Micromachining Using Electrochemical Discharge Phenomenon

Download Micromachining Using Electrochemical Discharge Phenomenon full books in PDF, epub, and Kindle. Read online Micromachining Using Electrochemical Discharge Phenomenon ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Micromachining Using Electrochemical Discharge Phenomenon

Author : Rolf Wuthrich
Publisher : William Andrew
ISBN 13 : 0323265642
Total Pages : 218 pages
Book Rating : 4.3/5 (232 download)

DOWNLOAD NOW!

Book Synopsis Micromachining Using Electrochemical Discharge Phenomenon by : Rolf Wuthrich

Download or read book Micromachining Using Electrochemical Discharge Phenomenon written by Rolf Wuthrich and published by William Andrew. This book was released on 2014-11-08 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-machining is an advanced manufacturing technique of growing importance, and adoption of micro-machining using electrochemical discharges (Micro-ECDM) has increased steadily in recent years. Among new developments is the interest of industry in Micro-ECDM. However, the potential of the technology is not being fully utilized and there is no comprehensive reference book available today covering it. Micromachining Using Electrochemical Discharge Phenomenon, Second Edition fills this gap. It is unique in its detailed coverage of all aspects of the Micro-ECDM process, as well as Spark Assisted Chemical Engraving (SACE). As such, it covers technologies such as chemical etching, micro-drilling, and other material removal mechanisms, high aspect ratio machining, design and construction of the machining apparatus, and a wide range of applications. The new edition compares Micro-ECDM and SACE with other micromachining technologies such as laser machining and traditional EDM. ECDM is used for machining of electrically non-conductive materials. Micro-ECDM/SACE is mainly applied to glass and the book focuses on glass, but the authors also present new results on other materials such as ceramics. In addition, techniques to modify material properties for the machining process are explained. The authors discuss machining strategies including the latest developments in micro-texturing of glass micro-channels and reports on developments in controlling and analysis aspects of machining. This book is a unique reference for engineers and industrial researchers involved in development, design and use of micromachining, chemical micro-drilling or chemical engraving techniques and equipment. Only all-encompassing reference coving Micro-ECDM and SACE available on the market Covers a wide range of applications, including applications in the MEMS industry and the Medical Devices and Medical Diagnostics industries New edition includes expanded sections on comparing Micro-ECDM/SACE with other micromachining technologies

Micromachining Using Electrochemical Discharge Phenomenon

Author : Rolf Wüthrich
Publisher : William Andrew Pub
ISBN 13 : 9780815515876
Total Pages : 181 pages
Book Rating : 4.5/5 (158 download)

DOWNLOAD NOW!

Book Synopsis Micromachining Using Electrochemical Discharge Phenomenon by : Rolf Wüthrich

Download or read book Micromachining Using Electrochemical Discharge Phenomenon written by Rolf Wüthrich and published by William Andrew Pub. This book was released on 2009 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an unconventional and largely unknown technology, which is able to micro-machine at relatively low cost glass, polymers and other materials. This process is called Spark Assisted Chemical Engraving (SACE), or Electro Chemical Discharge Machining (ECDM). First presented in 1968 in Japan by Kurafuji and Suda, this technology was studied essentially in the academic world and mainly applied for micro-fluidic devices. This book explains the fundamentals of SACE, promotes the technology, and encourages researchers and engineers from industry to use it for their specific applications. Therefore, the book, after presenting in details the fundaments of SACE (in particular the Electrochemical Discharges), deals mainly with practical aspects of implementing the machining technology. The book is written so that researchers from fields other than micro-technology (e.g., from life science) will be able to build a simple machining set-up, together with his mechanical work-shop, for individual needs. Topics include: micro- and electrochemical discharge machining (including glass), microfluidics, non-conventional manufacturing, electrochemical discharges, biocompatibility, and anode effects Provides applicable information for engineers in industry dealing with micromachining of glass, polymers, and ceramics Covers a range of microfluidic devices (including micro-TAS) with applications in various fields like chemistry and life sciences

Micromachining Using Electrochemical Discharge Phenomenon

Author : Rolf Wuthrich
Publisher : Elsevier
ISBN 13 : 0815519834
Total Pages : 197 pages
Book Rating : 4.8/5 (155 download)

DOWNLOAD NOW!

