter focuses on a particular method or aspect of study. For every method, the contributors describe the underlying theoretical basis, resolution, patterns and substrates used, and applications. They show how applications at the nanoscale require a different process and understanding than those at the microscale. For each experiment, they elucidate key solutions to problems relating to materials, methods, and surface considerations. A complete resource for this rapidly emerging interdisciplinary field, this handbook provides practical information for planning the experiments of any project that employs nanofabrication techniques. It gives readers a foundation to enter the complex world of nanofabrication and inspires the scientific community at large to push the limits of nanometer resolution.
Book Synopsis Optically Induced Nanostructures by : Karsten König
Download or read book Optically Induced Nanostructures written by Karsten König and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-05-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructuring of materials is a task at the heart of many modern disciplines in mechanical engineering, as well as optics, electronics, and the life sciences. This book includes an introduction to the relevant nonlinear optical processes associated with very short laser pulses for the generation of structures far below the classical optical diffraction limit of about 200 nanometers as well as coverage of state-of-the-art technical and biomedical applications. These applications include silicon and glass wafer processing, production of nanowires, laser transfection and cell reprogramming, optical cleaning, surface treatments of implants, nanowires, 3D nanoprinting, STED lithography, friction modification, and integrated optics. The book highlights also the use of modern femtosecond laser microscopes and nanoscopes as novel nanoprocessing tools.
Book Synopsis Nanofabrication by : Maria Stepanova
Download or read book Nanofabrication written by Maria Stepanova and published by Springer Science & Business Media. This book was released on 2011-11-08 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to update scientists and engineers on the current state of the art in a variety of key techniques used extensively in the fabrication of structures at the nanoscale. The present work covers the essential technologies for creating sub 25 nm features lithographically, depositing layers with nanometer control, and etching patterns and structures at the nanoscale. A distinguishing feature of this book is a focus not on extension of microelectronics fabrication, but rather on techniques applicable for building NEMS, biosensors, nanomaterials, photonic crystals, and other novel devices and structures that will revolutionize society in the coming years.
Book Synopsis Multiphoton Lithography by : Jürgen Stampfl
Download or read book Multiphoton Lithography written by Jürgen Stampfl and published by John Wiley & Sons. This book was released on 2016-09-12 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book on this fascinating, interdisciplinary topic meets the much-felt need for an up-to-date overview of the field. Written with both beginners and professionals in mind, this ready reference begins with an introductory section explaining the basics of the various multi-photon and photochemical processes together with a description of the equipment needed. A team of leading international experts provides the latest research results on such materials as new photoinitiators, hybrid photopolymers, and metallic carbon nanotube composites. They also cover promising applications and prospective trends, including photonic crystals, microfluidic devices, biological scaffolds, metamaterials, waveguides, and functionalized hydrogels. By bringing together the essentials for both industrial and academic researchers, this is an invaluable companion for materials scientists, polymer chemists, surface chemists, surface physicists, biophysicists, and medical scientists working with 3D micro- and nanostructures.
Book Synopsis Handbook of Laser Micro- and Nano-Engineering by : KOJI SUGIOKA.
Download or read book Handbook of Laser Micro- and Nano-Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Book Synopsis Lab-on-Fiber Technology by : Andrea Cusano
Download or read book Lab-on-Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.
Book Synopsis Environmental, Chemical and Medical Sensors by : Shantanu Bhattacharya
Download or read book Environmental, Chemical and Medical Sensors written by Shantanu Bhattacharya and published by Springer. This book was released on 2017-12-22 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of sensor technologies as well as the recent research for the development of environmental, chemical and medical sensor technologies. Chapters include current research on microflow cytometry, microfluidic devices, colorimetric sensors, and the development of low-cost optical densitometric sensors and paper based analytical devices for environmental and biomedical applications. Special focus has been given to nanotechnology and nanostructures- their fabrication, uses and utility in different fields of research such as for the design of tools for medical diagnostics, therapeutics, as well as for detection and estimation of pollutant levels in water and air quality monitoring. This book is intended as a resource for researchers working in the field of sensor development across the world.
Book Synopsis Nanoimprint Lithography: An Enabling Process for Nanofabrication by : Weimin Zhou
Download or read book Nanoimprint Lithography: An Enabling Process for Nanofabrication written by Weimin Zhou and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprint Lithography: An enabling process for nanofabrication presents a comprehensive description of nanotechnology that is one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures, and an emerging lithography candidates for 22, 16 and 11 nm nodes. It provides the exciting, multidisciplinary field, offering a wide range of topics covering: principles, process, material and application. This book would be of specific interest for researchers and graduate students in the field of nanoscience, nanotechnology and nanofabrication, material, physical, chemical, electric engineering and biology. Dr. Weimin Zhou is an associate professor at Shanghai Nanotechnology Promotion Center, China.
