Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Magnetic Mirror Fusion Fission Early History And Applicability To Other Systems
Download Magnetic Mirror Fusion Fission Early History And Applicability To Other Systems full books in PDF, epub, and Kindle. Read online Magnetic Mirror Fusion Fission Early History And Applicability To Other Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Magnetic Mirror Fusion-fission Early History and Applicability to Other Systems by :
Download or read book Magnetic Mirror Fusion-fission Early History and Applicability to Other Systems written by and published by . This book was released on 2009 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the mid 1970s to mid 1980s the mirror program was stuck with a concept, the Standard Mirror that was Q (almost equal to) 1 where Q=P{sub fusion}/P{sub injection}. Heroic efforts were put into hybridizing thinking added energy and fuel sales would make a commercial product. At the same time the tokamak was thought to allow ignition and ultrahigh Q values of 20 or even higher. There was an effort to use neutral beams to drive the tokamak just like the mirror machines were driven in which case the Q value plunged to a few, however this was thought to be achievable decades earlier than the high Q versions. Meanwhile current drive and other features of the tokamak have seen the projected Q values come down to the range of 10. Meanwhile the mirror program got Q enhancement into high gear and various tandem mirrors projected Q values up towards 10 and with advanced features over 10 with axi-symmetric magnets (See R.F. Post papers), however the experimental program is all but non-existent. Meanwhile, the gas dynamic trap mirror system which is present day state-of-the-art can with low risk produce Q of (almost equal to)0.1 useful for a low risk, low cost neutron source for materials development useful for the development of materials for all fusion concepts (see Simonen white paper: 'A Physics-Based Strategy to Develop a Mirror Fusion-Fission Hybrid' and D.D. Ryutov, 'Axisymmetric MHD-stable mirror as a neutron source and a driver for a fusion-fission hybrid'). Many early hybrid designs with multi-disciplinary teams were carried out in great detail for the mirror system with its axi-symmetric blanket modules. It is recognized that most of these designs are adaptable to tokamak or inertial fusion geometry. When Q is low (1 to 2) economics gives a large economic penalty for high recirculating power. These early studies covered the three design types: Power production, fuel production and waste burning. All three had their place but power production fell away because every study showed fusion machines that were extensively studied by multidisciplinary teams came up with power costs much higher than for existing fission plants except in very large sizes (3 GWe). There was lots of work on waste burning - Ted Parrish - comes to mind. However, fuel production along with power production became nearly everyone's goals. First, fast-fission blankets were favored but later to enhance safety, fission-suppressed blankets came into vogue. Both fuel producing and waste burning hybrid studies were terminated with the advent of accidents, high interest rates, rising 'green like' movement and cheap natural gas for power production. For waste burning and fast-fission fuel producing designs, the blanket energy multiplication was about 10 and economics was OK relative to recirculating power for Q over 2. For fission-suppressed fuel producers, where the blanket multiplication is under 2, the Q needed was over 5. In the mirror program we came at this problem by trying to find a product for mirror fusion technology. We hoped we had a product and studied and promoted it. There was no market pull and when the mirror program collapsed in the US, so did both hybrid programs for mirrors and tokamaks and IFE by the mid 1980s. Today, the problem of what to do with wastes that were supposed to be accepted by the government appears to be a high value market pull. It remains to be shown if fusion neutrons can be generated at low enough cost so that economics will not be a showstopper. For burning only the minor actinides, the economics will be the most favorable. Burning the Pu as well will lower the number of fission reactors supported by each burner fusion machine and hurt economics of the system. The fuel-producing role of fusion to fuel fission reactors remains an important possible use of fusion especially in the early stages of fusion development. It is not clear that burning fission wastes in a fusion machine is more appropriate than burning these wastes in specially designed fission machines. Fusion can produce U-233 along with over 2.4%U-232 making the material largely nonproliferating and this material can in effect add neutrons to a fission reactor that would otherwise be short of reactivity to burn wastes. Similar ideas apply to Pu production. Unlike enrichment, producing U-233 does not burden the system with lots of U-238 with its source of more actinide wastes. The idea is fission plants are already designed and proven to fission at impressive power density and safety whereas fusion machines will have a harder time showing workability with thin walls separating the awkward geometry of the high curie inventory from the vacuum chamber that will get lots of radiation damage.
Book Synopsis Magnetic Fusion Technology by : Thomas J. Dolan
Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.
