Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines

Download Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (115 download)

DOWNLOAD NOW!


Book Synopsis Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines by :

Download or read book Modeling and Control of Maximum Pressure Rise Rate in RCCI Engines written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Low Temperature Combustion (LTC) is a combustion strategy that burns fuel at lower temperatures and leaner mixtures in order to achieve high efficiency and near zero NOx emissions. Since the combustion happens at lower temperatures it inhibits the formation of NOx and soot emissions. One such strategy is Reactivity Controlled Compression Ignition (RCCI). One characteristic of RCCI combustion and LTC com- bustion in general is short burn durations which leads to high Pressure Rise Rates (PRR). This limits the operation of these engines to lower loads as at high loads, the Maximum Pressure Rise Rate (MPRR) hinders the use of this combustion strategy. This thesis focuses on the development of a model based controller that can control the Crank Angle for 50% mass fraction burn (CA50) and Indicated Mean Effective Pressure (IMEP) of an RCCI engine while limiting the MPRR to a pre determined limit. A Control Oriented Model (COM) is developed to predict the MPRR in an RCCI engine. This COM is then validated against experimental data. A statistical analysis of the experimental data is conducted to understand the accuracy of the COM. The results show that the COM is able to predict the MPRR with reasonable accuracy in steady state and transient conditions. Also, the COM is able to capture the trends during transient operation. This COM is then included in an existing cycle by cycle dynamic RCCI engine model and used to develop a Linear Parameter Varying (LPV) representation of an RCCI engine using Data Driven Modeling (DDM) approach with Support Vector Machines (SVM). This LPV representation is then used along with a Model Predictive Controller (MPC) to control the CA50 and IMEP of the RCCI engine model while limiting the MPRR. The controller was able to track the desired CA50 and IMEP with a mean error of 0.9 CAD and 4.7 KPa respectively while maintaining the MPRR below 5.8 bar/CAD.

Dynamic Modeling and Predictive Control of a Multi-Mode Combustion Engine

Download Dynamic Modeling and Predictive Control of a Multi-Mode Combustion Engine PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 0 pages
Book Rating : 4.:/5 (138 download)

DOWNLOAD NOW!


Book Synopsis Dynamic Modeling and Predictive Control of a Multi-Mode Combustion Engine by :

Download or read book Dynamic Modeling and Predictive Control of a Multi-Mode Combustion Engine written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Low temperature combustion (LTC) offers high thermal efficiency and low engine-out nitrogen oxides (NOx) and particulate matter (PM) emissions. Homogeneous charge compression ignition (HCCI), partially premixed charge compression ignition (PPCI) and reactivity-controlled compression ignition (RCCI) are the common LTC modes studied in this research. The primary barrier to implementing the LTC modes in on-road vehicles is their limited operating range due to high cyclic variability and excessive pressure rise rates. The feasible operating range of the LTC modes is only a subset of the speed-load range of the conventional spark ignition (SI) engine. Therefore, a multi-mode engine concept operating in one or more LTC modes and SI mode is a viable option to improve engine performance in terms of efficiency and emissions. The goal of this dissertation is to develop model-based closed loop control of an SI-RCCI-SI multi-mode engine. Control-oriented models and predictive controllers for HCCI, PPCI and RCCI modes are developed to simultaneously control combustion phasing and engine load for an optimal operation of a multi-mode engine. Cyclic variability in HCCI and RCCI modes are modeled using machine learning classification algorithms. Nonlinear model predictive controllers are developed for HCCI and RCCI modes to control combustion phasing and engine load while constraining cyclic variability below 3%. Furthermore, LTC engine operation faces challenges of excessive pressure rise rates that can damage the hardware. To this end, supervised machine learning classification algorithms are developed to model the heat release type which is used as a scheduling variable to develop data-driven model for an LTC engine. Model predictive controller is then developed to control combustion phasing and engine load while constraining maximum pressure rise rate below 8 bar/CAD. RCCI mode offers good control over the combustion event by modulating the start of injection timing of high reactivity fuel and adjusting the premixed ratio of the dual fuels. Therefore, this research focuses on SI-RCCI-SI multi-mode engine concept. The aim of this research is to achieve smooth SI-RCCI-SI mode switching operation at different engine loads and speed. A dynamic model for SI-RCCI-SI multi-mode engine is developed and validated for different transient conditions. The model includes the mode switching dynamics as well as actuator dynamics. A model-based predictive controller framework is developed for SI-RCCI-SI mode switching. The mode switching controller showed good performance during mode transitions and steady state engine operation. The controller is capable of tracking the desired combustion phasing and engine load during mode switching while maintaining $\lambda$ near stoichiometry in SI mode and constraining maximum pressure rise rate below 8 bar/CAD in RCCI mode.