Book Synopsis Engineering Optics 2.0 by : Xiangang Luo
Download or read book Engineering Optics 2.0 written by Xiangang Luo and published by Springer. This book was released on 2019-02-28 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive information on the history and status quo of a new research field, which we refer to as Engineering Optics 2.0. The content covers both the theoretical basis and the engineering aspects in connection with various applications. The field of Engineering Optics employs optical theories to practical applications in a broad range of areas. However, the foundation of traditional Engineering Optics was formed several hundred years ago, and the field has developed only very gradually. With technological innovations in both the fabrication and characterization of microstructures, the past few decades have witnessed many groundbreaking changes to the bases of optics, including the generalizing of refraction, reflection, diffraction, radiation and absorption theories. These new theories enable us to break through the barriers in traditional optical technologies, yielding revolutionary advances in traditional optical systems such as microscopes, telescopes and lithography systems.
Book Synopsis Nanoparticulate Materials by : Kathy Lu
Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.
Book Synopsis Vacuum Ultraviolet Spectroscopy by : James A. Samson
Download or read book Vacuum Ultraviolet Spectroscopy written by James A. Samson and published by Academic Press. This book was released on 2000-12-21 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of Vacuum Ultraviolet Spectroscopy was first published in 1967. In the three decades since, the techniques associated with vacuum ultraviolet spectroscopy have been greatly expanded. Originally published as two volumes in the serial "Experimental Methods in the Physical Sciences," Vacuum Ultraviolet Spectroscopy combines in one paperback volume information on the many advances in vacuum ultraviolet (VUV) research. In addition, the book provides students and researchers with concise reviews of the important aspects of designing experiments in the VUV region.This is the only comprehensive treatise describing the use of synchrotron and other light sources for research, along with the new technologies in optical elements, multilayers, mirror coatings, soft x-ray zone plates, VUV detectors, interferometric spectrometers, and subjects such as spectromicroscopy, lithography, and photon-induced fluorescence. Vacuum Ultraviolet Spectroscopy is an ideal handbook both for the beginner and for the experienced researcher in any field requiring the use of VUV radiation. Key Features* Detailed review of synchrotron radiation sources including undulators and wigglers* Comprehensive outline of monochromator design* Concise review of optics theory for multilayers, spectrometers, and zone plates* Information about other important VUV sources such as laser produced plasmas and Electron Beam Ion Trap (EBIT) sources* Applications such as spectromicroscopy, lithography, and fluorescence
Book Synopsis Three-Dimensional Microfabrication Using Two-Photon Polymerization by : Tommaso Baldacchini
Download or read book Three-Dimensional Microfabrication Using Two-Photon Polymerization written by Tommaso Baldacchini and published by William Andrew. This book was released on 2019-10-31 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Microfabrication Using Two-Photon Polymerization, Second Edition offers a comprehensive guide to TPP microfabrication and a unified description of TPP microfabrication across disciplines. It offers in-depth discussion and analysis of all aspects of TPP, including the necessary background, pros and cons of TPP microfabrication, material selection, equipment, processes and characterization. Current and future applications are covered, along with case studies that illustrate the book's concepts. This new edition includes updated chapters on metrology, synthesis and the characterization of photoinitiators used in TPP, negative- and positive-tone photoresists, and nonlinear optical characterization of polymers. This is an important resource that will be useful for scientists involved in microfabrication, generation of micro- and nano-patterns and micromachining. - Discusses the major types of nanomaterials used in the agriculture and forestry sectors, exploring how their properties make them effective for specific applications - Explores the design, fabrication, characterization and applications of nanomaterials for new Agri-products - Offers an overview of regulatory aspects regarding the use of nanomaterials for agriculture and forestry
Book Synopsis Nanostructures And Nanomaterials: Synthesis, Properties, And Applications (2nd Edition) by : Guozhong Cao
Download or read book Nanostructures And Nanomaterials: Synthesis, Properties, And Applications (2nd Edition) written by Guozhong Cao and published by World Scientific Publishing Company. This book was released on 2011-01-03 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the 2nd edition of the original “Nanostructures and Nanomaterials” written by Guozhong Cao and published by Imperial College Press in 2004.This important book focuses not only on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.
Author :Kourosh Kalantar-zadeh Publisher :Springer Science & Business Media ISBN 13 :0387680233 Total Pages :502 pages Book Rating :4.3/5 (876 download)
Book Synopsis Nanotechnology-Enabled Sensors by : Kourosh Kalantar-zadeh
Download or read book Nanotechnology-Enabled Sensors written by Kourosh Kalantar-zadeh and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.
Book Synopsis Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications by : Oxana Vasilievna Kharissova
Download or read book Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications written by Oxana Vasilievna Kharissova and published by . This book was released on 2019 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
