Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Physical Vapour Deposition Of Aluminium Rich Nanostructured Amorphous Metallic Coatings For Wear And Corrosion Protection
Download Physical Vapour Deposition Of Aluminium Rich Nanostructured Amorphous Metallic Coatings For Wear And Corrosion Protection full books in PDF, epub, and Kindle. Read online Physical Vapour Deposition Of Aluminium Rich Nanostructured Amorphous Metallic Coatings For Wear And Corrosion Protection ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Physical Vapour Deposition of Aluminium-rich Nanostructured/amorphous Metallic Coatings for Wear and Corrosion Protection by : Josephine Lawal
Download or read book Physical Vapour Deposition of Aluminium-rich Nanostructured/amorphous Metallic Coatings for Wear and Corrosion Protection written by Josephine Lawal and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Metallic Coatings. Physical Vapour-Deposited Coatings of Aluminium. Specification and Test Methods by : British Standards Institute Staff
Download or read book Metallic Coatings. Physical Vapour-Deposited Coatings of Aluminium. Specification and Test Methods written by British Standards Institute Staff and published by . This book was released on 2006-12-29 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal coatings, Aluminium, Coatings, Vacuum deposition, Corrosion protection, Steels, Low-carbon steels, Low-alloy steels, High-tensile steels, Corrosion-resistant steels, Aluminium alloys, Titanium alloys, Designations, Thickness, Surface treatment, Coating processes, Test methods
Author :Mahmood Aliofkhazraei Publisher :Springer Science & Business Media ISBN 13 :3642179665 Total Pages :262 pages Book Rating :4.6/5 (421 download)
Book Synopsis Nanocoatings by : Mahmood Aliofkhazraei
Download or read book Nanocoatings written by Mahmood Aliofkhazraei and published by Springer Science & Business Media. This book was released on 2011-03-29 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Size effect in structures has been taken into consideration over the last years. In comparison with coatings with micrometer-ranged thickness, nanostructured coatings usually enjoy better and appropriate properties, such as strength and resistance. These coatings enjoy unique magnetic properties and are used with the aim of producing surfaces resistant against erosion, lubricant system, cutting tools, manufacturing hardened sporadic alloys, being resistant against oxidation and corrosion. This book reviews researches on fabrication and classification of nanostructured coatings with focus on size effect in nanometric scale. Size effect on electrochemical, mechanical and physical properties of nanocoatings are presented.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Corrosion Protection and Control Using Nanomaterials by : V S Saji
Download or read book Corrosion Protection and Control Using Nanomaterials written by V S Saji and published by Elsevier. This book was released on 2012-02-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is an expensive and potentially dangerous problem in many industries. The potential application of different nanostructured materials in corrosion protection, prevention and control is a subject of increasing interest. Corrosion protection and control using nanomaterials explores the potential use of nanotechnology in corrosion control.The book is divided into two parts. Part one looks at the fundamentals of corrosion behaviour and the manufacture of nanocrystalline materials. Chapters discuss the impact of nanotechnology in reducing corrosion cost, and investigate the influence of various factors including thermodynamics, kinetics and grain size on the corrosion behaviour of nanocrystalline materials. There are also chapters on electrodeposition and the corrosion behaviour of electrodeposited nanocrystalline materials. Part two provides a series of case studies of applications of nanomaterials in corrosion control. Chapters review oxidation protection using nanocrystalline structures at various temperatures, sol- gel and self-healing nanocoatings and the use of nanoreservoirs and polymer nanocomposites in corrosion control.With its distinguished editors and international team of expert contributors, Corrosion protection and control using nanomaterials is an invaluable reference tool for researchers and engineers working with nanomaterials in a variety of industries including, aerospace, automotive and chemical engineering as well as academics studying the unique protection and control offered by nanomaterials against corrosion. Explores the potential use of nanotechnology and nanomaterials for corrosion prevention, protection and control Discusses the impact of nanotechnology in reducing corrosion cost and investigates various factors on the corrosion behaviour of nanocrystalline materials Provides a series of case studies and applications of nanomaterials for corrosion control
Book Synopsis Modern Surface Engineering Treatments by : Mahmood Aliofkhazraei
Download or read book Modern Surface Engineering Treatments written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.
