Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Download Measurement And Analysis Of Gas Turbine Blade Tip Heat Transfer And Film Cooling full books in PDF, epub, and Kindle. Read online Measurement And Analysis Of Gas Turbine Blade Tip Heat Transfer And Film Cooling ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author : Jae Su Kwak
Publisher :
ISBN 13 :
Total Pages : 266 pages
Book Rating : 4.:/5 (519 download)
Download or read book Measurement and Analysis of Gas Turbine Blade Tip Heat Transfer and Film Cooling written by Jae Su Kwak and published by . This book was released on 2002 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Je-Chin Han
Publisher : CRC Press
ISBN 13 : 1439855684
Total Pages : 892 pages
Book Rating : 4.4/5 (398 download)
Download or read book Gas Turbine Heat Transfer and Cooling Technology, Second Edition written by Je-Chin Han and published by CRC Press. This book was released on 2012-11-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference for engineers and researchers, Gas Turbine Heat Transfer and Cooling Technology, Second Edition has been completely revised and updated to reflect advances in the field made during the past ten years. The second edition retains the format that made the first edition so popular and adds new information mainly based on selected published papers in the open literature. See What’s New in the Second Edition: State-of-the-art cooling technologies such as advanced turbine blade film cooling and internal cooling Modern experimental methods for gas turbine heat transfer and cooling research Advanced computational models for gas turbine heat transfer and cooling performance predictions Suggestions for future research in this critical technology The book discusses the need for turbine cooling, gas turbine heat-transfer problems, and cooling methodology and covers turbine rotor and stator heat-transfer issues, including endwall and blade tip regions under engine conditions, as well as under simulated engine conditions. It then examines turbine rotor and stator blade film cooling and discusses the unsteady high free-stream turbulence effect on simulated cascade airfoils. From here, the book explores impingement cooling, rib-turbulent cooling, pin-fin cooling, and compound and new cooling techniques. It also highlights the effect of rotation on rotor coolant passage heat transfer. Coverage of experimental methods includes heat-transfer and mass-transfer techniques, liquid crystal thermography, optical techniques, as well as flow and thermal measurement techniques. The book concludes with discussions of governing equations and turbulence models and their applications for predicting turbine blade heat transfer and film cooling, and turbine blade internal cooling.
Author : Dean Andrew Ward
Publisher :
ISBN 13 :
Total Pages : 332 pages
Book Rating : 4.:/5 (282 download)
Download or read book Turbine Blade Tip Film Cooling Measurements written by Dean Andrew Ward and published by . This book was released on 1992 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Ali A. Ameri
Publisher :
ISBN 13 :
Total Pages : 14 pages
Book Rating : 4.:/5 (317 download)
Download or read book A Numerical Analysis of Heat Transfer and Effectiveness on Film Cooled Turbine Blade Tip Models written by Ali A. Ameri and published by . This book was released on 1999 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Chaitanya D Ghodke
Publisher : SAE International
ISBN 13 : 0768095026
Total Pages : 238 pages
Book Rating : 4.7/5 (68 download)
Download or read book Gas Turbine Blade Cooling written by Chaitanya D Ghodke and published by SAE International. This book was released on 2018-12-10 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas turbines play an extremely important role in fulfilling a variety of power needs and are mainly used for power generation and propulsion applications. The performance and efficiency of gas turbine engines are to a large extent dependent on turbine rotor inlet temperatures: typically, the hotter the better. In gas turbines, the combustion temperature and the fuel efficiency are limited by the heat transfer properties of the turbine blades. However, in pushing the limits of hot gas temperatures while preventing the melting of blade components in high-pressure turbines, the use of effective cooling technologies is critical. Increasing the turbine inlet temperature also increases heat transferred to the turbine blade, and it is possible that the operating temperature could reach far above permissible metal temperature. In such cases, insufficient cooling of turbine blades results in excessive thermal stress on the blades causing premature blade failure. This may bring hazards to the engine's safe operation. Gas Turbine Blade Cooling, edited by Dr. Chaitanya D. Ghodke, offers 10 handpicked SAE International's technical papers, which identify key aspects of turbine blade cooling and help readers understand how this process can improve the performance of turbine hardware.