Book Synopsis Introduction to Plasmas and Plasma Dynamics by : Hai-Bin Tang
Download or read book Introduction to Plasmas and Plasma Dynamics written by Hai-Bin Tang and published by Elsevier. This book was released on 2024-05-09 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Plasmas and Plasma Dynamics: With Plasma Physics Applications to Space Propulsion, Magnetic Fusion and Space Physics, Second Edition provides an accessible introduction to the understanding of high temperature, ionized gases necessary to conduct research and develop applications related to plasmas. Thoroughly updated and expanded, this sec Describes plasma applications with close reference to elementary processes, promoting a deeper understanding of plasmas in new fields Provides structured problems in every chapter that help readers grasp the book’s practical lessons Includes a new chapter on numerical methods in plasmas that adds crucial context for experimental approaches
Book Synopsis Nuclear Technologies in a Sustainable Energy System by : W. Häfele
Download or read book Nuclear Technologies in a Sustainable Energy System written by W. Häfele and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: In March 1981 the International Institute for Applied Systems Analysis (IIASA) published the results of a global energy study looking fifty years into the future: Energy in a Finite World: A Global Systems Analysis (Cambridge, Massachusetts: Ballinger Publishing Co. , 1981)*. Not surprisingly, this book raises almost as many questions as it answers; thus, it defines a broad range of research topics that might be taken up by IIASA or other research institutions around the world. A 25-27 May 1981 workshop at IIASA entitled "A Perspective on Adaptive Nuclear Energy Evolutions: Towards a World of Neutron Abundance" was a beginning on one of these topics; it was organized by Wolf Hafele (Kernforschungsanlage Ji. ilich, Jiilich, Federal Republic of Germany, and IIASA) and Arkadius Archie Harms (McMaster University, Hamilton, Ontario, Canada). The origin of this workshop was the effort with in the IIASA energy study to explore possible "sustainable" global energy systems that might eventually replace the current "consumptive" system. In investigating the possible contributions nuclear technologies might make to a sustainable energy system, it had become clear that it is not so much particular, distinct technologies within the nuclear family that should be examined as a question of particularly advantageous configurations of mutually complementary technologies. Only when one considers exploiting a whole spectrum of arrangements of fission breeders, fusion reactors, and accelerators does the true potential of nuclear power become apparent.
Download or read book Nuclear Fusion written by C.M. Braams and published by CRC Press. This book was released on 2002-06-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion research started over half a century ago. Although the task remains unfinished, the end of the road could be in sight if society makes the right decisions. Nuclear Fusion: Half a Century of Magnetic Confinement Fusion Research is a careful, scholarly account of the course of fusion energy research over the past fifty years. The authors outline the different paths followed by fusion research from initial ignorance to present understanding. They explore why a particular scheme would not work and why it was more profitable to concentrate on the mainstream tokamak development. The book features descriptive sections, in-depth explanations of certain physical and technical issues, scientific terms, and an extensive glossary that explains relevant abbreviations and acronyms.
Book Synopsis Introduction to Plasma Physics and Controlled Fusion by : Francis F. Chen
Download or read book Introduction to Plasma Physics and Controlled Fusion written by Francis F. Chen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: TO THE SECOND EDITION In the nine years since this book was first written, rapid progress has been made scientifically in nuclear fusion, space physics, and nonlinear plasma theory. At the same time, the energy shortage on the one hand and the exploration of Jupiter and Saturn on the other have increased the national awareness of the important applications of plasma physics to energy production and to the understanding of our space environment. In magnetic confinement fusion, this period has seen the attainment 13 of a Lawson number nTE of 2 x 10 cm -3 sec in the Alcator tokamaks at MIT; neutral-beam heating of the PL T tokamak at Princeton to KTi = 6. 5 keV; increase of average ß to 3%-5% in tokamaks at Oak Ridge and General Atomic; and the stabilization of mirror-confined plasmas at Livermore, together with injection of ion current to near field-reversal conditions in the 2XIIß device. Invention of the tandem mirror has given magnetic confinement a new and exciting dimension. New ideas have emerged, such as the compact torus, surface-field devices, and the EßT mirror-torus hybrid, and some old ideas, such as the stellarator and the reversed-field pinch, have been revived. Radiofrequency heat ing has become a new star with its promise of dc current drive. Perhaps most importantly, great progress has been made in the understanding of the MHD behavior of toroidal plasmas: tearing modes, magnetic Vll Vlll islands, and disruptions.
Download or read book Tokamaks written by John Wesson and published by Oxford University Press. This book was released on 2011-10-13 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tokamak is the principal tool in controlled fusion research. This book acts as an introduction to the subject and a basic reference for theory, definitions, equations, and experimental results. The fourth edition has been completely revised, describing their development of tokamaks to the point of producing significant fusion power.