Book Synopsis Micromachining Using Electrochemical Discharge Phenomenon by : Rolf Wuthrich

Download or read book Micromachining Using Electrochemical Discharge Phenomenon written by Rolf Wuthrich and published by Elsevier. This book was released on 2009-07-30 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the fundamentals of SACE, promotes the technology, and encourages researchers and engineers from industry to use it for their specific applications. Therefore, the book, after presenting in details the fundaments of SACE (in particular the Electrochemical Discharges), deals mainly with practical aspects of implementing the machining technology. The book is written so that researchers from fields other than micro-technology (e.g., from life science) will be able to build a simple machining set-up, together with his mechanical work-shop, for individual needs. Topics include: micro- and electrochemical discharge machining (including glass), microfluidics, non-conventional manufacturing, electrochemical discharges, biocompatibility, and anode effects Provides applicable information for engineers in industry dealing with micromachining of glass, polymers, and ceramics Covers a range of microfluidic devices (including micro-TAS) with applications in various fields like chemistry and life sciences

Micro-electrical Discharge Machining Processes

Author : Golam Kibria
Publisher : Springer
ISBN 13 : 9811330743
Total Pages : 314 pages
Book Rating : 4.8/5 (113 download)

DOWNLOAD NOW!

Book Synopsis Micro-electrical Discharge Machining Processes by : Golam Kibria

Download or read book Micro-electrical Discharge Machining Processes written by Golam Kibria and published by Springer. This book was released on 2018-12-15 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.

Non-traditional Micromachining Processes

Author : Golam Kibria
Publisher : Springer
ISBN 13 : 3319520091
Total Pages : 422 pages
Book Rating : 4.3/5 (195 download)

DOWNLOAD NOW!

Book Synopsis Non-traditional Micromachining Processes by : Golam Kibria

Download or read book Non-traditional Micromachining Processes written by Golam Kibria and published by Springer. This book was released on 2017-03-07 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete coverage of micromachining processes from their basic material removal phenomena to past and recent research carried by a number of researchers worldwide. Chapters on effective utilization of material resources, improved efficiency, reliability, durability, and cost effectiveness of the products are presented. This book provides the reader with new and recent developments in the field of micromachining and microfabrication of engineering materials.

Hybrid Micromachining and Microfabrication Technologies

Author : Sandip Kunar
Publisher : John Wiley & Sons
ISBN 13 : 1394174934
Total Pages : 340 pages
Book Rating : 4.3/5 (941 download)

DOWNLOAD NOW!

Book Synopsis Hybrid Micromachining and Microfabrication Technologies by : Sandip Kunar

Download or read book Hybrid Micromachining and Microfabrication Technologies written by Sandip Kunar and published by John Wiley & Sons. This book was released on 2023-05-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: HYBRID MICROMACHINING and MICROFABRICATION TECHNOLOGIES The book aims to provide a thorough understanding of numerous advanced hybrid micromachining and microfabrication techniques as well as future directions, providing researchers and engineers who work in hybrid micromachining with a much-appreciated orientation. The book is dedicated to advanced hybrid micromachining and microfabrication technologies by detailing principals, techniques, processes, conditions, research advances, research challenges, and opportunities for various types of advanced hybrid micromachining and microfabrication. It discusses the mechanisms of material removal supported by experimental validation. Constructional features of hybrid micromachining setup suitable for industrial micromachining applications are explained. Separate chapters are devoted to different advanced hybrid micromachining and microfabrication to design and development of micro-tools, which is one of the most vital components in advanced hybrid micromachining, and which can also be used for various micro and nano applications. Power supply, and other major factors which influence advanced hybrid micromachining processes, are covered and research findings concerning the improvement of machining accuracy and efficiency are reported.

Hybrid Machining Processes

Author : Kapil Gupta
Publisher : Springer
ISBN 13 : 3319259229
Total Pages : 68 pages
Book Rating : 4.3/5 (192 download)

DOWNLOAD NOW!

Book Synopsis Hybrid Machining Processes by : Kapil Gupta

Download or read book Hybrid Machining Processes written by Kapil Gupta and published by Springer. This book was released on 2015-11-07 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes various hybrid machining and finishing processes. It gives a critical review of the past work based on them as well as the current trends and research directions. For each hybrid machining process presented, the authors list the method of material removal, machining system, process variables and applications. This book provides a deep understanding of the need, application and mechanism of hybrid machining processes.