High Power Output Operation of RCCI Combustion

Download High Power Output Operation of RCCI Combustion PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 219 pages
Book Rating : 4.:/5 (94 download)

DOWNLOAD NOW!


Book Synopsis High Power Output Operation of RCCI Combustion by :

Download or read book High Power Output Operation of RCCI Combustion written by and published by . This book was released on 2015 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: A computational investigation of methods to extend the upper limit of power output of reactivity controlled compression ignition (RCCI) engines was performed. The study utilized two approaches. The first approach is to increase the engine speed while maintaining a medium load. The second approach is to operate at higher loads without changing the engine speed. Iso-octane and n-heptane were used to represent the low-reactivity fuel and high-reactivity fuel, respectively. A light-duty diesel engine was modeled for the high speed dual-fuel RCCI combustion study. With high-speed operation several benefits were identified. Firstly, the peak pressure rise rates (PPRR), both crank angle-based and time-based, were reduced compared to those with low-speed operation. Secondly, at high speed the NO formation residence time became short, leading to reduced NOx emissions. Lastly, a frictional penalty analysis of high-speed operation using the Chen-Flynn model was conducted, which showed only 0.5 bar FMEP increase compared to that at low-speed. These findings indicate that high-speed RCCI is a very promising path for high-power output operation. For the high-load operation study use of dual direct-injectors was explored in order to direct-inject both fuels. Analysis of the optimum injection strategy revealed two main physical mechanisms enabling high-load operation with dual direct-injectors. The first exploited local evaporative cooling from the iso-octane injection, which delayed the iso-octane ignition. The second mechanism was related to the shorter chemical residence time of the iso-octane due to its late delivery into the cylinder. It was also noted that n-heptane's role as an ignition source could not be achieved with just iso-octane. Finally, the co-axial injector location assumption was removed by using an actual dual-injector layout. Unlike results with the co-axial injector design, the actual dual-injector layout exhibited soot and CO emission problems. In order to attempt to accommodate off-center injector locations, various injector hole patterns were tested. Although these unconventional injector hole patterns improved the emissions, it is concluded that the development of a co-axial dual-fuel injector is imperative in order to achieve clean RCCI combustion at high load.

Advanced Combustion for Sustainable Transport

Download Advanced Combustion for Sustainable Transport PDF Online Free

Author :
Publisher : Springer Nature
ISBN 13 : 9811684189
Total Pages : 367 pages
Book Rating : 4.8/5 (116 download)

DOWNLOAD NOW!


Book Synopsis Advanced Combustion for Sustainable Transport by : Avinash Kumar Agarwal

Download or read book Advanced Combustion for Sustainable Transport written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-12 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on advanced combustion technologies currently employed in internal combustion engines. It discusses different strategies for improving conventional diesel combustion. The volume includes chapters on low-temperature combustion techniques of compression-ignition engines which results in significant reduction of NOx and soot emissions. The content also highlights newly evolved gasoline compression technology and optical techniques in advanced gasoline direct injection engines. the research and its outcomes presented here highlight advancements in combustion technologies, analysing various issues related to in-cylinder combustion, pollutant formation and alternative fuels. This book will be of interest to those in academia and industry involved in fuels, IC engines, engine combustion research.

EXPERIMENTAL STUDY, MODELLING AND CONTROLLER DESIGN FOR AN RCCI ENGINE

Download EXPERIMENTAL STUDY, MODELLING AND CONTROLLER DESIGN FOR AN RCCI ENGINE PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (113 download)

DOWNLOAD NOW!