Book Synopsis Fundamentals of Magnetic Thermonuclear Reactor Design by : Vasilij A. Glukhikh
Download or read book Fundamentals of Magnetic Thermonuclear Reactor Design written by Vasilij A. Glukhikh and published by Woodhead Publishing. This book was released on 2018-05-21 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents
Book Synopsis Power Generation Technologies by : Paul Breeze
Download or read book Power Generation Technologies written by Paul Breeze and published by Elsevier. This book was released on 2005-02-04 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book makes intelligible the wide range of electricity generating technologies available today, as well as some closely allied technologies such as energy storage. The book opens by setting the many power generation technologies in the context of global energy consumption, the development of the electricity generation industry and the economics involved in this sector. A series of chapters are each devoted to assessing the environmental and economic impact of a single technology, including conventional technologies, nuclear and renewable (such as solar, wind and hydropower). The technologies are presented in an easily digestible form.Different power generation technologies have different greenhouse gas emissions and the link between greenhouse gases and global warming is a highly topical environmental and political issue. With developed nations worldwide looking to reduce their emissions of carbon dioxide, it is becoming increasingly important to explore the effectiveness of a mix of energy generation technologies.Power Generation Technologies gives a clear, unbiased review and comparison of the different types of power generation technologies available. In the light of the Kyoto protocol and OSPAR updates, Power Generation Technologies will provide an invaluable reference text for power generation planners, facility managers, consultants, policy makers and economists, as well as students and lecturers of related Engineering courses. · Provides a unique comparison of a wide range of power generation technologies - conventional, nuclear and renewable· Describes the workings and environmental impact of each technology· Evaluates the economic viability of each different power generation system
Book Synopsis An Assessment of the Prospects for Inertial Fusion Energy by : National Research Council
Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.
Book Synopsis The United States Air Force and the Culture of Innovation, 1945-1965 by : Stephen B. Johnson
Download or read book The United States Air Force and the Culture of Innovation, 1945-1965 written by Stephen B. Johnson and published by . This book was released on 2002 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Fusion written by Edward Morse and published by Springer. This book was released on 2018-10-15 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pursuit of nuclear fusion as an energy source requires a broad knowledge of several disciplines. These include plasma physics, atomic physics, electromagnetics, materials science, computational modeling, superconducting magnet technology, accelerators, lasers, and health physics. Nuclear Fusion distills and combines these disparate subjects to create a concise and coherent foundation to both fusion science and technology. It examines all aspects of physics and technology underlying the major magnetic and inertial confinement approaches to developing nuclear fusion energy. It further chronicles latest developments in the field, and reflects the multi-faceted nature of fusion research, preparing advanced undergraduate and graduate students in physics and engineering to launch into successful and diverse fusion-related research. Nuclear Fusion reflects Dr. Morse’s research in both magnetic and inertial confinement fusion, working with the world’s top laboratories, and embodies his extensive thirty-five year career in teaching three courses in fusion plasma physics and fusion technology at University of California, Berkeley.
Book Synopsis Encyclopedia of Sustainable Technologies by : Martin Abraham
Download or read book Encyclopedia of Sustainable Technologies written by Martin Abraham and published by Elsevier. This book was released on 2017-07-04 with total page 2276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Sustainable Technologies, Eight Volume Set provides an authoritative assessment of the sustainable technologies that are currently available or in development. Sustainable technology includes the scientific understanding, development and application of a wide range of technologies and processes and their environmental implications. Systems and lifecycle analyses of energy systems, environmental management, agriculture, manufacturing and digital technologies provide a comprehensive method for understanding the full sustainability of processes. In addition, the development of clean processes through green chemistry and engineering techniques are also described. The book is the first multi-volume reference work to employ both Life Cycle Analysis (LCA) and Triple Bottom Line (TBL) approaches to assessing the wide range of technologies available and their impact upon the world. Both approaches are long established and widely recognized, playing a key role in the organizing principles of this valuable work. Provides readers with a one-stop guide to the most current research in the field Presents a grounding of the fundamentals of the field of sustainable technologies Written by international leaders in the field, offering comprehensive coverage of the field and a consistent, high-quality scientific standard Includes the Life Cycle Analysis and Triple Bottom Line approaches to help users understand and assess sustainable technologies
Book Synopsis Controlled Nuclear Fusion by : Samuel Glasstone
Download or read book Controlled Nuclear Fusion written by Samuel Glasstone and published by . This book was released on 1968 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusion Energy Update written by and published by . This book was released on 1982 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-11 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Guide for All-Hazard Emergency Operations Planning by : Kay C. Goss
Download or read book Guide for All-Hazard Emergency Operations Planning written by Kay C. Goss and published by DIANE Publishing. This book was released on 1998-05 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meant to aid State & local emergency managers in their efforts to develop & maintain a viable all-hazard emergency operations plan. This guide clarifies the preparedness, response, & short-term recovery planning elements that warrant inclusion in emergency operations plans. It offers the best judgment & recommendations on how to deal with the entire planning process -- from forming a planning team to writing the plan. Specific topics of discussion include: preliminary considerations, the planning process, emergency operations plan format, basic plan content, functional annex content, hazard-unique planning, & linking Federal & State operations.