Electric Discharge Hybrid-Machining Processes

Author : Basil Kuriachen
Publisher : CRC Press
ISBN 13 : 1000517802
Total Pages : 373 pages
Book Rating : 4.0/5 (5 download)

DOWNLOAD NOW!

Book Synopsis Electric Discharge Hybrid-Machining Processes by : Basil Kuriachen

Download or read book Electric Discharge Hybrid-Machining Processes written by Basil Kuriachen and published by CRC Press. This book was released on 2022-03-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the knowledge and insight into the fundamental aspects of Electric Discharge Machining (EDM) processes and various hybrid machining technologies derived to improve the machining efficiencies. Fundamental theory of material removal, recent research trends and future research directions have been covered in each chapter. After explaining EDM, Dry and Near-dry EDM processes, Electrochemical Spark Machining, Arc Machining processes, Electric Discharge Hybrid-Turning processes, Electrical Discharge Grinding, Electric Discharge Milling, and various assisted EDM processes have been discussed. Finally, modeling and simulation of hybrid machining processes are also included. The book reflects the recent developments and trends in electric discharge hybrid machining processes. It covers in detail the basics of EDM, various hybrid and assistive technologies in EDM. It includes the updated discussion on the significance of process parameters in various hybrid EDM processes. An overview of modelling and simulation of hybrid EDM process is provided. This book is aimed at Graduate students, researchers in manufacturing engineering, production engineering, and materials engineering.

Machining—Recent Advances, Applications and Challenges

Author : Luis Norberto L´opez de Lacalle
Publisher : MDPI
ISBN 13 : 3039213776
Total Pages : 554 pages
Book Rating : 4.0/5 (392 download)

DOWNLOAD NOW!

Book Synopsis Machining—Recent Advances, Applications and Challenges by : Luis Norberto L´opez de Lacalle

Download or read book Machining—Recent Advances, Applications and Challenges written by Luis Norberto L´opez de Lacalle and published by MDPI. This book was released on 2019-08-26 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.

Advances in Manufacturing Processes

Author : Harshit K. Dave
Publisher : Springer Nature
ISBN 13 : 9811591172
Total Pages : 431 pages
Book Rating : 4.8/5 (115 download)

DOWNLOAD NOW!

Book Synopsis Advances in Manufacturing Processes by : Harshit K. Dave

Download or read book Advances in Manufacturing Processes written by Harshit K. Dave and published by Springer Nature. This book was released on 2020-11-30 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Recent Advances in Manufacturing (RAM 2020). This volume, in particular, provides insights into current research trends and opportunities within the manufacturing processes domain such as conventional and unconventional manufacturing, micro and nano manufacturing, chemical and biochemical manufacturing, and computer-integrated manufacturing (CIM). The topics covered include emerging areas of the fourth industrial revolution such as additive manufacturing, sustainable and energy-efficient manufacturing, smart manufacturing, artificial intelligence in manufacturing application, and computer-integrated manufacturing. This book will be useful for to researchers and practitioners alike.

Hybrid Machining

Author : Xichun Luo
Publisher : Academic Press
ISBN 13 : 0128131136
Total Pages : 326 pages
Book Rating : 4.1/5 (281 download)

DOWNLOAD NOW!

Book Synopsis Hybrid Machining by : Xichun Luo

Download or read book Hybrid Machining written by Xichun Luo and published by Academic Press. This book was released on 2018-06-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Machining: Theory, Methods, and Case Studies covers the scientific fundamentals, techniques, applications and real-world descriptions of emerging hybrid machining technology. This field is advancing rapidly in industrial and academic contexts, creating a great need for the fundamental and technical guidance that this book provides. The book includes discussions of basic concepts, process design principles, standard hybrid machining processes, multi-scale modeling approaches, design, on-machine metrology and work handling systems. Readers interested in manufacturing systems, product design or machining technology will find this one-stop guide to hybrid machining the ideal reference. Includes tables of recommended processing parameters for key engineering materials/products for each hybrid machining process Provides case studies covering real industrial applications Explains how to use multiscale modeling for hybrid machining

Advances in Manufacturing Processes

Author : K. S. Vijay Sekar
Publisher : Springer
ISBN 13 : 9811317240
Total Pages : 670 pages
Book Rating : 4.8/5 (113 download)

DOWNLOAD NOW!