Book Synopsis EXPERIMENTAL STUDY, MODELLING AND CONTROLLER DESIGN FOR AN RCCI ENGINE by :

Download or read book EXPERIMENTAL STUDY, MODELLING AND CONTROLLER DESIGN FOR AN RCCI ENGINE written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Low Temperature Combustion (LTC) has got widespread attention over the past two decades in the field of Automotive Research and Development due to it's potential for achieving higher efficiencies with near-zero engine out NOx and soot emissions. Among all the LTC strategies Reactivity controlled compression ignition (RCCI) has shown the most promising results due to it's precise control over combustion phasing and heat release rate. However, RCCI being a dual-fuel stratified combustion, precise control over the injection timing of direct injected fuel and in-cylinder fuel reactivity of the mixture needs to be controlled effectively in order to achieve gross indicated thermal efficiencies as high as around 60%. This thesis focuses on developing real-time, model-based controller for controlling combustion phasing of an RCCI Engine. Optimum combustion phasing can be achieved by varying mixture reactivity and injection timing of higher reactive fuel. An experimental study was performed to study the effects of these variables on combustion phasing. Next,a mean-value and dynamic control-oriented model (COM) was developed to predict combustion phasing during steady-state and transient operating conditions. The validation results have shown that the COM was able to capture the experimental trends with minimal error. Next, for implementing in real time, a PI controller was developed using the COM to track the desired combustion phasing by adjusting duel-fuel premixed ratio and start of injection timing. The PI controller is then implemented on the engine plant. The validation results proved that the designed controller can follow the desired combustion phasing with an average error of 2 crank angle degrees and rise time of 3 engine cycles.

HCCI and CAI Engines for the Automotive Industry

Download HCCI and CAI Engines for the Automotive Industry PDF Online Free

Author :
Publisher : CRC Press
ISBN 13 :
Total Pages : 562 pages
Book Rating : 4.F/5 ( download)

DOWNLOAD NOW!


Book Synopsis HCCI and CAI Engines for the Automotive Industry by : Hua Zhao

Download or read book HCCI and CAI Engines for the Automotive Industry written by Hua Zhao and published by CRC Press. This book was released on 2007-09-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.

MODELING AND ANALYSIS OF REACTIVITY CONTROLLED COMPRESSION IGNITION (RCCI) COMBUSTION

Download MODELING AND ANALYSIS OF REACTIVITY CONTROLLED COMPRESSION IGNITION (RCCI) COMBUSTION PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (1 download)

DOWNLOAD NOW!


Book Synopsis MODELING AND ANALYSIS OF REACTIVITY CONTROLLED COMPRESSION IGNITION (RCCI) COMBUSTION by :

Download or read book MODELING AND ANALYSIS OF REACTIVITY CONTROLLED COMPRESSION IGNITION (RCCI) COMBUSTION written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last part, the effects of fuel injection system parameters on the performance and emissions characteristics of an RCCI engine are discussed. The injection system parameters include Premixed Ratio (PR), injection pressure, Start of Injection (SOI) timing and spray angle. The CFD model is then used to suggest an injection strategy capable of achieving optimized RCCI engine operation.

Automotive Fuels Reference Book

Download Automotive Fuels Reference Book PDF Online Free

Author :
Publisher : SAE International
ISBN 13 : 0768006384
Total Pages : 870 pages
Book Rating : 4.7/5 (68 download)

DOWNLOAD NOW!


Book Synopsis Automotive Fuels Reference Book by : Paul Richards

Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.

MODELLING AND CONTROL OF COMBUSTION PHASING OF AN RCCI ENGINE

Download MODELLING AND CONTROL OF COMBUSTION PHASING OF AN RCCI ENGINE PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 100 pages
Book Rating : 4.:/5 (994 download)

DOWNLOAD NOW!