Author :
Publisher :
ISBN 13 :
Total Pages : 0 pages
Book Rating : 4.:/5 (946 download)
Download or read book Measurements of Local Heat Transfer Coefficient and Film Cooling Effectiveness in Turbine Blade Tip Geometries written by and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report results from a contract tasking Imperial College of Science. Technology and Medicine as follows: The project will involve the quantification of the flow and surface characteristics of turbine blade tip cooling geometry with velocity and turbulence distributions relevant to the gas turbine designer. The experimental program will provide measurements of the film cooling adiabatic effectiveness and heat transfer coefficient in a simulated blade tip. with injection from the pressure surface side near the tip. The program will be progressive and interactive. starting with a single row of film cooling holes with injection from the pressure surface side near the tip. moving towards other representative injection configurations: slot injection on the tip surface and groove-tip geometry. The project will supply validation data for the 3D Navier-Stokes solver Glenn-HT. currently used by NASA. and it will also provide insight into the performance of advanced cooling geometry configurations. The experiments will make use of liquid crystal thermography to obtain the heat transfer data. The data acquisition method corresponds to the steady-state technique with the use of wide band liquid crystals. It requires a reduced number of experiments when compared with narrow band crystals and thermocouples, and provides a high degree of spatial resolution and reduced uncertainty level. It will be accompanied by data from small-diameter thermocouples. hot wires and pressure transducers.
Author : Jack B. Esgar
Publisher :
ISBN 13 :
Total Pages : 44 pages
Book Rating : 4.3/5 (91 download)
Download or read book Effect of Chord Size on Weight and Cooling Characteristics of Air-cooled Turbine Blades written by Jack B. Esgar and published by . This book was released on 1957 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analysis has been made to determine the effect of chord size on the weight and cooling characteristics of shell-supported, air-cooled gas-turbine blades. In uncooled turbines with solid blades, the general practice has been to design turbines with high aspect ratio (small blade chord) to achieve substantial turbine weight reduction. With air-cooled blades, this study shows that turbine blade weight is affected to a much smaller degree by the size of the blade chord.
Author : Bengt Sundén
Publisher : Witpress
ISBN 13 :
Total Pages : 544 pages
Book Rating : 4.3/5 (91 download)
Download or read book Heat Transfer in Gas Turbines written by Bengt Sundén and published by Witpress. This book was released on 2001 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title presents and reflects current active research on various heat transfer topics and related phenomena in gas turbine systems. It begins with a general introduction to gas turbine heat transfer, before moving on to specific areas.
Author : Diganta P. Narzary
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (688 download)
Download or read book Experimental Study of Gas Turbine Blade Film Cooling and Heat Transfer written by Diganta P. Narzary and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern gas turbine engines require higher turbine-entry gas temperature to improve their thermal efficiency and thereby their performance. A major accompanying concern is the heat-up of the turbine components which are already subject to high thermal and mechanical stresses. This heat-up can be reduced by: (i) applying thermal barrier coating (TBC) on the surface, and (ii) providing coolant to the surface by injecting secondary air discharged from the compressor. However, as the bleeding off of compressor discharge air exacts a penalty on engine performance, the cooling functions must be accomplished with the smallest possible secondary air injection. This necessitates a detailed and systematic study of the various flow and geometrical parameters that may have a bearing on the cooling pattern. In the present study, experiments were performed in three regions of a non-rotating gas turbine blade cascade: blade platform, blade span, and blade tip. The blade platform and blade span studies were carried out on a high pressure turbine rotor blade cascade in medium flow conditions. Film-cooling effectiveness or degree of cooling was assessed in terms of cooling hole geometry, blowing ratio, freestream turbulence, coolant-to-mainstream density ratio, purge flow rate, upstream vortex for blade platform cooling and blowing ratio, and upstream vortex for blade span cooling. The blade tip study was performed in a blow-down flow loop in a transonic flow environment. The degree of cooling was assessed in terms of blowing ratio and tip clearance. Limited heat transfer coefficient measurements were also carried out. Mainstream pressure loss was also measured for blade platform and blade tip film-cooling with the help of pitot-static probes. The pressure sensitive paint (PSP) and temperature sensitive paint (TSP) techniques were used for measuring film-cooling effectiveness whereas for heat transfer coefficient measurement, temperature sensitive paint (TSP) technique was employed. Results indicated that the blade platform cooling requires a combination of upstream purge flow and downstream discrete film-cooling holes to cool the entire platform. The shaped cooling holes provided wider film coverage and higher film-cooling effectiveness than the cylindrical holes while also creating lesser mainstream pressure losses. Higher coolant-to-mainstream density ratio resulted in higher effectiveness levels from the cooling holes. On the blade span, at any given blowing ratio, the suction side showed better coolant coverage than the pressure side even though the former had two fewer rows of holes. Film-cooling effectiveness increased with blowing ratio on both sides of the blade. Whereas the pressure side effectiveness continued to increase with blowing ratio, the increase in suction side effectiveness slowed down at higher blowing ratios (M=0.9 and 1.2). Upstream wake had a detrimental effect on film coverage. 