Book Synopsis Advances in Manufacturing Processes by : K. S. Vijay Sekar

Download or read book Advances in Manufacturing Processes written by K. S. Vijay Sekar and published by Springer. This book was released on 2018-09-10 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM 2018). It discusses innovative manufacturing processes, such as rapid prototyping, nontraditional machining, advanced computer numerical control (CNC) machining, and advanced metal forming. The book particularly focuses on finite element simulation and optimization, which aid in reducing experimental costs and time. This book is a valuable resource for students, researchers, and professionals alike.

Emerging Trends in Mechanical and Industrial Engineering

Author : Xianguo Li
Publisher : Springer Nature
ISBN 13 : 9811969450
Total Pages : 1062 pages
Book Rating : 4.8/5 (119 download)

DOWNLOAD NOW!

Book Synopsis Emerging Trends in Mechanical and Industrial Engineering by : Xianguo Li

Download or read book Emerging Trends in Mechanical and Industrial Engineering written by Xianguo Li and published by Springer Nature. This book was released on 2023-01-01 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the select proceedings of the International Conference on Emerging Trends in Mechanical and Industrial Engineering (ICETMIE 2022). It covers the latest trends in the area of mechanical engineering. The broad topics covered in the book are engineering design, industrial and production engineering, Industry 4.0, energy and process engineering, mechatronics, control and robotics, material science, and automotive engineering. The book is useful for students, researchers, and professionals working in the various areas of mechanical engineering.

Advanced Machining Science

Author : Vijay Kumar Jain
Publisher : CRC Press
ISBN 13 : 1482211106
Total Pages : 600 pages
Book Rating : 4.4/5 (822 download)

DOWNLOAD NOW!

Book Synopsis Advanced Machining Science by : Vijay Kumar Jain

Download or read book Advanced Machining Science written by Vijay Kumar Jain and published by CRC Press. This book was released on 2022-09-30 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: As machining processes become more advanced, so does the science behind them. This book emphasizes these scientific developments in addition to the more widely covered technological aspects, providing a full understanding of how machining has adapted to material constraints and moved beyond conventional methods in recent years. Numerous processes have been developed to allow the use of increasingly tough, corrosion-resistant, and temperature-resistant materials in machining. The advanced machining processes covered in this book range from mechanical, thermoelectric, and electrochemical, including abrasive water jet machining, electric discharge machining and micromachining, ion beam machining, and hybrid processes. It also addresses the sustainability issues raised by these processes. The underlying science of machining is centered throughout, as none of these processes can reach their full potential without both technical expertise and scientific understanding. Advanced Machining Science and its scientific approach will be of particular interest to students, researchers, and shop floor engineers.

Manufacturing and Processing of Advanced Materials

Author : Amar Patnaik, Albano Cavaleiro, Malay Kumar Banerjee, Ernst Kozeschnik, Vikas Kukshal
Publisher : Bentham Science Publishers
ISBN 13 : 9815136720
Total Pages : 318 pages
Book Rating : 4.8/5 (151 download)

DOWNLOAD NOW!

Book Synopsis Manufacturing and Processing of Advanced Materials by : Amar Patnaik, Albano Cavaleiro, Malay Kumar Banerjee, Ernst Kozeschnik, Vikas Kukshal