Book Synopsis Atomic Layer Deposition for Semiconductors by : Cheol Seong Hwang
Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
Book Synopsis Physical vapor deposition and thermal stability of hard oxide coatings by : Ludvig Landälv
Download or read book Physical vapor deposition and thermal stability of hard oxide coatings written by Ludvig Landälv and published by Linköping University Electronic Press. This book was released on 2019-04-26 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art tools for machining metals are primarily based on a metal-ceramic composite (WC-Co) coated with different combinations of carbide, nitride, and oxide coatings. Combinations of these coating materials are optimized to withstand specific wear conditions. Oxide coatings, mainly α-Al2O3, are especially desired because of their high hot-hardness, chemical inertness with respect to the workpiece, and their low friction. The search for possible alloy elements, which may facilitate the deposition of such oxides by means of physical vapor deposition (PVD) techniques, has been the goal of this thesis. The sought alloy should form thermodynamically stable or metastable compounds, compatible with the temperature of use in metal cutting application. This thesis deals with process development and coating characterization of such new oxide alloy thin films, focusing on the Al-V-O, Al-Cr-Si-O, and Cr-Zr-O systems. Alloying aluminum oxide with iso-valent vanadium is a candidate for forming the desired alloys. Therefore, coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited with reactive sputter deposition. X-ray diffraction showed three different crystal structures depending on V-metal fraction in the coating: α-V2O3 rhombohedral structure for 100 at.% V, a defect spinel structure for the intermediate region, (63 - 42 at.% V), and a gamma-alumina-like solid solution at lower V-content, (18 and 7 at.%), were observed, the later was shifted to larger d-spacing compared to the pure γ-Al2O3 sample obtained if deposited with only Al-target. Annealing the Al-rich coatings in air resulted in formation of V2O5 crystals on the surface of the coating after annealing to 500 °C for 42 at.% V and 700 °C for 18 at.% V metal fraction respectively. The highest thermal stability was shown for pure γ-Al2O3-coating which transformed to α-Al2O3 after annealing to 1100° C. Highest hardness was observed for the Al-rich oxides, ~24 GPa. The hardness then decreases with increasing V-content, larger than 7 at.% V metal fraction. Doping the Al2O3 coating with 7 at.% V resulted in a significant surface smoothening compared to the binary oxide. The measured hardness after annealing in air decreased in conjunction with the onset of further oxidation of the coatings. This work increases the understanding of this complicated material system with respect to possible phases formed with pulsed DC magnetron sputtering deposition as well as their response to annealing in air. The inherent difficulties of depositing insulating oxide films with PVD, requiring a closed electrical circuit, makes the investigation of process stability an important part of this research. In this context, I investigated the influence of adding small amount of Si in Al-Cr cathode on the coating properties in a pulsed DC industrial cathodic arc system and the plasma characteristics, process parameters, and coating properties in a lab DC cathodic arc system. Si was chosen here due to a previous study showing improved erosion behavior of Al-Cr-Si over pure Al-Cr cathode without Si incorporation in the coating. The effect of Si in the Al-Cr cathode in the industrial cathodic arc system showed slight improvements on the cathode erosion but Si was found in all coatings where Si was added in the cathode. The Si addition promoted the formation of the B1-like metastable cubic oxide phase and the incorporation led to reduced or equal hardness values compared to the corresponding Si-free processes. The DC-arc plasma study on the same material system showed only small improvements in the cathode erosion and process stability (lower pressure and cathode voltage) when introducing 5 at.% Si in the Al70Cr30-cathode. The presence of volatile SiO species could be confirmed through plasma analysis, but the loss of Si through these species was negligible, since the coating composition matched the cathode composition also under these conditions. The positive effect of added Si on the process stability at the cathode surface, should be weighed against Si incorporation in the coating. This incorporation seems to lead to a reduction in mechanical properties in the as-deposited coatings and promote the formation of a B1-like cubic metastable oxide structure for the (Al,Cr)2O3 oxide. This formation may or may not be beneficial for the final application since literature indicates a slight stabilization of the metastable phase upon Si-incorporation, contrary to the effect of Cr, which stabilizes the α-phase. The thermal stability of alloys for metal cutting application is crucial for their use. Previous studies on another alloy system, Cr-Zr-O, had shown solid solution, for Cr-rich compositions in that material system, in the sought corundum structure. The thermal stability of α-Cr0.28Zr0.10O0.61 coating deposited by reactive radio frequency (RF)-magnetron sputtering at 500 °C was therefore investigated here after annealing in vacuum up to 870 °C. The annealed samples showed transformation of α-(Cr,Zr)2O3 and amorphous ZrOx-rich areas into tetragonal ZrO2 and bcc-Cr. The instability of the α-(Cr,Zr)2O3 is surprising and possibly related to the annealing being done under vacuum, facilitating the loss of oxygen. Further in situ synchrotron XRD annealing studies on the α-Cr0.28Zr0.10O0.61 coating in air and in vacuum showed increased stability for the air annealed sample up to at least 975 °C, accompanied with a slight increase in ex-situ measured nanohardness. The onset temperature for formation of tetragonal ZrO2 was similar to that for isothermally vacuum annealing. The synchrotron-vacuum annealed coating again decomposed into bcc-Cr and t-ZrO2, with an addition of monoclinic–ZrO2 due to grain growth. The stabilization of the room temperature metastable tetragonal ZrO2 phase, due to surface energy effects present with small grains sizes, may prove to be useful for metal cutting applications. The observed phase segregation of α-(Cr,Zr)2O3 and formation of tetragonal ZrO2 with corresponding increase in hardness for this pseudobinary oxide system also opens up design routes for pseudobinary oxides with tunable microstructural and mechanical properties.