0% and 25% wake phase positions significantly decreased film-cooling effectiveness magnitude. Comparison between the compound shaped hole and the compound cylindrical hole design showed higher effectiveness values for shaped holes on the suction side. The cylindrical holes performed marginally better in the curved portion of the pressure side. Finally, the concept tip proved to be better than the baseline tip in terms of reducing mainstream flow leakage and mainstream pressure loss. The film-cooling effectiveness on the concept blade increased with increasing blowing ratio and tip gap. However, the film-coverage on the leading tip portion was almost negligible.
Author : Gregory Kramer
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (15 download)
Download or read book Gas Turbine Blade Tip and Near Tip Heat Transfer with Film Cooling written by Gregory Kramer and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Ernst Rudolf Georg Eckert
Publisher :
ISBN 13 :
Total Pages : 44 pages
Book Rating : 4.3/5 (126 download)
Download or read book Survey of Advantages and Problems Associated with Transpiration Cooling and Film Cooling of Gas-turbine Blades written by Ernst Rudolf Georg Eckert and published by . This book was released on 1951 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: Transpiration and film cooling promise to be effective methods of cooling gas-turbine blades; consequently, analytical and experimental investigations are being conducted to obtain a better understanding of these processes. This report serves as an introduction to these cooling methods, explains the physical processes, and surveys the information available for predicting blade temperatures and heat-transfer rates. In addition, the difficulties encountered in obtaining a uniform blade temperature are discussed, and the possibilities of correcting these difficulties are indicated. Air is the only coolant considered in the application of these cooling methods.
Author : Shuye Teng
Publisher :
ISBN 13 :
Total Pages : 224 pages
Book Rating : 4.:/5 (464 download)
Download or read book Gas Turbine Blade Film Cooling and Blade Tip Heat Transfer written by Shuye Teng and published by . This book was released on 2000 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Shantanu Mhetras
Publisher :
ISBN 13 :
Total Pages : pages
Book Rating : 4.:/5 (69 download)
Download or read book Experimental Study of Gas Turbine Blade Film Cooling and Internal Turbulated Heat Transfer at Large Reynolds Numbers written by Shantanu Mhetras and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Film cooling effectiveness on a gas turbine blade tip on the near tip pressure side and on the squealer cavity floor is investigated. Optimal arrangement of film cooling holes, effect of a full squealer and a cutback squealer, varying blowing ratios and squealer cavity depth are also examined on film cooling effectiveness. The film-cooling effectiveness distributions are measured on the blade tip, near tip pressure side and the inner pressure and suction side rim walls using a Pressure Sensitive Paint (PSP) technique. A blowing ratio of 1.0 is found to give best results on the pressure side whereas the other tip surfaces give best results for blowing ratios of 2. Film cooling effectiveness tests are also performed on the span of a fully-cooled high pressure turbine blade in a 5 bladed linear cascade using the PSP technique. Film cooling effectiveness over the entire blade region is determined from full coverage film cooling, showerhead cooling and from each individual row with and without an upstream wake. The effect of superposition of film cooling effectiveness from each individual row is then compared with full coverage film cooling. Results show that an upstream wake can result in lower film cooling effectiveness on the blade. Effectiveness magnitudes from superposition of effectiveness data from individual rows are comparable with that from full coverage film cooling. Internal heat transfer measurements are also performed in a high aspect ratio channel and from jet array impingement on a turbulated target wall at large Reynolds numbers. For the channel, three dimple and one discrete rib configurations are tested on one of the wide walls for Reynolds numbers up to 1.3 million. The presence of a turbulated wall and its effect on heat transfer enhancement against a smooth surface is investigated. Heat transfer enhancement is found to decrease at high Re with the discrete rib configurations providing the best enhancement but highest pressure losses. Experiments to investigate heat transfer and pressure loss from jet array impingement are also performed on the target wall at Reynolds numbers up to 450,000. The heat transfer from a turbulated target wall and two jet plates is investigated. A target wall with short pins provides the best heat transfer with the dimpled target wall giving the lowest heat transfer among the three geometries studied.