Download or read book Manufacturing and Processing of Advanced Materials written by Amar Patnaik, Albano Cavaleiro, Malay Kumar Banerjee, Ernst Kozeschnik, Vikas Kukshal and published by Bentham Science Publishers. This book was released on 2023-12-14 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the world of advanced materials and their manufacturing processes through this authoritative and enlightening reference. Discover how these innovations are shaping the future of high-tech industries and making a profound impact on our world. Manufacturing and Processing of Advanced Materials compiles current research and updates on development efforts in advanced materials, manufacturing, and their engineering applications. The book presents 22 peer-reviewed chapters that cover new materials and manufacturing processes. Key Topics Materials for the Future: Properties, classifications, and harmful effects of advanced engineering Innovative Manufacturing Techniques: Nanotechnology in material processing and manufacturing innovation. Advanced Welding and Joining: laser welding and friction stir welding in manufacturing composite materials. Sustainable Practices: Eco-Friendly machining, water vapor cutting fluid, for high-speed milling, natural fiber reinforcement with materials like bamboo leaves. Advanced Materials Characterization and Modeling: Carbon nanotube (CNT)-reinforced nanocomposites and tribology for durable and reliable materials ensuring reliability. Materials for Energy and Electronics: Energy Storage Innovations and smart materials for electronic devices Novel Drilling and Machining Processes: Microwave drilling, electric discharge machining and die-sinking electric discharge machining for metal matrix composites. Innovations in Nanoparticle Production: Spark discharge method (SDM) for advanced nanoparticle production. The book caters to a diverse audience, offering an invaluable resource for researchers, engineers, graduate students, and professionals in materials science, engineering, chemistry, and physics. By enhancing their knowledge and expertise, readers are poised to become key contributors to various industries and technological advancements.

Modern Hybrid Machining and Super Finishing Processes

Author : Ankit Sharma
Publisher : CRC Press
ISBN 13 : 1040022782
Total Pages : 201 pages
Book Rating : 4.0/5 (4 download)

DOWNLOAD NOW!

Book Synopsis Modern Hybrid Machining and Super Finishing Processes by : Ankit Sharma

Download or read book Modern Hybrid Machining and Super Finishing Processes written by Ankit Sharma and published by CRC Press. This book was released on 2024-06-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the recent breakthroughs in subtractive manufacturing and difficult-to-machine, material-based, modern machining techniques. It illustrates various combinations of hybrid machining and super finishing, and outlines the critical area profile accuracy, high-precision machining, high tolerance, surface quality, chipping, and cracking for converting into new applications. Modern Hybrid Machining and Super Finishing Processes: Technology and Applications provides scientific and technological insights on subtractive manufacturing routes. It covers a wide range of micromachining parts, electronic components, metrological devices, and biomedical instruments on materials such as titanium, stainless steel, high-strength temperature-resistant alloys, fiber-reinforced composites, and ceramics, refractories, and other difficult-to-machine alloys. The book emphasizes machined surface accuracy and quality of surface, productivity, and automatization. It also covers creating complex, intricate, and complicated shapes for difficult-to-machine materials. The book goes on to offer an investigation on electrochemical discharge machining, abrasive-based nano-finishing, and rotary ultrasonic machining-based parametric combination, as well as discuss the latest trends in hybrid machining combined processes. This book is a firsthand reference for commercial organizations mimicking modern hybrid machining processes by targeting difficult-to-machine, materials-based applications. By capturing the current trends of today’s manufacturing practices, this book becomes a one-stop resource for scholars, manufacturing professionals, engineers, and academic researchers.

Micro Electro-fabrication

Author : Tanveer Saleh
Publisher : Elsevier
ISBN 13 : 0128231807
Total Pages : 413 pages
Book Rating : 4.1/5 (282 download)

DOWNLOAD NOW!

Book Synopsis Micro Electro-fabrication by : Tanveer Saleh

Download or read book Micro Electro-fabrication written by Tanveer Saleh and published by Elsevier. This book was released on 2021-05-14 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro-fabrication outlines three major nanoscale electro-fabrication techniques, including electro-discharge machining, electrochemical machining and electrochemical deposition. Applications covered include the fabrication of nozzles for automobiles, miniature hole machining for aerospace turbine blade cooling, biomedical device fabrication, such as stents, the fabrication of microchannels for microfluidic application, the production of various MEMS devices, rapid prototyping of micro components, and nanoelectrode fabrication for scanning electron microscopy. This comprehensive book discusses the fundamental nature of the various electro-fabrication processes as well as mathematical modelling and applications. It is an important reference for materials scientists and engineers working at the nanoscale. Provides state-of-the-art research investigations on various topics of micro/nano EDM, micro LECD, micro/nano ECM and ECDM techniques Compares a variety of electro-fabrication techniques, outlining which is best in different situations Outlines a variety of modeling and optimization techniques relating to micro/nano EDM, micro LECD, micro/nano ECM and ECDM