Book Synopsis Active Protective Coatings by : Anthony E. Hughes
Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.
Book Synopsis Chemically Deposited Nanocrystalline Metal Oxide Thin Films by : Fabian I. Ezema
Download or read book Chemically Deposited Nanocrystalline Metal Oxide Thin Films written by Fabian I. Ezema and published by Springer Nature. This book was released on 2021-06-26 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book guides beginners in the areas of thin film preparation, characterization, and device making, while providing insight into these areas for experts. As chemically deposited metal oxides are currently gaining attention in development of devices such as solar cells, supercapacitors, batteries, sensors, etc., the book illustrates how the chemical deposition route is emerging as a relatively inexpensive, simple, and convenient solution for large area deposition. The advancement in the nanostructured materials for the development of devices is fully discussed.
Book Synopsis Advanced Coatings for Corrosion Protection by : Wolfram Fürbeth
Download or read book Advanced Coatings for Corrosion Protection written by Wolfram Fürbeth and published by MDPI. This book was released on 2021-01-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a significant issue in many industrial fields. Among other strategies, coatings are by far the most important technology for corrosion protection of metallic surfaces. The Special Issue “Advanced Coatings for Corrosion Protection” has been launched as a means to present recent developments in any type of advanced coating for corrosion protection. This book compiles 15 contributions on metallic, inorganic, polymeric and nanoparticle enhanced coatings that provide corrosion protection as well as other functionalities.
Book Synopsis Nanostructured Coatings by : Albano Cavaleiro
Download or read book Nanostructured Coatings written by Albano Cavaleiro and published by Springer Science & Business Media. This book was released on 2007-02-19 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.
Book Synopsis Metals Reference Book by : Colin James Smithells
Download or read book Metals Reference Book written by Colin James Smithells and published by . This book was released on 1967 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Multilayer Thin Films by : Sukumar Basu
Download or read book Multilayer Thin Films written by Sukumar Basu and published by BoD – Books on Demand. This book was released on 2020-01-15 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "Multilayer Thin Films-Versatile Applications for Materials Engineering", includes thirteen chapters related to the preparations, characterizations, and applications in the modern research of materials engineering. The evaluation of nanomaterials in the form of different shapes, sizes, and volumes needed for utilization in different kinds of gadgets and devices. Since the recently developed two-dimensional carbon materials are proving to be immensely important for new configurations in the miniature scale in the modern technology, it is imperative to innovate various atomic and molecular arrangements for the modifications of structural properties. Of late, graphene and graphene-related derivatives have been proven as the most versatile two-dimensional nanomaterials with superb mechanical, electrical, electronic, optical, and magnetic properties. To understand the in-depth technology, an effort has been made to explain the basics of nano dimensional materials. The importance of nano particles in various aspects of nano technology is clearly indicated. There is more than one chapter describing the use of nanomaterials as sensors. In this volume, an effort has been made to clarify the use of such materials from non-conductor to highly conducting species. It is expected that this book will be useful to the postgraduate and research students as this is a multidisciplinary subject.
Book Synopsis Metallic Coatings for Corrosion Control by : V. E. Carter
Download or read book Metallic Coatings for Corrosion Control written by V. E. Carter and published by . This book was released on 1977 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic Coatings for Corrosion Control describes how metal coatings can control corrosion, the selection process, preparations, suitability, limitations, and how coatings are applied. The book reviews the nature of corrosion, the forms of corrosion (even general, uneven general, even local, narrow pits, cracking), electrochemical mechanism of corrosion, effects of discontinuities in coatings, and economic considerations of coating. It describes pretreatments (such as removal of superficial corrosion, abrading, polishing), the coating processes (molten or spray application, chemical or vapor deposition, diffusion coating), and also coating performance. The rate of corrosion on different metals such as aluminum, cadmium, copper, gold, silver, or tin depends on the presence of an oxide film, solubility, electrodeposits, or tarnish blackening. Gold is resistant to corrosion and tarnishing except in aqua regia. The book recommends the following when the engineer is selecting a type of coating: the environment where it is exposed, the service life required, the substrate material, shape or size of the article, its decorative appeal, mechanical factors, and if there will be any subsequent fabrication. The book is useful for students of civil, structural, and mechanical engineering. Designers and technicians of industrial machinery or maritime equipment will also profit from reading it.
Book Synopsis High Temperature Coatings by : Sudhangshu Bose
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