Author : National Aeronautics and Space Administration (NASA)
Publisher : Createspace Independent Publishing Platform
ISBN 13 : 9781720482284
Total Pages : 64 pages
Book Rating : 4.4/5 (822 download)
Download or read book Effect of Film-Hole Shape on Turbine Blade Film Cooling Performance written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-30 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The detailed heat transfer coefficient and film cooling effectiveness distributions as well as tile detailed coolant jet temperature profiles on the suction side of a gas turbine blade A,ere measured using a transient liquid crystal image method and a traversing cold wire and a traversing thermocouple probe, respectively. The blade has only one row of film holes near the gill hole portion on the suction side of the blade. The hole geometries studied include standard cylindrical holes and holes with diffuser shaped exit portion (i.e. fanshaped holes and laidback fanshaped holes). Tests were performed on a five-blade linear cascade in a low-speed wind tunnel. The mainstream Reynolds number based on cascade exit velocity was 5.3 x 10(exp 5). Upstream unsteady wakes were simulated using a spoke-wheel type wake generator. The wake Strouhal number was kept at 0 or 0.1. Coolant blowing ratio was varied from 0.4 to 1.2. Results show that both expanded holes have significantly improved thermal protection over the surface downstream of the ejection location, particularly at high blowing ratios. However, the expanded hole injections induce earlier boundary layer transition to turbulence and enhance heat transfer coefficients at the latter part of the blade suction surface. In general, the unsteady wake tends to reduce film cooling effectiveness.Han, J. C. and Teng, S.Glenn Research CenterHEAT TRANSFER COEFFICIENTS; COOLANTS; TEMPERATURE PROFILES; SUCTION; TURBINE BLADES; HEAT MEASUREMENT; FILM COOLING; BOUNDARY LAYER TRANSITION; CASCADE WIND TUNNELS; CYLINDRICAL BODIES; EJECTION; GAS TURBINES; HOLE DISTRIBUTION (MECHANICS); LIQUID CRYSTALS; LOW SPEED; THERMAL PROTECTION; THERMOCOUPLES; WIND TUNNELS
Author : Charles F. Zalabak
Publisher :
ISBN 13 :
Total Pages : 32 pages
Book Rating : 4.3/5 (91 download)
Download or read book Effect of Blade-tip Crossover Passages on Natural-convection Water-cooling of Gas-turbine Blades written by Charles F. Zalabak and published by . This book was released on 1956 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A water-cooled turbine was fabricated and tested to determine the effect of a connecting passage at the turbine rotor blade tip between a radial coolant passage 0.10 inch in diameter (length-diameter ratio = 25.5) and radial coolant passages in the legnth-diameter range of 5.1 to 20.4. Coolant flow through the connecting passage is induced by free-convection forces in the radial passages.
Author : Srinath Varadarajan Ekkad
Publisher :
ISBN 13 :
Total Pages : 248 pages
Book Rating : 4.:/5 (258 download)
Download or read book Local Heat Transfer and Effectiveness Measurements on Film Cooled Turbine Blade Tip Models written by Srinath Varadarajan Ekkad and published by . This book was released on 1991 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author : Joon Ho Lee
Publisher :
ISBN 13 :
Total Pages : 102 pages
Book Rating : 4.:/5 (51 download)
Download or read book Measurement and Analysis of Gas Turbine Blade Endwall Heat Transfer written by Joon Ho Lee and published by . This book was released on 2001 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