Book Synopsis MODELLING AND CONTROL OF COMBUSTION PHASING OF AN RCCI ENGINE by : Kaveh Khodadadi Sadabadi

Download or read book MODELLING AND CONTROL OF COMBUSTION PHASING OF AN RCCI ENGINE written by Kaveh Khodadadi Sadabadi and published by . This book was released on 2015 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Natural Gas Engines

Download Natural Gas Engines PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 9811333076
Total Pages : 428 pages
Book Rating : 4.8/5 (113 download)

DOWNLOAD NOW!


Book Synopsis Natural Gas Engines by : Kalyan Kumar Srinivasan

Download or read book Natural Gas Engines written by Kalyan Kumar Srinivasan and published by Springer. This book was released on 2018-11-03 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced reciprocating combustion engine technologies that utilize natural gas and alternative fuels for transportation and power generation applications. It is divided into three major sections consisting of both fundamental and applied technologies to identify (but not limited to) clean, high-efficiency opportunities with natural gas fueling that have been developed through experimental protocols, numerical and high-performance computational simulations, and zero-dimensional, multizone combustion simulations. Particular emphasis is placed on statutes to monitor fine particulate emissions from tailpipe of engines operating on natural gas and alternative fuels.

DESIGN OF REAL-TIME COMBUSTION FEEDBACK SYSTEM AND EXPERIMENTAL STUDY OF AN RCCI ENGINE FOR CONTROL

Download DESIGN OF REAL-TIME COMBUSTION FEEDBACK SYSTEM AND EXPERIMENTAL STUDY OF AN RCCI ENGINE FOR CONTROL PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (113 download)

DOWNLOAD NOW!


Book Synopsis DESIGN OF REAL-TIME COMBUSTION FEEDBACK SYSTEM AND EXPERIMENTAL STUDY OF AN RCCI ENGINE FOR CONTROL by :

Download or read book DESIGN OF REAL-TIME COMBUSTION FEEDBACK SYSTEM AND EXPERIMENTAL STUDY OF AN RCCI ENGINE FOR CONTROL written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : Premixed compression ignition (PCI) technologies offer high efficiency and low emissions but are usually confined by limited operation range as well as high pressure rise and heat release rate. In this work, a more recently developed PCI mode is explored where in-cylinder blending of two fuels with different auto-ignition characteristics (diesel and gasoline) is utilized to create reactivity stratification such that heat release rate and combustion timing can be controlled. This mode has been defined as Reactivity Controlled Compression Ignition (RCCI). As part of this thesis, the main aim is to study various parameters that can be used to control combustion phasing. Also, steady state mapping of the engine is done so as to explore the operating range for the current engine setup. Best efficiencies as well as highest loads are obtained for higher Premixed Ratio (PR) values and advanced Start of Injection (SOI) timings, where as lower PR fuel blends are needed to achieve low load limit. The analysis is also extended to transient RCCI operation for observing various dynamics involved and their effects on combustion phasing. As part of realizing full-load range operation, switching to conventional Spark-Ignition (SI) combustion mode is also carried out. Various dynamics involved in the switching process are captured. A cycle-by-cycle closed loop combustion controller is designed and implemented on the engine to achieve optimum combustion phasing during transient engine operation. To provide feedback of combustion parameters like engine load and combustion phasing to the closed loop controller, a real-time combustion feedback system is designed and implemented utilizing Field Programmable Gate Array (FPGA).

Engine Modeling and Control

Download Engine Modeling and Control PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 9783662506295
Total Pages : 0 pages
Book Rating : 4.5/5 (62 download)

DOWNLOAD NOW!


Book Synopsis Engine Modeling and Control by : Rolf Isermann

Download or read book Engine Modeling and Control written by Rolf Isermann and published by Springer. This book was released on 2016-09-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demands for internal combustion engines with regard to fuel consumption, emissions and driveability lead to more actuators, sensors and complex control functions. A systematic implementation of the electronic control systems requires mathematical models from basic design through simulation to calibration. The book treats physically-based as well as models based experimentally on test benches for gasoline (spark ignition) and diesel (compression ignition) engines and uses them for the design of the different control functions. The main topics are: - Development steps for engine control - Stationary and dynamic experimental modeling - Physical models of intake, combustion, mechanical system, turbocharger, exhaust, cooling, lubrication, drive train - Engine control structures, hardware, software, actuators, sensors, fuel supply, injection system, camshaft - Engine control methods, static and dynamic feedforward and feedback control, calibration and optimization, HiL, RCP, control software development - Control of gasoline engines, control of air/fuel, ignition, knock, idle, coolant, adaptive control functions - Control of diesel engines, combustion models, air flow and exhaust recirculation control, combustion-pressure-based control (HCCI), optimization of feedforward and feedback control, smoke limitation and emission control This book is an introduction to electronic engine management with many practical examples, measurements and research results. It is aimed at advanced students of electrical, mechanical, mechatronic and control engineering and at practicing engineers in the field of combustion engine and automotive engineering.

Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles

Download Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles PDF Online Free

Author :
Publisher : National Academies Press
ISBN 13 : 0309373913
Total Pages : 812 pages
Book Rating : 4.3/5 (93 download)

DOWNLOAD NOW!


Book Synopsis Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles by : National Research Council

Download or read book Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Advances in Internal Combustion Engine Research

Download Advances in Internal Combustion Engine Research PDF Online Free

Author :
Publisher : Springer
ISBN 13 : 9811075751
Total Pages : 346 pages
Book Rating : 4.8/5 (11 download)

DOWNLOAD NOW!


Book Synopsis Advances in Internal Combustion Engine Research by : Dhananjay Kumar Srivastava

Download or read book Advances in Internal Combustion Engine Research written by Dhananjay Kumar Srivastava and published by Springer. This book was released on 2017-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses all aspects of advanced engine technologies, and describes the role of alternative fuels and solution-based modeling studies in meeting the increasingly higher standards of the automotive industry. By promoting research into more efficient and environment-friendly combustion technologies, it helps enable researchers to develop higher-power engines with lower fuel consumption, emissions, and noise levels. Over the course of 12 chapters, it covers research in areas such as homogeneous charge compression ignition (HCCI) combustion and control strategies, the use of alternative fuels and additives in combination with new combustion technology and novel approaches to recover the pumping loss in the spark ignition engine. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.

Improvement Trends for Internal Combustion Engines

Download Improvement Trends for Internal Combustion Engines PDF Online Free

Author :
Publisher : BoD – Books on Demand
ISBN 13 : 953513891X
Total Pages : 190 pages
Book Rating : 4.5/5 (351 download)

DOWNLOAD NOW!


Book Synopsis Improvement Trends for Internal Combustion Engines by : Bilge Albayrak Ceper

Download or read book Improvement Trends for Internal Combustion Engines written by Bilge Albayrak Ceper and published by BoD – Books on Demand. This book was released on 2018-03-21 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines have remained a challenge due to depending heavily on fossil fuels, which are already limited reserves, and a requirement for improvement in emission levels continuously. The number of advanced technologies such as hybrid systems and low-temperature combustion engines has been introduced, and a number of reports about the use of alternative fuels have been presented in recent years to overcome these challenges. The efforts have made the new concepts to be used in practical along with the new problems which are required advanced control systems. This book presents studies on internal combustion engines with alternative fuels and advanced combustion technologies to obtain efficiency and environment-friendly systems, measurement methodology of exhaust emissions and modelling of a hybrid engine system, and mechanical losses arising from ring-cylinder and ring-groove side contacts as well. The main theme here is to identify solutions for internal combustion engines in terms of fuel consumption, emissions, and performance.

Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance

Download Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance PDF Online Free

Author :
Publisher : Woodhead Publishing
ISBN 13 : 0323900283
Total Pages : 800 pages
Book Rating : 4.3/5 (239 download)

DOWNLOAD NOW!


Book Synopsis Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance by : Richard Folkson

Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Woodhead Publishing. This book was released on 2022-07-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. - Provides a fully updated reference with significant technological advances and developments in the sector - Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements - Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry

SI Combustion

Download SI Combustion PDF Online Free

Author :
Publisher :
ISBN 13 : 9780768011661
Total Pages : 0 pages
Book Rating : 4.0/5 (116 download)

DOWNLOAD NOW!


Book Synopsis SI Combustion by :

Download or read book SI Combustion written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: